XP Quicktime Installer problem - wants 141MB??

Hi, I'm trying to install quicktime on an XP thin client from HP.
When I try to run the installer, it claims to need 141MB of free space, and only 132MB is available on the computer. It won't let me complete the installation due to this error.
However, the installer needing 141MB of space seems like a bug in the installer, especially when you consider the installer itself in less than 20MB!!
I need someone from Apple to confirm the installer actually needs 141MB to install, and if so, how it can be cut down to a more manageable size, especially if all you really want are browser plug ins for IE.
Cheers!
Dave

I downloaded the Windows installer for "Quicktime only" not the quicktime / iTunes. Although I see what you're saying.
I did deselect an option in the installer to install the Apple updater, thinking it would reduce the requirements...
Did you have a URL for an alternate package?
Cheers!
Dave
Powerbook Mac OS X (10.4.8)

Similar Messages

Quicktime installation problem

after doing a system restore my itunes will not open says itunes has encountered a problem and needs to close. i am sure its to do with quicktime as i have uninstalled itunes then reinstalled but when quicktime downloads a error message comes up saying quicktime has not been installed proberly. i have tryed to remove quicktime from my computer but it will not delete keeps saying fatal error during installation ?? can anyboby help, i've tryed troubleshooting pages but this problem is not there ??

With this one, it is usually best to do a complete removal of iTunes and Quicktime with installer cleanup, then a phased reinstall.
Here is the method:
Download a fresh copy of iTunes and the stand alone version of Quicktime
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
XP
http://docs.info.apple.com/article.html?artnum=93698
Vista
http://docs.info.apple.com/article.html?artnum=305409
If you hit a problem with one of the uninstalls don't worry, carry on with the deleting of files and folders as directed in the method.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Quicktime installer problems - transform path error

Hi
Been using quicktime for a while...finally installed the new itunes/quicktime version from apple..then got the message that i needed version 7.0.3...so downloaded it and before it downloaded it it removed my quicktime..but when i tried to install it again i got the following message:
Error applying transforms. Verify that the specified transform paths are valid.
C:\WINDOWS\Installer\{3868A8EE-5051-4DB0-8DF6-4F4B8A98D083}\1033.MST
If anyone knows what to do to resolve this issue..i'd very much appreciate it.
Thanks
Jay

I don't have a solution but found the exact same problem when I was testing security update 1 for a customised 8.1.2 deployment.
I have decided NOT to deploy the update until it is fixed (or released as an MSP file so I can patch the MSI)
I tried to contact Adobe support (UK) but they were not interested as we don't have a support contract :-(

ITunes + QuickTime installation Problem

I've got an iPod Nano as a present but I'm unable to download iTunes to play it on because of a problem with Quicktime.
When I try to download iTunes + Quicktime the following error comes up:
Could not open key:
HKEYLOCALMACHINE\Software\Classes\QuickTimePlayer.Lib.QuickTimePlayerApp/CSLID Verify that you have sufficient access to that Key or contact your support personnel
I've tried uninstalling QuickTime complety but it doesn't work.
Any help would be much appreciated!
Cheers!

I had also had a problem with iTunes and discovered that Quicktime may be the culprit. iTunes appears to successfully install but, when I launch it, I get this message, “ iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.”
I have tried the Solutions to Common Installation and Launch Errors and have not solved the problem.
O I tried to completely remove iTunes and QuickTime and reinstall (While during that I did not find a QuicktimeVR file to delete). That did not work.
O I tried to empty my Temp directory but, I could not delete all the files. Same problem occurred when I reinstalled iTunes.
O I tried to install QuickTime without iTunes and it would not install. I got a message from QuickTime for Windows saying, “A newer version of QuickTime is already installed. This installation cannot proceed while the newer version of QuickTime is installed.”
O When I try to launch QuickTime from the program list, Windows cannot locate the QuickTimePlayer.exe.
O When I try to uninstall QuickTime, I get the following message, “The following file does not exist or is not a valid uninstallation log file.
C:\WINDOWS\system\QUICKT~1\UNINST`1.LOG
I would appreciate any help!

