Xperia Ion doesn't run after update

i updated my Xperia ion correctly. I do all step's as said in manual and on screen. After i removed usb cable, phon restarted and on display only stay logo of SONY. I wait for 2 hour's but nothing happened. What is the problem ?
Every problem have a solution, sometime's fast sometime's slow.
Solved!
Go to Solution.

Disconnect the phone from the PC, turn it off and start the below process as this will allow you to reinstall the firmware with the phone powered off during the process:
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

HT3810 I am running snow leopard 10.6.1 on my mac, why doesn't running "software update" offer to load 10.6.8?

I am running snow leopard 10.6.1 on my mac, why doesn't running "software update" offer to load 10.6.8?

Please take a screenshot of the following:
Go to the Apple menu which appears in the upper left of the screen, then click About this Mac. Screenshot the window that pops up.
Also under the Apple menu, run Software Update. After it checks for updates, screenshot the window of available updates.

ITunes wont run after update today says missing file msvcr80.dll

iTunes wont run after update today says missing file msvcr80.dll
tried to reinstall, nothing changed.

Check out the user tip below.
https://discussions.apple.com/docs/DOC-6562

My E-Mail Accounts Pop3 doesn´t work after update Lion

My E-Mail Accounts Pop3 doesn´t work after update Lion.

Same here,and Apple support did not have a solution!!

FF doesn't start after update to version 27.0.1

FF doesn't start after update to version 27.0.1
Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

Firefox 27.0.1 is too new for me to know what unique issues it might have. I will message you a link to download the installer for Firefox 27.0 to see whether that reverses the problem.

ZawgyiOne Font doesn't work after updating to iOS 7.1, please advice

ZawgyiOne Font doesn't work after updating to iOS 7.1, please advice

hi Mr.Sianpu
nice to know you, my name Kiemtheng from Cambodia, i got a problem with Khmer Unicode font at my ipad which i just update from IOS 7.0.1 to ISO 7.1.1 , It not support with Khmer font which used to appear at the old version , the problem happen as the same Lian Tuang Question, and can you tell me how to fix this problem , hope to hear a good new from your, for khmer unicode font which support with Nokora and Battombong
http://adkhmer.com/app/iphone/font_khmer_ios7_no_jailbreak/Nokora.mobileconfig
https://docs.google.com/file/d/0B8798SqaxK-JS1B5T3hjNkJPQUE/edit?pli=1
thanks

Xorg doesn't start after update

After updating this day (my system was last updated at the beginning of July
this year) I have some problem with Xorg. The server just doesn't start, and
the screen is black. I can get back to the console with Alt-F1.
Here's my Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux Data 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 5 18:54:03 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "LCD Display"
(**) | |-->Device "SiS"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 31 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:01:0: chip 1039,0018 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 1039,0900 card 1043,1455 rev 82 class 02,00,00 hdr 00
(II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:01:4: chip 1039,7018 card 1039,7018 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:01:6: chip 1039,7013 card 1043,1456 rev a0 class 07,03,00 hdr 00
(II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1180,0476 card 1000,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 1180,0476 card 1800,0000 rev 80 class 06,07,00 hdr 82
(II) PCI: 01:00:0: chip 1039,6300 card 1043,1452 rev 31 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd1800000 - 0xd1ffffff (0x800000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7efffff (0xff00000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[1] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x24000000 - 0x27ffffff (0x4000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x20000000 - 0x23ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 6: bridge is at (0:10:1), (0,6,9), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
[1] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0x2c000000 - 0x2fffffff (0x4000000) MX[b]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x28000000 - 0x2bffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter rev 49, Mem @ 0xd8000000/27, 0xd1800000/17, I/O @ 0xa800/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd4000000 from 0xd7ffffff to 0xd3ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
[5] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
[6] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
[7] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
[8] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
[9] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[13] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[17] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[18] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 0.9.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
Backtrace:
And here's what the server writes out:
Backtrace:
Inconsistency detected by ld.so: dl-open.c: 260: dl_open_worker: \
Assertion `_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT' failed!
waiting for X server to begin accepting connections
giving up.
xinit: Connection reset by peer (errno 104): unable to connect to X server
xinit: No such process (errno 3): Server error.
Any ideas? Because I have no idea, what is happening.
Edit (08.08.2008): All right, don't bother answering this question anymore. The problem is no longer important. This topic can be closed, since it won't be solved.
(I think it was caused by some error during copying files while updating my system.)
Last edited by TPJ (2008-08-08 08:42:13)

sand_man wrote:Is /tmp full?
Damn you're right. The pacman cache filled the disk...
Problem solved - thanks!
Only question left is:What are the correct permissions for /tmp since I'd like to set them back to default.
Last edited by Isildur (2009-08-16 14:22:23)

Itunes is not running after update

why itunes doesn't work properly after update? when i tried to open it some error has occured and no possibilty to run the program.
can you help me please?
thx in advance.

Try playing tracks in Quicktime. iTunes requires Quicktime and won't work if Quicktime doesn’t.
If Quicktime doesn't work, try uninstalling it using the following method, but just do the Quicktime bits
http://docs.info.apple.com/article.html?artnum=93698
Then download and install the sand alone Quicktime, option 2 here:
http://www.apple.com/quicktime/download/win.html
If Quicktime is OK try working through This article on launch problems:
http://docs.info.apple.com/article.html?artnum=302856
Also see this if iTunes won't open after an upgrade but shows in task manager:
http://docs.info.apple.com/article.html?artnum=302386

Mail doesn't launch after update 10.5.7 - Bis

Same problem as
http://discussions.apple.com/thread.jspa?threadID=2007512&tstart=0
but no solution explained there.
Here the problem:
After updating to 10.5.7 everything works fine - except Mail. The dock icon bounces one or two times and then stops. There is no error message, no beach ball and the blue dot below the icon doesn't appear either. Before the update Mail worked perfectly fine.
I run Terminal and typed
/Applications/Mail.app/Contents/MacOS/Mail
and got his error :
Unable to load nib file: MailViewer, exiting"
MagicPenguin 24 had exactly the same problem, and solved it ! see :
http://discussions.apple.com/thread.jspa?threadID=2007512&tstart=0
But he doesn't say how he solved it !!
I tried the combo update, repair permissions and remove caches. Didn't help...
Any ideas ?
Luc.

