Xperia arc S LT18i - contact issues after ICS update

I've encountered an ICS problem regarding contacts. Contact search field is not functioning well when searching for a specific name..i found this problem while trying to text somebody. Contact search field wasn't accurate at all after ICS update...

Can you please elaborate on this issue? What exactly do you get when you start typing out a contact name?
What are your thoughts about this forum? Let us know by doing this short survey.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Xperia arc s is extremely buggy after ICS update

    The following issues have appeared after det Android 4.0 update:
    1. The phone restarts all the time without any prior warning (extremly annoying)
    2. Bad Wifi reception.
    3. Apps freeze and shut down all the time( A am aware that this could just as well be apps not optimized for ICS)
    4. Charging the battery seems to be much slower.
    Any bugfixes comming out soon? Anything I can do, except maybe get a Samsung instead?

    Hello
    I got with my phone Arc with similar problems. Update was successful only at the third attempt, the phone responds much more slowly than in Version 2.3 ... Wi-Fi connection which is switched off and disconnected so by watching the Internet, You Tube... This is not happening before the update. Starting applications is much slower than before. For some even changed commands              :( . Mostly everything is much slower. Only appearance is more beautiful ... the rest?? Before I update to ICS 4, all work better and smoother.
    Why?

  • Has anyone else had email notification issues after ICS update?

    After the ICS update, I am not longer getting any email notifications.  I only get notifications after I open the stock mail app and it loads the emails.  I have unistalled/reinstalled numerous times without any change.  I have looked through the new ICS settings to see if switch got changed, without any luck.  Has anyone else run into this issue?  Thank you in advance

    I think if you delete data and cache from the email app, then re-add your email address, it should help.

  • Widget text issue after ICS update

    After my Droid Bionic upgraded to ICS, most of the text and numbers displayed in each of my widgets appear scrambled.  I have Calendar, WeatherBug, SportsTap, and a stocks widget up and running.The Calendar app sometimes appears normal, but the rest all have scrambled text and numbers.
    I've changed wallpapers multiple times, both regular and Live, with no effect.  I have also rebooted numerous times, in which the widget texts appear normal afterwards, but eventually become scrambled again.
    Anyone else experiencing this? 

    Have you tried clearing the system cache and/or uninstalling and reinstalling the apps?  A system cache after an OS update is useful since it clears out any leftover code from the previous OS; it won't delete any of your files.
    Clear system cache
    Power down phone
    Hold volume up/down & power simultaneously
    Use volume down to navigate to 'Recovery', use volume up to select
    Should see screen with triangle and exclamation point next to an Android
    Press volume up/down simultaneously
    Use volume rocker to navigate to 'wipe cache' and use power button to select
    Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select

  • Issues after ICS Update to Neo V

    1. Performance lag is there although I have removed many apps and Internal memory as well as RAM available is more than what it was earlier. Any suggestions?
    2. Apps crash. The most worrysome is the scenario when you are not able to receive a call because concerned app is crashed. After that no trace of call so you can not even call back. This has happened couple of times after update on 25th April.
    3. Today morning I used camera with smile detection on. Camera kept clicking pictures after detecting the smiles. Auto click was off. Any one else faced this problem?
    4. In ICS, you can not do screen capture by pressing power button? I read some where to use Power button & volume down button simultaneously. However it some times works, most of the time does not. Any suggestion.
    Madan Mohan
    Solved!
    Go to Solution.

    1) it is suggested to format SD card and reinstall your phone's software again using PCC or SUS
    2) Same as above
    3) if you will set it to smile detection, obviously it will click pics when you will smile ( again and again)
    4) same as 1 and 2, just take care to press at the same time ( exact) and hold them there unitil you take a shot
    Conclusion :  Please format your sd card and reinstall your phone's software using pcc.
    Your experience may change
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • (Xperia Ray) Can't install Apps after ICS update !

    HI everyone.
    I bought mine (Xperia Ray)  couple of days ago and updated It to ICS with the update service software.
    now I can't install any apps.
    when I click the install button (The picture) where It shows the permissions the app needs, nothing happens.
    when I Click the cancel button, (obviously) It cancels the process.
    any ideas !?
    thanks
    Solved!
    Go to Solution.

    how come you can't ?
    you don't have the market? if you don't then flash the global generic firmware and you will have it  (the market)
    How to manually update 2011 Xperias to android 4.0.4 build number 4.1.B.0.431
    http://talk.sonymobile.com/thread/38251
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • How to connect Xperia ray with PC over WiFi after ICS update?