Itunes & Quicktime Installation Problems

I had the old itunes, but i want a new ipod and they will not run with old itunes. When i tried to update, it would not install. This happened when i first got itunes and we had to change registry files, i looked for the article i used last time to help me change them but could not find it again.
It said this:
HKEYLOCALMACHINE\SOFTWARE\CLASSES\QUICKTIMEPLAYERLIB.QUICKTIMEPLAYERAPP\CLSID
i have installed itunes and quicktime and deleted all files as a article on itunes support told me - now i can't play any of my music!
If you could help i would appreciate it so much
Cheers
Advent T12 Windows XP
Advent T12 Windows XP

fingers crossed, this is the article you were looking for:
QuickTime or iTunes Installer "Could not open key" alert stops install on Windows

QuickTime installation problem on Windows 7 (64 bits)

I can not seem to install Quicktime on my computer. I get the following message : An error occurred during the installation of assembly Microsoft.VC80.CRT, Version=8.0.50727.4053,type=Win32, PublicKeyToken=1fc8b9a1e18e3b,process or architecture=X86, Please refer to help and Support for more information. HRESULT : 080070422. Any help greatly appreciate, especially considering it seems there is no official help to turn to.

Hello again,
I am not sure what to make of what came out. I first typed scan/now, and he told me that the Windows resource protection had not been able to start the repair service. I then typed scan / now (adding extra spaces between the characters), and he gave me what seems to be a menu of commands. Here is the whole thing (in French) I'm afraid :
Microsoft Windows [version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. Tous droits réservés.
C:\Windows\system32>
C:\Windows\system32>sfc/scannow
La protection des ressources Windows n'a pas réussi à démarrer le service de réparation.
C:\Windows\system32>sfc / scannow
Vérificateur de ressources Microsoft(R) Windows(R) version 6.0
Copyright (c) 2006 Microsoft Corporation. Tous droits réservés.
Analyse l'intégrité de tous les fichiers système protégés et remplace
les versions incorrectes par les versions Microsoft appropriées.
SFC [/SCANNOW] [/VERIFYONLY] [/SCANFILE=<fichier>]
[/VERIFYFILE=<fichier>]
[/OFFWINDIR=<répertoire Windows hors connexion>
/OFFBOOTDIR=<répertoire Windows hors connexion>]
/SCANNOW Analyse l'intégrité de tous les fichiers système
protégés et répare les fichiers endommagés dès que
possible.
/VERIFYONLY Analyse l'intégrité de tous les fichiers système
protégés. Aucune réparation n'est effectuée.
/SCANFILE Analyse l'intégrité du fichier référencé et le répare
si des problèmes ont été identifiés. Spécifiez le
chemin d'accès complet dans <fichier>.
/VERIFYFILE Vérifie l'intégrité du fichier ayant comme chemin
complet <fichier>. Aucune réparation n'est effectuée.
/OFFBOOTDIR Pour les réparations hors connexion, spécifier
l'emplacement du répertoire de démarrage hors
connexion.
/OFFWINDIR Pour les réparations hors connexion, spécifier
l'emplacement du répertoire Windows hors connexion.
Exemples :
sfc /SCANNOW
sfc /VERIFYFILE=c:\windows\system32\kernel32.dll
sfc /SCANFILE=d:\windows\system32\kernel32.dll
/OFFBOOTDIR=d:\ /OFFWINDIR=d:\windows
sfc /VERIFYONLY
C:\Windows\system32>
Needless to say I have no idea what to do next.
Thanks,
Edouard

Quicktime 7.0.3 installation problems - error 1606

Well I've just downloaded the latest iTunes with Quicktime 7.0.3 but am having a **** of a time getting the latter installed. iTunes will install, but then gives me a -3 error when trying to install Quicktime. So I tried downloading and installing the standalone Quicktime 7.0.3 program, but am having no more joy with that. If I try that, I get the error message:
Error 1606.Could not access network location QTComponents\
If I click ok then I get:
Error: -1603 Fatal error during installation
I've tried using the Installshield support website to help me, but with absolutely no luck whatsoever (http://consumer.installshield.com/kb.asp?id=Q110724). If anyone can advise me here it would be greatly appreaciated. Many thanks in advance. I have also tried disabling my Avast antivirus while I install, but to no avail.
Many thanks to anyone out there who might be able to help me.
Link to the original message in the iTunes forum:
Adam Carrico, "Quicktime 7.0.3 installation problems - error 1606" #1, 08:42pm Oct 15, 2005 CDT

I am having exactly the same problem. I also tried installing the Standalone QuickTime but got the same problem, same message. I haven't a clue where to go from here. It's really disappointing, I've only just started using iTunes and now I can't update my new iPod.
If anyone has a solution/suggestion to this problem it would be greatly appreciated. Thanks.