Luc,
Your test with the New User Account seems to indicate that Mail app is flawed, somehow. Please confirm that the Mail application is properly in the root level of the Applications folder, and has never been renamed. Use Get Info and report the version of the Mail app in the Applications folder -- should be Mail 3.6 (if Mail were open it would be Mail 3.6 (935/935.3) using About Mail).
Use Spotlight to see if there is more than one copy of the Mail app on your Mac?
Ultimately, I would expect downloading the Combo Update for 10.5.7 and reinstalling it over the existing OSX would fix any problem with Mail, but the above questions should be answered and reported first.
Ernie

Touch id doesn't work after update ios 7.1 APPLE PLEASE HELP!!!

Touch id scanner dead after update 7.1. Tried remove fingerprints but cannot add new fingerprint because the touch id scanner DEAD. Tried rebooting the device and touch id scanner still doesn't work. For somehow the scanner works when the iphone is charging even it works slower than before the ios 7.1 update. APPLE PLEASE FIX THIS!!!
FYI : I am not going to try backup and restore my 5s, for the last time i bought this 5s i already tried for 2DAYS and cannot restore my old iphone 5 data to my new 5s!! I give up and lost all my DATA! Cannot find any answer from apple support. REALLY DISSAPOINTED WITH APPLE!

https://discussions.apple.com/message/25162081#25162081

Home sharing doesn't work after updating itunes to 10.6.40

Hi
Just update my itunes to 10.6.40 and ipad1/iphone4 to 5.1.
The home sharing doesn't appear after enable it and both remote app (ipad and iphone) don't work!
Now, my ipad doesn't sync thru wifi and my iphone 4 sync thru wifi even when not charging.
Please help
Regards
Pedro Silva

Thanks! I didn't realise there was a specific forum for Home Sharing... found it now and will repost there.

Firefox will not run after update (3.6 8.0) WinXP

I noticed that my mother's laptop was running Firefox 3.6 still, and offered to update. I downloaded 8.0, and ran the install. Had no issues with the install, no errors, nothing. I told it to run after the install finished, and it never came up. I tried the icon, still nothing. I downloaded Firefox 7.0, and installed it, figuring there might have been an issue with 8.0, since it just came out, nd tried it, same result. I rebooted the system, and tried again, still nothing happens, just the little hourglass for a moment, and then.. nothing. There is nothing in the task manager, no process for firefox. I tried running the profile manager and the plain program from the run under the start menu of windows with antivirus turned off, and got nothing there either.
I'm running windows XP Pro
::edit::
I was able to re-instal 3.6.24 back over top, and it works, but I would like to update it for her still, if it can be done.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Apps doesn't open after update to ios 5

Please help. After updating to iOS5, my ipad 2 will not launch any apps other than the Apple's orginal apps such as iMessage, iCalendar, mail.. etc. What should I do? Thanks.

If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
Otherwise have you tried closing all apps completely and then seeing if they work when you re-open them ? From the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Page rendering process doesn't run after validation error

I have a page rendering process (On Load - After Regions) that needs to be run for my page to be rendered properly; however, it doesn't run when the page is rendered after a validation error. In debug mode, I see the following line:
"0.05: ......do not perform process because inline validation condition found."
Is this a bug? Validations are meant to prevent execution of On Submit processes, but is there a reason to also not run rendering processes?
I need to dynamically construct some javascript and insert it somewhere after a certain item on the page. Is there a workaround?
Thanks.
Rodney

Rodney,
Let me see if I understand your question:
1. A page is rendered
2. The page is submitted
3. A validation fires and fails
4. The page is re-rendered displaying the validation error message
5. Your on-load after regions process did not fire
You want to run a process in all cases; in the standard page load case (1) and in the re-load case (4).
You can do this by creating a region of type PL/SQL. You can give the region a null template so that it will not display any values. The region can be the last one displayed on the page; so that it will be run last.
You also asked if it is a bug that the on-load after regions process did not fire; as the debug message indicates this is proper. Here is an example that illustrates why you typically don't want to perform processes when rendering a page after it was posted causing a validation to fire.
Lets take the following example:
1. create a form on the emp table; assume a salary column called "SAL"
2. create a validation that says the salary must be numeric
3. edit a row of the EMP table
4. change the employee job from clerk to manager; and enter a "X" in the salary item
5. submit the page
6. the validation will fire; page processing will stop; and the page will be re-displayed
7. the process which fetches the rows will not fire; and the page will be re-displayed; the job item will display the change from "clerk" to "manager" and salary will still contain the invalid "X" value. If the process had fired it would have replaced the values in the form.
My recommendation is that you use regions for any processing that is UI releated. I hope this helps.
Mike

Problem running after updating iTunes

I have uninstalled and re-installed iTunes multiple times, but continue to get the message: "iTunes cannot run because some of its required files are missing. Please reintall iTunes." This all began after updating iTunes.

try to reinstall again. They had a message last night that there was an error, the download wasn't available for awhile, I was able to download and reinstall this morning.
I had uninstalled all apple products and tried to install but the download had disapeared till this morning. Worked after reinstall.

Xperia Ion doesn't run after update

Similar Messages

Maybe you are looking for