Xperia Miro doesn't boot at all.

Bought it. Charged for 12 hours. Removed it from the charging cable.
Pressing the lock key at the top, only results at the Led indicator to blink red. No matter how many times I tried, and for how long I'm pressing it, it just blinks red and nothing else happens.
Need help fast, cause I am left without a phone and I really need it...

Please try running an update/repair:
1. Before you start you have to download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Once installed on your PC, double-click the PC Companion icon on your desktop to start the update.
Note! For some models you will be prompted to do a backup prior to the update and then restore.
3. Install and open PC Companion then select Support Zone.
4. Phone Software Update.
5. Start.
6. Repair Phone
7. Continue
8. Accept data removal
9. Next
10. Wait for prepare
11. Select Phone
12. Follow the connection steps
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Satellite P845t-107 - Linux kernel doesn't boot at all

Hi!
I recently bought my first Toshiba notebook -> Satellite P845t-107.
Sadly I have a very big problem with it: None of my emergency tools is working.
So I won't have any chance to rescue data from the HD when Windows is broken and I can't search for viruses from a clean system.
All these tools are Linux-based.
In all the years I'm already using such tools I never had such problems with all of the dozens of computers where I had to use that.
I already tried to get help in Linux forums.
They had several ideas but none of them worked. GRUB boots (because UEFI-compatible and secure boot is off).
But after I select the kernel settings to boot with, it gets stuck in a very early stage without any error message.
Obviously Toshiba makes something very very different than other computer manufacturers.
So please tell me how I can make my emergency tools make working again.
Thank you!
notting

The fact you're even getting to GRUB implies you've already unset UEFI boot but I don't make assumptions about the millions of possible LINUX boot and kernel combinations such as the one you didn't spend time describing
UBCD, Hirren and other popular booters are choking more often on the AdvancedFormat drives, most have been updated but their free open source origins results in cross conflicted and frequently unqualified "solutions" and reposts of "fixes" untested by the whatever member on someother followatyourownrisk.com server.
Whether I'm using some purposed repair disc, a LIVE booter of the latest Mint or booting an obsolete 10.x Ubu LINUX from a USB drive, I'm always accessing the AF drive after choosing CSM / "compatibility" in the CMOS UEFI and occasionally fiddling the SATA controller AHCI choices
Your observation about Toshiba uniqueness is pertinent about gaining CMOS access at boot since some models ( I still can't find an authoritative list ) ship with locked BIOS at boot until the Widows TVAP utility is first launched even if it doesn't change anything.
I've personally experienced as much by clamping a death grip onto an unboxed Satellite F12 and F2 before inserting the battery and power cord and every time access to the BIOS isn't granted until Windows is booted and TVAP launches.
Their are minor references to this requirement in the support pages fine print quickly followed with protective legal warnings that sully the overall message.

Lenovo Yoga 11 failed during the factory re-install of windows...now doesn't boot at all

Hi guys, thanks for providing this forum !!
Whilst preparing my Yoga 11 for a clean and for sale, I decided that it was a good idea to clean the PC by doing a complete 'factory settings' re-install of the Windows 8 RT software.   I started this process just before bed, and the message that said this would take several hours, so I figured it would be finished by morning.
I was met this morning with the PC in a crashed state. It was non-respondant and just sat on the Lenovo boot screen, with no activity to the progress.
I pressed the on off button for 10 seconds and hard booted the machine.   This now attempts to boot, although has obviously crashed part way during the windows re-install process.   The message I get on screen now states
'The computer restarted unexpectedly or encountered an unexpected error. WIndows installation cannot proceed. To install windows click 'OK' to restart the computer, and then restart the installation'
I can no longer boot to windows, and I just receive the message above.
I do not have an install disc...I assume the files are on a recovery partition.   Is there a boot / recovery / safe mode menu for the Yoga, that will allow me to recover this Yoga to it's factory state ??
Kind Regards
smiley.
Solved!
Go to Solution.

I think he just left the thread without sharing his information. How rude.
Until I discovered the green section with a link:
Solved! Go to Solution.
Easy to miss for a newcomer.

Nokia 6680 doesn't boot - at all

Hi,
i've got a problem with my Nokia 6680.
A week ago it started to ignore some number keys becoming unusable. I coldn't backup the data (due to lack of time), so I decided to use use another phone. I left my 6680 open with the battery.
Now, it doesn't start up. The display lights up with the Nokia logo only when i plug the phone to the charger. I changed the battery, pushed the 3*power etc combination, but nothing happen.
Any advice?