Installing iTunes 5 - Hanging at Quicktime Installation

I was posting in another thread for a while, but now the thread was deleted due to no technical problems asked or something along those lines. The problem I have with iTunes is installing it - it hangs at the Quicktime installation point, and doesn't end.
I really didn't want to resort to changing my system settings, but if there are any safe methods to try and fix it, that would be good. I know there were some people with the same problem, but I don't know where the thread ended up.
I've installed the newest iTunes 5.0.1.4 or whatever it is, and that doesn't make any difference.
As I said in the thread that got deleted, Apple should really release a version of iTunes that is essentially the same as iTunes 4.9, but with the new skin of iTunes 5. This is my opinion. It is obvious that the workings of iTunes 5 was changed quite drastically, and this seems to be causing the problems. If it had the same workings of 4.9 and the skin of 5, surely we would have the best of both worlds. This would buy Apple some time to sort out v.5 fully, and keep their customers happy in the meantime.
I've read some stories on this forum and was shocked by how people were forced to buy new routers, hard drives etc. because of this problem. It really is terrible that they had to fork out so much money. And I can't believe that people were told they must pay $50 to talk to the customer services.
Right, I've kind of gone off topic a bit and I don't want this thread to get banned also, so, if anybody could please give me advice on how to get my iTunes to install I would be very grateful. Thankyou.

Ok do this...
1. Make sure you have that file called "mapi32.dll" found in your Windows/system 32 folder.
If you cant find it let me know, I can guide you through it.
Next, make sure All these are started: TCP/IP NetBIOS Helper, Windows Management Instrument, and WMI Performance Adapter.
How to do this: Click on the Start Menu;Right Click on my computer and then choose manage in that menu. In the left hand panel click "services and applications" and double click services. Find those files and then click them and see if they say started and automatic.
Next: download QuickTime 7 stand alone. http://www.apple.com/quicktime/download/standalone.html
If you are running mcafee or nortons, disable your firewall, antivirus and all that. Then restart
Next: Download Bonjour for Windows. Heres the link: http://www.apple.com/quicktime/download/standalone.html
Restart your computer. Remember if you have that anti virus crap, turn it off for the DL.
Next: Download apple itunes and restart, turning off all virus programs again. It should work from there. Good luck

Quicktime Installation Type

I am trying to install quicktime, but I need to install the full version instead of the 'basic version' because I believe I need the 'authoring components' in order to run exportfm plugin from FM Pro 7. The problem is that the only option during installation is 'basic' and I'm guessing that these authoring components are not included in the basic version. Do I need to buy QT Pro to have the choice of 'basic', 'full' or 'custom' install?
Many Thanks
macbok pro Mac OS X (10.4.8)

I am trying to use a function in filemaker called convertimage. I get the error message 'The required QuickTime resources are not available. A full installation of QT 4.0 or greater is required. ExportFm's ConvertOmage function cannot be used'. I found the following discussion (see below) and so am trying to uninstall and reinstall QT in a full version. I have trashed my previous QT and now just need to reinstall, I think, so that I can see if this helps.
Discussion Excerpt:
[Q: QUICKTIME
In the MediaManger demo files, I can't run most of the examples. I keep getting the message that 'The required QuickTime resources are not available.' What do I need to do?
A: Several of MediaManager's commands (such as ConvertImage) require QuickTime to work.
If you do not already have this installed on your computer, the installer can be downloaded for free at .
You need to make sure you are installing the FULL version of QuickTime. For the QT-dependent commands to work, MediaManager needs components of QuickTime called the Authoring Components. These are automatically installed with the full version. During the installation process, the installer will show a screen asking you if you want to do a minimum, full, or custom installation. The default is set to minimum. You must manually select the full installation before proceeding with the installation process. When the installation is complete, you will need to restart your computer.
Q: QUICKTIME
I just installed QuickTime, but the ConvertImage command still doesn't work. What's wrong?
A: As mentioned above, you must install the full version of QuickTime, which automatically includes the Authoring Components, for MediaManager to work properly. You may have installed only the minimum version of QuickTime, which will not allow MediaManager to perform its ConvertImage command. During the installation process, the QuickTime installer shows a screen asking you if you want to do a minimum, full, or custom installation. The default is set to minimum. You must manually select the full installation before proceeding with the installation process. When the installation is complete, you will need to restart your computer.
Q: QUICKTIME
I realized that I only had the minimum version of QuickTime on my machine, so I just installed the 'full' version of QuickTime. But MediaManager still isn't working. Why?
A: You may need to first UNinstall the older QuickTime files before installing the full version. The QuickTime installer won't always update all files if it encounters previously installed QuickTime files. We've found that the only way to make sure all of the "full" files get installed is to first uninstall all QuickTime files. Even though the uninstaller will try to warn you against completely uninstalling all QuickTime files, go ahead and do it anyway. We've never come across any problem doing this. Then immediately follow up by doing the full install, and then restart your computer.]
macbok pro Mac OS X (10.4.8)

