Xperia link software installed in my windows7 ultimate computer but application is not launching
I have installed Xperia link software in my laptop.
downloaded from your site.
I trying to launch application but its not opening or its not giving any message/ reason of launching problem.
I am using windows 7 ultimate 32 bit
I have installed Xperia link software in my laptop.
downloaded from your site.
I trying to launch application but its not opening or its not giving any message/ reason of launching problem.
I am using windows 7 ultimate 32 bit
Similar Messages
-
Hello everyone, I recently installed Windows XP in my computer but now it does not start my Ipod classic information even I just have installed Itunes. What should I do if I do not have my CD to get it from there?
Try using Firefox. Flash usually works on Firefox when it won't on Safari. I noticed that the Safari does not show the same version as Firefox does. Iwonder if that could be the problem. Safari on the left shows 10.1, Firefox show 10.3
-
I have just installed Adobe Digital Edition on my computer. I closed it and then plugged in the new Nook HD and opened the Digital Edition back up - it does NOT list the Nook in the left side so I cannot move the book to the NOok....how do I get this recognized so it works. ?
Please have a look at the similar thread, Authorizing my nook. Hope the solution mentioned in this thread solves your problem.
-
This is an old version of CS2 but my old computer died and I would like to be able to use the CS2 on my new computer. My serial number and activation number are not accepted and need an authorization code.
Thank You!This will probably help:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
I have an iMac that I am running OSX 10.8.3 on. I keep trying to install 10.8.4 but it will not install. I tried updating and installing several times and it restarts the computer but it will not install the software. My machine is about 8 months old so, it's in the newish range. HELP!
Sometimes the App Store version doesn't work correctly. In this case, install 10.8.4 with the Combo version > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
The Combo installer is the safest way to update OS X, and it allows you to update more than one computer with a single download -
Palm 4.2.1 application will not launch after re-install of software
After migrating my palm software from my old g4 to my new MacBook Pro OS 10.5.6 and having sync issues I was instructed from PALM to uninstall then repair permissions and re-install. I have done this and now the new PALM application will not launch. Can anyone help?
What SPECIFICALLY happens when you attempt to launch the Palm Desktop? What error message do you see as a result?
-
my ipod wont connect to itunes, i have re-installed itunes ...reset my ipod...re-boot my computer...basically i've done eveything i could but no joy it even shows on my computer but simply does not link in to my itunes. Please HELP !!!
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
-
want to install Indesign on my new computer but am having trouble. First bought CS2 in 2009 and upgraded to 7.5 in 2011. I have the serial numbers for both and was able to use it on my last computer. I don't use Indesign that often but there are some projects that it's good for. Where do I start?
Lchrichton123 what version of InDesign specifically are you wishing to install? You can find links to the installation files for the majority of Adobe Creative software titles at Other downloads
-
I had the geek squad from bestbuy supposedly install iphoto 11 on my mac but it is not there and when i try to download it it say the app has been download by another user on this machine. What do i need to do get get this app on my system? If they could not do it right the first time I do not have much faith in their advice.
Assuming you've done a system wide search for it including the Applications folder and it's not there......
I think you will need to address this with them - did you pay them for the application? Or was your purchase price to include it? And the question(s) to ask them:
If the app store states that it has been downloaded, ask them where it is and which Apple ID they used. (the store keeps track of Apple IDs and machine IDs on everything you download).
I have absolutely no faith in their advice; however, in this case, it's not so much technical advice, but an answer to your questions: you paid for something and it appears not to be there. -
Error message: can't install update, firefox is already running, but it is not
second request
an auto update failed a few days ago and now everytime I open FF I get an error message that says can't install update, firefox is already running, but it is not!
the parent.lock file is not open when FF is closed
in addition to this message, a box opens asking looking for a file
Help!hi
I had the same problem (update failed for normal user, update worked for administrator, but then normal user still got asked about installing the update even though it was already done).
Following the advice on http://kb.mozillazine.org/Software_update#Software_Update_not_working_properly worked for me, in particular to remove the update-related xml files.
good luck
kris -
I installed the latest version of iTunes but when I went to sync my iPod I got error message -50 and my iPod would not sync. I tried re-installing the most recent version of iTunes but this made no difference. I then tried installing an old version of iTunes but it would not install. I am furious because I bought music via iTunes store and I cannot get it to load onto my iPod. Can anyone help? Or can anyone give me a direct email address for iTunes support? I have been going round and round on Apple's stupid website and cannot find any help or an email address.
Quit iTunes, reboot your PC, restart the iPad and then try again.
Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your helpIt means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive. -
I am trying to install cs5.5 on a new computer but it will not acceot my serial number
I am trying to install cs5.5 on a new computer but it will not acceot my serial number
CatB4Adobe wrote:
3.0 was on two (old) machines no longer in use.
I take that to mean you never deactivated the 2 old machines. So you're stuck. You need to contact customer care via online Chat.
Contact Customer Care
Nancy O. -
Application manager show that Acrobat X Pro is installed on my computer but it's not
Application manager show that Acrobat X Pro is installed on my computer but it's not, what is the action to resolve this issue??
Hi Cailloux1973,
I would check to see if the uninstaller is available at
Control Panel > Programs & Features or Add Remove Programs or Mac HD > Applications > Utilities > Adobe Installers.
If you find and uninstaller run it.
If the product is not listed there you might try the Acrobat cleaner tool from here
http://labs.adobe.com/downloads/acrobatcleaner.html
-Dave -
Trying to install LR4 on a second computer but my serial number is not being accepted.
Trying to install LR4 on a second computer but my serial number is not being accepted. What to do?
there's nothing online about which i know. but you may be able to get that info from adobe support, http://helpx.adobe.com/x-productkb/global/service1.html
Maybe you are looking for
-
Assigning value to a two dimensional array
Hi, I am trying to assign value to a two dimesional array the following way. String [ ] [ ] d2D = new String [10] [ ]; for (int i = 0; i<obj.length; i++){ d2D = { "hello " + i, "here" , "we go" }; but it gives me the error "illegal start of expressio
-
I bought an external HD to deal with my increasing music collection. However, I don't t want to completely remove all my music from my computer -- I'd still like to keep some music local. What's the best way to manage the music, assuming I don't want
-
Changing Passwords Programatically
I've been having troubles, changing passwords. In the method DYNCredentialManagerSetPassword(), is where I get the error during compilation. Am I using invokeServerMethod properly or am I passing DYNCredentialManagerSetPassword() the wrong object? An
-
Advantages of connection object
Could someone explain the advantages or rather difference in passing the Connection object from a JSP to a servlet instead of creating one (and returning to the pool) in the servlet itself? Thanking you
-
Pausing SAPinst to adjust Oracle init.ora parameter
Guys, I'm doing an unicode system import and its taking too long. So I intend to adjust some of the oracle memory and other parameters as recommended the SAP notes. However, in SAPinst, from the phases of db creation, tablespace creation, r3load proc