XP SP2 or XP SP3

I'm looking to buy a Nano 5th (current) generation, and saw on the Apple website that SP3 is required. I'm sure it used to read SP2..if I'm correct, maybe they changed it when MS announced no further support to SP2?
Anyway, my question is...will this 5th gen Nano work with XP Pro SP2 and the latest iTunes 9.2.1 version?
I ask because I don't want to 'upgrade' to SP3.
It's for my wife's PC laptop, not my 's

Go with SP3. Microsoft no longer supports SP2: http://support.microsoft.com/gp/windowsxpsp2
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

Similar Messages

BO XI 3.1 SP2 upgrade to SP3 Problem

Hi All,
I'm trying to upgrade our current BO XI 3.1 SP2 installation towards SP3.
The server it is running on has the following OS: Windows 2003 SP2 (32bit)
When performing the update, all goes well untill the point in the installation where it says "updating component registration"
immediatly when the installer enters this phase, I receive the following error:
Error 2908: Could not register component {73DDBFD1-3CEC-4DE2-AD1F-5D9354AE44D6}
Cancel - retry - ignore
When chosing ignore I receive a new error:
Error 1935: An error occured during the installation of assembly component {73DDBFD1-3CEC-4DE2-AD1F-5D9354AE44D6}
OK
When clicking OK, the installer rolls back and the update isn't performed.
note that when the installation is performed with the BO Admin user, I receive both error messages, when running the update with any other local admin user, only the second error (assembly component..) comes up.
Would anyone have an idea on how to solve this ?
Best Regards,
Tim Van Caeyzeele

Thanks for the info Jonathan, good to know where the log files are
I restarted the installation (with the same end result) and noticed that the log file is created once I click cancel to abort the installation.
The log file is 65MB big
After a huge search in the log file I found the latest entries before the rollback, actually the point where it fails:
MSI (s) (C0:30) [11:23:24:044]: Executing op: ComponentRegister(ComponentId={73DDBFD1-3CEC-4DE2-AD1F-5D9354AE44D6},KeyPath=<\CrystalDecisions.Enterprise.Shared,FileVersion="12.3.0.601",version="12.0.1100.0",culture="neutral",publicKeyToken="692FBEA5521E1304",State=3,,Disk=1,SharedDllRefCount=0,BinaryType=0)
1: {EEC13875-F4CB-416F-ADC0-1EDA01A85632} 2: {73DDBFD1-3CEC-4DE2-AD1F-5D9354AE44D6} 3: <\CrystalDecisions.Enterprise.Shared,FileVersion="12.3.0.601",version="12.0.1100.0",culture="neutral",publicKeyToken="692FBEA5521E1304"
MSI (s) (C0:30) [11:23:24:044]: MSCOREE not loaded loading copy from system32
MSI (s) (C0:30) [11:23:24:262]: Note: 1: 1935 2: 3: 0x80131700 4: 5: CreateAssemblyNameObject 6: CrystalDecisions.Enterprise.Shared,FileVersion="12.3.0.601",version="12.0.1100.0",culture="neutral",publicKeyToken="692FBEA5521E1304"
MSI (s) (C0:30) [11:23:24:278]: Transforming table Error.
MSI (c) (DC:84) [11:23:24:278]: Transforming table Error.
Info 2867. The error dialog property is not set
MSI (c) (DC:84) [11:23:24:278]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
Error 2908. Could not register component {73DDBFD1-3CEC-4DE2-AD1F-5D9354AE44D6}.
MSI (s) (C0:30) [11:37:59:019]: Transforming table Error.
MSI (s) (C0:30) [11:37:59:019]: Product: SAP BusinessObjects Enterprise XI 3.1 SP3 Update -- Error 2908. Could not register component {73DDBFD1-3CEC-4DE2-AD1F-5D9354AE44D6}.
MSI (s) (C0:30) [11:37:59:019]: Note: 1: 1935 2: 3: 0x80131700 4: 5: CreateAssemblyNameObject 6: CrystalDecisions.Enterprise.Shared,FileVersion="12.3.0.601",version="12.0.1100.0",culture="neutral",publicKeyToken="692FBEA5521E1304"
MSI (s) (C0:30) [11:37:59:035]: Transforming table Error.
MSI (c) (DC:84) [11:37:59:035]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
Error 2908. Could not register component {73DDBFD1-3CEC-4DE2-AD1F-5D9354AE44D6}.
MSI (s) (C0:30) [11:37:59:597]: Transforming table Error.
MSI (s) (C0:30) [11:37:59:597]: Product: SAP BusinessObjects Enterprise XI 3.1 SP3 Update -- Error 2908. Could not register component {73DDBFD1-3CEC-4DE2-AD1F-5D9354AE44D6}.
MSI (s) (C0:30) [11:37:59:597]: Note: 1: 1935 2: 3: 0x80131700 4: 5: CreateAssemblyNameObject 6: CrystalDecisions.Enterprise.Shared,FileVersion="12.3.0.601",version="12.0.1100.0",culture="neutral",publicKeyToken="692FBEA5521E1304"
MSI (s) (C0:30) [11:37:59:597]: Transforming table Error.
MSI (c) (DC:84) [11:37:59:597]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
Error 2908. Could not register component {73DDBFD1-3CEC-4DE2-AD1F-5D9354AE44D6}.
MSI (s) (C0:30) [11:38:00:175]: Transforming table Error.
MSI (s) (C0:30) [11:38:00:175]: Product: SAP BusinessObjects Enterprise XI 3.1 SP3 Update -- Error 2908. Could not register component {73DDBFD1-3CEC-4DE2-AD1F-5D9354AE44D6}.
MSI (s) (C0:30) [11:38:00:175]: Transforming table Error.
MSI (c) (DC:84) [11:38:00:175]: Font created. Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
Are you sure you want to cancel?
I notice that the keypath doesn't point to a location on the server, contrary to all other omponents that hold a keypath like:
MSI (s) (C0:30) [11:23:24:044]: Executing op: ComponentRegister(ComponentId={FD575BFC-FBD5-46A6-A54F-413053DBB91D},KeyPath=G:\BOXI31\common\4.0\managed\,State=3,,Disk=1,SharedDllRefCount=0,BinaryType=0)
1: {EEC13875-F4CB-416F-ADC0-1EDA01A85632} 2: {FD575BFC-FBD5-46A6-A54F-413053DBB91D} 3: G:\BOXI31\common\4.0\managed\
Edited by: Tim Van Caeyzeele on Jul 16, 2010 11:57 AM