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

SAP 4.7 Installation problem on Solaris 10 - Oracle 9.2.0.7

Hi,
I am trying to install SAP 4.7 on Solaris 10 - Oracle 9.2.0.7. I am using standar installation DVD for SAP 4.7 SR1. After installation I want to login SAP system I have an error about database inconsistency. System said that enter SICK transaction. I entered SICK and my error is "OS release SunOS 5.10 Generic_141444-09 sun4u is not support with this kernel". After I received this error I installed new kernel (221) and I upgaded kernel to 221. But after that I could not open SAP system. I checked dev_w1 and it is like below:
"dev_w1" 456 lines, 18662 characters
trc file: "dev_w1", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
M sysno      00
M sid        KZP
M systemid   370 (Solaris on SPARCV9 CPU)
M relno      6400
M patchlevel 0
M patchno    221
M intno      20020600
M make:      single threaded, Unicode, 64 bit
M pid        22022
M
M
M Fri Jan 29 15:11:00 2010
M ***LOG Q01=> tskh_init, WPStart (Workproc 1 1 22022) [thxxhead.c   1144]
M calling db_connect ...
C Got ORACLE_HOME=/oracle/KZP/920_64 from environment
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPKZP's password
C Connecting as /@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 0x10667d250 0x10668fcd0 0x10668f668
C Attaching to DB Server KZP (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8)
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now '/@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Got SAPKZP's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0x10668f598,usrhp=0x10669a800)
C Now I'm disconnected from ORACLE
C Connecting as SAPKZP/<pwd>@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 UTF8                                                      1 0x10667d250 0x10668fcd0 0x10668f668
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now 'SAPKZP/<pwd>@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance KZP is running on sapkzpn2 with ORACLE version 9.2.0.7.0 since JAN 29, 2010, 15:10:46
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20100129 151100 sapkzpn2
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip
,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Fri Jan 29 15:11:07 2010
I MtxInit: 1 0 0
M SHM_PRES_BUF                 (addr: 0xffffffff7597a000, size: 4400000)
M SHM_ROLL_AREA                (addr: 0xfffffffe56000000, size: 134217728)
M SHM_PAGING_AREA              (addr: 0xffffffff62000000, size: 67108864)
M SHM_ROLL_ADM                 (addr: 0xffffffff75db0000, size: 2672386)
M SHM_PAGING_ADM               (addr: 0xffffffff71f00000, size: 656416)
M ThCreateNoBuffer             allocated 572152 bytes for 1000 entries at 0xfffffffe4e004000
M ThCreateNoBuffer             index size: 3000 elems
M ThCreateVBAdm                allocated 12176 bytes (50 server) at 0xffffffff7bc00000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 1, WP_CNT = 8, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0xffffffff60000100, size: 30000000, end: 0xffffffff61c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0xffffffff6d400100, size: 10240000, end: 0xffffffff6ddc4100)
B dbexpbuf: Buffer EIBUF (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
B dbexpbuf: Buffer ESM   (addr: 0xfffffffe5f000108, size: 4194304, end: 0xfffffffe5f400108)
B dbexpbuf: Buffer CUA   (addr: 0xfffffffe5101e108, size: 3072000, end: 0xfffffffe5130c108)
B dbexpbuf: Buffer OTR   (addr: 0xfffffffe5e800108, size: 4194304, end: 0xfffffffe5ec00108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Fri Jan 29 15:11:08 2010
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x106aa11e0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0xfffffffe51310070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0xfffffffe513103c8
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Fri Jan 29 15:11:09 2010
A
A -PXA--
A PXA INITIALIZATION
A System page size: 8kb, total admin_size: 5512kb, dir_size: 5480kb.
I *** ERROR => shmget(10006,153600000,2016) (22: Invalid argument) [shmux.c      1525]
A RABAX in run level 1
A RABAX in unkown environment: task_type=0, run level=1, rabax state=80000000 ztta_task_type=0
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffd740, 0x1004a4ae4, 0x0, 0x105dbb180, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d60, 0x0, 0x17400, 0x102e947dc, 0x0, 0x102e2f6e0 ), at 0x1004a4680
[2] __1cXrabax_CStackToTraceFile6F_v_ ( 0x0, 0x1, 0x0, 0x3097000, 0x100000000, 0x103097058 ), at 0x100ae0e80
