XP Pro Install Hangs

I could not find anything on this in the knowledge base, but
I am trying to install on an XP Pro laptop, and the install hangs
on "Creating Coldfusion Directory Structure". I eventually have to
power down my machine to clear the install. Afterwards, Coldfusion
is partially installed but does not function.

When you installed it, do you see CFusionMX7 directory in
there? There should be an installation log file
Macromedia_ColdFusion_MX_7_InstallLog.log. Check to see what errors
or warnings you have in there.

Similar Messages

SunONE & 1.4.1_01 Win XP Pro install hangs

I have Windows XP Professional and am trying to install the
j2sdk-1_4_1studio_ce-4u1-bin-windows.exe
file so that I can jointly run SunONE and 1.4.1_01.
It is similar to the other installation problems on this forum that I have read about.
Things go fine, and it looks like it is installing properly, but then it hangs at 49% installed, with a message on the screen saying "Setting up Java 2 Runtime Environment. Please wait..." After waiting for a LONG time here, I cancel, and it looks like it is canceling -- the message box with the status bar goes away, but the "Setting up..." message does not.
I check the files installed and the Java directory is there.
So, I try to Restart, and then the message changes to "Java 2 Runtime Environment Setup Successful." But the machine does not restart.
I check the files installed and a new "Java Web Start" directory has appeared with files in it.
I then try restarting again. Nothing. I try "Turn Off", and that doesn't work either.
Therefore I have to turn off with the power button.
FWIW, I have both Netscape 7.0 and IE 6.0 installed.
Any ideas?

After more searching, I discovered the problem.
Netscape 7.0 always kept itself open in Quick Launch mode. It must be closed in order to install -- and the installation program does not recognize that the browser is open.

My Mac Pro is hanging after installing Mountain Lion

My Mac Pro is hanging and it started not long after I installed Mountain Lion. It seems to be related to Contacts in that it is constantly trying to sync with iCloud. It becomes unresponsive and when I force quit, other apps start going down. Eventually Mail hangs and I have to hit the power button and force a restart of the Mac Pro. It also brings down my DSL connection which runs through an Airport Extreme. Has anybody had similar experiences? Contrary to what it might say in my profile, I'm running a 2.8 Ghz Quad Core Mac Pro and 10.8.2.

Welcome. If you search for "Mountain Lion freeze" you will see you are NOT alone. But as far as I know there is no solution.

Premiere Pro CC hangs on splash screen "loading ExporterQuicktimeHost.bundle"

Premiere Pro CC hangs on splash screen "loading ExporterQuicktimeHost.bundle"
This happened before when I had CS6. I'm now using CC and haven't had problems until now. I again get the hang up while loading. Previously I trashed the loading ExporterQuicktimeHost.bundle file and this solved the problem.
I tried to contact support. I thought my subscription to CC included support, apparently not.
Anyone else have this Problem?
Brian

Thanks for the response Kevin.
I tried repairing permissions.
I recently installed OSX 10.8.4 but I've been succesfully using PP since then. PP is up to date v7.0.1
I have read the other forum posts on this.
Again, this problem cropped up using PP CS6, but I was able fix it using this procedure:
1. Go to Applications
2. Go to Adobe Premiere CS6
3. Right click on the application and click on “Show Package Contents”
4. Go to Contents –> Plug-ins –> Common
5. Move the following files to the desktop: ExporterQuicktimeHost.bundle and ImporterQuicktimeHost.bundle
6. Restart Adobe Premiere CS6 and it will successfully open up
This no longer fixes it.
I desperately need to get back to work.
Even though I feel Adobe support should be included in a CC subscription, I'm considering purchasing Adobe Bronze support with a max wait time of 4 hours and only alloted phone calls for $175
thanks anyway

Motion Content Install hanging at 100%

Hi, I just got Final Cut Studio 2.
The first installation disk ran smoothly, but after getting to 100% of Audio Content Disk 1, the install hangs and never finishes. This also happens when Im installing the Motion Content.
The DVD Studio Pro content went on without a hitch. (Iv yet to try Livetype)
Any idea why this is happening? Im installing all of the content to an external HD.
Thanks

Flakey install DVD?
Patrick

Install hangs at 11%

When trying to instal Designer install hangs at 11% while trying to instal pl/sql things. I am trying to install the suite on win xp pro machine. Does anybody knows the solution?
Primoz
Please excuse me if this is not the right forum.

Hello again Primoz,
Unfortunately, Oracle has a separate development and
testing team for installing the 9iDS pack with the
Oracle Universal Installer. We work closely with the
team and we are not aware of any problems for this
part of the install. It's possible that if you have
downloaded the iDS pack from OTN, your download may
be corrupted.
All I can suggest is that you post your query to the
Downloads disucssion forum (see 'OTN Member Services'
group on the forums menu) or see Metalink for more
information/support (http://metalink.oracle.com).
I will pass on your query to our testing team here
though for their reference and let you know if they
have any comments.
Sorry I cannot be of more help.
Regards,
Dominic
Designer Product Management

Mac pro still hangs on the blue screen on start up.

