Xperia e stuck at sony logo
hi....guys,actually what had happened is I updated my phone then in the last step of updation suddendly it shows an exclamatory mark( ! ) and then it switches off by itself then I again switched on my mobile then a 'sony' logo and after that an exclamatory mark this process repeats all the time ........please help me,can i do anything without going to service centers and more thing it is not connecting to pc companion,please suggest me anything guys,thank you
PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355
Similar Messages
-
Xperia is stuck on sony logo and won't continue reboot after wiping
i was currently on a mod and it keeps on freezing so i decided to revert to stock.now, when i wiped phone using recovery tool,it is stuck on SONY logo and will not continue to boot.i have also tried to go recovery but it won't.any help guys?
What if you reflash it (with flashtool)?
-
My phone can't boot ,I deleted system on clockworkmod on my phone. What can I do now. The phone is rooted but with lock bootloader. It was running gingerbread. Now pc companion can't recognised it.
Go for SUS
SUS ( Sony Update Service) ... download and install it on pc and follow the on-screen instructions http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
or
http://www.sonymobile.com/global-en/tools/update-service/
Both the links are same
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation. -
When I turn off the phone, the screen flashes with sony logo. any solution?
Hi,
when I turn off the phone, the screen flashes with sony logo. any solution?repair your phone with
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Hi there, I bought my brand new Xperia Z1 2 weeks ago, the first few days, it work perfect but some time have to restart because it keep losing mobile data, after a few day, it start to having boot loop. I tried everything that other post said like hard reset and leave it more than 30s, take out the sim card and sd card, but still, it can't start up without having boot loop. It just appear Sony logo, then Xperia, then restart, heat up and keep continue like that.
I tried to factory reset and flash a new room with SUS, work perfectly again, after 3 days, the bootloop start happen again and the mobile data keep losing. Any idea to fix this ? Thanks in advanceExact same symptoms; just after two days using my brand new Z1. Took it to the service and still waiting to hear form them for more than 10 days! In my case, when the phone rebooted, there was no background image at all; all I had was a pure black background (the widgets and all were still there and functional) and after about half a minute or so, the phone rebooted itself. If I let this go on for some time, the phone sometimes booted up normally. Funny that during the reboots, although my SIM was locked, I was never asked for a PIN.
-
hi i rescently updated my ipad 4 in ios 7.0.4 and for resell purpose i want to restore my ipad via itunes but it got stuck at apple logo and progress bar of 45% completed i tried it 50 times but it stuck on that exact point for hours i cant able to restore it and had no errors it just like freezes at one point i also uses dfu mode but got stuck at same problem using windows 7 32 bits itunes 11.3.8 ipad 4 wifi please help
My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
Once I completed both restores, the sync with iTunes worked fine. -
My iPhone 5s on ios 8.1.2 is stuck at Apple logo or recovery mode.. To fix this issue, i need to update it to ios 8.2 through itunes.. I want to ask that my data i.e. Photos and other personal data would be removed after updating it or not..?
if yes then how can i save my data or get out of recovery mode.. Is there any safe mode or something like that on which i could access my data..
P.S. I have not taken any backup of my iPhone on itunes..
Please help me sort out this issue..Recovery mode doesn't mean that all your data is already lost. You only lose your data if you restore it.
When you plug the phone is into iTunes hold down the home button. iTunes may then give you the option JUST to update the software first. This should not get rid of any data.
However, if iTunes is only giving you the option to RESTORE and update, then you will lose your data I'm afraid.
Hope that helps! -
Toshiba Satellite p75-A7200 stuck on toshiba logo after bios change
My Toshiba Satellite p75-A7200 is stuck on toshiba logo after bios change.
entered bios fine changes from UEFI to CSM boot and now i cannot enter bios or boot past toshiba logo.
Ive tried F2 tapping and holding while powering up the laptop(tried every Fkey,DEL,ESC, with and without FN key)
cannot re-enter bios.
Also i tried to run the bios update cd created multiple 1.50 1.40 even 1.00, it doesnt seem to read any media.
i tried holding C, FN+C and f and just about every key on the keyboard to get something to work. i had dvd as top of boot priority for a while now so i shouldnt have to try f12 or holding C before boot but i tried . it doesnt seem to read any media
i tried windows 8 install cd, Ubuntu, centos, nothing goes past toshiba logo and no errors, i dont get the non bootable device error so its seems to not be reading the dvd. (dvd does spin and make read noises) im trying to find my usb floppy drive to try a floppy version but it acts like its not reading any media.
I also pulled the HDD and all usb devices to make the dvd the only media available and with the HDD out it spins then toshiba logo then black screen with solid white horizontal curser on top left of screen.(only happens when hdd out)
is there some type of key combination that will force a bios update or a crisis recovery mode for bios.
