Xpath expression in Left and Right operand for Receiver determination

Hi Experts,
Is it possible to use an Xpath expression in both the Left and Right operand inside the Receiver determination e.g.
(/Message/line/IDNumber = /Message/line/IDNo)
Any help will be appreciated.
Thank you,
Brendon

in standard receiver determination you can only specify value for the right operand.
that is one of the reasons you go for enhanced receiver determination
as mentioned in the sap help
If you are using the condition editor to define receiver determinations or interface determinations, you can only use the expression editor to create an expression for the left operand. You must specify a value for the right operand.

Similar Messages

? how to add page numbers in pages 5.2, starting with 2. Pages '09 had an option to not show folio on page one. Also any how to do left and right folios for a Tabloid? Many trhanks

? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .

Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl

Adjusting Left And Right Balance for INPUT - SB Audigy 2

Hi Guys,
I'm using an SB Audigy 2 ZS with the latest drivers. I realize that it is possible to adjust the left/right balance for speaker OUTPUT, but Is it possible to adjust the left/right balance for the inputs? I'm doing some recording and I want to set different input levels for the left and right side of the CD Digital In as well as the Aux Line In. So either either a way to control left/right input balance or seperate input levels for left/right would be helpful.

Thanks in advance,
Steve

Thanks but I need real time. If I use a mic for the right input and a seperate mic for the left input I want to be able to set the optimum recording level for each side/mic. If I just set the level for the louder of the 2 mics then the other mic level on the other side is set too low You would think that Creative could have included this as a software control.
Also, if I record using the "Digital Input' and the 'Aux Line In" at the same time then you must select "Record What You Hear" from the Creative Control Panel. Both sources are mixed togther, if I could set the CD Digatl output to left side only then I could record CD Digital on the left side and Line Input on the right.
I just wish the Audigy could do this as it would be a cheap software control, I don't won't to buy another soundcard.

I am having major problems with my trackpad on my macbook pro. I can no longer press down on the bottom left and right corners for it to click and follow my command. Please can anyone help?

I am having major problems with my track pad on my macbook pro. Even though my settings haven't changed...my trackpad is no longer responding as it did before. The left hand corner no longer clicks when I press it and my personal commands which I set up in preferences no longer seem to be workin. Please help!

Some websites have an internal mute or volume setting. If that's not the issue, see below.
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
          Delete All Site Data and Settings
then click Delete Data. Close the preference pane.

True Stereo Left and Right Separation from Mac

Hello All,
This is quite long so please be patient.
I am trying to figure out if there is a way to get "true" left and right playback for split tracks through iTunes. By "true" I mean that neither the right track bleeds through the left or left through right. I use a lot of split tracks in our church and am trying to do it straight through iTunes.
I tested it with a stereo feed coming from the headphone jack to two independent speakers playing through iTunes. The instruments come out the right and the vocals come out the left. When I unplugged the left speaker (vocal) I could hear the vocal bleeding through the right speaker.
To further test this I burned a CD of the same song, played it through a stereo and could separate the left and right audio. I played the same CD through iTunes and unplugged the left speaker and could hear the vocal bleeding through the right speaker.
One last test, I opened Quicktime and selected the same track from the CD, played it through Quicktime, unplugged the left speaker and the vocal did NOT bleed through the right speaker.
So lesson learned, unless I am missing something - iTunes cannot really separate left and right signal from mp3's on the hard drive or burned audio on a CD.
By the way, if anyone knows how to accomplish this true split I would be grateful to hear it.
Thanks,
Greg

Ok.... I did some further testing.
I went back and noticed that in preferences under playback there is a checkbox for sound enhancer. With this checked you will get bleed of the left channel into the right channel. With it unchecked you will get the separation needed to play split tracks. Looks like I answered my own question. Hahaha.
Thanks everyone that looked into this,
Greg

I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the maste

I am writing a book and need to have the margins alternating left and right pages, so that there is sufficient margin for the binding. I have tried different inside and outside margins, the same inside and outside margins, facing pages, changing the master, and I cannot get the margins to alternate at print time. The larger margin is always on the left. Can anyone please help me on this, as I have spent hours and lots of ink.

Set up as facing pages with a larger inside margin.