[SOLVED] Upgrade from SLES10 SP3 & OES2 SP2 to SP4/SP3 breaks NCS

Hi folks,
(This post was originally meant to be a rant and a request for help, but
while writing the final paragraph i found the solution. It's still a
rant, but i figured i'd post my solution here in case someone else runs
into the same issue.)
I've just spent several hours banging my head against a broken cluster
node. My system is a 32-bit SLES 10 VM running on VMware ESX 3.5.x.
I upgraded from SLES10 SP3 and OES2 SP2 to the next service packs for
each (using the move-to-oes-sp3 script in yast2 online_update).
Everything went well for the first few update/reboot sequences, then
after the final reboot on SLES10 SP4 & OES2 SP3, cluster services would
not load or join the cluster on restart.
I checked dmesg and found errors about "Loading module compiled for
kernel version 2.6.16.60-0.54.5-vmi" into a previous kernel version, so
i tried downgrading to that kernel version, only to find that it was
older than the one i had just upgraded from (it's the original SLES10
SP3 kernel). So i tried upgrading back to the same kernel which is
running on the other cluster node (2.6.16.60-0.77.1-vmi), but that did
not work any better.
<preaching>
I have to say that i'm not impressed that OES2 SP3 isn't even compiled
against the appropriate kernel, and because of SUSE's kernel RPM
overwrite policy there's no way i can select to boot from a previous
kernel to see if that fixes things. Note to SUSE and other distro
builders: if you're not doing kernel package upgrades like Red Hat or
Ubuntu (so that we can select to boot from the previous kernel from the
boot menu), you're doing it *WRONG*.
</preaching>
I then upgraded again to the latest recommended kernel for SLES10 SP4,
and still no joy. Dmesg shows this error before the rot starts:
allocation failed: out of vmalloc space - use vmalloc=<size> to increase
size.
When searching for this error i stumbled across
http://ubuntuforums.org/showthread.php?t=1613132
which pointed me to
http://www.mythtv.org/wiki/Common_Pr...lloc_too_small
Adding vmalloc=192M to /boot/grub/menu.lst and rebooting solved the
problem for me.
Regards,
Paul

Originally Posted by Paul Gear
On 13/10/11 07:36, magic31 wrote:
> ...
> Not sure if it's related to the issue you've hit, but along the lines
> of what Kevin already mentioned, there are issues that can arries when
> using the VMI kernel (that I've seen) if having multiple flavors of the
> kernel installed along with it (as in having both kernel-vmi as also
> kernel-smp packages installed) ...
> Curious, is that also the case with your setup?
The system in question has kernel-bigsmp and kernel-vmi installed. We
only ever boot from kernel-vmi.
> I've moved to only using the smp kernel on VMware (along with the
> clock=pit boot option to avoid time drift issues, or pmtr I think in
> your case when also running NCS services in the vm).
When we installed the system (on OES2 SP1, i believe) it was a while
ago, and kernel-vmi with clocksource=acpi_pm on the kernel command line
was the only solution we could find to get reliable time. If there are
updated best-practice documents, i'd be happy to hear about them.
However, this is a production cluster and my boss is (rightly) rather
reticent to make major changes.
Paul
the official Vmware paper on time is that IF you're using SLES 10.x 32-bit you will use VMI and NO kernel params (ie, get rid of the clockpit and clocksource=blah).
But if 64-bit then you're okay.
The easiest, IMO (especially with vmware) is to use the miggui (migration utility). That's how I'm converting all my 32-bit servers in vmware to 64-bit. Works quite well.
--Kevin

