[XP64] Microphone does not work in WinXP 64

Hi,In Windows XP 64bit my microphone does not work, tried it in Ventrilo 2., Skype and even in the Windows Recorder. The computer don't detect any sound. Offcourse?I have selected the microphone in the recordering section in the Windows volume panel and the volume at maxium. Also in the volume panel under playback the microphone is not mute, set to max volume. I have also installed WinXP 32bits and here it works OK with exactly the same settings. Thats why I think it is because of my Soundcard driver, I have installed the latest driver from this site. I have a SoundBlaster X-Fi Fatality. Is there anyone with a X-Fi soundcard with the same problem or anyone where the microphone works in WinXP 64bit's Or is it a known problem?Please help me

Hi Theicewarrior,?Creative support has been aware of this issue for quite some time (6+ months, maybe even a year). The 4GB+?RAM driver/addressing issues are not a priority or they would have been addressed quite some time ago.
Presumably this is due to functional Vista drivers for the masses being a higher priority than the relati'vely few of us with 4GB+ RAM and an X-Fi.
While the X-Fi?is a great card, my only wish was that the vendor was forthright about this product not functioning with certain configurations. It is my feeling that?making an effort to help?customers choose?products that will work with their configurations would result in satisfied and repeat customers?and a better bottom line?as opposed to?eeking a few extra dollars out of a slightly larger customer base and?who are then left unsatisfied with a product and unwilling to buy a company's products in the future.Message Edited by Foddan on 07-9-20070:45 AM

Similar Messages

Microphone does not work in Facetime

Hi
I read other posts and in Maverik I didn't find simmilar problem, for most people their microphone does not work after few minutes, but in my case, microphone does not work at all in Facetime, so I can hear the other end, but they can not hear me! This happened after updating Mavericks.
My Mac specs:
Macbook Pro 2013
OSx 10.9.1 (Mavericks)
things I already tested:
I tried to use headphone and without headphone, but it didn't make any difference
Microphone works fine in Skype and other softwares (Audacity, YahooMessenger, etc.)
Tried with WiFi and with Ethernet cable
Internet speed is 2.3MBps
Router's firewall does not have any restriction for certain ports
Tried turning facetime Off and On
Tried to call iPhone 5s, iPad2 and MacBook Pro each in different network and different countries!
... and finally searching internet for hours (which obviously came up with nothing)
I'll be thankful if somebody help me through, all suggestions are welcome, so please don't hesitate to post.

Same issue here....
8-core Mac Pro, Lion, Original External iSight camera connected via FireWire 400 through the FireWire jack on the 23" Apple Cinema Display.
Audio and video work fine using iChat and making video clips through any/all apps.
However, using FaceTime.....incoming audio and video are fine, outgoing video is fine, but outgoing audio is missing. Nobady can hear me.
Sorry guys...you can't doll this one up or spin it in any other direction......it's a bug pure and simple.
Feel free to fix it whilst you're dealing with all the other problems that Lion has.
....sT

My microphone does not work on calls on my iPhone 4

Don't ask me what has happened and I have been through all of the troubleshooting that I can on my own.
I have no clue how to get a hold of a LIVE AT&T person or APPLE person.
The problem is my microphone does not work when I use the telephone, whether I make the call or someone calls me. It is NOT the MUTE button. And yes, I have already rebooted my iPhone about 5 times now. Has not fixed it either.
But the microphone DOES work as I was able to record a new voicemail greeting to let people know my phone isn't working.
So, they could call me all day long but they won't hear me, so who do I call using my landline (thankfully I kept it).
It is the day after Thanksgiving and I would be a fool to head over to the Apple Store or the AT&T Store....
Thank-you,
Marcia

Try disconnecting the headphones and then adjusting the volume, does it say headphones?
There might be something in the headphone jack, maybe lint, dirt, or something else in there.
Take a look at this Apple document for more information -> iPhone: Can't hear through the receiver or speakers

Microphone does not work after restarting computer

I just received the Creative Xmod soundcard yesterday after using an Icemat siberia usb headset sound card for a couple months. The sound is a lot better with the creative soundcard however, if I restart my computer and go back into ventrilo, my microphone does not work. It doesnt make any sound when I talk into it (almost as if it muted itself) but it hasnt. I check my sound settings and everything is the way it should be.....but the mic isnt producing any sound. It is not my headphones that is causing the problem because I have never had this problem with my old icemat soundcard. I am currently using :
Sennheiser PC350 headset
Windows XP Home Edition
The newest version of Ventrilo

http://picsend.net/images/240403ventsetup.JPG
That is how I have ventrilo setup. A friend of mine said I should Mux set to Record Control, but it only gives me the option for Wave In =/

Recently installed Windows 7 on Pavilion dv6748us - internal microphone does not work

