Xperia arc s, no system upgrade..

no system update on my xperia arc s, my current version is android 2.3, how can i upgrade to android 4.0?

One way of doing it manually is below
Guide to create your own generic .ftf firmware file for your country
The Flashtool link in that guide is old so use the new one here
Follow this guide to manually flash but use the .ftf you created above and not the one listed - Everything else is the same for all Xperia devices
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Similar Messages

Xperia arc s adb not working after upgrade to ICS

Hi,
I have used my Xperia arc s for android development (using eclipse) for a long time without any problems. Then I decided to upgrade my arc to ICS (4.0.4). I installed PC Companion and upgraded with the official software from sony. After the upgrade I can not connect to my arc from eclipse anymore. The device manager in Windows Vista shows a warning on "Sony Ericsson sa0102 ADB Interface Driver" and "Device status: This device cannot start. (Code 10)". This is shown in the device manager before I even connect my arc using USB cable.
I think the problem occured either when I installed PC Companion, or when I upgraded the phone. I have tried to uninstall PC Companion and reinstall the adb device driver with no luck.

Since I'm not fully into these kind of issues I'd recommend you to check over at the developer site to be able to get hold of more info.
Check the link below!
http://developer.sonymobile.com/
What do you think about this forum? Let us know by doing this short survey.

Sony Xperia system upgrade causes BT email issue

My Sony Xperia mobile phone has just had a system upgrade and now my BT emails are coming up corrupted on it. I contacted my phone provider who tells me BT has changed their popbox codes and I need to go on to my account and enable it for mobile devices. I have had a look with no luck. Any suggestions please.

I have had this exact experience with my Sony Xperia M2 Aqua phone after downloading new system software about 2 weeks ago. My husband and I have the same type of phones and share the same email account. Fortunately he did not update his phone with the latest Sony software. He still has the previous version on his phone and he has had no problems at all.
I have had little joy with Sony other than to ask me to send them screenshots of the problem, to take off and reload my btinternet email account, and to use PC Companion to repair/reload the software. I have done all they ask but to no avail as problem is still the same after doing everything they suggest. They are extremely loathe to accept that the problem stemmed from their software update but are now referring it to a technical department to investigate. Sony say that I can't revert to previous version either as a solution as they can't downgrade a phone again after upgrade had been installed.
I would welcome any suggestions or advice to fix the problem if anyone can help.

Custom Phone theme Xperia arc S?

Is there a way to change the theme of Xperia Arc S running on ICS without using a custom launcher?
Solved!
Go to Solution.

1.)long press the homescreen > themes > select the theme you want.
2.) root , void your warranty , change system files and you can set any theme you want.
3.) download a custom launcher.
only 3 options.

Xperia Arc S wifi problems

After upgradeing to Android 4.0 i cant connect to my WI-FI (WPA2-PSK). I can see my network, the phones states it gets an IP address and then just right after it goes into somekind of a loop : approves my logon, gets the IP ... then get throwed off and starting all over again. Before trying to logon to the network, it states that the signal is strong, but when in the so called loop, the phone suddenly claims that the signal is bad ?!?!
- Before the upgrade to Android 4.0, i had no problem whatsoever connecting to my WIFI.
- Our peripherals in our household, including my wifes XPeria Arc S, which not have been upgradded, hav no problems connecting to our WIFI.
- I have done a "reset to factory setting" without any luck
- Also rebooted my Router, which has the latest firmware (Hawking HWR-54)
Any ideas??
/Mads Sabroe

any one got problem solution..??
Ammar wrote:
I have a similar problem since updating my Arc S to ISC.
My WiFi can no longer connect ot my Intellinet Access Point regardless how many times I changed the Access Point encryption, SSID, password, channel, etc.
The interesting thing is that when I switched to a N capable Access Point it connected straight away!
Couple of days ago I used Sony's Software Update Manager to upgrade to the latest LT18i_4.1.B.0.587 and I can attest that is is faster and snappier, but the WiFi problem still presists.
Another weird thing is that if I have ANT+ service running Before switching on my WiFi and connecting to the Access Point I'll never be able to use my WiFi unless I reboot the phone.
Now, Being a loyal Sony/Sony Ericsson/Sony user for the past 12 years I have to say that these issues must be ironed out Sony before we dump your phones and go the Samsung way or any other way.