Left and right channel panning for drummer backing tracks in Garageband - HELP

Hi there
OK, so I've finished my song on garageband that I've recorded with a USB keyboard with many STEREO keyboard parts and a click track.
I need to be able to mix down to the following specification for my drummer.
Left Channel - Mono keyboard sounds (to goto PA)
Right Channel - Same Mono keyboard sounds plus click track (to be heard through headphones)
So basically the keyboard will be the same mono track at the same volume playing through both the left and right. I cant simply put the stereo keyboard sound in the centre as that would mean the drummer would get SOME parts of the keyboards stereo fields and the PA would get the other parts of the stereo field so it wouldnt sound right.
Any ideas how to do this?
I hope I've explained myself OK

I need to be able to mix down to the following specification for my drummer.
Left Channel - Mono keyboard sounds (to goto PA)
Right Channel - Same Mono keyboard sounds plus click track (to be heard through headphones)
Here are instructions on how to split a stereo track into mono tracks:
http://www.bulletsandbones.com/GB/FAQPages/StereoToMono.html
On top of this, you will want to re-import the mono keyboard track back into Garageband, duplicate it onto a 2nd mono track, then add the click track (on a separate 3rd mono track of course). Then pan one mono keyboard track hard left, and pan the other mono keyboard track hard right and the click track hard right as well. Export as normal and everything should be good.

I am being charged for 3 GB that apparently Verizon hadn't caught up on that I had used!! The last night of my cycle I called and checked and I had .5 GB left and right before midnight when the cycle ended it caught up on 3 GB!! I now have to pay for this

SO CRAPPY!!! SO FED UP WITH VERIZON!! WE ARE GETTING SCREWED OVER!! I am being charged for 3 GB that apparently Verizon hadn't caught up on that I had used!! The last night of my cycle I called and checked and I had .5 GB left and right before midnight when the cycle ended it caught up on 3 GB!! I now have to pay for this data I know I did not use! I never have my data on!! Now it says I used 7 GB last month!!!

Data usages are always estimated...I don't believe any carrier post data usage in real time. I've had my data increased due to a large chunk being unaccounted for at the time of my cycle. Thankfully when I'm billed for it...it has never pushed me over my limit.

Left and right mouse coding for games

Hi
Can anyone point me in the right direction on where to find actionscript 2/3 coding for left and right mouse clicks for gaming. I am a student and want to design a game that will use both left and right mouse clicks on a object that will give different results depending on which mouse click you had made.
For example on a red object you click right, on a blue object you click left. Depending on how you clicked on a object will determine the next step in the code.
Does this make sense?
Cheers
Beth

I believe there is no method provided for isolating right clicks with a mouse in Flash. The right click is reserved for pulling up a menu and there are no properties associated with it in the code.

Why we need two Joins (Left and Right)

Hi,
Why we need two joins while we can do it just by replacing the tables?
Query 1.
SELECT e.ename, d.dname
FROM emp e LEFT JOIN dept d ON e.deptno = d.deptno ;
Query 2.
SELECT e.ename, d.dname
FROM emp e RIGHT JOIN dept d ON e.deptno = d.deptno ;
The same result of Query 2 can be get from following query with LEFT JOIN.
Query 3.
SELECT e.ename, d.dname
FROM dept d LEFT JOIN emp e ON e.deptno = d.deptno ;
So why we need LEFT and RIGHT Joins while we can do this by just replacing tables position ( as in Query2 and Query3).
Regards,
Danish

Danish wrote:
Any other suggestions?What do you find lacking in the answers that have been suggested so far?
Why would you restrict the syntax so that you only had one of the two syntax options? That forces developers to write queries in a particular way. If you only had a LEFT OUTER JOIN operator, for example, the first table would always have to be the one that drove the number of rows in the result set. Sometimes (most of the time in my experience), that's a sensible way to approach the problem. But occasionally you get problems where you want to start with the sparse tables and join to the denser tables and having the RIGHT OUTER JOIN makes it much easier to approach the problem that way.
Re-ordering the tables in a query using ANSI syntax is also not necessarily a trivial endeavor. If you're working on building up a query (i.e. join 3 tables, verify the results, join a fourth table, verify the results, etc.) it's potentially non-trivial to change the order of the tables-- you may find that you've inadvertently changed the semantics of your query and now you have to backtrack a bit to verify the new logic.
It's also the same reason that you have multiple ways to write a loop or multiple ways to iterate through a collection. While it's completely possible to rewrite any loop in the form
LOOP
<<do something>>
EXIT WHEN <<something>>
<<do something else>>
END LOOP;that's not always the clearest way to express a piece of logic. Generally, a nice FOR loop or a nice WHILE loop is simply a clearer and cleaner solution. Similarly, sometimes a LEFT OUTER JOIN is a clearer way of expressing a SQL statement and sometimes a RIGHT OUTER JOIN is a clearer way of expressing it.
Justin

Touchpad left and right clicks don't work on Yoga 2 pro

Hi,
I just bought a a yoga 2 pro. After setting up, I found that the two bottom keys, left and right keys on the trackpad do not work. Double tap also doesn't work. I reinstall the touchpad driver to no avail. Other gestures on the touchpad work fine, single tap registers as left click, two finger scroll also works. Also, when I use a blue tooth mouse, left and right key works fine.
I am not sure if this is a hardware problem as when I swipe on the area of the two bottom keys, they register the movement. Just not click. Anyone can help me?