Hi,
sojo972 wrote:
I have been searching the web extensively, without success, to find how to resolve this issue.
I recently installed Windows 7, 32 bit, on my wife's HP Pavilion dv6748us laptop. Now her internal microphone does not work.
Have gotten some "roadside" advice to use a Windows Vista driver; Have no idea what the driver is or how to get it.
Have found some information about uninstalling realtek audio driver and reinstalling an older version; Have no idea on this one either.
Would really appreciate a definitive answer with a positive result.
Thanks for all help.
The drivers for the laptop are located here. select Vista and Driver-audio. The Vista driver should work. You can uninstall the driver from within the Device manager. Start --> type devmgmt.msc and the device manager will open. Locate the HD audio device and right-click it and update the driver.
After that is done go to Control Panel and Sound and the recording tab up top. Check to see if the microphone is grayed out. (not grayed out means driver is properly installed). The microphone should also have a green checkmark next to it. It is now a matter of selecting the microphone then selecting Properties to enable the microphone and then test and adjust the input level. Look at the tabs (listen,levels and advanced).
Had you considered trying Windows update or the Realtec website as a drivers source?
regards,
erico
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Hi:
Looking at your system information you could have one of two possible audio cards:
Conexant HD audio or the RealTek HD Audio
The fact that you couldn't install the RealTek HD audio driver indicates to me that you don't have a RealTek audio card. Check your device manager and look at your sound card and check to make sure which audio card you have.
Here is the Vista 32 bit driver for the Conexant audio card:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Here is the Vista 32 bit driver for the Realtek audio card:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
If you in fact have the Realtek audio card, I would download and install the latest, greatest HD driver directly from the RealTek site:
Accept the agreement, download and install the first one on the list. Maybe it has been updated to fix the issue you are experiencing.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Paul

My microphone does not work. pavillion dv7-1129wm running windos7

Please friends I need help my microphone does not work since installing windos 7, andreinstalled the sound and nothing and download the codes and nothing, not what else to do .... I need your help thanks.

I don't know if this is related: [http://discussions.apple.com/thread.jspa?threadID=2160988&tstart=660]
It's a Skype problem. The program automatically selects the DIGITAL input. You need to change it to the RealTex internal microphone.
From Skype, go into Tools -> Options -> Audio Settings and make sure the microphone is selected instead of the digital input.
I think it would also help to verify the microphone is working at all. I don't have experience with external microphones so you'll have to wait for other suggestions as to that, unless you can do it yourself.

After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out

After upgrading to ios8 my 4s text dictation microphone does not work and is "greyed" out. There is no function at all.

Ok I fixed the issue, turns out a couple of weeks ago, I downloaded a program that was suppose to help shrink some of your stuff to use less data, it was called Onavo. It was suppose to show you how much data you use to help keep you within your limits. If you have downloaded this, go through your settings and delete it and it will fix the problem. At least it did for me. I can now send photo's to non Iphone users via text no problem.

Bought iphone4 and the microphone does not work only if we use in speak mode. How is it possible to fix

I bought two iphone4 in Miami and one of them appared a problem that the microphone does not work in normal call only if i use the speak mode. I am living in Manaus - Amazonas - Brazil and we do not have an apple store to complain it.
Question.
How is it possible to fix this problem ?
Maria Filomena Kimura

Unfortunately, the warranty is NOT international. You will have to send the defective phone to someone in the U.S. and ask them to take it into the Apple Store for replacement, then have them ship it back to you. Apple will not accept the International shipment, nor will they ship a replacement phone out of the country where it has warranty coverage.
There are 4 carriers in Brazil who sell the iPhone, including one which sells it completely unlocked. You probably would have been better off to purchase them there if that's where you live.

[SOLVED] Microphone does not work after fresh install

Hello all,
I just installed arch a week or so ago, everything is great except from
the fact that my microphone does not seem to work (at least with
skype)..
This is the output of amixer:
[jorge@flamingo ~]$ amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 57 [89%] [-5.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',1
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 183 [72%] [-14.40dB]
Front Right: Playback 183 [72%] [-14.40dB]
Simple mixer control 'Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Mic In'
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Playback Source',0
Capabilities: enum
Items: 'Digital Playback' 'ADAT' 'Analog Mux 1' 'Analog Mux 2' 'Analog Mux 3'
Item0: 'Digital Playback'
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 3
Mono: Playback 0 [0%] [-18.00dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [on]
Front Right: Capture 14 [100%] [21.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [off]
Front Right: Capture 14 [100%] [21.00dB] [off]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [off]
Front Right: Capture 14 [100%] [21.00dB] [off]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 115 [96%] [27.50dB]
Front Right: Capture 115 [96%] [27.50dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Input Source',2
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Mux',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
Simple mixer control 'Mux',1
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
Simple mixer control 'Mux',2
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
[jorge@flamingo ~]$
The capture section seems to be ok.. However when I am using skype,
the people I call only hear a noise and nothing else. I confirmed that with
skype call testing service..
Moreover, the levels of the mixer are ok and nothing is muted.
Finally, the mic itself works fine, I dual boot with XP and I didn't have
any problems with skype there..
Please let me know what other information you need..
Many thanks in advance.
Last edited by geo909 (2011-02-23 01:23:28)