    Please don't tell me this option is now disabled. I also have the WiFi drop issues like many people before me but i assume we will have to wait untill the update for that fix. Needless to say, phone was working perfectly before this update.

    The issue is with WPA and WPA2:
    0day 00:59:03 wlan0: A wireless client is associated - XX:XX:XX:XX:XX:XX
    0day 00:59:06 wlan0: A STA is rejected by 802.1x daemon - XX:XX:XX:XX:XX:XX
    0day 00:59:06 wlan0: WPA2-AES PSK authentication in progress...
    0day 00:59:06 wlan0: A wireless client is associated - XX:XX:XX:XX:XX:XX
    0day 00:59:10 wlan0: A STA is rejected by 802.1x daemon - XX:XX:XX:XX:XX:XX
    0day 00:59:10 wlan0: WPA2-AES PSK authentication in progress...
    0day 00:59:10 wlan0: A wireless client is associated - XX:XX:XX:XX:XX:XX
    0day 00:59:13 wlan0: A STA is rejected by 802.1x daemon - XX:XX:XX:XX:XX:XX
    0day 00:59:13 wlan0: WPA2-AES PSK authentication in progress...
    0day 00:59:13 wlan0: A wireless client is associated - XX:XX:XX:XX:XX:XX
    0day 00:59:16 wlan0: A STA is rejected by 802.1x daemon - XX:XX:XX:XX:XX:XX
    and so on...
    XX:XX:XX:XX:XX:XX is my MAC
    as you can see in few seconds the phone is connected and then refused by the access point.

  • Issues in ICS update for Xperia Arc

    I am using Xperia Arc. I have done the ICS update recently and I am totally disappointed with this update. The thing is some features already there in the 2.3.4 version of android is not there in ICS update.
    When long press the power button ‘take screenshot’ option was there in the 2.3.4 but in ICS that option is not there.
    I have seen the beautiful lock screen in ICS forums but it is missing in the ICS update
    Music player is still same like 2.3.4 android version. I was expecting the custom equalizer as like Arc S . but it is not there in Arc ICS update
    Google says recently opened apps will be displayed in the home screen in ICS. But its missing in the my ICS update.
    Google says live and transformation effects are there in ICS but I am not able to see those things in my Xperia Arc after ICS update.
    Kindly let me know is there any solutions for the above issues..
    Thanks
    Manivannan

    1. You take screenshot by long pressing power and volume down button (booth at same time) in ICS, thats how google has made it.
    2. What beautiful lockscreen are you talking about? Sony has kept the lockscreen same because thats the lock screen many users are used to.
    3. Yes music player is same. I have an Arc S, the music player is same. The music player with equalizer is in Xperia S not in Arc S.
    4. Google never said any such things. You can see the recently opened apps by LONG PRESSING THE HOME BUTTON and can close them by Swiping it off the screen.
    5. Once again Google didnt say any such thing. If you want to change transision effects and stuff use Apex Launcher instead of Sony's launcher. You can get Apex launcher for free from Play Store.
    Hope i helped. If you have any question ask i'll try to help.

  • After ICS update, stock email not syncing for exchange 2010 activesync.

    After ICS update, stock email not syncing for exchange 2010 activesync.
    My corporate email which was flawlessly working before ICS update. Even though I tried re-creating a new account, it hangs "waiting for sync"
    Has any patch been released or explicit instructions have been provided ?
    First sync:
    5/3/2012 7:47 PM
    Last successful sync:
    Not Available
    Folders synced:
    0
    Device name:
    Not Available
    Device model:
    MT11i
    Phone number:
    Not Available
    Mobile network:
    Not Available
    Device type:
    Android
    Device ID:
    xxxxxxxxxxxxxxxxxxx
    Device IMEI:
    Not Available
    Device OS:
    Android 4.0.3
    Device language:
    Not Available
    User agent:
    Android/4.0.3-EAS-1.3
    Access state:
    Access Granted
    Access set by:
    Global Permissions
    Policy applied:
    Active Sync Policy - Partially applied
    Policy updated:
    5/5/2012 8:11 AM
    ActiveSync version:
    14.1
    Also at http://talk.sonymobile.com/message/184221
    Whyr is this defect "assumed answered" ? I went though all the posts and didnt find any solution?

    Hopefully my reply to this can help.
    http://talk.sonymobile.com/message/190149#190149
    And please try to keep same problem in same thread.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • No audio after ICS update.