Migedir Error going from NW6.5SP8 to OES2 SP2 on SLES10 SP3

I've searched the forums and was not able to find this particular problem so hopefully someone more knowledgeable than I can help. I have an issue with the Transfer ID utility erroring out at the DIB copy portion of a NetWare 6.5 SP8 migration to 64-bit OES2 SP2. The eDirectory Precheck and Preparation portion of the Transfer ID complete successfully with green check marks. When the Transfer ID gets to the DIB copy part I get a series of error messages.
This is the error from the mignds.log file:
05-05-2011:09:56:20:Information: The DS version on the source server is 10554.
05-05-2011:09:56:20:Fatal: Setting up the NetWare eDirectory migration environment...
05-05-2011:09:56:20:Information: Package 'ncpfs' has been installed.
05-05-2011:09:56:20:Information: Mounting the SYS volume of 'xxx.xxx.xxx.xxx' at /var/opt/novell/.edir_migrate/mnt...
05-05-2011:09:56:20:Information: SYS mounted successfully.
05-05-2011:09:56:20:Information: 'novell-ncpserv' package is available.
05-05-2011:09:56:20:Information: Copied scp peer file (ncpmig.nlm) to source server successfully.
05-05-2011:09:56:20:Fatal: SERVER: load nlm ncpmig.nlm failed rc=158.
In the Transfer ID Migration Log this is what appears:
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:*****************Command output start**********************************
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:eDirectory migration utility for Linux
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:Version: 2.0 for OES Linux 2.0
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:Copyright (c) 2007, Novell Inc. All rights reserved.
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:Creating the eDirectory migration file locations...
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:Get the source server administrator credentials -
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir: Enter adminDN(e.g: cn=admin.o=administrators): Enter password:
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:Source server, xxx.xxx.xxx.xxx is reachable.
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:The source server, xxx.xxx.xxx.xxx is running on NetWare platform.
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:OS Version: v5.70.8
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:Product Version: v6.50.8
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:NCP Engine Version: 1
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:NCP Engine Platform: 0:
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:The NetWare source server is running on OES Platform
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:eDirectory packages are installed.
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:Performing pre-migration checks on the source server, 'xxx.xxx.xxx.xxx'...
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:ndscheck performed successfully.
2011-05-05 09:56:20,761 INFO - ServerIDSwap:migedir:Checking time synchronization between source and target servers.
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:Source and Target servers are in time synchronization
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:Performing eDirectory migration...
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:This may take time depending on the size of the data on the server that is being migrated.
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:The DS version on the source server is 10554.
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:Setting up the NetWare eDirectory migration environment...
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:Package 'ncpfs' has been installed.
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:Mounting the SYS volume of 'xxx.xxx.xxx.xxx' at /var/opt/novell/.edir_migrate/mnt...
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:SYS mounted successfully.
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:'novell-ncpserv' package is available.
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:Copied scp peer file (ncpmig.nlm) to source server successfully.
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:ERROR: Could not load secure NCP NLM, ncpmig.nlm on the source server - SERVER: load nlm ncpmig.nlm failed rc=158..
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:SERVER: load nlm ncpmig.nlm failed rc=158.
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:stty: standard input: Invalid argument
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:stty: standard input: Invalid argument
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:stty: standard input: Invalid argument
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:
2011-05-05 09:56:20,762 INFO - ServerIDSwap:migedir:*****************Command output end**********************************
It looks like the Mig utility can't run ncpmig.nlm on the source server for whatever reason. The previous steps completed successfully so I don't think it's an issue of login rights. The OES2 SP2 server is fully patched with all critical and optional patches. I'd like to add that I've done a couple migrations in my test lab prior to this and they both went through smoothly. I'm also following the exact same steps I used when I performed the lab migrations.
I've also tried the same migration using OES2 SP1 (fully patched and not), OES2 SP2 (non-patched) and OES2 SP3 (patched and not) with the exact same error message. This leads me to believe it's something in the source server causing the issue but I can't, for the life of me, figure out what.
Source server is running NW6.5 SP8 and eDir 8.7.3.10. Target server is OES2 SP2 and eDir 8.8.5 HP6. Does anyone have insight into why the Transfer ID is failing at the DIB copy? Thanks in advance.

Sorry for the late reply. Been extremely busy with our migrations and other issues. To answer the last question, our default administrator login to the tree is not called admin. We prefer not to use default names as they decrease security. I used my own login credentials, which also has full rights to the tree, to proceed with the migration. Determined, as a precaution, that the person performing the migration should add him or herself as a trustee to the source/destination servers AND the container the server objects live in. It's probably a redundant step but should decrease the likelihood of encountering the original issue.

OES11 SP2 -- Use SLES SP3?

The question is simple.
Part1
Should I also be upgrading to SLES SP3 when I do the upgrade to OES 11 SP2?
Due to version confusion -- the answers given in this forum are not always Crystal Clear.
Part 2:
Is this spelled out somewhere in the (thousands of pages) of the documentation that I missed somewhere? (Perhaps I am having a "senior moment" and just can't see the words in one of the manuals.
Thanks for any help.
Cheers!