Problems on software update - Xperia Arc

I own a Xperia Arc Lt15 and it's stuck on 2.3.4
I checked the Sony website and it says the latest software is 4.1.B.0.587 released on 8/16/2013
Is there any way to upgrade to Android 4.0?
Any help is appreciated.

Have you tried to update your phone using PC Companion or Update Service?
PC Companion:
http://www.sonymobile.com/update
Update Service:
http://www.sonymobile.com/global-en/tools/update-service/
What are your thoughts about this forum? Let us know by doing this short survey.

Smartwatch2 compatible with Xperia Arc S

I would like to know if my Xperia Arc s will be compatible with the new Smartwatch 2? My Arc S has already been upgraded to android 4.1.2. It's only the bluetooth 3.0 that is troubling me. I think that my phone has bluetooth 2.1. will it be compatible to run with SW2?

Sony Mobile has a separate community which can be found here. Also, you appear to be located in Mauritius, you may reach out to Sony Mobile in Mauritius at http://www.sonymobile.com/ for further assistance with your Xperia and SmartWatch questions. Thanks!
If my post answers your question, please mark it as "Accept as Solution"

IMac G3 350Mhz Memory & System Upgrade Killer

I was trying to upgrade (RAM and system) my children's iMac. I went from 9.1 to 10.2 (own all software). 256 chip went in first and only with 9.1. Ran fine. Next step was to put original CD (not tray) in iMac and install system upgrade.
Ran fine during requested restarts. Shut down and came back 4 hours later to run tutorial program (Total Training for Mac OS X). I could hear the 'good' mac startup sound, but the entire screen was dark...as if it were turned off.
After reading messages, I learned about 'firmware'. Should I have installed something? Doesn't the 10.2 know to install this firmware?
Need direction on how to get the children's computer running before wife does a 'Lorraina Bobbit'.
iMac Mac OS X (10.2.x)

After turning on the machine, wait a few minutes and then push the button on the front. Once this button has changed color, push it again and see if your display functions normally; if so, open the Startup Disk pane of System Preferences and set your Mac OS 9 system as the startup disk. Restart your machine, and then perform the instructions in sentence 1 again. From here, download and install the firmware update immediately, and then use Startup Disk 9.21 to reselect the Mac OS X system as the startup disk.
(9611)

My bank's system upgrade tells me that my Mac is a public computer. I know it's not but how do I find out for sure?

I purchased myMac for private, personal use. However, my bank's system upgrade says my Mac is a public computer and as such will now allow me to access any of my account information. The passcode that the bank gave to me will not work with a public computer. How can I make sure that my computer is still a private computer and not a public one? If it has become public, since the bank system upgrade, how dp I get it back to being a private computer for my use only? HELP PLEASE!

When most bank sites ask whether or not your computer is public or private, it is usually for you to understand that if you are on a public computer...like a library...to not have the computer remember your personal password and also to remind you to log out. If you are the only one that uses this computer, it is private.

What's the best system upgrade for 'older' Mac Mini?

My MacMini is about five years old:
Model Name:    Mac mini
Model Identifier:    Macmini4,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.4 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    3 MB
Memory:    2 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    MM41.0042.B00
SMC Version (system):    1.65f2
This mini is still running System 10.6.8, with the 'latest' version of Safari being version 5.1.10.
Lately, Safari fails to perform certain features correctly on certain websites, and I have to switch to Firefox to make the websites work.
Is it time for a system upgrade, so I can run a newer version of Safari? If so, which newer OSX system version would be the best for me to upgrade to?