It doesn't sound good and you seem to have tried everything already. Next step is to send it to a Nokia Care Point or get a new phone.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

My macbook pro laptop has a grey screen at start up and doesn't boot up all the way

to whom this may concern, i have a macbook pro and the computer on startup has a grey screen i get the apple symbol and a status bar but as the status bar is filling it only fills 1/3 of the way and the computer shuts down i tried turning back on several times and have had no luck. what could be the problem ?

mr.edsr wrote:
Where is the SMC located and how is this done? Thank you!
Please read this link:
http://support.apple.com/en-us/HT201295
Ciao.

My 2012 MacBook Pro fell and it now makes a clicking noise and shows a grey screen on startup. I'm afraid the hard drive is damaged. Is their anyway to still back up my hard drive even if it doesn't turn on all the way?

So my late 2012 MacBook Pro was sitting on my desk when the desk collapsed. The computer fell with it and I was quite scared at the moment, but thankfully I opened it up and it worked perfectly fine again.
I was later watching a YouTube video and pressed the back button. The screen then froze, and I could not force quit safari. Then this weird clicking noise started to happen. It was coming from the right of the trackpad. That's when I decided to force shutdown the computer with the power button.
I let it sit and then decided to turn it back on. The clicking noise then came back and there was just a blank screen on the boot up. Eventually a grey folder with a question mark started flashing on the screen. That was all it did so I decided to turn it off again.
I'm going to take it into the Apple store ASAP, but I'm curious if my hard drive is damaged and if I will need a new one, which would erase everything on my Mac. So I was wondering if there is anyway to back up the hard driver even if it doesn't boot up all the way, or turn on the computer all the way.
P.S. I have never backed up my hard drive so I wouldn't know what to do.

You may have damaged the HDD which is located in that spot. I would take it in for service.

Mac mini doesn't boot

Hi,
My 2009 Mac mini doesn't boot anymore : all I get is a blank screen, I can't even chose to boot on the restoration drive.
From your experience, what do you think it could be linked with ? motherboard ? RAM ? It doesn't looke like a hard drive issue.
Thanks
Benoît

Hello! I'm having, what sounds like, the same issue. Everything was working fine, until I ran a combined update, as prompted, for 10.8.2. After the normal reboot, the computer boots to a plain, white screen with no Apple. The computer is not responding to any keyboard command at startup, be it any of the reset commands, 'C' to boot to the optical drive, or option to select the startup destination. When pressing the Caps/Num lock keys, I notice that none of the LED lights will turn on on the keyboard. The piggybacked optical mouse is not showing it's red light from the bottom either. These tested fine on my MacBook Pro, however, and have always worked with the Mac Mini. Connecting and reconnecting the devices does not help. I know how to run all of the hard disk repairs, the permission fixes, etc., but it appears as though something is stopping my USB devices from being utilized (or even powered) at startup. I work in IT, and I support Apple computers every day (point being, I do know my stuff).
I opened the case and disconnected the hard drive from the logic board, thinking a potential hard disk issue is to blame. Upon restart, I still get the BONG (chime), but the machine will still not respond to any keyboard commands. Plugging in a USB stick that was created as a Mountain Lion boot device in Disk Utility with the InstallESD.dmg doesn't yield any results (as I am unable to 'tell' the computer to boot from it). The system disc that was packaged with the Mini is in the optical drive, but the Mini won't boot to that either. I'm at a complete loss. This is a 2010 model which was purchased new in December in that year. I'm using HDMI directly to an HDTV. The cable is working, the TV is working, the optical drive works in another machine, and the hard disc makes the necessary sounds (but not anything out of the ordinary).
To reiterate, this happened IMMEDIATELY after installing the combined 10.8.2 update. I am seeing a lot of posts about this issue, but no actual solutions. The dialogue seems to die somewhere after, "Reset the PRAM."
PLEASE ADVISE