[3] __1cKrabax_init6FpkH_v_ ( 0x102002ad8, 0x0, 0x1, 0x0, 0x0, 0x0 ), at 0x100ad97d8
[4] ab_rabax ( 0x0, 0x80000000, 0x6da, 0x103879400, 0x1880, 0x1065e4110 ), at 0x100acfe3c
[5] __1cJab_pbinit6F_v_ ( 0x100000000, 0x102e947dc, 0x1, 0x102002ab4, 0x102f4e1c0, 0x103815550 ), at 0x100750de0
[6] ab_init ( 0x0, 0x5bd5000, 0xac8800, 0x5bd5000, 0x1, 0x0 ), at 0x100ac8d34
[7] ThrInitRunTime ( 0x100489c00, 0x489c00, 0x332c400, 0x102e94820, 0x1, 0x102e947d4 ), at 0x100476e84
[8] ThStartUp2 ( 0x101fec800, 0x194c800, 0x100000000, 0x102e947d4, 0x0, 0x10194cc00 ), at 0x100415860
[9] tskh_init ( 0x2e7a000, 0x1, 0x1, 0x540, 0x102e94400, 0x15 ), at 0x100260f14
[10] tskhstart ( 0x0, 0x2e94400, 0x0, 0x1003d6400, 0x3d6400, 0x100000000 ), at 0x10025cf9c
[11] DpMain ( 0x3641400, 0x2e7a000, 0x100000000, 0x1, 0x0, 0x0 ), at 0x1001856c0
A
A Fri Jan 29 15:11:10 2010
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX failed.
A *** suicide ON
A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD failed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
X *** ERROR => invalid MM administration (adm) (nil) (admCheck)(nil) [mmxx.c       2127]
A ** RABAX: level LEV_RX_WRITE_SNAP failed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Fri Jan 29 15:11:10 2010
A
A Error Code PXA_NO_SHARED_MEMORY.
A Module $Id: //bas/640_REL/src/krn/runt/abload3.c#44 $ SAP.
A Function ab_pbinit Line 1754.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS failed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_SUICIDE
A Shared Memory von 150000 Kilo-Bytes f\303\274r PXA nicht verf\303\274gbar..
A
A *
A * Non recoverable error. Aborting process...
A *
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c   15213]
M in_ThErrHandle: 1
M *** ERROR => ThWpHalt: halt wp (step 1, th_errno 5, action 2, level 1) [thxxhead.c   9696]
M
M Info for wp 1
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = 1
M    mode = 0
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M
M PfStatDisconnect: disconnect statistics
M ThIErrHandle: action changed to 2
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M ThErrPrivHandle: set th_errno (5)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (5), detach T1/M0 [thxxhead.c   10129]
M
M Modeinfo for User T1/M0
M
M
M call ThrShutDown (1)...
A Saving PXA statistics.
M -
C-STACK -
[0] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c108
[1] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[2] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
M -
M ***LOG Q0E=> SigIGenAction, signal ( 11) [sigux.c      902]
M in_ThErrHandle: 2
M ***LOG R0H=> ThIErrHandle, Loop in ThErrHandle, restart wp () [thxxhead.c   9717]
M -
C-STACK -
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffc340, 0x1004a4ae4, 0x0, 0x105dbac40, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d00, 0x0, 0x17400, 0x102e947dc, 0x10049d16c, 0x102e2f6e0 ), at 0x1004a4680
[2] ThIErrHandle ( 0x0, 0x100000000, 0x3, 0x10331ff08, 0xb, 0x4 ), at 0x100291b08
[3] SigIGenAction ( 0x102c9f800, 0x1032acd04, 0x102c9f800, 0xb, 0x102e94820, 0x102e947d4 ), at 0x101e49c4c
[4] __sighndlr ( 0xb, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0x101e493bc, 0x0, 0x0 ), at 0xffffffff7c7d62e0
[5] call_user_handler ( 0xffffffff7d300200, 0xffffffff7d300200, 0xffffffff7fffcca0, 0x19, 0x0, 0x0 ), at 0xffffffff7c7c9e44
[6] sigacthandler ( 0x0, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0xffffffff7d300200, 0x0, 0xffffffff7c93c000 ), at 0xffffffff7c7ca03
c
[7] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c0f4
[8] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[9] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
[10] __1cIrabax_do6FpkHpHi_v_ ( 0x102002ad8, 0x0, 0x41, 0x102e94800, 0x1, 0x1 ), at 0x100adc154
[11] ab_rabax ( 0x2, 0x2e94800, 0x1, 0x100000000, 0x2e94400, 0x2e94400 ), at 0x100ad3bc4
M -
M Fri Jan 29 15:11:11 2010
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 1
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = 1
M    mode = 0
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 22022) [dpuxtool.c   318]
Also I tried to change SAPEXE.SAR and SAPEXEDB.SAR files from SAP Kernel CD. After that I started installation again. But I have same error. SAP system didn't work.
How can I solve this error?Cannot I install SAP 4.7 SR1 on Solaris 10 - ORacle 9.2.0.7?Is the problem about SAP profile parameters or Solaris Kernel parameters
Best regards,

