XP pro Boot Disk

Can anyone tell me how to create a boot disk for xp pro?

No1_Barber
Not sure why you want this if it's to flash bios and you are using NTFS file system DO NOT use this disk
Place floppy in Drive A, open My Computer, right click on A, choose format option, select create MS DOS boot disk, job done
Pete

Similar Messages

Rebuild Mac Pro boot disk on a Mac Mini - possible?

Hello-
A friend has a Mac Pro 8-core with 10.6.2. The hard drive is showing some issues so I would like to rebuild the installation from scratch on a new drive. I have an intel mac mini and I'm wondering if it is possible to create a new boot disk (via external firewire enclosure) and do all the updates and software installation (Final Cut Studio, Adobe suite, etc) on the mac mini and then simply drop the new drive into the mac pro. Or is the software installation hardware specific?
Thanks for your help,
Mark

you shouldn't do that. first, there may be hardware problems due to difference in available hardware drivers if the mac pro is very new. also, if you do this the system will be identified everywhere including system profiler as mac mini. if you need to do it do it straight on the mac pro.

Is there any way to make a snow leopard partition on an early 2011 MacBook Pro that was upgraded to Lion, without the original boot disk?

So I have an early 2011 MacBook pro, I believe it shipped with snow leopard originally, as I purchased and upgraded to Lion fairly early on. I am trying to make a partition right now and have it run snow leopard so I can use programs that have PowerPC.
I should note, I replaced both the RAM and the harddrive in my Macbook pro. I changed from 4 GB of ram (that came shipped) to 8 GB of ram from a 3rd party, that I installed on my own months ago, have registered in the computer and have been working fine for quite some time now.
Also I should note I replaced my harddrive. I went from what ever the standard 500 GB harddrive that shipped with 15 inch early 2011 MB pro's. I now have a 3rd party SSD that's 240GB's that I also installed on my own, (at the same time as the RAM---Black friday items) The harddrive has been working just fine since then.
In installing the harddrive I borrowed a friends external harddrive and used a program called carbon copy cloner to get everything over to the SSD.
Now here is my issue. I have ordered the Snow Leopard (10.6.3) install disks from apple, I have created a partition on my SSD for snow leopard, but when I try to select the install disc for snow leopard at boot I get three beeps.
I know this issue has been posted elsewere but it said answered and the answer is no longer available. I also am unsure if any of the RAM or Harddrive swapping could have been causing the issue. I have the old harddrive and RAM still, but unfortunatley have no external harddrive anymore or money to afford one.
Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks).
Let me know If there is anything I can do. I'm a now broke college student so i'd like to spend as little $$$$ as possible
*PS I should also note the DVD drive is working fine, it reads the disk, the disk is brand new, it plays DVD's fine and has never had any issues in the years i've used it for similar tasks*
sorry for the long drawn out post, I just wanted to include as much as possible from what I've seen other people have issues with

BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

Help: Windows XP on MacBook Pro Boot Camp Partition via Target Disk Mode

Firstly, let me lay out my situation. I have an old MacBook Pro (2,2) with a broken disk drive. It was dropped in its youth and can no longer read from or write to CDs or DVDs of any kind. I have just recently bought a new MacBook Pro to replace it (6,2) and am currently trying to convert the old computer into an XP machine through Boot Camp. I'd like to be able to do so without having to buy an external disk drive.
After a clean install of OS X (10.6.3) onto the old machine, I successfully partition 85GB of space (although I previously attempted the same with a 32GB file system to no avail as well) for XP to be installed upon. Because I cannot boot my XP install disk directly from the broken disk drive, I then close Boot Camp Assistant and shut down the computer. I start it up in Target Disk Mode to be accessed from the new MacBook (6,2).
Once the old MacBook is connected, I insert my XP install disk into the new MacBook (6,2) and boot from the disk. After allowing the XP (Professional) boot to load the install files, I arrow-key down to my 85GB partition (FAT32, named standard as "BOOTCAMP") on the old MacBook (2,2)'s hard drive and select it as the partition I would like to install to. This is where I am directed to a new boot window that tells me in a series of paragraphs that the XP installer cannot reach the selected partition for what seems to be a number of reasons. What it seems to be trying to say to me is that it cannot do a remote install of XP on a Target Disk Mode-connected machine, while not "knowing" that I am trying to do so. It's a similar message to the one that Boot Camp Assistant shows when one tries to create a Boot Camp partition on a machine that is being accessed via Target Disk Mode (Apple puts it much more clearly than Microsoft).
I'd be perfectly content, albiet slightly vexed, to conclude here that it is not possible, shuttle over to the nearest Best Buy, and purchase an external disk drive if it weren't for one thing: I tried the same thing two weeks ago with Ubuntu 10.10 and it installed perfectly on the Boot Camp partition I had created then (I have since wiped all and installed OS X cleanly on the laptop).
Here comes the point/questions:
If the Ubuntu boot disk can access the partition, why can't the XP boot disk?
Is there some way to convince the boot system that the drive is local, rather than being accessed via Target Disk Mode?
Is there an easy solution that doesn't even require that, and will allow me to install to the disk over a firewire connection?
If anyone's knowledgeable and/or brave enough to tackle this one, I'll be eternally grateful. Heck, I'll be grateful if anyone even attempts to tackle it.
Thanks,
-Alec Page

Windows XP will only install from the optical drive. Target Disk Mode does not work with Windows volumes. Windows will not install from any external device.

How to make boot disk for MacBook Pro with Mavericks pre-installed

Hi -
I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0). I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion. In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk. In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed). I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks. Thanks very much for any help anyone can provide.
Shelly

Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Satellite Pro A200: Recovery using a network ghost boot disk

Hi all,
Need to ghost several sat pro a200 machines using a network ghost boot disk. when i use the ghost disk provided by ghost boot wizard and booting into PC dos i get the message "No Fast Ethernet PCI Adapter Found!" Serious Internal Error! (hardware works OK in XP/Vista)
i have tried booting from CD, Mem Stick and USB floppy with drivers from toshiba and realtek without any success, searches on google seem to point toward there needing to be a driver to interface with the cardbus / PCMCIA adapter - if this IS the case can anyone shed any light on the whereabouts of such a driver and how i could go about doing this?
Many thanks,
Gav Shakespeare.

Sorry folks answered my own question - the network card is reported as being an RTL8134 in windows XP but is in fact an RTL8100E/RTL8101E so i was using the wrong NDIS2 Driver!. doh!
emergency over.

Can a Mac Pro boot off a MacBook Pro in Target Disk Mode?

Summary: "Are you able to boot a Mac Pro off of a Mac Book Pro in Target Disk Mode?" OR "Will a Mac Pro boot off an OS X install that was made on a MBP?"
Details:
I'm finishing a music project that was created on a PPC G5 Quad computer and going to a studio in Santa Monica to complete the final mixdown. My 3rd party software plug-in configuration is unique, and the studio doesn't have all of the software instruments that I do on their 8 core mac pro. My G5 software installation is mirrored to my MacBook Pro, but the MBP doesn't have enough CPU power to play the project back.
Is it feasible to have the studio's 8 core Mac Pro boot from my MacBook Pros hard drive? Essentially, we'd be using my OS and software on their powerful CPU / hardware. I figure, since they are both Intel builds of OSX, this should be do-able.
I don't have access to the Mac Pro until I show up to start working.
Thanks for any input / suggestions!

The MacBook Pro boots fine in 10.5.8, and loads the Logic project without any faults. The only issue is that a CPU shortage occurs when you attempt to play the sequence.
Like you suggested, I performed separate UB installations of all the needed software on the MBP solely so I could move Logic projects from one computer to the next without a hitch. (Actually, DropBox does this for me). Migration assistant was not employed in this process due to the PPC / Intel issues you noted.
I didn't need to mention the G5 as it appears to have caused some confusion based on Kappy's reply, but I did want to explain my work flow thoroughly.
It sounds like booting the MacPro from my MBP is feasible. I'll mark this topic 'solved' and head over to the studio tonight. I'll post here any anomalies from the session (if any).
THANKS~!