1) Sleep and Hibernate Problem, 2) Laptop sometimes doesn't boot in G560 (Intel P6200)

hello everyone,
i am using lenovo g560 laptop from past 2-3 years without any problems..
now i am having some issues with my laptop and i have some questions as well..
First,
whenever i try to wake the laptop from sleep, fan starts and all LEDs responds as well..but there is nothing on the screen..it's just shows nothing..!!
it doesn't even shows black screen..
Second,
sometimes, my laptop gets crashed (don't know if it is called crashed or what, don't know exact word to explain)
laptop shows no responce to anything...no response to touchpad..cursor doesn't move at all..
no response to keyboard..
screen just hangs there..nothing works..
fan keeps running like normal..
i had to remove battery and reboot laptop to make my laptop work..!!
Third,
well this problem is i think connected to second problem..
whenever my laptop crashes (as explained in second problem), and i reboot it. sometimes it doesn't boot..
all leds turns on, fan starts and laptop turns off !!
and when i try to boot the laptop after some time (say 15-25 mins), it boots without any problem..
please give me solution of my problems..
first i thought, the second problem is occuring due to overheating..
but i have cleaned the cooling fan and removed the dust from it..
normally temperature remains between 50-55 degre celcius..!!
is that normal?
is it the problem with lid ?
please give some solution..
you help will be much appriciated.
thanks !!

Hi srt99,
Thanks for posting and welcome to the Lenovo Community,
Am sorry to hear about the issue that and I’d like to help you with the issue that you’re facing,
And first I’d like to ask you to share with us the operating system version installed on your machine to be able to help you more.
Thanks and Best Regards,
Soha
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Kernel26 package now doesn't boot [FIXED!]

I grabbed the latest kernel pkg. didn't do lilo -v
and now it doesn't boot at all! [stop at the beggining of ..........]
well shouldnt at least boot the last one? [or automatically do lilo -v]
plz help me now
thanks

after a lot of testing and luck I was able to boot arch again [update lilo that is]
what did I do: [i did all that because lilo refuses either to write the map file, or protests about /dev/hda or /dev/discs/disc0/disc {depending if it was Slack or Arch}]
I booted with SlackWare 9.1 Rescue/Install CD {which has vfat}
and which plays without devfs [so /dev/hdb8 was my root arch]
I mounted my arch root
mount -t reiserfs /dev/hdb8 /tmp
I change the /tmp/etc/lilo.conf to:
boot=/dev/hda
vga=792
default=windows
timeout=300
lba32
prompt
image=/tmp/boot/vmlinuz26 # important change
label=arch
root=/dev/hdb8
read-only
other=/dev/hda1
label=windows
/boot [the slackware's cd's one] links to /mnt/boot so I did
mkdir /mnt/boot
and then tried to play with lilo a bit
. /tmp/sbin/lilo -C /tmp/etc/lilo.conf -m /tmp/boot/map -M /dev/hda mbr -v
with the above command I have a boot.0300
in /mnt/boot directory
so in the end I just did
cp /mnt/boot/boot.0300 /tmp/boot/
which overwrote the BAD AND UGLY AND OLD [and at last] boot.0300 with the new one [that containted info about the new kernel]
I prayed to Buddha a bit, and then reboot. I there chose arch and OMFG! i was able to boot it
a) I love LILO
b) I love Slackware
c) I love Arch [though I sumbitted some bug reports about the Rescue CD]
mostly I love the fact that I lost some hours do make it work, but now it works as before. On the other hand, I always remember myself trying for days to fix the windows, and then give up [or if i could hack it in a way that would work, then it would be giving me Blue Screens [now dark blue in win2k/xp] of DEATH]
so I must say I love the Penguin
yeahhhhhhhhh
thanks to everyone that helped.
I hope the pkger of kernel would soon add the WARNING [sumbitted bug for that too] and if anyone forgets it or wants to play [like me] then I hope for him that he reads this post, and make it work [i could work with Arch's Live CD too, not sure]
that's all baby.
another success story yeahhhhhhhhh!! :$

Macbook pro doesn't boot after iOS upgrade

Hi all,
I've upgraded my macbook pro (was requested automatically the upgrade) and after reboot to finish the installation, my macbook doesn't boot up.
Is there any way to boot it up? A kind of boot in safe mode?
I'm trying to power it up but nothing. It doesn't boot at all.
Please, can you help me with this.
Thanks
Álvaro

iOS is for iPhone, iPad not for Mac. So what upgrade are you referring to?