    After ICS update, have lost audio playback. In settings, speaker has single line crossing thru it showing audio is muted. Can not unmute audio. Same for audio 'alerts'. Have rebooted and pulled battery to no avail. Ideas?

    I also have the same problem with the sound going in an out and lines through the speaker/notification etc. I called tech support and they actually told me to come on this forum and look for solutions, because the update has problems. I certainly didn't really understand that message...45 minutes waiting on hold to tell me to check the boards. Oh well. Any answers let us all know. :-)

  • Is there a fix for the wifi connectivity issue after ios6 update?

    Is there a fix for the wifi connectivity issue after ios6 update?
    Cannot connect to any wifi since update to 6.0.1
    How do I get update to 6.0.2?
    Will that even help?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Date format Issue after HRSP Update

    Hi,
    We are faced with a strange issue after HRSP update was applied on our client system (upgraded from SAP-KE-30 to SAP-KE-36).
    There is an outgoing interface which picks up all the the starters into the local government pension scheme and updates a B2A document. This is implemented via a z-program.
    When we look at the out put after the interface has run for the  vast majority of employees it shows their date of birth as 21.05.1968 when it should show it as 21051968. This only appears to have happen after the HRSP's have been applied.
    No modifications have been made to the z-program. What could be the reason for this issue. has anyone faced such an issue post HRSP update?
    Any pointers on how to further investigate and resolve the issue will be most helpful.
    Regards

    Hello Iside,
    In this case we can try to reload the software on the BlackBerry Smartphone to make sure it is running the latest version and there are no issues with the OS on the device.
    To do this we would need to back up the BlackBerry Smartphone. Please open the BlackBerry Desktop Manager and connect your device. Click on the Backup and Restore options and select Back Up. Please note the location where the backup is being saved as we will need to access it later to restore the BlackBerry Smartphone.
    Once you have backed up your BlackBerry Smartphone please follow the link below to complete a clean reload of the BlackBerry Smartphone software.
    Link: http://www.blackberry.com/btsc/KB11320
    Please test the date once the software is reloaded prior to restoring the backup.
    Thank you
    -DrP
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Doc to go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro

    Doc To Go issue after ipad update ios 6.0 doc to go keeps dropping can't sync MacBook Pro (15-inch Late 2011), Mac OS X (10.7.5), ipad iOS 6.0

    Post in the iPad forum, this one is for OSX

  • Exchange 2010 - Issues after rollup update installation.

    Exchange 2010 - Issues after rollup update installation.
    We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
    Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
    An unexpected error occurred and your request couldn't be handled. and
    Your network connection is unavailable. Please reconnect and try again.
    Issue2 - When I open the Exchange Management Shell I get the following error:
    Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
    Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
    hope that it will be fixed after resolving issues 1 and 2.
    We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
    Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
    Please help.
    Thanks.
    Greg

    Hi,
    Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
    "An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
    For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
    Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Elite Pro, CMSS-3D not working and other issues after driver update

    DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
    The only time it works is if the original drivers are installed from the installation CD.
    ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
    Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
    Now regardless of what drivers are installed, there?are no longer any on screen indicators.
    The indicators looked like the ones that show when using the remote controller.
    Anyone have any ideas?

    Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
    http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
    http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
    http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
    http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
    http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
    http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
    http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
    http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
    http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
    http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
    http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
    http://rapidshare.com/files/25244022/[email protected]7.254.6.0

Maybe you are looking for

  • Error While Opening PDF File in SAP Inbox

    Hello Experts, I am facing a weird error in SAP Inbox while opening a PDF files (both created by custom ABAP programs as well as the one attached to a new SAP Inbox message from my desktop & sent to my Inbox as a test). The error states that "This fi

  • Error while testing a web service using JMSAdapter in ESB

    Hi, I have configured a JMS adapter to produce a message on a Topic. When ever I test the web service to invoke this service I get the following error : <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:F

  • X1 and an additional screen

    Hi there, I would like to use my X1 as primary screen and my additional 27" display as secondary. I bought the USB 2.0 port replicator, but I dont like it very much at all. It is lagging and not that functional as I would have liked, which is why I w

  • Life and work events in my sap erp 2005

    hi, BP used My SAP ERP i do find workset related to life and work events in the BP. I also find various links in the workset to view  LWE namely Benefits, Birth/Adoption, Change Status etc. But when I click any of these links they do nt show any Life

  • Creating SAP R/3 source system in BI7

    Hi Gurus, Could anyone tell me how to create SAP R/3 source system in BI7 and how to configure RFC for BI7 and SAP R/3 4.7? Thanks in advance Muthu