A few other things to consider if you want to upgrade your OS.
If you are using any apps that are still PowerPC apps, they will not run on
any newer Mac OS. So you will need to find replacements ($$$$).
Also, in terms of apps, you need to make sure the apps you are currently
using are compatible with the newer MacOS. You may need to upgrade ($$$$)
or find alternatives.
Also, you will need to make sure any external hardware that you use with
your Mac is also compatible with the newer MacOS. You may simply need to
update drivers or the hardware may no longer be supported ($$$$).
So, upgrading your MacOS could end up costing more than just adding RAM!!!

[SOLVED] Xorg terminates after system upgrade

Im lost... Please someone help me.
I upgraded old installation of Arch yesterday (about one year old) and now Xorg fails to load up. I don't really know where to look for issues... I think its graphic card but I'm not sure...
Xorg isnt showing much errors...
# cat /var/log/Xorg.0.log | grep EE
[ 3948.803] Current Operating System: Linux bowman 3.13.6-1-ARCH #1 SMP PREEMPT Fri Mar 7 22:30:23 CET 2014 i686
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3949.345] Initializing built-in extension MIT-SCREEN-SAVER
[ 3951.026] (EE) Server terminated successfully (0). Closing log file.
Warnings:
# cat /var/log/Xorg.0.log | grep WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4198.590] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4198.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4198.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4198.590] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 4198.590] (WW) Disabling Keyboard0
[ 4198.590] (WW) Disabling Mouse0
[ 4199.631] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 4199.632] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 4199.940] (WW) evdev: SIGMACHIP USB Keyboard: ignoring absolute axes.
Log part related to "Unable to support custom viewPortOut" line:
[ 4199.226] (**) NVIDIA(0): Enabling 2D acceleration
[ 4199.626] (II) NVIDIA(GPU-0): Display (LG Electronics W1946 (CRT-1)) does not support NVIDIA
[ 4199.626] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 4199.628] (II) NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:1:0:0 (GPU-0)
[ 4199.628] (--) NVIDIA(0): Memory: 524288 kBytes
[ 4199.628] (--) NVIDIA(0): VideoBIOS: 05.44.a2.14.ff
[ 4199.628] (II) NVIDIA(0): Detected AGP rate: 8X
[ 4199.628] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 4199.628] (--) NVIDIA(0): Valid display device(s) on GeForce 6200 at PCI:1:0:0
[ 4199.628] (--) NVIDIA(0): CRT-0
[ 4199.628] (--) NVIDIA(0): LG Electronics W1946 (CRT-1) (connected)
[ 4199.628] (--) NVIDIA(0): DFP-0
[ 4199.628] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 4199.628] (--) NVIDIA(0): LG Electronics W1946 (CRT-1): 400.0 MHz maximum pixel clock
[ 4199.628] (--) NVIDIA(0): DFP-0: 155.0 MHz maximum pixel clock
[ 4199.628] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 4199.628] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 4199.628] (**) NVIDIA(0): device LG Electronics W1946 (CRT-1) (Using EDID
[ 4199.628] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 4199.629] (==) NVIDIA(0):
[ 4199.629] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 4199.629] (==) NVIDIA(0): will be used as the requested mode.
[ 4199.629] (==) NVIDIA(0):
[ 4199.629] (II) NVIDIA(0): Validated MetaModes:
[ 4199.629] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 4199.629] (**) NVIDIA(0): Virtual screen size configured to be 1360 x 768
[ 4199.631] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 4199.632] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 4199.633] (--) NVIDIA(0): DPI set to (84, 84); computed from "UseEdidDpi" X config
[ 4199.633] (--) NVIDIA(0): option
[ 4199.633] (--) Depth 24 pixmap format is 32 bpp
[ 4199.646] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
Xorg.0.log: http://pastebin.com/rJDxeXnV
Graphic card is: (lspci -v)
01:00.0 VGA compatible controller: NVIDIA Corporation NV44A [GeForce 6200] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device 3504
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 16
Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fa000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
Packages installed:
# pacman -Qs nvidia -q
libcl
libvdpau
nvidia-304xx
nvidia-304xx-libgl
nvidia-304xx-utils
opencl-nvidia-304xx
xorg.conf has been automatically generated with nvidia-xconfig:
(only " Virtual 1360 768" has been added)
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.119 (buildmeister@swio-display-x64-rhel04-01) Fri Jan 17 10:35:08 PST 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Virtual 1360 768
EndSubSection
EndSection
Any ideas?
[EDIT]
Very important facts:
startx fails when running xfce4 or awesome
startx runs on root (with strange x environment) with no problems
Last edited by marzecki (2014-03-12 13:52:49)