My macbook pro model A1226 doesn't boot up and the screen is black, ived try all reset commands with no luck, or try to go in safe mode, and nothing, please help

Help please, my macbook pro model A 1226 doesn't boot up, i hear the optical drive sound starting but no screen light or booting sound, ive'd tried all redet commands, and safe mode but no luck, can anyone give me an solution to my problem. Tnx

It looks as if there's a problem with your GPU. With a Retina machine, that would mean replacement of just about everything, except, perhaps, the flash storage drive.
Print you kernel panic when you go to your Apple Store appointment. I'm betting that it's a faulty GPU but they will be able to diagnose exactly where the problem lies.
Good luck,
Clinton

SSD in MBP 13" Retina Late 2013 doesn't work - Can't boot at all

I have a new MacBook Pro 13" Retina which works flawlessly. It has a factory installed 512 GB SSD, which also works flawlessly. Then I bought basically the same type of 512 GB SSD, 2nd hand but new, which I intended to install in another MacBook Pro Retina Late 2013.
The seller told me it is compatible with the MBP Retina Late 2013, but when installed, the known to be good MBPR doesn't boot. Not from that SSD, not from an attached USD HDD which has two perfectly bootable Mavericks partitions. When pressing the alt-Key on booting, I can however see two partitions on that SSD (Mac OS X 10.8.4 and a Recovery Partition), yet it is not booting at all, thus also doesn't allow me to inspect or treat this SSD with Disk Utility or other tools.
All I get is the grey screen with the striked through circle sign (see attached image). I've tried both, PRAM reset and SMC reset, no change.
Here comes the interesting part: Although both SSD look identical, they have slightly different model and part numbers (see attached image).
Working, factory installed SSD: Model MZ-JPUS512T/0A6. Part No. 665-1805D
Non-booting, 2nd hand SSD: Model MZ-JPUS512T/0A2. Part No. 665-1805A
Any ideas what’s going on here and how to solve this?

Excellent point! Mac OS X 10.9.1 doesn’t equal Mac OS X 10.9.1!
Back in the bad old days of Mac OS X Install DVDs, I was aware of the fact that there were different versions of the OS X Installer testing against the Mac ID to make sure that bundled versions get only installed on those Macs which the DVD came with. And the DVD where clearly labeled in that sense.
Now in the days of Internet download and installation from USB sticks, SSD and HDD, one completely forgets about this. On the other hand, with Mavericks being free, I don’t understand the need for such limitations, and not at least the recovery partition allows booting any Mac which supports Mavericks.
When you boot with the alt-Key pressed and you see at least one partition with Mac OS X 10.9.1, one just doesn’t understand why the heck the Mac doesn’t boot. Now I do. Apple would be well advised to simply add a short info line, like „This version of Mac OS X is missing components to boot this Mac. Please re-install from the AppStore using this computer“. It would take out A LOT of guesswork.
Anyhow… I booted the MBPR using the working SSD, installed Mavericks from the AppStore on the external USB HDD, switched the SSDs, booted from the external USD HDD’s now bootable 10.9.1 Recovery Partition, wiped the suspicious non-booting SSD and installed Mavericks. No further problems. (Completely forgot about the CMD-OPT-R Internet Recover Mode keg55 has mentioned…)
Thanks for the hint!

My mac is slow, crashes if iPhoto is opened, doesn't boot sometimes

Hello.
In the last time, my MacBook Pro is very slow and crashes sometimes if I open iPhoto or some other programs.
Sometimes, there comes a black display with some thin white lines and then I have to restart the computer.
Also, sometimes the mac doesn't boot right (you see only a grey display after the apple symbole).
I already repaired the system with Disk Utility and erased it to install a backup of my system.
Thank you for your help!
Best regards....
Here is the EtreCheck result:
EtreCheck version: 1.9.15 (52)
Report generated 27. September 2014 17:42:12 MESZ
Hardware Information: ?
MacBook Pro (15-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.4 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1680 x 1050
AMD Radeon HD 6770M - VRAM: 1024 MB
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 0:5:31
Disk Information: ?
APPLE SSD TS128C disk0 : (121,33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 120,47 GB (14,71 GB free) (Low!)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.15) Support
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.15) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) Support
[not loaded] com.novatelwireless.driver.3G (3.0.15) Support
[not loaded] com.novatelwireless.driver.3GData (3.0.15) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.15) Support
[not loaded] com.novatelwireless.driver.NWVBE (3.0.15) Support
[not loaded] com.novatelwireless.kext.wwan (3.0.15) Support
[not loaded] com.option.driver.OptionHS (3.31.0) Support
[not loaded] com.option.driver.OptionMSD (1.22.0) Support
[not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (1.0.7) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.3) Support
Startup Items: ?
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sierrawireless.SWoCTool.plist Support
User Launch Agents: ?
[failed] com.adobe.ARM.[...].plist Support
[failed] com.facebook.videochat.[redacted].plist Support
[failed] com.google.keystone.agent.plist Support
User Login Items: ?
MediaCentral Launcher
ChaxHelperApp
TheTube Helper
fuspredownloader
HP Scheduler
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 Support
Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
CouponPrinter-FireFox: Version: Version 1.1.5
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivXBrowserPlugin: Version: 1.4 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.2.2 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 45 Check version
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
DivX Support
Flash Player Support
Flip4Mac WMV Support
MediaCentral Support
Time Machine: ?
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 112.20 GB Disk used: 98.50 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 24
Oldest backup: ********
Last backup: *****
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 112.20 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      4% WindowServer
      1% fontd
      0% mtmd
      0% Activity Monitor
      0% ps
Top Processes by Memory: ?
242 MB Safari
106 MB com.apple.IconServicesAgent
102 MB mds_stores
102 MB WindowServer
82 MB Mail
Virtual Memory Information: ?
151 MB Free RAM
1.47 GB Active RAM
1.34 GB Inactive RAM
1.04 GB Wired RAM
554 MB Page-ins
0 B Page-outs

