XPERIA L not booting after unlocking the bootloader

guys I had tried to unlock the bootloader in my xperia L, but doing that I found that my phone is not booting up, when I restart the phone it just goes till the loading wave screen and doesn't go ahead of it, so pls someone give me the solution to this problem.....as fast as possible

yukesh wrote:
EMMA application is not sopported for sony xperia l,then say a solutionUse unofficial version of flastool to flash a firmware http://www.flashtool.net/downloads.php And to download firmware for your device use xperifirm http://forum.xda-developers.com/crossdevice-dev/sony/pc-xperifirm-xperia-firmware-downloader-t2834142 Note: how to use xperifirm and flashtool is explained in xda forum's link. 

Similar Messages

  • My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

    My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

    Try disconnecting any external devices, especially hard drives
    and try rebooting.
    If that doesn't help, then :
    If you are running Lion, boot to the Recovery HD and run a
    Repair Disk on the OSX partition.
    If Snow Leopard, boot to the installl DVD and run Repair Disk.
    Also, you may want to bookmark this:
    http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
    for future reference.  It is a pretty good explanation of the
    Mac boot process and how to identify where problems may be.

  • Macbook Pro Will Not Boot After Full Timemachine Restore

    Hope someone can help. I upgraded my HD and attempted to restore from time machine. Everything appears to have worked well and the restoration was a success according to what the computer says. However, when I go to reboot I hear the startup sound then the apple pops up on the screen followed by a kernal panic error and the black box telling me that I need to hold down the start button and restart. I've tried resetting the pram, reinstalling from TM again and a couple of other things but it won't start up. I tried doing a clean install and it worked fine then I migrated files from my TM backup and that worked fine as well. However, that's not what I'm looking for, I wanted to get the machine exactly the way it looked before the upgrade and I thought TM was supposed to do that. I've read other forums were people have done it with no problems and am completely stumped at why it is not working. If anyone can shed some light I'd appreciate it.

    I booted with the CD and after selecting the language, went to the utilities pane and used the partition feature.
    Last night in desperation, I booted back to the CD and once again told it to do a full restore from TM. This was the third time that I had done it so far. The previous two times I had gone into the partition feature and partitioned the drive first. This time I skipped that step and just told it to restore from TM. It said if it did this it would erase everything on the drive. I agreed and let it do its work. This morning it once again, as in both previous times, said it had restored from TM successfully. I told it to restart and lo and behold, it booted and everything is just as I had it on the other drive.
    Needless to say, I'm confused but happy. I just wish I knew why it would not boot after restoring the previous two times? Maybe it just wanted me to spend more money:) I tried booting today only after I had gone to frys electronics and bought a SATA to USB cable and cloning software.
    Anyway, thanks for your help and if anyone knows why it wouldn't boot, let me know. It would be good to know for the future just in case. For anyone else having this trouble, keep trying. Third time was a charm for me.

  • HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    Obviously since you have iOS 7 you're a developer.  As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum.  Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
    Thanks, and best of luck to you.
    GDG

  • Mac Mini will not boot after Security Update 2008-007

    Hello,
    A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
    Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

    Hi Arkku , and a warm welcome to the forums!
    I'd certainly give Sig's advice a try first.
    If that should fail...
    applesetupdone...
    This was Posted by: JoseAranda at September 9, 2006 3:48 AM
    "OK, restart your computer, hold down Command-s and type in the following:
    /sbin/fsck -fy Enter
    /sbin/mount -uaw Enter
    rm /var/db/.applesetupdone Enter
    # The rm command is the remove command which deletes the file.
    # Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
    reboot Enter
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
    end of posted by: JoseAranda"
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