I also Pulled the battery for 2 solid days(battery,cmos battery, and power supply and held power button for about 10 mins while watching tx to make sure the thing was drained before the 2 day sit with no power at all.
this happened the second i changed from UEFI to CSM boot so its not a motherboard problem or anything like that because all was well before this setting change.
I already pulled the HDD and backed it up to another drive and swapped it to elimiate that.
any ideas on a secret key combo to force a bios read from dvd or usb or anythng.
or another combo that im just missing to enter bios after CSM boot.
UPDATE
to do a crisis recovery on this laptop
1 get a usb stick and format it in fat or fat32
2 download "7zip" and install it if you dont have it.
3 download bios from toshiba website.
4 run the installer for bios but dont choose and option just close it we just want to extract the files to the location normally c:\splnvxxx where xxx is the version number like 150
5 goto the installed locaion "c:\splnv150" or whatever number.
6. find file os2014273a_150 or something similar. it will be an application, it will end in version number _150, and it will also have a disc image file of the same name. but we want the app.
7. right click on it and you should have an option 7zip then extract
once extracted there is a folder now archesxxxxxx_bios_v150_win
8 copy the bios file located in archesxxxxxblahblah/X64/BIOS.fd , BIOS.fd is the bios and just copy that to a BLANK usb thumb drive that was formatted with fat or fat32.
9. put usb into your satellite and unplug the power from it.
10 holding FN + ESC key together plug the power back in and press power button.
11. release keys FN and ESC if all is right it will have the power button and led on from blink abut every 1 second while it searches for the bios. once its done it will reboot and you should be good to go.
if it keeps cycling with the power button then the bios is named wrong or something is not right with the usb. try reformatting it again and make sure that the bios file is the ONLY thing on the drive.Ok a little research and digging into the bios exe downloaded from toshiba shows this has INSYDE BIOS witch should have a recovery process wich i prepared a usb stick with just the bios.fd on it found some post around toshiba forums with different models using win +B or Fn + F but neither of these worked for me to force bios update
anyone with this model know the key combo to force recovery -
IMac 27 OS 10.6.8 Stuck on Apple logo when trying to re-install
I own a 1st own 27 inch 2.8 Ghz Core i7 Imac, 1 TB HDD and 12 GB 1067 MHz DRR3, originaly 4 GB then added 8 GB on 10/22/2011 from OWC. I own multiple iMacs for work but this one is mostly for entertaiment and play few online games like WoW and Stracraft 2.
Been using this iMac for a couple of years and never had any issue with it untill the last 3 or 4 months. I started to notice that while while joining online games I was suddenly always the last one to load, then I was experiencing lag and very short freeze time during the game play.
I then realized that I never did upgrade my memory so I decided to order an extra 8 GB from OWC, installed the sticks in and my load time was now solved, I was no longer the last one to load and most applications was running much smoother as well.
2 or 3 weeks into it, the lag came back and the random freeze were happening more and more often to the point that I could no longer play the game. I also noticed that if I tried to do multiple file transfers at once or jump from app to app I was getting the wheel of fortune way too often. I check my hard drive and realized that it was almost full, about 900 GB out of 1 TB were in use! Did a major clean up and now the drive is down to 400 GB and 600 GB available.
The wheel of fortune just won't go away, this computer is now so slow that it is pretty much unusable...
What I have done so far to fix it:
- I ram few time Disk Utility, every single time it finds quiet a few permissions errors and repairs, I was also volume error message in read that I could not fix, it was asking be to reboot + hold C with the install CD to do the repair.
- Reboot the computer with the install DVD in hold C but I am getting stuck at the apple logo.
- Ran Disk Warrior which gave me the same error and asked to reboot with hold C, same problem I am getting stuck at the apple logo.
- Did a reboot + option, getting the volume choice, select the DVD then get stuck at apple logo.
- Did a Command + S reboot, ran a check disk with repair, told me that everything was ok.
- Back in OS X, ran Disk Utility, the volume error now gone but still getting permissions to repair each time I run a check.
- Ran a full scan with Drive Genius, 0 bad blocks found after 3 hours of scan.
- Ran all tests on TechTool Pro 6 and no error on disk nor on Memory, still find permissions issues when I check permissions.
I am still getting the wheel of fortune randomly while I am typing this post, Techtool Pro is running memory test none stop, Drive Genius is scan the hard drive and Disk Warrior is checking permissions.
I removed the extra 8 GB of memory, the Mac gets even slower and still get the random wheels when trying to do more than 1 thing at once...