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

System doesn't boot kernel26beyond

Since a week or so, my system doesn't boot, unless I press <enter> and the power button a few times during the process.
Once it has booted, everything works fine, but it is highly annoying nevertheless.
it seems to have something to do with loading my hardware.
Boot freezes after these log messages:
Jul 23 12:18:49 (none) Linux version 2.6.17-beyond (root@sara) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 22 22:14:12 EST 2006
Jul 23 12:18:49 (none) BIOS-provided physical RAM map:
Jul 23 12:18:49 (none) BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jul 23 12:18:49 (none) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jul 23 12:18:49 (none) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Jul 23 12:18:49 (none) BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
Jul 23 12:18:49 (none) BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
Jul 23 12:18:49 (none) BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
Jul 23 12:18:49 (none) 0MB HIGHMEM available.
Jul 23 12:18:49 (none) 511MB LOWMEM available.
Jul 23 12:18:49 (none) On node 0 totalpages: 130880
Jul 23 12:18:49 (none) DMA zone: 4096 pages, LIFO batch:0
Jul 23 12:18:49 (none) Normal zone: 126784 pages, LIFO batch:31
Jul 23 12:18:49 (none) DMI 2.3 present.
Jul 23 12:18:49 (none) ACPI: RSDP (v000 ACPIAM ) @ 0x000f5df0
Jul 23 12:18:49 (none) ACPI: RSDT (v001 A M I OEMRSDT 0x09000406 MSFT 0x00000097) @ 0x1ff40000
Jul 23 12:18:49 (none) ACPI: FADT (v001 A M I OEMFACP 0x09000406 MSFT 0x00000097) @ 0x1ff40200
Jul 23 12:18:49 (none) ACPI: OEMB (v001 A M I OEMBIOS 0x09000406 MSFT 0x00000097) @ 0x1ff50040
Jul 23 12:18:49 (none) ACPI: DSDT (v001 1ABSP 1ABSP001 0x00000001 MSFT 0x02000001) @ 0x00000000
Jul 23 12:18:49 (none) ACPI: PM-Timer IO Port: 0x408
Jul 23 12:18:49 (none) Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
Jul 23 12:18:49 (none) Detected 1276.987 MHz processor.
Jul 23 12:18:49 (none) Built 1 zonelists
Jul 23 12:18:49 (none) Kernel command line: root=/dev/hda4 ro
Jul 23 12:18:49 (none) Found and enabled local APIC!
Jul 23 12:18:49 (none) mapped APIC to ffffd000 (fee00000)
Jul 23 12:18:49 (none) Enabling fast FPU save and restore... done.
Jul 23 12:18:49 (none) Enabling unmasked SIMD FPU exception support... done.
Jul 23 12:18:49 (none) Initializing CPU#0
Jul 23 12:18:49 (none) Event source pit configured with caps set: 07
Jul 23 12:18:49 (none) PID hash table entries: 2048 (order: 11, 8192 bytes)
Jul 23 12:18:49 (none) Console: colour VGA+ 80x25
Jul 23 12:18:49 (none) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 23 12:18:49 (none) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 23 12:18:49 (none) Memory: 514844k/523520k available (1921k kernel code, 8120k reserved, 725k data, 184k init, 0k highmem)
Jul 23 12:18:49 (none) Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jul 23 12:18:49 (none) Calibrating delay using timer specific routine.. 2197.93 BogoMIPS (lpj=1098965)
Jul 23 12:18:49 (none) Security Framework v1.0.0 initialized
Jul 23 12:18:49 (none) Mount-cache hash table entries: 512
Jul 23 12:18:49 (none) CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
Jul 23 12:18:49 (none) CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
Jul 23 12:18:49 (none) CPU: L1 I cache: 32K, L1 D cache: 32K
Jul 23 12:18:49 (none) CPU: L2 cache: 2048K
Jul 23 12:18:49 (none) CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000180 00000000 00000000
Jul 23 12:18:49 (none) Intel machine check architecture supported.
Jul 23 12:18:49 (none) Intel machine check reporting enabled on CPU#0.
Jul 23 12:18:49 (none) Checking 'hlt' instruction... OK.