Hello,
I've had a Yoga2 Pro now for six months or so. Just recently the left click stopped working correctly. What I notice is that when holding down the left click button on the touch pad, and I try to drag a slider (like a volume slider or to drag a selection box or to drag a scroll box on a page, or to highlight text) and it stops holding down the click. Sometimes it works, sometimes it keeps stopping.
Now, the right click is malfunctioning as well. I press right click on something like an image, and nothing happens. I have to right click on something 2-10 times now for it to register that I'm right clicking.
Also, should I be able to tap the touchpad with two fingers and have that be a right click, or am I just reading that I should be able to do that on the screen (which can)?
I have downloaded the drivers for the y2p touchpad and the y2-13 and the generic ones from the synaptics webpage, but before I uninstall my drivers and try to install those, I want to be sure that is the correct and only possible fix. I'm hoping its not a hardware malfunction. I am running Win 8.1.
Thank you.

My ipod's music quality is inferior. It doesnt have the surround sound/ left and right audio channel unlike my brothers ipod? is there a problem with the chip?

I have an ipod touch 4g (8GB), I got this about 2.5 months ago, the same time my brother get his. My problem is that I noticed that audio quality is better on his device than mine. I have been listening to music and had different music devices before (non-Apple product and mobile phone) and the quality of music is better when I used to listen to those devices as well as my brother's ipod touch. Im referring to the left and right audio channels. Im not so good about the technical stuff but the best explanation I can give you is in a music or a movie, there's an effect wherein you can here a sound only at the left ear phone/speaker that you cant hear at the right earphone/speaker. I mean for example in a song, a guitar intro can be heared only at the left
ear while the background music plays on the other ear. Or when theres and echo effect on the song that alternates sound on the left and right ear. I hope youre getting what Im trying to say. Im bothered that my ipod is fake or has an internal problem on the chips or something because I didnt bought this at an Apple Center/Mac Center. I bought it on a retailer. I am not able to visit any store or Genius Bar or contact an apple specialist through phone because of my work schedule and work load. I have contacted the retailer before when I tried to return it for replacement or repair but he told me that it is under Apple's warranty, not theirs. I do hope that I can get a help from you because I want to really enjoy my device. Thank you and Im looking forward for the responce/assistance form you.

I suggest you don't apply pressure to the screen - it's a Touch - you touch the screen not push it.
Phil

How do I deal with audio, seperate left and right and make each stereo--CS5

I have a two mono mike recording which I can seperate into two seperate audio timeline tracks one is now left track in a seperate timline and the other is right in the other timeline, how do I make each of these tracks then into psuedo stereo tracks? Do I have to go to Soundbooth or is there a simple way in Premiere?

Bill G, tell me what I am missing and I'll use your method. I have what I think you are describing, and I don't understand the need to do anything special, if you use channel mapping.
I record a lav on one channel, and a different wireless mic on the other. When captured, I have a clip that PR would normally treat as a single stereo track.
BEFORE putting any clips on the timeline, select all clips and set channel mapping. Set each channel to mono. Now PR treats these as two mono tracks. The output for each mono is the master track, which in my project is stereo. I can change "volume" for each track in the mixer, etc. but each channel is provided to the left and right master output.
I didn't go back to sort out what you had, but if you had two stereo tracks, one each with a left and right channel only, I can see that you needed some other solution.

ITunes 7 playing only from left and right channels with 5.1 speakers

I have an SB Audigy 1 sound card with Creative Inspire 5200 digital 5.1 speakers, and iTunes only plays audio from the left and right speakers, and the subwoofer. The other 3 speakers work; I've tested them.

I am having more or less the same problems as you guys. Currently I use a soundblaster audigy 4 with "CMSS 3D" function ... it used to work with itunes but started to get all weird with the 7.0 update. If nobody knows how to fix this I will have to use 6.xx again :/
I'd be grateful for any advice as well,
thanks in advance.
Windows XP

Display resolution is different left and right sides

Hi, my HP G42 laptop now has a different display resolution on the left and right sides. The left half seems to have less resolution than the right side, the right side looks like it's in HD, the left side looks washed out. I'm not sure if it is a hardware issue or a setting/software issue. The first time it appeared was after a windows 7 update was completed and installed, I'm not sure if that was just a coincidence. Any suggestions would be greatly appreciated. It works but is very annoying to look at.
Thank you,
Ray

Hi Ray_M,
Welcome to the HP Forums! I see that you are having a problem with two different resolutions on each half of your screen. The easiest way to determine where the problem lies is to connect it to an external monitor. If the image is normal then we know it is an issue with the display screen but if the issue occurs on the external monitor then we know it is a problem with the drivers or the video card itself.
What is the product number for your g42? There are a number of different models in that series.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Xpath expression in Left and Right operand for Receiver determination

Similar Messages

Maybe you are looking for