Xperia Home 8.0.A.1.2 - when

when will be new xperia home 8.0.A.1.2 available and pushed to other devices e.g. xperia z3? xperia z got it, m4 aqua too, why now newer phones?
:loop; start "" %0; goto loop

I'm afraid i don't have any information on which devices that will get this version and when.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Xperia Home crashes too often after Lollipop update

    I recently upgraded my android on Xperia Z1 to lollipop. After a while the Xperia Home keeps on crashing whenever I turn on the phone... It was all fine when I had the Kitkat version.. Sony, please solve this... or, let me revert back tothe older version! Just annoying!

    @ugahta
    reinstall lollipop with PCC
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please he

    Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please help

    The remote app can either automatically find libraries available on a network (with home sharing available) or if you haven't got home sharing enabled, you can manually pair an itunes library with the remote app (using a number that is generated by the app and then typed into the itunes library).
    That is why I am so confused, as it seems to be the home sharing that is the problem!

  • I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

    I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling.  I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working.  I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem. 
    My network consists of 4  base stations set up in a roaming network - same network name and passwords.  I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn.  The network works pretty well since I went to a roaming set up.  Good performance, yata, yata, yata.
    However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address.  When the AEBS is set to  bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding. 
    I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS.  I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS.  In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding.  However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode. 
    I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope.  What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
    I'd appreciate any insight into this that anyone might have.  I've hit the wall with what I know.
    Thanks.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • I can't access my dial pad to make calls.   The last few days when I go to the phone a pop up appears that says "unfortunatly contacts has stopped working" after pressing ok to remove the pop up, it goes back to the home screen.  This also happens when I

    The last several days I have not been able to access the dial pad.  When I go to phone a pop up appears that says "unfortunatly contacts has stopped working."  To remove the pop up you have to hit 'ok', the it goes back to the home screen.  This also happens when I go to contacts. 

    You migh give resetting your NVRAM a try:
    http://support.apple.com/kb/ht1379

  • How do I set the blank tab (+) to go to my home page instead of blank page when opend?

    How do I set the blank tab (+) to go to my home page instead of blank page when opened?

    You can do that by using an add-on such as [https://addons.mozilla.org/firefox/addon/2221/ NewTabURL] or [https://addons.mozilla.org/firefox/addon/777/ New Tab Homepage].

  • I have my home page set to google. When I open a new tab I want it to also open as google instead of tabbed browsing. Would you please email me how to do this, please? Thank you!

    '''''
    I have my home page set to Google. When I open a new tab I want it to also open as Google instead of tabbed browsing. Would you please email me how to do this, please? Thank you!'''''
    Kind regards,
    Ronny T. Gallichio

    You can look at one of these extensions:
    * NewTabURL : https://addons.mozilla.org/firefox/addon/2221
    * New Tab Homepage : https://addons.mozilla.org/firefox/addon/777

  • Unread counter for whatsapp in xperia home?

    Why xperia home dont count whatsapp/viber/kakao and the other.. Samsung home count them

    This is a function provided by the application, not the home screen sorry. For this to appear the application in question would need to be programmed to do so in which case you would be best to speak with the developer of the application in question.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Error Message: Unfortunately Xperia Home has stopped working

    I have had my Z3 for nearly 3 weeks now and until this morning all was working well - loved the phone! 
    2 things happened this morning (may be connected).
    On first trying to use the phone (from it being asleep overnight) the screen froze and it would do nothing.  I left it a few minutes (so it went back to sleep again) and all appeared then to be fine.  I did a restart.
    A little later (no more than 90mins) I found the phone to be showing an error message - Unfortunately Xperia Home has stopped working - (OK).   On clicking OK, message appeared again, and again and again. I tried rebooting the phone and hoped this would clear the error. It didn't.  I was, however, by a very round about route able to get on-line. 
    Swipe down to quick settings
    Settings
    Change home screen to simple
    Error message still came up but would go once I clicked OK. I managed to get online and did a search for the error - found this thread:
    http://talk.sonymobile.com/t5/Xperia-J/Unfortunately-Xperia-Home-has-stopped-Working/td-p/720607 
    I had a system update that had downloaded and was ready to install, so before trying to clear all the data on xperia home (as suggested in the thread - Apps - All - Xperia Home - clear data) I ran the update.  This didn't clear the error - Xperia home has stopped working. 
    So, I followed the instructions on the thread above ie, all apps, xperia home, clear data. (It doesn't actually clear all the data, your accounts, passwords etc are all left intact. However, it does clear your home screens of all settings and personalisation (although it didn't change my background).  
    Touch wood, the phone now seems to be OK (having reset my home screens.
    Having been an xperia user for a number of years (I loved my Z and had no problems with it and actually delayed upgrading) I am extremely disappointed that this flagship phone should start giving error messages such as this, particularly after only 3 weeks of use.  I only hope that this is the last time I see this message!
    At least am tech savvy enough to have been able to circumvent the error, get online, find a solution quickly and sort the problem out - all done in the space of 40mins on the way to work!!   
    Has anyone else had this problem?
    Does Sony have any answers as to why this has occurred?
    Hope this all makes sense!!