Jul 23 12:18:49 (none) SMP alternatives: switching to UP code
Jul 23 12:18:49 (none) Freeing SMP alternatives: 16k freed
Jul 23 12:18:49 (none) checking if image is initramfs... it is
Jul 23 12:18:49 (none) Freeing initrd memory: 404k freed
Jul 23 12:18:49 (none) ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Jul 23 12:18:49 (none) ACPI: setting ELCR to 0200 (from 0c30)
Jul 23 12:18:49 (none) CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
Jul 23 12:18:49 (none) SMP motherboard not detected.
Jul 23 12:18:49 (none) lapic max_delta_ns: 1345393639
Jul 23 12:18:49 (none) Event source pit new caps set: 01
Jul 23 12:18:49 (none) Event source lapic configured with caps set: 06
Jul 23 12:18:49 (none) Brought up 1 CPUs
Jul 23 12:18:49 (none) migration_cost=0
Jul 23 12:18:49 (none) NET: Registered protocol family 16
Jul 23 12:18:49 (none) ACPI: bus type pci registered
Jul 23 12:18:49 (none) PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
Jul 23 12:18:49 (none) Setting up standard PCI resources
Jul 23 12:18:49 (none) ACPI: Subsystem revision 20060127
Jul 23 12:18:49 (none) ACPI Error (evregion-0303): No handler for Region [ECOR] (dff2e63c) [EmbeddedControl] [20060127]
Jul 23 12:18:49 (none) ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.PCI0.SBRG.EC0_.ACS_] (Node dff27900), AE_NOT_EXIST
Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.AC__._INI] (Node dff27420), AE_NOT_EXIST
Jul 23 12:18:49 (none) ACPI: Interpreter enabled
Jul 23 12:18:49 (none) ACPI: Using PIC for interrupt routing
Jul 23 12:18:49 (none) ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 23 12:18:49 (none) PCI: Probing PCI hardware (bus 00)
Jul 23 12:18:49 (none) ACPI Error (evregion-0303): No handler for Region [ECOR] (dff2e63c) [EmbeddedControl] [20060127]
Jul 23 12:18:49 (none) ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.PCI0.SBRG.EC0_.BATS] (Node dff278e0), AE_NOT_EXIST
Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.BAT0._STA] (Node dff245c0), AE_NOT_EXIST
Jul 23 12:18:49 (none) ACPI Error (uteval-0158): Method execution failed [_SB_.BAT0._STA] (Node dff245c0), AE_NOT_EXIST
Jul 23 12:18:49 (none) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
Jul 23 12:18:49 (none) PCI quirk: region 0500-053f claimed by ICH4 GPIO
Jul 23 12:18:49 (none) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Jul 23 12:18:49 (none) Boot video device is 0000:01:00.0
Jul 23 12:18:49 (none) PCI: Transparent bridge - 0000:00:1e.0
Jul 23 12:18:49 (none) PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
Jul 23 12:18:49 (none) Please report the result to linux-kernel to fix this permanently
Jul 23 12:18:49 (none) PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
Jul 23 12:18:49 (none) Please report the result to linux-kernel to fix this permanently
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
Jul 23 12:18:49 (none) ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P2._PRT]
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12)
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10)
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled.
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled.
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled.
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12)
Jul 23 12:18:49 (none) Linux Plug and Play Support v0.97 (c) Adam Belay
Jul 23 12:18:49 (none) pnp: PnP ACPI init
Jul 23 12:18:49 (none) pnp: PnP ACPI: found 15 devices
Jul 23 12:18:49 (none) SCSI subsystem initialized
Jul 23 12:18:49 (none) PCI: Using ACPI for IRQ routing
Jul 23 12:18:49 (none) PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Jul 23 12:18:49 (none) pnp: 00:09: ioport range 0x480-0x48f has been reserved