Hi.
my mac pro still hangs for ages on the blue screen before the login page where i input my password appears.
i've tried starting up in command-V and that didn't work.
i thought snow leopard was meant to improve, it has just slowed my start up down greatly!
could someone please advise on how to fix this?
thanks
Dan.

Hi boom,
Have you tried downloading and re-applying the latest Combo update?
If not, go to the apple download page, find the Combo update (couple of hundred MB) and install it.
This has fixed various issues in the past for numerous users... it might do the trick for you.
After it's installed and rebooted, repair permissions and reboot again.
Also check to see (using software update) if there are no firmware updates available for you.
And, make sure the OS drive's root is clean, just the basic Applications, Library, System and Users folders, no other mess. If there are 'Previous System' folders from earlier Archive & Install situations you might want to remove those.
Finally, if you upgraded from a PowerPC to Intel using the Migration Assistant the symptoms you are describing are very common, the migration assistant well... it ***** :/

PS CS4 upgrade install hangs while checking system profile

System is a Core 2 Duo 6700 with 4GB, XP2 Pro SP3.
Installing PS CS4 upgrade over CS3.
Downloaded file unpacks OK, but when running Setup the Checking System Profile bar gets to about 90% the PS Setup window flashes up for barely a second, then the install hangs, ie no further progress with the Checking System Profile (left if for 20 mins or so).
I've downloaded and run a new CS4 upgrade file from Adobe store. No change.
I've added SP3 (was on SP2), no change.
Any one seen this or have any ideas?
Thanks!

@Ender
I've been dragging through the installer mud for CS4 ever since a sunny summer day in 2007, so I clearly know some of that stuff... ;-) And sorry to say so, it's simply not the off-screen dialog problem in most of these cases (which a look at the installer logs would very likely confirm). We can discuss this further off-list, if you feel like it, so shoot me a mail to mylenium|-|at|-|mylenium.de. I sure would like to get to know some of the Photoshop-Aliens a bit better (as someone rooted in the video, compositing and 3D world) :-D
@Mike
Simply move them all out of the way or rename them and see what happens. The installer will create the folders again if needed and if e.g. you still need to run CS3, simply renaming/moving them back to their original state will still work (as long as you don't touch any folders related to licensing or shared core functions such as Anchor Service or Linguistics). If you're not feeling adventurous, then call support, they will provide you with more detailed explanations and hold your hand ;-)
Mylenium

OUI patch install hangs, files being used by another application

Hi when a patch install hangs, and the OUI error message is that files needing to be reinstalled are being used by another application, how can you identify which files or processes are responsible so that they can be shut down? All normal Oracle services and DTC are shut down already.
This is patch 6810189 upgrade to 10.2.0.4 (from 10.2.0.3) which includes the April CPU on a Win32 server.

Please check any oracle service is still on ..
need to shutdown listener/oracle service .. and other db service belongs to Oracle.
You can download windows process explorer and check for any oracle process and kill those and then apply CPU
Link :
http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
--Girish

P35 Neo - XP Pro install fatal error

Hello
I have partially duplicated my post since the problem is different from the original thread.
But first....
MOBO - P35 Neo - MS-7360
CPU - Intel Core 2 Duo E6750
BIOS - V1.5
MEM - 4 x 1Gb 800Mhz DDR2
HDD - 1 x 250 Gb Maxtor SATA II (I have 2 but only connecting 1 for install.)
VGA - NVidia 8600 GT
PSU - WinPower ATX 600L - 600W max
Optical - Emprex 8x CD/DVDRW
The motherboard package and RAM was bought from Novatech and was tested before I installed it. Full specs can be seen here
http://www.novatech.co.uk/novatech/specpage.html?MBB-P35675,
and I got them to double up on the RAM.
HDD was also from them.
The problem arises after the first phase of the XP PRO install. I have been using a new copy of XP PRO with SP2 to do the install and initailly things go as expected. I format and partition the drive to create a 50Gb drive for the XP install, which happens without incident, then the machine reboots. Following reboot, the Windows XP branded part of the installation begins, with the 'Collecting information', 'Dynamic Update' and the 'Preparing installation' boxes already checked. Below these, it says that 'Setup will complete in approximately :39 minutes'. About 30 secs into this process, a message box comes up with the following;
Fatal Error
An error has been encountered that prevents setup from continuing.
One of the components that Windows needs to continue setup could not be installed.
Incorrect function.
Clicking on the OK box takes you to the logfile, which reads;
Error:
Installation Failed: D:\I386\asms. Error Message : Incorrect function.
Fatal Error:
One of the components that Windows needs to continue setup could not be installed.
Incorrect function.
Pressing OK after this reboots the machine and we go round again.
Things that I have tried to fix this:
1. Removed RAM, tried it with 2 and 1 DIMMs
2. Changed the optical drive.
3. Burned another copy of XP with SP2 at slower speed to ensure it wasn't the CD.
4. Used another HDD with same specs.
5. Scoured these forums and the net to find an answer, but nothing clear cut has arisen. Or have I missed it?
There have been a few threads which mention putting extra drivers into the XP PRO SP2 .iso, but since I am using 1 drive on SATA1 as well as an XP PRO with SP2 disk, this does not appear to be required. I have used the standard settings in the BIOS. Can anyone shine some light on what I am doing wrong?
Thanks for reading!