  • Windows 8.1 Pro not booting after install of Hyper V - ASUS z87 + intel 4670K

    Hi,
    I am running windows 8.1 pro on a intel 4670K 4th Gen Haswell CPU and ASUS z87 plus motherboard. 16gb of kingston hyperx ddr1600 memory.
    I have enabled virtualisation technology in the bios.  CPU has SLAT.... or Extended Page Table, as intel likes to refer to it.
    When I install HyperV platform and management tools the computer configures and reboots
    AFter reboot it brings up the blue window image and spinning circle of dots for a while then reboots. It does the same thing again and then reboots and goings into repair mode and asks me to do a system restore. It then restores to before they HyperV install.
    I've tried turning off xHCI mode (i.e USB 3.0) in the bios as this seemed to be a known issue with some gigabyte boards. This did not rectify the issue
    Updated to latest asus mainboard bios 1405.  Same issue still occurs upon install of hyper V.
    Automatic repair does not work and I have to restore from system restore point.
    I performed a clean boot after installing the feature and it still couldnt boot to windows.. it just sits at windows logo and then restarts a few times and then launches the startup repair. Once the startup repair begins, the only way I can get into windows
    is restoring to a system restore point from before the hyperv feature install.
    Please see the following logs which may have further information:
    CBS Log 
    https://skydrive.live.com/redir?resid=1F523A0B8734322C!685&authkey=!AGMjUfosLFpzYNI
    Setuperr
    https://skydrive.live.com/redir?resid=1F523A0B8734322C!682&authkey=!AKS8Jb1S6W2IAH8
    Windows update
    https://skydrive.live.com/redir?resid=1F523A0B8734322C!683&authkey=!AJdWKuKj4negBoQ
    Windowsupdate(1)
    https://skydrive.live.com/redir?resid=1F523A0B8734322C!684&authkey=!APplVjuLpNZW_AY
    I logged a job with asus support and their response was:
    "Clear CMOS and ensure virtualisation technology is turned on in BIOS. If it still doesn't work, seek assistance from Microsoft"
    Previously asked this question but took a while to get back to update with the logs and it was listed as Answered.
    This issue is still existing and I'd appreciating any assistance. 
    Simon

    Hi Simon,
    Thank you for uploading the Log files.
    According to the log files, no actuate clue can be found. 
    So, I suggest you upload the dump file so that we can help you analyze them.
    Automatic Memory Dump Settings on Windows 8:
    http://www.thewindowsclub.com/automatic-memory-dump-settings-windows-8
    It also applies to windows 8.1.
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Note: I highly recommend you use SkyDrive to upload collected files and to post screen shots/pictures. Although you might not be used to it, SkyDrive features a lot of free advanced functionality around file storage capacity, sharing,
    privacy, and collaboration:
    http://skydrive.com
    Regards,
    Kelvin hsu
    TechNet Community Support

  • Macbook Will Not Boot After Updating Leopard

    I just reinstalled Leopard after having some trouble with my partition tables, and everything ran smoothly and worked fine. After the install I let software update update everything including the 10.5.5 update. It prompted me to reboot, and when I did it got to the grey Apple screen and the thing spun for about 30 seconds before it restarted and did it again. This happened a few times and then I booted from a Leopard disk to look at disk permissions and they seem to be fine. Anyone have any idea why this is happening or how I would fix it?
    Thanks in advance, hope to get this sorted out quickly, I thought I had finally gotten my computer working fine again when I reinstalled Leopard. :P

    At start up, press 'C' to boot directly from a CD/DVD. Or, you can press 'Option' and you should get a list of bootable selections (CD/DVD, external hardrives) that you can boot from - assuming you have something that IS bootable.
    I recently had a problem and ended up reinstalling my OS (via TimeMachine). I also confirmed that you can boot from your original OSX install disk. As part of this process I also discovered I could NOT boot directly FROM the AppleCare provided TechTools Deluxe disk. Supposedly you can boot INTO that disk via a restart but that seems kind of silly to me.
    However, if you have signed up for AppleCare and go to the Apple Support web site, you can download TechTools Deluxe and it can be made bootable by burning the .dmg file via Apple Disk Utilities. I don't understand Apple logic of not making the provided AppleCare TechTools Deluxe disk bootable.

  • MacBook Pro will not boot after software update

    MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you).  MONEY, MONEY, MONEY is the name of the game.  They can cause your computer to crash and still charge you! 
    Does anyone have an answer to why my computer is showing a little gear spinning for hours?  I have tried several things with NO luck.
    Thanks-

    Run through the list of fixes here
    Step by Step to fix your Mac

  • HT3964 I have a MacBook Pro that will not boot up. The apple symbol   Read more: I have a MacBook Pro that will not boot up. The apple symbol is there and a spinning wheel continues to spin. Any options??

    I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?

    Reinstall OS X.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    OR
    Reinstall Snow Leopard without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

    After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing. 
    I have tried a "hard reset" a number of times with no success. 
    When the battery is present the white LED flashes 3 times when the power button is pressed. 
    Please please help. 