On 09/01/2014 11:16 AM, davewr50 wrote:
>
> The question is simple.
>
> _PART1_[/B]
> SHOULD I ALSO BE UPGRADING TO SLES SP3 WHEN I DO THE UPGRADE TO OES 11
> SP2?
>
> DUE TO VERSION CONFUSION -- THE ANSWERS GIVEN IN THIS FORUM ARE NOT
> ALWAYS CRYSTAL CLEAR.
Yes; OES versions are, by default (with very, very few exceptions) linked
directly to SLES versions, with OES versions being one SP behind SLES SPs.
Thus, OES 11 SP2 is linked to SLES 11 SP3.
> [B]_PART_2:_
> Is this spelled out somewhere in the (thousands of pages) of the
> documentation that I missed somewhere? (Perhaps I am having a "senior
> moment" and just can't see the words in one of the manuals.
https://www.novell.com/documentation...a/btmu44d.html
Top of the page under Meeting All Server Software and Hardware Requirements:
Code:
Server Software
As part of the OES 11 SP2 installation, you install SUSE Linux Enterprise
Server 11 SP3.
IMPORTANT:OES 11 SP2 services were developed and tested on a default and
fully-patched SLES 11 SP3 server base.
As you install OES 11 SP2, do not change any of the SLES 11 SP3 Base
Technologies package selections, such as Java support. Doing so can cause
various problems, such as the installation failing or one or more OES 11
SP2 services not working properly.
If you are installing on an existing SLES 11 SP3 server, be sure to verify
that all of the default SLES 11 SP3 components are installed before
attempting to install OES 11 SP2 services.
I would not define missing this as a senior moment; powerful products come
with lots of docs, and knowing exactly where to find one specific piece of
information is not always clear.
Good luck.
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

Zenworks 11.2.4 SP2 update to SP3 failed

Hi all
Maybe easy solution, but have problems updating my zen11sp2 servers to 11sp3(a)
Current situation:
Server1: primary 11.2 2008x64
Server2: primary 11.2 2008x64
Server3: satellite 11.2 2008x64
Server4: sql 2008 (hosting zenworks db)
Done:
Created a zenaudit database on sql server
Stopped services zenworks on server2
Run setup as administrator on server1
Said it is the first server to be updated to sp3
Given the information for the sql auditing database
Setup starts, and first updates the zenworks database on sql
Then setup starts updating primary server
Setup ends with message : updated finished with errors
Restarted server1
Login on control center
Server still 11.2.4
When I try to open users, error message (as sql database already updated)
Restored the sql databse
All works but still SP2
In System-update-import.log
[SystemUpdateDownloader] [45] [admin] [SystemUpdate] [] [Error downloading update] [com.novell.zenworks.datamodel.exceptions.ObjectNot FoundException: 41d54567415d3ad45a0c19fa70b0ff6d
at com.novell.zenworks.datamodel.utils.AdminImplUtil. get(AdminImplUtil.java:99)
at com.novell.zenworks.datamodel.services.content.Con tentAdminImpl.getContent(ContentAdminImpl.java:226 6)
at com.novell.zenworks.datamodel.services.content.Con tentAdminImpl.get(ContentAdminImpl.java:2240)
at com.novell.zenworks.systemupdate.SystemUpdateDownl oader.checkImportedContents(SystemUpdateDownloader .java:466)
at com.novell.zenworks.systemupdate.SystemUpdateDownl oader.downloadUpdate(SystemUpdateDownloader.java:2 37)
at com.novell.zenworks.systemupdate.SystemUpdateDownl oader.downloadUpdate(SystemUpdateDownloader.java:7 8)
at com.novell.zenworks.systemupdate.SUImportUpdator.i mportSystemUpdate(SUImportUpdator.java:118)
at com.novell.zenworks.systemupdate.SUImportUpdator.i mportSystemUpdate(SUImportUpdator.java:67)
at com.novell.zenworks.configure.actions.ImportSUConf igureAction.configure(ImportSUConfigureAction.java :69)
at com.novell.zenworks.configure.ZENworksConfigure.ex ecConfigAction(ZENworksConfigure.java:1758)
at com.novell.zenworks.install.customcode.configure.B aseZenConfigAction.install(BaseZenConfigAction.jav a:63)
at com.novell.zenworks.install.customcode.configure.C onfigImportSUAction.install(ConfigImportSUAction.j ava:30)
at com.zerog.ia.installer.actions.CustomAction.instal lSelf(DashoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.GhostDirectory.install(Dash oA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.Installer.install(DashoA10* ..)
at com.zerog.ia.installer.actions.InstallProgressActi on.n(DashoA10*..)
at com.zerog.ia.installer.actions.ProgressPanelAction $1.run(DashoA10*..)
] [] [] [SystemUpdate]
[ERROR] [01/26/2015 08:22:21.530] [2640] [SUImportUpdator] [45] [admin] [SystemUpdate] [] [Error importing system update contents] [com.novell.zenworks.systemupdate.exceptions.System UpdateException: Error importing system update contents
at com.novell.zenworks.systemupdate.SUImportUpdator.i mportSystemUpdate(SUImportUpdator.java:137)
at com.novell.zenworks.systemupdate.SUImportUpdator.i mportSystemUpdate(SUImportUpdator.java:67)
at com.novell.zenworks.configure.actions.ImportSUConf igureAction.configure(ImportSUConfigureAction.java :69)
at com.novell.zenworks.configure.ZENworksConfigure.ex ecConfigAction(ZENworksConfigure.java:1758)
at com.novell.zenworks.install.customcode.configure.B aseZenConfigAction.install(BaseZenConfigAction.jav a:63)
at com.novell.zenworks.install.customcode.configure.C onfigImportSUAction.install(ConfigImportSUAction.j ava:30)
at com.zerog.ia.installer.actions.CustomAction.instal lSelf(DashoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.GhostDirectory.install(Dash oA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.Installer.install(DashoA10* ..)
at com.zerog.ia.installer.actions.InstallProgressActi on.n(DashoA10*..)
at com.zerog.ia.installer.actions.ProgressPanelAction $1.run(DashoA10*..)
] [] [] [SystemUpdate]
[DEBUG] [01/26/2015 08:22:21.702] [2640] [SUImportUpdator] [45] [admin] [SystemUpdate] [] [Attempting to set update status to ERROR with message: SystemUpdate.error.importingcommands] [] [] [] [SystemUpdate]
[DEBUG] [01/26/2015 08:22:21.889] [2640] [SUImportUpdator] [45] [admin] [SystemUpdate] [] [Updated update (5011030000fc50000000002014021123) status to ERROR] [] [] [] [SystemUpdate]
All I can find on google is to restore database (as I did) and restart update. But will that the solution ? As it takes about 1 hour to run setup, wait, restart, resore :-(