Also dev_disp is like below:
sid        KZP
systemid   370 (Solaris on SPARCV9 CPU)
relno      6400
patchlevel 0
patchno    221
intno      20020600
make:      single threaded, Unicode, 64 bit
pid        22016
***LOG Q00=> DpSapEnvInit, DPStart (00 22016) [dpxxdisp.c   1104]
        shared lib "dw_xml.so" version 221 successfully loaded
        shared lib "dw_xtc.so" version 221 successfully loaded
        shared lib "dw_stl.so" version 221 successfully loaded
        shared lib "dw_gui.so" version 221 successfully loaded
        shared lib "dw_mdm.so" version 221 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >sapkzpn2_KZP_00                         <
DpShMCreate: sizeof(wp_adm)             10752   (1344)
DpShMCreate: sizeof(tm_adm)             3728952 (18552)
DpShMCreate: sizeof(wp_ca_adm)          31200   (104)
DpShMCreate: sizeof(appc_ca_adm)        10400   (104)
DpShMCreate: sizeof(comm_adm)           316000 (632)
DpShMCreate: sizeof(vmc_adm)            0       (560)
DpShMCreate: sizeof(wall_adm)           (40056/36728/88/192)
DpShMCreate: SHM_DP_ADM_KEY             (addr: 0xffffffff70c00000, size: 4181592)
DpShMCreate: allocated sys_adm at 0xffffffff70c00000
DpShMCreate: allocated wp_adm at 0xffffffff70c01c88
DpShMCreate: allocated tm_adm_list at 0xffffffff70c04688
DpShMCreate: allocated tm_adm at 0xffffffff70c046b0
DpShMCreate: allocated wp_ca_adm at 0xffffffff70f92ce8
DpShMCreate: allocated appc_ca_adm at 0xffffffff70f9a6c8
DpShMCreate: allocated comm_adm_list at 0xffffffff70f9cf68
DpShMCreate: allocated comm_adm at 0xffffffff70f9cf80
DpShMCreate: allocated vmc_adm_list at 0xffffffff70fea1e0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff70fea208
DpShMCreate: allocated wall_adm at 0xffffffff70fea210
MBUF state OFF
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
Fri Jan 29 15:11:07 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c   1490]
***LOG Q0K=> DpMsAttach, mscon ( sapkzpn2) [dpxxdisp.c   10127]
DpStartStopMsg: send start message (myname is >sapkzpn2_KZP_00                         <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Jan 29 15:11:08 2010
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
Fri Jan 29 15:11:29 2010
ERROR => W0 (pid 22021) died [dpxxdisp.c   12698]
ERROR => W2 (pid 22023) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W3 (pid 22024) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W4 (pid 22025) died [dpxxdisp.c   12698]
ERROR => W5 (pid 22028) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W6 (pid 22030) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W7 (pid 22038) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0xa1 --> 0x81
Fri Jan 29 15:12:08 2010
ERROR => W1 (pid 22022) died [dpxxdisp.c   12698]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-22021 (SIGUSR2)
ERROR => DpWpKill(22021, SIGUSR2) failed [dpxxtool.c   2508]
killing W1-22022 (SIGUSR2)
ERROR => DpWpKill(22022, SIGUSR2) failed [dpxxtool.c   2508]
killing W2-22023 (SIGUSR2)
ERROR => DpWpKill(22023, SIGUSR2) failed [dpxxtool.c   2508]
killing W3-22024 (SIGUSR2)
killing W7-22038 (SIGUSR2)
ERROR => DpWpKill(22038, SIGUSR2) failed [dpxxtool.c   2508]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:18 2010
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long)                        Fri Jan 29 09:12:18 2010
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
0 DIA    22021 Ended         no      1   0            78             SAPSYS
1 DIA    22022 Ended         no      1   0            78             SAPSYS
2 UPD    22023 Ended         no      1   0            78             SAPSYS
3 ENQ    22024 Ended         no      1   0            78             SAPSYS
4 BTC    22025 Ended         no      1   0            78             SAPSYS
5 BTC    22028 Ended         no      1   0            78             SAPSYS
6 SPO    22030 Ended         no      1   0            71             SAPSYS
7 UP2    22038 Ended         no      1   0            71             SAPSYS