For me it occurred after this update..... I dunno why , but openbox wouldn't load, kde would, however
Guess it's due to the mesa update and using the legacy nvida-173xx driver
[2014-03-12 21:17] [PACMAN] Running 'pacman -Syu'
[2014-03-12 21:17] [PACMAN] synchronizing package lists
[2014-03-12 21:17] [PACMAN] starting full system upgrade
[2014-03-12 21:24] [PACMAN] upgraded bluez-libs (5.15-1 -> 5.16-1)
[2014-03-12 21:24] [PACMAN] upgraded calligra-filters (2.8.0-1 -> 2.8.0-2)
[2014-03-12 21:24] [PACMAN] upgraded calligra-libs (2.8.0-1 -> 2.8.0-2)
[2014-03-12 21:24] [PACMAN] upgraded calligra-plugins (2.8.0-1 -> 2.8.0-2)
[2014-03-12 21:25] [PACMAN] upgraded calligra-krita (2.8.0-1 -> 2.8.0-2)
[2014-03-12 21:25] [PACMAN] upgraded libpng (1.6.9-1 -> 1.6.10-1)
[2014-03-12 21:25] [PACMAN] upgraded mjpegtools (2.0.0-4 -> 2.1.0-1)
[2014-03-12 21:25] [PACMAN] upgraded cinelerra-cv (1:2.2-19 -> 1:2.2-20)
[2014-03-12 21:25] [PACMAN] upgraded systemd (210-2 -> 210-3)
[2014-03-12 21:25] [PACMAN] upgraded mesa (10.0.3-1 -> 10.1.0-2)
[2014-03-12 21:25] [PACMAN] upgraded libevdev (0.6-1 -> 1.0.1-1)
[2014-03-12 21:25] [PACMAN] upgraded clutter (1.16.4-1 -> 1.16.4-3)
[2014-03-12 21:25] [PACMAN] upgraded libcups (1.7.1-3 -> 1.7.1-4)
[2014-03-12 21:25] [PACMAN] upgraded cups-filters (1.0.46-1 -> 1.0.48-1)
[2014-03-12 21:25] [PACMAN] upgraded cups (1.7.1-3 -> 1.7.1-4)
[2014-03-12 21:25] [PACMAN] upgraded dhcpcd (6.2.1-1 -> 6.3.1-1)
[2014-03-12 21:25] [PACMAN] upgraded dosfstools (3.0.25-1 -> 3.0.26-1)
[2014-03-12 21:25] [PACMAN] upgraded freetype2 (2.5.2-1 -> 2.5.3-1)
[2014-03-12 21:25] [PACMAN] upgraded geoip-database (20140108-1 -> 20140304-1)
[2014-03-12 21:25] [PACMAN] upgraded gst-plugins-bad (1.2.3-1 -> 1.2.3-2)
[2014-03-12 21:25] [PACMAN] upgraded gstreamer0.10-bad (0.10.23-7 -> 0.10.23-8)
[2014-03-12 21:25] [PACMAN] upgraded gstreamer0.10-bad-plugins (0.10.23-7 -> 0.10.23-8)
[2014-03-12 21:26] [PACMAN] upgraded kdenlive (0.9.6-3 -> 0.9.6-4)
[2014-03-12 21:26] [PACMAN] upgraded keyutils (1.5.8-1 -> 1.5.9-1)
[2014-03-12 21:26] [PACMAN] upgraded libnl (3.2.23-1 -> 3.2.24-1)
[2014-03-12 21:26] [PACMAN] upgraded libssh (0.5.5-2 -> 0.5.5-3)
[2014-03-12 21:26] [PACMAN] upgraded libva (1.2.1-1 -> 1.2.1-2)
[2014-03-12 21:26] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-03-12 21:26] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ARCH
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ARCH
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:26] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-03-12 21:26] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:26] [PACMAN] upgraded linux (3.13.5-1 -> 3.13.6-1)
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'default'
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck.img
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ck
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck.img
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-ck.preset: 'fallback'