Originally Posted by erwinvdpoel
Hi all
Maybe easy solution, but have problems updating my zen11sp2 servers to 11sp3(a)
Current situation:
Server1: primary 11.2 2008x64
Server2: primary 11.2 2008x64
Server3: satellite 11.2 2008x64
Server4: sql 2008 (hosting zenworks db)
Done:
Created a zenaudit database on sql server
Stopped services zenworks on server2
Run setup as administrator on server1
Said it is the first server to be updated to sp3
Given the information for the sql auditing database
Setup starts, and first updates the zenworks database on sql
Then setup starts updating primary server
Setup ends with message : updated finished with errors
Restarted server1
Login on control center
Server still 11.2.4
When I try to open users, error message (as sql database already updated)
Restored the sql databse
All works but still SP2
In System-update-import.log
[SystemUpdateDownloader] [45] [admin] [SystemUpdate] [] [Error downloading update] [com.novell.zenworks.datamodel.exceptions.ObjectNot FoundException: 41d54567415d3ad45a0c19fa70b0ff6d
at com.novell.zenworks.datamodel.utils.AdminImplUtil. get(AdminImplUtil.java:99)
at com.novell.zenworks.datamodel.services.content.Con tentAdminImpl.getContent(ContentAdminImpl.java:226 6)
at com.novell.zenworks.datamodel.services.content.Con tentAdminImpl.get(ContentAdminImpl.java:2240)
at com.novell.zenworks.systemupdate.SystemUpdateDownl oader.checkImportedContents(SystemUpdateDownloader .java:466)
at com.novell.zenworks.systemupdate.SystemUpdateDownl oader.downloadUpdate(SystemUpdateDownloader.java:2 37)
at com.novell.zenworks.systemupdate.SystemUpdateDownl oader.downloadUpdate(SystemUpdateDownloader.java:7 8)
at com.novell.zenworks.systemupdate.SUImportUpdator.i mportSystemUpdate(SUImportUpdator.java:118)
at com.novell.zenworks.systemupdate.SUImportUpdator.i mportSystemUpdate(SUImportUpdator.java:67)
at com.novell.zenworks.configure.actions.ImportSUConf igureAction.configure(ImportSUConfigureAction.java :69)
at com.novell.zenworks.configure.ZENworksConfigure.ex ecConfigAction(ZENworksConfigure.java:1758)
at com.novell.zenworks.install.customcode.configure.B aseZenConfigAction.install(BaseZenConfigAction.jav a:63)
at com.novell.zenworks.install.customcode.configure.C onfigImportSUAction.install(ConfigImportSUAction.j ava:30)
at com.zerog.ia.installer.actions.CustomAction.instal lSelf(DashoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.GhostDirectory.install(Dash oA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.Installer.install(DashoA10* ..)
at com.zerog.ia.installer.actions.InstallProgressActi on.n(DashoA10*..)
at com.zerog.ia.installer.actions.ProgressPanelAction $1.run(DashoA10*..)
] [] [] [SystemUpdate]
[ERROR] [01/26/2015 08:22:21.530] [2640] [SUImportUpdator] [45] [admin] [SystemUpdate] [] [Error importing system update contents] [com.novell.zenworks.systemupdate.exceptions.System UpdateException: Error importing system update contents
at com.novell.zenworks.systemupdate.SUImportUpdator.i mportSystemUpdate(SUImportUpdator.java:137)
at com.novell.zenworks.systemupdate.SUImportUpdator.i mportSystemUpdate(SUImportUpdator.java:67)
at com.novell.zenworks.configure.actions.ImportSUConf igureAction.configure(ImportSUConfigureAction.java :69)
at com.novell.zenworks.configure.ZENworksConfigure.ex ecConfigAction(ZENworksConfigure.java:1758)
at com.novell.zenworks.install.customcode.configure.B aseZenConfigAction.install(BaseZenConfigAction.jav a:63)
at com.novell.zenworks.install.customcode.configure.C onfigImportSUAction.install(ConfigImportSUAction.j ava:30)
at com.zerog.ia.installer.actions.CustomAction.instal lSelf(DashoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.GhostDirectory.install(Dash oA10*..)
at com.zerog.ia.installer.InstallablePiece.install(Da shoA10*..)
at com.zerog.ia.installer.Installer.install(DashoA10* ..)
at com.zerog.ia.installer.actions.InstallProgressActi on.n(DashoA10*..)
at com.zerog.ia.installer.actions.ProgressPanelAction $1.run(DashoA10*..)
] [] [] [SystemUpdate]
[DEBUG] [01/26/2015 08:22:21.702] [2640] [SUImportUpdator] [45] [admin] [SystemUpdate] [] [Attempting to set update status to ERROR with message: SystemUpdate.error.importingcommands] [] [] [] [SystemUpdate]
[DEBUG] [01/26/2015 08:22:21.889] [2640] [SUImportUpdator] [45] [admin] [SystemUpdate] [] [Updated update (5011030000fc50000000002014021123) status to ERROR] [] [] [] [SystemUpdate]
All I can find on google is to restore database (as I did) and restart update. But will that the solution ? As it takes about 1 hour to run setup, wait, restart, resore :-(
Have you extracted the ISO or do you have it "mounted"?
THomas