Dispatcher Queue Statistics                     Fri Jan 29 09:12:18 2010
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id               13
wake_evt_udp_now        0
wake events             total     9, udp     6 ( 66%), shm     3 ( 33%)
since last update       total     9, udp     6 ( 66%), shm     3 ( 33%)
Dump of tm_adm structure:                       Fri Jan 29 09:12:18 2010
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks                   Fri Jan 29 09:12:18 2010
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:23 2010
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >sapkzpn2_KZP_00                         < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing proc (22019) (SOFT_KILL)
Stop icman
killing proc (22020) (SOFT_KILL)
Terminate gui connections
kill(22019,0) successful -> process alive
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:24 2010
NiISelect: TIMEOUT occured (1000 ms)
kill(22019,0) -> ESRCH: process died
kill(22020,0) -> ESRCH: process died
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >sapkzpn2_KZP_00                         <)
NiIMyHostName: hostname = 'sapkzpn2'
AdGetSelfIdentRecord: >                                                                           <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name          -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 1, 3 )
ShmKeySharedMMU( 1 ) = 0 (octal)
ShmCreate( 1, 0, 2, -> 0x0xffffffff7b100000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 2, 3 )
ShmKeySharedMMU( 2 ) = 0 (octal)
ShmCreate( 2, 0, 2, -> 0x0xffffffff70c00000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 3, 3 )
ShmKeySharedMMU( 3 ) = 0 (octal)
ShmCreate( 3, 0, 2, -> 0x0xffffffff6fc00000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmProtect( 4, 3 )
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmCreate( 4, 0, 2, -> 0x0xffffffff71f00000 )
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 14, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmProtect( 14, 3 )
ShmProtect: Key=14 not attached
ShmProtect( 14, 3 )
ShmCreate( 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 11, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 11, 0, 2, -> 0x0xffffffff76040000 )
ShmProtect( 11, 3 )
ShmProtect: Key=11 not attached
ShmProtect( 11, 3 )
ShmCreate( 11, 0, 2, -> 0x0xffffffff76040000 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmProtect( 19, 3 )
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmCreate( 19, 0, 2, -> 0x0xffffffff66000000 )
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmProtect( 33, 3 )
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmCreate( 33, 0, 2, -> 0x0xffffffff70400000 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmProtect( 41, 3 )
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmCreate( 41, 0, 2, -> 0x0xffffffff66800000 )
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 42, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmKeySharedMMU( 40 ) = 0 (octal)
ShmProtect( 40, 3 )
ShmCreate( 40, 0, 2, -> 0x0xffffffff60000000 )
ShmGet( 40, 42, 0, 2, -> 0x0xffffffff62972000 )
ShmProtect( 42, 3 )
ShmProtect: Key=42 not attached
ShmProtect( 42, 3 )
ShmCreate( 42, 0, 2, -> 0x0xffffffff62972000 )
ShmDelete( 40 )
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 43, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 45, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 44, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmKeySharedMMU( 31 ) = 0 (octal)
ShmCreate( 31, 0, 2, -> 0x0xffffffff6f400000 )
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 1 (type=2)
NiICloseHandle: shutdown and close hdl 1 / socket 8
DpDelSocketInfo: del info for socket 2 (type=1)
NiBufClose: clear extensions for hdl 2
NiBufSetStat: bufstat of hdl 2 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 2 / socket 9
***LOG Q05=> DpHalt, DPStop ( 22016) [dpxxdisp.c   9033]
shutdown completed - server stopped ***
Good Bye .....
Could you please help me about this issue?
Best regards