alterecco wrote:
If you are using alsa, then remember to go into alsamixer and turn up your microphone volumes and set a device as the capture device.
Basically, go to the capture pane (F4), navigate to the capture device you want to use, and press Space to toggle it on.
First of all, I'm so sorry for the late reply.. I didn't have access to a pc for a long time.
And actually your suggestion did the job! I don't believe it was something that simple,
I spent hours googling around and trying all sorts of stuff..
Thanks a lot!!!

Re: Satellite Pro L500-1PU - internal microphone does not work

I have an L500 -1PU Toshiba, running on 32 bit Windows 7,
The webcam is working wonderfully but the internal microphone is not working properly.
I had an external microphone so i hadn't noticed this problem when i got on skype, but i've recently discovered that when using the webcam the person on the other end can hear faint noises from my computer when i'm playing music or watching a video clip.
How can i solve this and get my microphone working properly such that i can control the volume and actually get full service from my otherwise decent notebook?
Thanks

Hi
Possibly this Toshiba FAQ could help you:
+Whistling sound on the Satellite L500+
http://aps2.toshiba-tro.de/kb0/TSB0402UB0001R01.htm
Its a matter of the settings.
This issue occurs if the microphone volume in the speakers properties is enabled.
After disabling this point the issue with acoustic feedback does not appear anymore.
Hope this helps!

My microphone does not work with Skype...

...but it works with everything else! I have tried every test, every setting, downloaded new drivers, restarted the computer, followed every Skype how-to to check every device setting and nothing works.
I am using a Digital Innovations ChatCam model # 4310300. As I mentioned I have used it with Microsoft Movie Maker and the sound is fine, but with Skype it does not work, I just tried using the echo test call and nothing.
Any help is appreciated!
Kurt

There is always the possibility that there is an oddity in how the camera registers as an audio device or something is missing from the drivers being used that generates a compatibility issue with Skype. Have you tried using a virtual driver to try to resolve the issue? Try using Manycam ( http://manycam.com ). If the camera part works, you don't have to use the virtual cam part, but you might want to try the virtual microphone is has and associated that with your webcam mic. This way you can see if the manycam virtual mic will allow the audio to be registered in Skype.

My Creative Fatality Headset, the microphone does not work!! please help

Hi..
I just received my Creative Fatality Gaming Headset last night, it's not the USB, so it's the straight plug in..And my microphone does not seem to be working, it is detected by my computer as "working" but I can't hear $hit to tell you the truth..I called Tech service a couple times and it was , i notice that a lot of people seem to be sharing the same issue, any help? It would be awesome to get my microphone working. Thanks

Hey mate.
Could you please say what soundcard you're using?

M305-s4822 Built in microphone does not work

Help my built in micorophone does not work.
WiFi works somtimes not. What has happened to Toshiba quality?
Hope some one can help trying to fix for my daughter it is her college computer. I would return it but it is out of warrenty.
Very Unhappy with this machine.
GA

You can't hear other callers:
Why can't I hear the other person in Skype for Mac OS X?
Other callers can't hear you:
Why can’t my friend hear me on Skype for Mac OS X?

Logitech USB microphone does not work with OS 10.4.11

My logitech USB microphone was working fine, at one time. Now it does not function. In the sound prefs setup, it shows a level reading, as if it is hearing the input, but there is no output. I have tried every setting I could find in Audio Midi Setup as well, and nothing seems to work, and the "thru" option is not available. Can somebody help me here?

Hi stuntmedia, and a warm welcome to the forums!
See if it's the Mute button first...
http://www.macosxhints.com/article.php?story=20070714102116127
If that doesn't work, LineIn should...
http://www.rogueamoeba.com/freebies/

Continuity: Microphone does not work during Continuity/iPhone calls

MacPro, Yosemite (10.10.2)
iPhone 4S, 8.1.3
Continuity has worked fine for me in the past. However, I now have an issue where I can make calls from my Mac....they go through with trouble....but my microphone is not passed through to the call. I can hear them...they cannot hear me.
Voice-to-text, FaceTime, and Skype all work fine, so I know that my microphone is not having troubles.
This is the first time I have used this since upgrading to 10.10.2 or ios 8.1.3. So, possibly related...possibly not.
Ideas?

Errr.....sorry guys. I mis-typed something....
When I make a call, it goes through WITHOUT any trouble. No trouble that is except nobody can hear me.

[XP64] Microphone does not work in WinXP 64

Similar Messages

Maybe you are looking for