    Repair your phone with SUS 
    Update Service (SUS)
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Is it possible that the home button can show a light when a message or a phone call has beebn missed?!

    Is it possible that the home button can show a light when a message or a phone call has beebn missed?!

    No.
    There is no light there.

  • Xperia Z! produces a hissing sound when it vibrates

    Hello,
    My xperia z1 produces a strage hissing sound when it virates. I have tried running the diagnostics also, but to no avail. Can you please tell me the soultion for this problem?
    Thanks

    i think the suatable thig is bring it to sony service center.before that contcat them
    http://www.sonymobile.com/global-en/support/contact-us/
    Do not forget to give kudosand to select the correct answer 

  • HT4352 I cannot get any sound on my iPad when home sharing, yet do have sound when playing iTunes that I have loaded, please help?

    I cannot get any sound on my iPad when using the remote app for home sharing, yet do have sound when I play iTunes that I have loaded on my iPad, please help?

    You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • Hi.. i bought an ipad from frys store last week. but when i use it, the home button has some strange sound when i push it. if i want to exchange at apple store, it could be

    hi.. i bought an ipad from frys store last week. but when i use it, the home button has some strange sound when i push it. if i want to exchange at apple store, it could be

    Does Target accept returns from something you bought at Wal-Mart?
    Bring it back to Fry's.

  • Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

    Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

    I've been struggling with a similar issue myself and just figured it out.  Some of my content had been purchased with an older Apple ID that I don't use any more.  When I authorized my second computer, I only authorized it for my new Apple ID, not my old one.  When I tried to copy my library to the new computer, many songs, apps, etc. reported the error "could not be copied because this computer is not authorized".  It drove me crazy because I knew the computer was authorized and much of my library came over just fine.
    Finally I selected some of the problem items, selected "Get Info" from the menus, and saw that they were all purchased by my old Apple ID.  I then authorized my old Apple ID on my new computer, and all of my files are copying correctly now.
    Would be great if the message said something like "...because this computer is not authorized for Apple ID [email protected]"

  • TS2972 My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user.  Home Sharing is turned ON.  How do I fix this problem?

    My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user.  Home Sharing is turned ON.  How do I fix this problem?

    You'll have to contact the developer about this. Apple doesn't make this app;

Maybe you are looking for

  • Cross join of dimensions

    Hi, For example:  two dimension tables and one fact table. dim1: branch branch1 branch2 dim2: time day1 day2 fact: sales branch1, day2, 100 what I want in answers when using branch and time and sales without any filters: Branch1, day1, 0 branch1, day

  • Why is iPhone Other Category Taking up Half my Phone's Storage?

    I have restored my 16 GB iPhone 4S twice, once from iTunes and once from iCloud. I can't get the 8.9 GB of the Other category to go down. The Other category is only a tiny sliver on my iPad. I've read many posts on this problem but have not found a s

  • PSE5 Not saving in version sets

    How do I get edits to save in version sets with the original (RAW) file.  I am using PSE5 on a Windows PC.  This used to work fined but not since reinstallion.  I have 800+ RAW files to work on and want to use version sets as I used to but whatever I

  • Opening new email window when email link is clicked

    Hi, I have a requirement where there will be a email id displayed on view. This email id should have a hyperlink and click on which, should open a new mail window of MS Outlook with the same email id in 'TO' section. Any idea how to achieve this? Ple

  • Permissions problems with multiple discs in Mac Pro

    Hi. I have three discs in my Mac Pro. One is the boot drive, which is an SSD, another is a 2TB Seagate and the other is a smaller spare for setting stuff aside. The SSD and 2TB drives are NOT a fusion drive. They work okay but there are problems with