Jul 23 12:18:49 (none) pnp: 00:09: ioport range 0x5c0-0x5cf has been reserved
Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x540-0x55f has been reserved
Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x400-0x47f could not be reserved
Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x480-0x48f has been reserved
Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x500-0x53f has been reserved
Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x4c0-0x4cf has been reserved
Jul 23 12:18:49 (none) PCI: Bridge: 0000:00:01.0
Jul 23 12:18:49 (none) IO window: d000-dfff
Jul 23 12:18:49 (none) MEM window: ff800000-ff8fffff
Jul 23 12:18:49 (none) PREFETCH window: ce900000-de9fffff
Jul 23 12:18:49 (none) PCI: Bus 3, cardbus bridge: 0000:02:01.0
Jul 23 12:18:49 (none) IO window: 00001000-000010ff
Jul 23 12:18:49 (none) IO window: 00001400-000014ff
Jul 23 12:18:49 (none) PREFETCH window: 32000000-33ffffff
Jul 23 12:18:49 (none) MEM window: 34000000-35ffffff
Jul 23 12:18:49 (none) PCI: Bus 7, cardbus bridge: 0000:02:01.1
Jul 23 12:18:49 (none) IO window: 00001800-000018ff
Jul 23 12:18:49 (none) IO window: 00001c00-00001cff
Jul 23 12:18:49 (none) PREFETCH window: 36000000-37ffffff
Jul 23 12:18:49 (none) MEM window: 38000000-39ffffff
Jul 23 12:18:49 (none) PCI: Bridge: 0000:00:1e.0
Jul 23 12:18:49 (none) IO window: 1000-1fff
Jul 23 12:18:49 (none) MEM window: ff900000-ff9fffff
Jul 23 12:18:49 (none) PREFETCH window: dea00000-deafffff
Jul 23 12:18:49 (none) PCI: Enabling device 0000:00:1e.0 (0106 -> 0107)
Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:00:1e.0 to 64
Jul 23 12:18:49 (none) PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
Jul 23 12:18:49 (none) PCI: setting IRQ 4 as level-triggered
Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:02:01.0 to 64
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Jul 23 12:18:49 (none) PCI: setting IRQ 11 as level-triggered
Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:02:01.1 to 64
Jul 23 12:18:49 (none) NET: Registered protocol family 2
Jul 23 12:18:49 (none) IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jul 23 12:18:49 (none) TCP established hash table entries: 16384 (order: 5, 196608 bytes)
Jul 23 12:18:49 (none) TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
Jul 23 12:18:49 (none) TCP: Hash tables configured (established 16384 bind 8192)
Jul 23 12:18:49 (none) TCP reno registered
Jul 23 12:18:49 (none) apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Jul 23 12:18:49 (none) apm: overridden by ACPI.
Jul 23 12:18:49 (none) VFS: Disk quotas dquot_6.5.1
Jul 23 12:18:49 (none) Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jul 23 12:18:49 (none) Installing knfsd (copyright (C) 1996 [email protected]).
Jul 23 12:18:49 (none) Initializing Cryptographic API
Jul 23 12:18:49 (none) io scheduler noop registered
Jul 23 12:18:49 (none) io scheduler anticipatory registered
Jul 23 12:18:49 (none) io scheduler deadline registered
Jul 23 12:18:49 (none) io scheduler cfq registered (default)
Jul 23 12:18:49 (none) vesafb: ATI Technologies Inc., P10 , 01.00 (OEM: ATI MOBILITY RADEON 9600 )
Jul 23 12:18:49 (none) vesafb: VBE version: 2.0
Jul 23 12:18:49 (none) vesafb: protected mode interface info at c000:5680
Jul 23 12:18:49 (none) vesafb: pmi: set display start = c00c56ee, set palette = c00c5728
Jul 23 12:18:49 (none) vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4
Jul 23 12:18:49 (none) vesafb: no monitor limits have been set
Jul 23 12:18:49 (none) vesafb: scrolling: redraw
Jul 23 12:18:49 (none) Console: switching to colour frame buffer device 128x48
Jul 23 12:18:49 (none) vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 6144k, total 65536k