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-ck -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-ck-fallback.img -S autodetect
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Starting build: 3.13.6-1-ck
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:27] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-ck-fallback.img
[2014-03-12 21:27] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:27] [ALPM-SCRIPTLET]
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Thank you for using http://repo-ck.com/ for your linux-ck package needs.
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Note that the following CPU optimized packages are or could be available to you:
[2014-03-12 21:27] [ALPM-SCRIPTLET] AMD : barcelona, bobcat, bulldozer, kx, k10, piledriver
[2014-03-12 21:27] [ALPM-SCRIPTLET] Intel : atom, core2, haswell, ivybridge, nehalem, p4, pentm, sandybridge
[2014-03-12 21:27] [ALPM-SCRIPTLET]
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Search via group name: pacman -Sg ck-ivybridge
[2014-03-12 21:27] [ALPM-SCRIPTLET]
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> Post in the repo support thread if package group is unavailable for your architecture:
[2014-03-12 21:27] [ALPM-SCRIPTLET] >>> https://bbs.archlinux.org/viewtopic.php?id=111715
[2014-03-12 21:27] [PACMAN] upgraded linux-ck-p4 (3.13.5-2 -> 3.13.6-1)
[2014-03-12 21:27] [PACMAN] upgraded linux-headers (3.13.5-1 -> 3.13.6-1)
[2014-03-12 21:28] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-03-12 21:28] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Starting build: 3.10.33-1-lts
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-lts.img
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Starting build: 3.10.33-1-lts
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-03-12 21:28] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-lts-fallback.img
[2014-03-12 21:28] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-03-12 21:28] [PACMAN] upgraded linux-lts (3.10.32-1 -> 3.10.33-1)
[2014-03-12 21:28] [PACMAN] upgraded linux-lts-headers (3.10.32-1 -> 3.10.33-1)
[2014-03-12 21:28] [PACMAN] upgraded python (3.3.4-1 -> 3.3.5-1)
[2014-03-12 21:29] [PACMAN] upgraded mono (3.2.3-2 -> 3.2.8-1)
[2014-03-12 21:29] [PACMAN] upgraded ruby (2.1.0-2 -> 2.1.1-1)
[2014-03-12 21:29] [PACMAN] upgraded s-nail (14.6.1-1 -> 14.6.2-1)
[2014-03-12 21:29] [PACMAN] upgraded sqlite (3.8.3.1-1 -> 3.8.4.1-1)
[2014-03-12 21:29] [PACMAN] upgraded swt (4.3-1 -> 4.3.2-1)
[2014-03-12 21:29] [PACMAN] upgraded systemd-sysvcompat (210-2 -> 210-3)
[2014-03-12 21:29] [PACMAN] upgraded tzdata (2013i-1 -> 2014a-1)
[2014-03-12 21:29] [PACMAN] upgraded wine (1.7.13-1 -> 1.7.14-1)
[2014-03-12 21:29] [PACMAN] upgraded wireshark-cli (1.10.5-4 -> 1.10.6-1)
[2014-03-12 21:30] [PACMAN] upgraded wireshark-gtk (1.10.5-4 -> 1.10.6-1)
[2014-03-12 21:30] [PACMAN] upgraded xbmc (12.3-11 -> 12.3-12)
[2014-03-12 21:30] [PACMAN] upgraded xterm (302-1 -> 303-1)
Thanks a bunch
Last edited by 1LordAnubis (2014-03-13 02:39:41)