4.9 SP2 - Zfd3.2 SP3 client side files

Does anyone know if it's possible to build in the updated client-side
zfd3.2 sp3 files into this client (to save a reboot when the clients
detect newer server files?)
I've done this with older clients, not sure about this version.

Yes, should work the same way.
Client 4.91 will be the first that will completely leave out Zenworks
components.
Regards, Kai Reichert
Novell Support Forum Sysop
There is an old saying that if a million monkeys typed on a million
keyboards for a million years, eventually all the works of Shakespeare
would be produced. Now, thanks to the Internet, we know this is not
true.

Cant update to 11.4 because i have windows SP2 i need SP3 what can i do? help please!

i now cant sync my iphone and i need to, someone please tell me what i can do to be able to download it?

This?
http://www.microsoft.com/en-us/download/details.aspx?id=24

Win XP Pro SP3 to SP2??

Hi
New new T61 will arrive Tuesday. It will have XP Pro, I think SP3..
My kids have told me no body wants SP3 and/or IE 7,, in IBM/Northrop-Grumman/Accenture,, Stay with SP2 & IE 6..
Before I get into trouble, I need so help
1)What is the consensus:
selectively back-out SP3, down grading to SP2
fresh install of SP2
live with SP3,, with minor/major complaints.
2)Is there something in the T61, 6465-9UU(stock as built) that mandates SP3??
My config as purchased from IBM Factory Outlet:
T8300(2.4GHz)
3GB RAM
100GB 7200rpm HD
15.4in 1280x800 LCD
Intel X3100
CDRW/DVDRW
Intel 802.11agn wireless
Bluetooth
Modem
1Gb Ethernet
UltraNav
4-in-1 Multi-card Reader (SD/MMC/MS/XD)
Secure chip
Fingerprint reader
6c Li-Ion
WinXP Pro
And my last question?? Does the T61 overclock??
Thanks in Advance..
Jim
Message Edited by JJ_BPK on 10-03-2008 11:40 AM
*** 1976 My 1st LapTop: IBM 5100, cpu = PALM, 16KB NMOS RAM , wt 28lbs, Basic/APL *** 1967-1997 I worked in Boca,, nuff said?? *** TP(s) L-40, 500, 600E *** current home brew: Intel 840D @ 3,4GHZ, P5WD2, 2GB PC6400, XP Pro *** NEW ThinkPad T61, 6465-9UU, T8300, 3gb ram, XP Pro

Hello Jim,
be patient! See if system is working for you. Don´t run System Updater, without carefully reading installation
instructions. Some Bios updates, should be deployed with burned iso. on cd. Not via System Update.
Windows SP3 is safe and you should use Firefox with Noscript and Adblock plug-ins, when you want to surf safe.
Not IE6!
SP3 will be necessary and essential, when you want to get your system updated with security updates in long term.
Overlocking is not good at notebooks, cause of heat dissipation and there is no option in bios to allow that.
I hope I could help little.
Regards
Andreas
Message Edited by Agotthelf on 10-04-2008 12:18 AM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Remote Exchange Management Console "W3SVC isn't running on any Exhange servers in site" and always shows older version after SP2 or SP3 installed