Sounds like it may be a optical drive or a bad ISO. Seems like people are having issues using Nero and recommend using PowerISO. edit: I noticed you you are using an OEM CD so more than likely either a scratched CD, a bad drive or cable.
Read this: http://www.nocrash.com/ncbbs/msgs/1075.shtml

Windows 7 install hangs at "Windows is loading files ..." on MBA

I have been trying to install Windows 7 Ultimate but each time the install hangs at "Windows is loading files ..." on reboot. I am using a Windows install DVD using an external drive. When the install hangs, the DVD is not being accessed. I have tried several times and it leads to the same result. I have tried different partition sizes (20 GB - 50 GB), no luck.
Any help would be greatly appreciated.

Solution
I have a macmini bought in mid2011 with OS Lion on it. AS it doesnot come with an optical drive, I bought an LG DVD drive and used the windows 7 (64bit) installation DVD. It stopped at windows is loading files....
I tired couple of other options like using flash dirve but it dint work.
The I went to Apple's Genius Bar, and they put the installation dvd into their dvd drive (by Apple). Then the windows installed perfectly fine.
When asked they said it must be the problem of DVD and I found out that it actually is the cause. Apple products require dual layer optical drives but in general the optical drives we buy can only read single layer dvds. So I got to fix the problem by borrowing their dvd drive in genius bar and now i m good to go.....
Hope this helps

New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this?

New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this? Is this a conflict with win 8.1 pro?

You need to adjust your security stuff/ permissions and possibly use compatibility modes. It means that your licensing service is being blocked/ shut down.
Mylenium

Yoga 2 Pro : BIOS Update on a clean Windows 8.1 Pro install

Hi,
I recently bought the Yoga 2 Pro. Like everybody I have the yellow problem.
After buying it, I reinstalled my computer with a fresh Windows 8.1 pro install.
I was wondering if anybody has already tried updating the BIOS on a clean Windows 8.1 install ?
And also if there is any reported bug with the BIOS update.
I already crashed a while back one of my previous computer and I would prefer if this don't append again
Thanks,
Best,

Not, i'm speaking about the BIOS update. The windows 8.1 pro installation was fine.

Crypto failure when upgrading Windows 8.1 Pro install to Windows 10 Tech Preview 10041

Has anybody experienced the following error when trying to upgrade a Windows 8.1 Pro install to Windows 10 Tech Preview 10041
crypto_self_test_failed
The system reboots twice both times with the same error and then reverts back to Windows 8.1 Pro. This occurs during the upgrade process. Windows 10 never installs.
Thoughts? Suggestions?
Thanks
Eric Sten

Hi Eric,
It seems to be the upgrade self-test fails.
For testing Windows 10, you may consider take use of Hyper-V and install a VM of Windows 10:
Step-By-Step: Creating and Running A Windows 10 VM on Windows 8.1
Or try a dual boot:
How to Dual Boot Between Windows 7 (or Windows 8.1) and Windows 10 Technical
Preview (VHDX)
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

64 bit OEL install hangs at installing dogtail in OVM 2.2

I recently upgraded my server to OVM 2.2 and swapped out the dual core AMDs to quad core AMDs at the same time.
Since then I have been unable to create any 64 bit OEL servers. In every instance the install hangs when Installing dogtail-0.6.1-2.el5.noarch
This used to work at 2.1.5 and I can deploy the existing templates, but they are OEL 5.3.
VM-Server Specs
[root@vm-server ~]# uname -a
Linux vm-server 2.6.18-128.2.1.4.9.el5xen #1 SMP Fri Oct 9 14:57:31 EDT 2009 i686 athlon i386 GNU/Linux
[root@vm-server ~]# lspci
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:06.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
01:07.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
03:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
03:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
06:00.0 RAID bus controller: Silicon Image, Inc. Unknown device 0242 (rev 01)

2 new updates
1) I get the same errors when trying a command line install
2) I can successfully create fully virtualised VMs
So if all else fails I can create fully virtualised VMs and then convert them, which is a bit of a pain but will at least give me working templates.

XP Pro Install Hangs

Similar Messages

Maybe you are looking for