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do?

I can't connect to Wi-Fi - keeps timing out. No problem connecting from other laptops / phones. Stopped working after I did a system upgrade. What can I do? I am on OS X Yosemite.

Take each of the following steps that you haven't already tried, until the problem is resolved. Some of these steps are only possible if you have control over the wireless router.
Step 1
Turn Wi-Fi off and back on.
Step 2
Restart the router and the computer. Many problems are solved that way.
Step 3
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 4
Run the Network Diagnostics assistant.
Step 5
In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues listed in the Summary, if any.
Step 6
Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 7
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 8
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 9
Reset the System Management Controller (SMC).

[solved] After a full-system upgrade (Linux 3.15.8) = Wifi undetected

Hi, following this post, I'm seeking help concerning a big problem with my wifi.
In fact, it has been a few months since my wifi interface isn't recognized anymore. Yesterday, after a few tests, I found it was due to the kernel version, so I tried to reinstall my first ArchLinux (Linux 3.13.5-1-ARCH) : it worked, my wifi was back. The problem was that I couldn't reinstall all my stuffs : so I did a full-system upgrade (knowing I will lose my wifi) and now I just want to fix it once and for all (I'm done dealing with it).
So now, your help would be very appreciated. Does anyone have an idead? Or need more details about my config, my laptop, or whatever?
Last edited by nugetchar (2014-08-09 20:30:44)

Okay then, here we go :
When I do a
lspci
I have the following output :
[nugetchar@arch ~]$ lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [NVS 5200M] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
0c:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05)
So, as you can see, the Network Controller is the following :
03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
When I do a
ip link
this is what I obtain :
[nugetchar@arch ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether f0:1f:af:25:3b:13 brd ff:ff:ff:ff:ff:ff
6: enp0s20u2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 6e:d6:2d:5c:29:bd brd ff:ff:ff:ff:ff:ff
I started reading this page but am not sure if it is relevant due to the fact it concerns the 3.8.2B version.
Finally, a
more /etc/modprobe.d/modprobe.conf
gives me the following output :
^C[nugetchar@arch ~]$ more /etc/modprobe.d/modprobe.conf
alias floppy off
blacklist fd0
blacklist floppy
blacklist ipv6
blacklist bcma
blacklist pcspkr
blacklist snd_pcsp
I think I need to unblacklist bcma ?
@ewaller : I just saw you reply, here is the output for ls /lib/modules
[nugetchar@arch ~]$ ls /lib/modules
3.15.8-1-ARCH extramodules-3.13-ARCH extramodules-3.15-ARCH
Thank you for your answers, I really appreciate it

HT202008 I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers.

I am having issues with my Window 7 on boot camp. My hardware is Macbook Pro Mid 2010 model and working on OS X 10.9.5. Recently I went to windows 7 to do a system upgrade but failed and was told to update the bootcamp drivers. I installed boot camp5 but seem to be the wrong version and change to boot camp 4 which was updated okay. However I still cannot do the updates. Can someone advice me please? Thank you!

Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for the appropriate version of drivers related to the specific version of Windows 7.
MacBook Pro
(13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook Pro
(15-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
MacBook Pro
(17-inch, Mid 2010)
5
5
4
DVD
DVD
DVD
Be careful with Windows Updates, especially driver updates. Standard WHQL drivers can cause problems.

BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0

Background:
I am relatively new to BW team and will be going through my 1st source system upgrade.
We currently have BI 7.0 SPS 17 connected to source system R/3 Enterprise EP1.
We are upgrading to the source system to ECC 6.0.
In Development and QA Environments:
we will have access to both old (R/3 Enterpirse) and the new (ECC 6.0) source systems.
We have a opportunity to compare the BW Objects, data flow and data loading from
both source systems.
In Production, however, we will just upgrade over 3 days downtime.
One Question that comes to mind in this regard...
What sort of things, we should be checking for before and after upgrade in Dev/QA and in Prod environments and what tools are available that can help the analysis and validation process ?
Some of the suggestions that were given to me include following points.
Before Upgrade:
1 Check data, taking pre images of it for testing with post upgrade.
2. Perform proper analysis of Source system related BW objects.
- A complete listing of actively used Datasources,.. etc.
3. Make delta queues empty,
Make sure that all existing deltas are loaded into BW.The last request delta must not deliver any data and must be green in the monitor.
4. Stop Process chains from BI (remove from schedule) and collection runs from R/3 side
After Upgrade:
1 After the OLTP upgrade, refer to note 458305 and other notes that are relevant to the actual upgrade
(depending on the R/3 system release / R/3 plug-in to BI plug-in compatibility).
2. Check logical system connections. Transactions SMQS, RSMO and SM59, If no access, then we can use Program RSRFCPIN_NEW for RFC Test.
3. Check and/or Activate control parameters for data transfer. SBIW ---> General Settings --->
Maintain Control Parameters for Data Transfer
http://help.sap.com/saphelp_nw70/helpdata/EN/51/85d6cf842825469a51b9a666442339/frameset.htm
4. Check for Changes to extract structures in LBWE Customizing Cockpit
- OSS Notes 328181, 396647, 380078 and 762951
5. Check if all the required transfer structures are active. See OSS Note 324520 for mass activation.
7. Check if all Source system related BW Objects are active - Transfer rules, Communication rules, update rules,DTPs,..etc.
Below is a link for some useful programs in this regard.
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=35458
6. Test all important datasources using RSA3 and check for OLTP Datasources changes .
As soon as BW notices that the time stamp at the DataSource in the OLTP is newer than the one in the transfer structure, it requests replication of the DataSource and activation of the transfer structure. Transfer the relevant DataSources only if required, and transfer only the ones that have changed (RSA5 -> Delta).
7. Create Data flow objects (trnasfer rules, infopackages, trnasformations, DTPs) for the Replicate
new/changed datasources,if needed.
8. Check all CMOD enhancements.
If we are using a customer exit with the extractor in the OLTP, see Note 393492.
7. Check for unicode (all custom programs or Function Modules for DataSources)
5. Check all the queues in RSA7, start delta runs and test data consistency.
For delta problems:In the BW system, start the 'RSSM_OLTP_INIT_DELTA_UPDATE' program for the DataSource and the source (OLTP) system for which the init selections are then transferred from BW into the ROOSPRMSC and ROOSPRMSF tables in the source system so that the delta can continue.
9. Take back up of data posted during upgrade for contingency planing.
10. Run the entire set of process chains once if possible and let it pick up no data or the usual master data.
Since we have lot of experts in this forum, who have probably gone through such scenario many times, i wanted to request you to Please Please advise if i have stated anything incorrectly or if i am missing additional steps, OSS Notes, important details...

Thanks Rav for your detailed post and very helpful contribution by posting all the information you had regarding the upgrade.
We have similar scenario -
We are upgrading our source system from 4.7 to ECC 6.0. We have our BI system with BI 7.0 at support pack 19 (SAPKW70019).
Our strategy in ECC deployment ->
In development we copied our old DEV 4.7 system DXX to new ECC system DXY (new system ID).
In production we are going to use same system PRXX upgraded from 4.7 to ECC.
Now we are in testing phase of ECC with all interfaces like BI in Dev.
My questions are below ->
How can we change/transfer mapping of all our datasources in Dev BW system BID to new ECC dev system DXY (Eg. Logical system LOGDXY0040) from Old dev system DXX (Eg. Logical system LOGDXX0040). We donot want to create new datasources or change all transfer rules/Infosources for old BW3.x solutions on our BI.
Also in new ECC sourcesystem copy we see all datasources in Red in RSA7 transaction. Do we need to initialize again all the datasources from our BW BID system.
Is there any easy way for above scenario ?
Please let me know if you have any further helpful information during your ECC 6.0 upgrade connecting to BI 7.0 system.
I have found some other links which have some pieces of information regarding the topic -
Upgrade R/3 4.6C to ECC 6.0 already in BI 7.0
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/sap-r3-migration-and-sap-bw-version-1744205
BI 7.0: Source System upgrade from R/3 Enterprise to ECC 6.0
Re: ECC 6.0 Upgrade
Re: Impact of ECC 6.0 upgrade on BI/BW Environment.
ECC 5.0 to ECC 6.0 upgrade
Thanks
Prasanth

Xperia arc s, no system upgrade..

Similar Messages

Maybe you are looking for