I'm trying to use EMC on a computer to remotely manage Exchange 2010 without having to do from the actual Exchange servers.
First off, upgrading, uninstalling or installing EMC always fails on "Stopping" services. Seams to be a pretty common problem, but no clear fix other than deleting the registry entry (HKLM\SOFTWARE\Microsoft\ExchangeServer) and the
"C:\Program Files\Microsoft\Exchange Server" folder. I'm guessing this is a bug since there should not be any Exchange services that need to be stopped on a computer where I'm just trying to use the EMC tool to manage Exchange.
Next, is where when I open EMC I get "The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote PowerShell, this service must be running. Make sure that the W3SVC is running on
at least one Exchange server." From all the reading I am pretty sure that this is due to the Exchange servers being on one version and EMC I'm trying to use is another version.
This is the version our Exchange Servers are on:
ProductVersion   FileVersion      FileName
14.02.0375.000   14.02.0375.000   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
Which finally brings me to the part where no matter what SP I install to run EMC it always shows:
ProductVersion   FileVersion      FileName
14.01.0218.015   14.01.0218.015   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
I've tried SP2, and even SP3 hopeing that an even newer version would let me connect to Exchange, but no matter what it always shows the 14.01 version above.
I've also tried installing "Exchange2010-KB2874216-x64-en" which should be the same version we are on (Update Rollup 7 for Exchange Server 2010 Service Pack 2), but get a Windows Installer Error stating, "The upgrade patch cannot be installed
by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." This Error probably makes sense if no matter what I do I'm stuck with a version prior to SP2.
Any ideas?

Hi,
From your description, I would like to clarify the following things:
1. Make sure the World Wide Web Publishing Service is running in Exchange server.
2. Ensure that the account you use to open EMC is a member of Organization Management role group.
3. Based on my knowledge, the error "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." occurs if you install
the RU for a different SP. Please re-download the Service Pack 2 and install it on the remote computer since it hasn't been installed successfully from the above information.
What's more, here is a similar thread for your reference.
Unable to install Update Rollup 4 for Exchange Server 2010 Service Pack 2
https://social.technet.microsoft.com/Forums/exchange/en-US/677c21ed-e125-41c1-a468-c268e1f21f8e/unable-to-install-update-rollup-4-for-exchange-server-2010-service-pack-2?forum=exchange2010
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Migration from Sp2 to Sp3

I upgraded weblogic sp2 to Weblogic sp3 in Solaris environment.When i restart the server, all the components are getting deployed and the server listens to the correct port but immediately the shutdown begin and the server undeploys all the components and shuts down.What might be the cause of the problem ?
Thanks
Vishnu

Vishnu,
You need to check your logs for errors by setting logging to Info and debug to
stdout.
Most likely, the IP and/or port your are starting WLS with is already in use by
another process.
Do a netstat -na | grep <port # for WLS>
Regards
Mayur
Vishnu <[email protected]> wrote:
I upgraded weblogic sp2 to Weblogic sp3 in Solaris environment.When i
restart the server, all the components are getting deployed and the
server listens to the correct port but immediately the shutdown begin
and the server undeploys all the components and shuts down.What might
be the cause of the problem ?
Thanks
Vishnu

Exchange 2010 failing to upgrade to SP1, SP2, or SP3

My host server is running Windows Server 2008 R2 Standard. Currently Exchange 2010 is without any service pack. I initially tried to upgrade to SP1 but that failed with the message below. Thinking that I could perhaps skip to SP2 or even SP3 I attempt that
upgrade and received a similar message though not posted here. The Schema for our domain shows that it is at the Windows Server 2008 R2 level. I am attempting to apply the update using the Enterprise/Schema admin account for our network.
Here is the error message that I receive. This happens after all prereq checks are done and the installation has actually started.
Summary: 15 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:04
Organization Preparation
Failed
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "The operation couldn't be performed because object 'Default Policy' couldn't be found on 'marvin.intercity.org'.".
The operation couldn't be performed because object 'Default Policy' couldn't be found on 'marvin.intercity.org'.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "You cannot call a method on a null-valued expression.".
You cannot call a method on a null-valued expression.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "You cannot call a method on a null-valued expression.".
You cannot call a method on a null-valued expression.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Set the default Accepted domain from the default recipient policy";
$defaultEmailAddressPolicy = get-EmailAddressPolicy -Identity:"Default Policy";
$defaultSmtpTemplate = $defaultEmailAddressPolicy.EnabledPrimarySMTPAddressTemplate;
$index = $defaultSmtpTemplate.IndexOf("@");
$eapAuthoritativeDomain = $defaultSmtpTemplate.Substring($index+1);
$defaultDomain = get-accepteddomain | where {$_.DomainName -eq $eapAuthoritativeDomain };
$defaultDomain | set-accepteddomain -MakeDefault:$true;
Write-ExchangeSetupLog -Info "Default domain $defaultDomain";
" was run: "Cannot bind argument to parameter 'Identity' because it is null.".
Cannot bind argument to parameter 'Identity' because it is null.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=m...
Elapsed Time: 00:00:04
Preparing Setup
Cancelled
Stopping Services
Cancelled
Languages
Cancelled
Remove Exchange Files
Cancelled
Preparing Files
Cancelled
Copy Exchange Files
Cancelled
Language Files
Cancelled
Restoring services
Cancelled
Languages
Cancelled
Hub Transport Role
Cancelled
Client Access Role
Cancelled
Mailbox Role
Cancelled
Management Tools
Cancelled
Finalizing Setup
Cancelled

Agreed - check the default email address policy is not corrupt and same for remote domains - did you make ay modifications to them?
Since he is running this as das Uber-admin, it will prep Exchange schema and AD even if not explicitly done prior. Exchange setup is helpful like that, well some times....
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Upgrading XP-Pro SP2 to SP3. Consequences to....