Where can I get the Boot Disk for my macbook pro? Downloading OSX Lion is taking too long

I got a macbook pro that was owned by someone for a few days before. I tried to restore to factory setting but now downloading OSX Lion is taking forever with my internet connection. Can anyone help me find a boot Disk to speed up the process?

Apple no longer sells a Lion installation USB flash drive (they did at one time). SO you'll just have to wait for the download to complete. It's best to 'hard-wire' the download - not over wifi but with an Ethernet cable connected directly to your router. That will gain you some speed.
You could also try taking your MBP to a friend's home where they may have a faster Internet service. My download speed is 22+Mbps with my cable company - you may have a friend or neighbor who has something similar? Of course, you are always at the mercy of Apple's servers - sometimes they're just overloaded and a download that should take 20 minutes can take up to an hour and one-half.
Good luck,
Clinton

I am running OS X Yosemite on my four year old MacBook Pro which has become progressively slower and is loaded with applications I no longer use. I plan to start afresh by formatting a new 1TB SSD as a boot disk and reinstalling Lightroom 5 and PhotoShop

I am running OS X Yosemite on my four year old MacBook Pro which has become progressively slower and is loaded with applications I no longer use. I plan to start afresh by formatting a new 1TB SSD as a boot disk and reinstalling Lightroom 5 and PhotoShop CC.
Is there a list of the files and/or folders that contain Settings and Preferences which can be copied from the old system to the new?

with your cc apps you should try to use the sync feature. that's never worked consistently for me, but when it does work, it's helpful.
there are preference folders and presets and settings that you could copy but you're better off installing fresh because a common problem for people with adobe program issues is a settings issue.

My Mac book pro displays black screen says no bootable device insert boot disk. I have no boot disk to insert. What should i do.no bootable device"

My Mac book pro immediately displays black screen when I start up and says no bootable device insert boot disk. My question I don't have boot disk nor recovery disk to restore the system. Urgently needs your support and help. Thanks in advance. Michael l. Lluch

Hello
any chance you have try a bootcamp / win install into your Mac ??
if so
try this to boot into mac os
restart your mac , just after start up sound hold on "ALT" key to sart on drive manager
if that work select mac os volume using arrows key and validate by enter
HTH
Pierre

Why wont my brand new macbook pro boot to an external disk?

why wont my brand new macbook pro boot to an external disk? I have the 10.7.4 on both. The MBP came with it so I installed it onto the hard drive i have been using the same way with an older macbook pro but the new MBP does not see the startup disk. So i installed the same version of the os onto the MBP by hooking it up to my imac as a target disk because it would not recognize the install usb stick. Now the brand new MBP doesnt start up

I had the same issue. The 2012 macbook pro has a different 10.7.4 build that is not yet available for public release. It won't boot no matter how much you try. You need to wait for Mountain Lion and create a start up disk from ML. Apple most likely will release a 10.7.4 update for the 2012 models, but they are focused on ML now.

I replaced the screen on my late 2007 laptop, now it won't boot. It Bongs and the wheel turns and then it turns off. I have tried a tech tool pro 3 disk, no results tried the osX tiger disk no results but bong and wheel. any ideas?

I replaced the screen on my late 2007 laptop, now it won't boot. It Bongs and the wheel turns and then it turns off. I have tried a tech tool pro 3 disk, no results tried the osX tiger disk no results but bong and wheel. any ideas?
I have not tried disk warrior yet,but will. I had it stored until I could get screen, battery is dead, and to be honest I forgot which OS I have in it, If I can Get screen up maybe I can get my info.
sbckr

Hi there sbckr,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
-Griff W.