Installation problem for Java EE 5 SDK Update 2

Hi ,
I have jdk1.5.0_12 (J2SE) installed on my Windows XP. Now i am trying to install J2EE on my machine.I tried to install it twice but it comes to a halt after completing 45% at the same jar file. Following is the link which shows it comes to a halt.
http://img141.imageshack.us/my.php?image=j2eeinstallhangupav8.png
Also I wanted to know if I uninstall the J2SE and then install only J2EE will that be fine.Because I believe J2EE is a superset of J2SE ?
Thanks in advance.

For the difference between Java EE and Java SE read here:
http://java.sun.com/javaee/5/docs/firstcup/doc/p3.html
For the installation problem, I don�t know how to help you... maybe here you can find some ideas:
http://forum.java.sun.com/thread.jspa?threadID=738559
Andrea

Quicktime Installation Failed: error -3

I have been trying to install iTunes & Quicktime on my new Dell Windows computer without success. I get the above error and Quicktime will not install. iTunes will not function without Quicktime. I have spent hours on the phone with Apple support and Dell support who could not assist me. I have tried all the remedies suggested in this forum and the discussions obtained by Googling "quicktime installation failure." I have uninstalled and reinstalled the standalone versions, tried cleaning the registry of quicktime references and tried Microsoft installer cleaner without success. I would appreciate any assistance offered. This appears to be a somewhat common problem that Apple claims to be totally unaware of. Thank you.

I have uninstalled and reinstalled the standalone versions
what error messages do you get when you try to uninstall QuickTime? include error message numbers if you're getting any.

++ Debugging ACR Installation Problems ++

If Photoshop CS2/Bridge is not working correctly after you attempt to install ACR (Adobe Camera Raw) 3.1 or higher, here a some hints on how to debug common installation problems.
1. Make sure that "Camera Raw" appears exactly once in Photoshop's "About Plug-in" menu. If it appears zero times, you did not install the plug-in in a correct location. The correct location is shown below. If it appears more than one time, you have multiple copies of the plug-in installed.
The new location for Adobe Camera Raw 3.x and 4.x is:
>Mac: /Library/Application Support/Adobe/Plug-ins/CS2/File Formats/
b Note: that the Library folder refered to above is that found at root level and NOT the User/Library folder.
>Win: \Program Files\Common Files\Adobe\Plug-ins\CS2\File Formats\
2. If "Camera Raw" appears exactly once in the "About Plug-in" menu, then pick that item and make sure the Camera Raw about box shows version 3.1 or higher. If not, you have the wrong version of Camera Raw installed.
3. Run Bridge and pick "Camera Raw Preferences..." from the Bridge(Mac) or Edit(Win) menu. If the command is grayed out, then you don't have Camera Raw installed in the correct place. If the Camera Raw preferences dialog does not have "Version 3.1 or higher" in the title bar, you have the wrong version of Camera Raw installed.
If after you verify that that 1, 2 and 3 are correct, and you are still having problems (e.g. generic raw image icons in lieu of thumbnail previews), then next step is to purge the Adobe Bridge cache for any folders you are having problems with. The command to use is:
"Tools->Cache->Purge Cache for this Folder".

Understood guys. But let me make a few points.
1. Clearly I'm not the only one who had this problem. In fact, I wasn't the first person in this THREAD to have the problem.
2. I'm fairly computer savvy, and have worked with Photoshop for several years.
3. Yes, it does say c: in point 3, but I find it odd that in point 4 it does say Program Files/.... A very strange way to write it. Also, the c: drive is the default installation drive, so it's not idiocy for someone to assume that the file would be located on the same drive as you selected for installation.
4. This is not about technically right or wrong. I never said that the instructions were wrong. I merely was trying to make a suggestion that would help people avoid the same trap I fell into. Was it my mistake? Yes. Would my clarifying suggestion perhaps help others avoid making the mistake I did. I would hope so. Also, as someone else suggested in this thread, Adobe SHOULD have written an installation program for the ACR 3.1 upgrade that did the placing automatically. After all, EVERYONE knew that ACR3.1 would be released shortly after the release for CS2...in fact Mr. Knoll himself was quoted in other forums about when D2X compatibility would actually happen.
5. The purpose of these forums is to be helpful to other users--not to be patronizing or rude. I'm a big Photoshop fan, and a loyal customer. I'm also in the service industry, and I would bet that customer service experts would raise an eyebrow or two about the tone contained in certain messages in this thread, including from an Adobe employee.
Just my two cents. Flame away if you must. But you might want to take a look at what I actually suggested in my last message before lighting up the torch.

Quicktime installation failed

everytime i try to install itunes it says
Quicktime installation failed.
error code: -3
it use to work fine, now my itunes wont even open.
can anyone help, its driving me insane!!

hi, i was just looking around and it seams that this other person had a problem just like ours here's the page site hope it helps out!
http://discussions.apple.com/thread.jspa?threadID=415642&tstart=30

XP Quicktime Installer problem - wants 141MB??

Similar Messages

Maybe you are looking for