Hi!
Upgrading XP-Pro SP2 to SP3. What are the consequences to:
1] Recovery Console, especially if installed on your drive? Should it be reinstaled? But it will need a CD with SP3 version of XP.
2] Previously created recovery disk. Should it be recreated? If you do, is it actually taking account of SP3?
3] Can the SP3 upgrade be slipstreamed as SP1 and SP2, creating a SP3 version of XP?
There are more questions, but this are the most important.
Thanks for your interest.
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock

ANSWERS TO MY QUESTIONS WITH XP-SP3 RELEASED AND INSTALLED, FOR THE BENEFIT OF MEMBERS.
1] The Recovery console should be reinstalled after the SP3 upgrade, but....
2] you must create first a slipstream CD of XP PRO SP3, which can certainly be done,
3} following previously issue procedure by MS, so that it can find the new information.
In the same vane, you can not slipstream Vista to SP1. MS is suppose to provide it.
Cheers
Rolando E Creagh, MD. FACS. USA. T61p, 64608WU, Dual Core Centrino 2.6 GHz, T9500, 8GB RAM, Intel TurboMem 4GB (working). HDD 0: 1.0TB 7.4K rpm AF w/ W-7 Ultimate SP1 64b (2nd clean install). HDD 1: 0.5TB 10K rpm w/ W-7 Ultimate SP1 64b (cloned). HDD 2:1TB 7.4K rpm AF w/W-7 SP1 64b (1rst clean install). HDD 3:250GB, Vista-B-SP2 clean install, HDD 4:100GB, XP-SP3, factory install. HDD 5:1.5TB, 5K rpm, AF, DATA. 2504-10U Mini-Dock

Downgrade from SP3 to SP2 XP

Hello,
Can I downgrade from servise pack 3 to servis pack 2 in WinXP in workstation? If yes then how?
Many thanks for your Answer, prosek
Solved!
Go to Solution.

If you update your SP2 system to SP3 and keep the backup files (that is by default), then you can easily downgrade by uninstalling SP3 from Add or Remove Programs in control panel.
Otherwise (upgrading to SP3 without backup or clean installing an SP3 integrated system) it is tricky, nearly MIP.

Can't move mail from Inbox to Folders nested within the Inbox after SP2 RU7 update

I'm running Exchange 2010 SP2 RU7 (Recently upgraded from SP2 RU3) after this upgrade it appears that I have users who can no longer move mail from their inbox into folders that are nested in their inbox. (not .pst folders) these folders reside on the server
with the mailbox. When the users try to move a mail they receive and error message that says "Cannot move the items. The item cannot be moved. It was either already moved or deleted, or access was denied." This behavior is always from a 2007 Outlook
Client (always)
From OWA when we try to perform the same action the error that comes up is "Some items could not be moved. This may be because the folder has reached it's size limit."
From 2010 Outlook client (NO PROBLEMS) can move mail without issue.
I've ensured the users mailbox is well within it's size limit. This is mailbox that has a 25G limit because of it's use. It currently using 4 gigs of space out of the 25g.
EVEN STRANGER....it's not all emails that are having the issue moving. It appears to be any / all emails that are generated. There's no one domain (at last count there were 29 different unique domains these emails are coming from). What I mean by generated
emails are emails coming out of ERP systems or CRM systems. Such as invoicing or process ordering. I don't know if that's just coincidence or not, but we've consistantly had no issues moving mail out of the inbox into folders as long as it was sent by a live
user mailbox.
Thanks for any feedback
#confusedITGyrl

Hi,
Based on my research, it’s a known issue that some users cannot delete some messages after installing Exchange 2010 SP2 RU6 or SP3:
http://support.microsoft.com/kb/2822208
And I recommend you try Martina’s suggestion.
Moreover, I also recommend you try to use MFCMapi to move emails from inbox to subfolder.
1) Download MFCMapi (found at: http://mfcmapi.codeplex.com/).
2) Run the tool on your client machine and click "Session" -> "Logon".
3) Select the Outlook profile in which you have been trying to move the data.
4) Double-click the container that shows the users' email address.
5) Expand "Root - Mailbox" and "IPM_SUBTREE".
6) Right-click on "Inbox" and select "Open contents table"
7) From here you will want to locate one of the encrypted messages and right-click on it and copy it to the sub-folder that has been your target when using Outlook.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

XP SP2 or XP SP3

Similar Messages

Maybe you are looking for