Selling my old mac book pro. I need to delete everything on the hard drive. any ideas ?I do not have the boot disks.

selling my old mac book pro. I need to delete everything on the hard drive. any ideas ?I do not have the boot disks.

If the Mac came w/system DVDs, you will need to obtain them prior to selling.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.
What to do before selling or giving away your Mac
Preparing an old Mac for sale
How to prepare your Mac for sale

Mac Pro screen displays "No bootable device - insert boot disk"

I was trying to install Windows 7 using boot camp and received the message that my hard disk drive had the wrong format. I was able to eject the windows install disk, but now the only message I get is No bootable device - insert boot disk on a black screen display.

Nah. BCA set the DVD to boot from.
You cannot have any other disk drive with GPT, so pull those.
you have to change BOOTCAMP from FAT to NTFS during install but then it sees other drives and stops you there
zap the pram.

Help creating a boot disk for ailing powerbook (and journalist!)

Hello, I'm a journalist with a desperate need to recover my Mac.
My Powerbook G4 (operating 10.4.8 I believe) was working fine until I did the latest suggested Mac software upgrade of Safari. Immediately Safari stopped responding hanging up or quitting. So I tried the next recommended update, thinking perhaps the two went together: Security 2008-009 I believe. It required a restart, which I did. (Note: I didn't do the recommended Java or Quicktime update at the same time because I'm currently working in Sierra Leone with terribly slow internet and figured I'd get to it later).
Now, however, the computer won't boot up. I hear the tone, I get the gray screen with the apple, I get the blue screen, I get the opening OS X screen and the blue progress bar, which then quits early on. Then I get a blue screen of alternating hues, which continues infinitely.
I tried all the Apple and web-suggested fixes. I cannot enter safe mode and can only perform functions with the single user mode. I've tried fsck and it said my HD is fine. The problem, I suspect, would be easy enough to fix if I could just reinstall OS X with my CD. However I am currently 7000 miles from home and CD, and in desperate need of my laptop in order to continue my volunteer work.
I do have access to a friend's MacBook Pro 10.4.9 and the internet. I have downloaded Carbon Copy Cloner... however I don't know which files I need to copy in order to create a boot disk. Nor do I know how to create a boot disk to actually put into my computer. I have also been scared by the CCC literature that says I need to erase the target volume... which in this case is my external hard drive containing all of our video footage from the last 8 months!
I use my computer every day, however I am a newbie at using things like Terminal and higher order functions that these occasions seem to require. CCC's Help manual, for me, might as well have been written in hieroglyphs (which, come to think of it, would have been easier as I seem to understand pictures well enough).
I would be eternally grateful for any simple or step-by-step advice which might help me get back to work. I'm training African journalists, and without my computer to edit, we cannot do a thing!
Thanks,
Kim

Here's some trouble shooting methods that I've copied from Apple KB articles:
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time. Release the keys.
If zapping the PRAM doesn't work, try resetting the PMU.
Warning: Resetting the power manager also resets date and time settings. Performing a PMU reset returns the iBook and PowerBook hardware, including NVRAM, to default settings and forces the computer to shut down.
PowerBook G4 (DVI) and PowerBook G4 (1 GHz/867 MHz)
If the computer is on, turn it off.
Disengage the two keyboard latches located between the Esc and F1 keys, and the F11 and
F12 keys. (You may also need to disengage the keyboard locking screw located between the
F5 and F6 keys.)
Lift the keyboard. To ensure no harmful static electricity is transferred to the computer,
properly ground yourself before performing this procedure.
Press and release the reset button located on the upper right side of the logic board near the power button, shown here. Wait 5 seconds.
Press the power button to restart the computer.
PowerBook G4 and PowerBook G4 (Gigabit Ethernet)
If the computer is on, turn it off.
Press and release the reset button located on the rear panel of the computer between the
external video and modem ports. Wait 5 seconds.
Press the Power button to restart the computer.
HTH!

XP pro Boot Disk

Similar Messages

Maybe you are looking for