Not sure what to do next? I fell like the HDD is failing but every single test is telling me the opposite, can't figure out why i can't run an install after a reboot.
Thoughts?Have you reinstalled Snow Leopard? Before doing that see the following:
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc. Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Backuplist
Carbon Copy Cloner
Data Backup
Deja Vu
iBackup
JaBack
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
As a start I would suggest using a utility like Snow Leopard (now Lion) Cache Cleaner or a similar utility such as TinkerTool System to clean all user, system, and font caches. Also:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
And, visit The XLab FAQs and read the FAQ on resolving SBBOD issues.
Yours may simply be an issue of cleaning up. You can try creating a new user account. Log into the new account. Do all these problems disappear?
The repetitive messages from Disk Utility are normal and may be safely ignored. I would be a bit concerned by the fact that you cannot successfully boot from an installer disc. -
My iphone 3g is stuck on apple logo please help
Hi my 3g is stuck on apple logo after a reset, I bought it second hand and was just removing the other persons settings, it now wont do anything, wont even recognise in itunes to restore, please help,
Try forcing it into recovery mode and restore it (seehttp://support.apple.com/kb/ht1808). It you pc still won't recognize it follow the troubleshooting steps in #5 at the bottom of this article:http://support.apple.com/kb/TS1538 under "If device not recognized in Recovery Mode".
-
Please help..
iphone 4 when power on stuck in itune logo, is it possible to do back up now? (never do back up in pc/icloud before)You could try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. If it still shows the "connect to iTunes" screen, you can't do anything than restore it using recovery mode, explained here:
iOS: Unable to update or restore
And at this point backups can't be taken anymore, sorry. -
I'm trying to install windows 8 on mac, but after partitioning and restarting, it stucks on blue logo and i waited 20 minutes but nothing happened, what can i do, please help.
I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed. -
LENOVO G50-30 stuck at lenovo logo and cant even enter bios
Hello
I yust got my lenovo G50-30 and wanted to install win 7 on it. after the first BsoD I went to bios and changed the AHCI to legacy mode. Got the same BsoD. After that I changed the Os mode from win 8 to win 7 ... loaded the factory default settings and putted from AHCI to legacy mode again.
After that the laptop turns on, but it stucks at lenovo logo. I cant access the bios anymore to make any other changes. If I insert a win7 instalation disc, it start to spin but with no sucess. also cant acess the boot options anymore.
Any help greatly apreciatedI suggest removing battery and AC, holding the power button for more than 15 seconds to reset the BIOS back to default settings then see if the issue remains.
Make sure to post the results.
Good luck. -
My macbook pro 2012 mac os x lion 10.7 stuck at apple logo with spinn wheel
my macbook pro 2012 mac os x lion 10.7 stuck at apple logo with spinn whell and i held it for hours nothing happend so i tried to boot from recovery hd so i started mac and pressed option key ...so a screen appears telling recovery hd with bar for wifi connection selection then i put my wifi details and choose roc. hd it again booted with same apple logo with spin wheel...what to do now ....i haven't tried reseeting pvram..etc nvram..
Hi there lakra,
You may find the troubleshooting steps in the article below helpful.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
-Griff W. -
i had erased all contents and settings of my iphone 3G,it had stucked on apple logo,I found that it needed to be restored,i tried to restore but each time i try to restore,error 1015 occurs,I tried all solns in support page ?
punknotdead11 wrote:
what if my iphone isn't jailbroken/hacked?
Then you will not get error 1015, the error will be some other number.
http://support.apple.com/kb/TS3694#1015
Maybe you are looking for
-
Receiving Services as Materials in order not to perform goods receipt
I am on a project that is implementing SRM in May. The company has decided to upload 15 Vendors for Services and to perform the goods receipts in order to achieve a 3 way match. One of the Vendors (Huge Spend) will not get a goods receipt performed a
-
I have a Coby Kyros mid7024 and cannot download Adobe Reader.
Apparently Coby has gone out of business and has not satisfyed the licencing agreement for the Coby Kyros mid7024. Trying to download Adobe Reader from several sites, while signed in, has given the statement "not a supported device". How do I load th
-
Auditors and PO Approval Limits
We are in process of an internal audit. One of the advance questions is regarding PO/PR approval limits in Oracle. The auditors have requested an Oracle Report detailing the Buyers Approval limits. I have not found a standard report. Would some one b
-
SCSM 2012 R2 workflows and connectors are not triggered
Hi All, Suddenly in my SCSM 2012 R2 Production environment , the connectors stopped synchronising at the schedule time and the Service request was in New state for very long time (stuck in New state). When I started troubleshooting , I saw the workfl
-
I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen . tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?