    Hello Cuffy,
    Welcome to the HP Forums!
    I understand you notebook will not boot after a series of Windows updates.
    Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
    If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
    You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
    You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
    Hopefully this information helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Not Booting after recent Security Patch/Java update

    My wife has experienced what many have experienced with the recent update.
    MacBook not booting after update (i.e. - "I have no name!")
    I have tried everything posted on this topic since 2/13/09, but without any success. Does anyone have the fix for this yet?
    Things I have tried:
    * I can boot in safe mode (holding "Shift" while restarting)
    * I cannot boot from an install disk(s) (holding C while restarting) - I have both a black one from purchase, and two gray ones with purchase from MiniMac
    * Booting with verbose - gets stuck at same place as everyone else
    Operating in safe mode:
    * I can run DU and "repair" drive
    * I can see and access the CD/DVD
    * I cannot see drive in target drive mode (doesn't ever connect the 2 systems)
    * I downloaded the update files from apple and reinstalled them individually (via USB ext Drive) with a reboot in between
    * I attempted to update & archive, but I cannot run install CD from any systems disks (see above)
    Has anyone figured out how to fix this yet?

    Same problem than the other guy who is not mentioning the update in the title.
    Powerbook 1.67.
    System log said "No user defined computer name" and "using blah blah name" or so.
    Mac Os X report (for apple) says:
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000003900FF1C PC=0x00000000008FC020
    Latest crash info for cpu 0:
    Exception state (sv=0x4299D280)
    PC=0x008FC020; MSR=0x00009030; DAR=0x3900FF1C; DSISR=0x40000000; LR=0x008FE348; R1=0x2C47B9F0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x008FE348 0x008E0014 0x002E9A80 0x002EB94C 0x0008C248 0x00029234
    0x000233F8 0x000ABEAC 0xFF9BA29B
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x8d8000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x85a000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x87e000
    Proceeding back via exception chain:
    Exception state (sv=0x4299D280)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x43D0D000)
    PC=0x9000AF48; MSR=0x0200F030; DAR=0x0ECA77FE; DSISR=0x42000000; LR=0x9000AE9C; R1=0xBFFFD6C0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
    Exception state (sv=0x4299D280)
    PC=0x008FC020; MSR=0x00009030; DAR=0x3900FF1C; DSISR=0x40000000; LR=0x008FE348; R1=0x2C47B9F0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x008FE348 0x008E0014 0x002E9A80 0x002EB94C 0x0008C248 0x00029234
    0x000233F8 0x000ABEAC 0xFF9BA29B
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x8d8000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x85a000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x87e000
    Exception state (sv=0x43D0D000)
    PC=0x9000AF48; MSR=0x0200F030; DAR=0x0ECA77FE; DSISR=0x42000000; LR=0x9000AE9C; R1=0xBFFFD6C0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC

  • Why won't you unlock the bootloader​?

    Toshiba, why won't you put an APK in the downloads section to unlock the bootloader. Explaining that it will void the warrantee and that you will no longer be able to receive I updates from the service station OTA.

    They don't care. Never another Toshiba for me:
    1. I had a 750GB Toshiba Cavio external HD that died with minimum usage after 11 months...
    2. This tablet has annoying light bleed and is locked.
    3. I have  PORTAGE R700 laptop - Annoying fan noise !
    Will never recommend Toshiba to any one !

  • 27" iMac not booting after start up. HELP!

    After being turned off for 8 hours, iMac won't boot up fully. After being stuck on white screen with apple logo and spinning loading icon for 20 mins, I held the power buttom down but still nothing.
    Can anyone suggest steps to take?
    Cheers
    Sam

    Hi Sam,
    I agree with baltwo, If your Macintosh is behaving erratically or is not booting up all the way, you may want to try resetting the PRAM as per below;
    1) Shut down the computer.
    2) Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3) Turn on the computer.
    4) Press and hold the Command-Option-P-R keys. You must press this key combination before the grey screen appears.
    5) Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6) Release the keys.
    This resets the PRAM
    PRAM is a type of memory found in Macintosh computers that stores system settings. These settings include display settings (like screen resolution and color depth), the time zone setting, speaker volume, and the startup volume choice. The system settings that are stored in the computer's PRAM differ from Mac to Mac, but the purpose of the memory remains the same.

  • My Laptop B490 not booting after bios update

    My laptop not booting after updating bios i used windows 8 OS.
    I downloaded Bios from following link.
    Bios Download Link
    After updating bios, system restarted automaticaly, after that only power led is glowing, screen stays blank.
    Help me solve it.
    Solved!
    Go to Solution.

    hi sathish291
    Welcome to the Forums.
    Can you try the following:
    1. Power down the machine, remove the AC adapter and battery.
    2. Hold the power button for 30secs and reconnect the AC adapter only then turn the computer ON.
    If the machine still doesn't power up normally and boot into WIndows then it's likely that something went wrong (could be a bad BIOS flash or an internal component might have gone defective during or after the BIOS update). In this case, you may need to contact lenovo on how to go about getting the unit serviced.
    Support phone list
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

    I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

    What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
    Tell us what network setup you are using..
    If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

Maybe you are looking for