Jul 23 12:18:49 (none) fb0: VESA VGA frame buffer device
Jul 23 12:18:49 (none) ACPI: AC Adapter [AC] (on-line)
Jul 23 12:18:49 (none) ACPI: Battery Slot [BAT0] (battery present)
Jul 23 12:18:49 (none) ACPI: Battery Slot [BAT1] (battery absent)
Jul 23 12:18:49 (none) ACPI: Power Button (FF) [PWRF]
Jul 23 12:18:49 (none) ACPI: Lid Switch [LID]
Jul 23 12:18:49 (none) ACPI: Sleep Button (CM) [SLPB]
Jul 23 12:18:49 (none) ACPI: Power Button (CM) [PWRB]
Jul 23 12:18:49 (none) ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Jul 23 12:18:49 (none) ACPI: CPU0 (power states: C1[C1] C2[C2])
Jul 23 12:18:49 (none) ACPI: Thermal Zone [THRM] (94 C)
Jul 23 12:18:49 (none) isapnp: Scanning for PnP cards...
Jul 23 12:18:49 (none) isapnp: No Plug & Play device found
Jul 23 12:18:49 (none) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Jul 23 12:18:49 (none) serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
Jul 23 12:18:49 (none) floppy0: no floppy controllers found
Jul 23 12:18:49 (none) RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Jul 23 12:18:49 (none) loop: loaded (max 8 devices)
Jul 23 12:18:49 (none) PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
Jul 23 12:18:49 (none) i8042.c: Detected active multiplexing controller, rev 1.1.
Jul 23 12:18:49 (none) serio: i8042 AUX0 port at 0x60,0x64 irq 12
Jul 23 12:18:49 (none) serio: i8042 AUX1 port at 0x60,0x64 irq 12
Jul 23 12:18:49 (none) serio: i8042 AUX2 port at 0x60,0x64 irq 12
Jul 23 12:18:49 (none) serio: i8042 AUX3 port at 0x60,0x64 irq 12
Jul 23 12:18:49 (none) serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 23 12:18:49 (none) mice: PS/2 mouse device common for all mice
Jul 23 12:18:49 (none) TCP bic registered
Jul 23 12:18:49 (none) NET: Registered protocol family 1
Jul 23 12:18:49 (none) NET: Registered protocol family 17
Jul 23 12:18:49 (none) Using IPI No-Shortcut mode
Jul 23 12:18:49 (none) Suspend2 Core.
Jul 23 12:18:49 (none) Time: tsc clocksource has been installed.
Jul 23 12:18:49 (none) Suspend2 Compression Driver loading.
Jul 23 12:18:49 (none) Time: acpi_pm clocksource has been installed.
Jul 23 12:18:49 (none) Event source pit disabled
Jul 23 12:18:49 (none) Event source lapic configured with caps set: 08
Jul 23 12:18:49 (none) hrtimers: Switched to high resolution mode CPU 0
Jul 23 12:18:49 (none) Suspend2 Encryption Driver loading.
Jul 23 12:18:49 (none) Suspend2 Swap Writer loading.
Jul 23 12:18:49 (none) Suspend2 FileWriter loading.
Jul 23 12:18:49 (none) ACPI wakeup devices:
Jul 23 12:18:49 (none) SMBS MODM P0P2 CBC1 USB1 USB2 USB3
Jul 23 12:18:49 (none) ACPI: (supports S0 S3 S4 S5)
Jul 23 12:18:49 (none) Freeing unused kernel memory: 184k freed
Jul 23 12:18:49 (none) input: AT Translated Set 2 keyboard as /class/input/input0
Jul 23 12:18:49 (none) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jul 23 12:18:49 (none) ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jul 23 12:18:49 (none) ICH4: IDE controller at PCI slot 0000:00:1f.1
Jul 23 12:18:49 (none) PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
Jul 23 12:18:49 (none) PCI: setting IRQ 10 as level-triggered
Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
Jul 23 12:18:49 (none) ICH4: chipset revision 3
Jul 23 12:18:49 (none) ICH4: not 100% native mode: will probe irqs later
Jul 23 12:18:49 (none) ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
Jul 23 12:18:49 (none) ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Jul 23 12:18:49 (none) Probing IDE interface ide0...
Jul 23 12:18:49 (none) Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
Jul 23 12:18:49 (none) input: SynPS/2 Synaptics TouchPad as /class/input/input1
Then I have to press enter and the powerbutton (asus M6) a few times, and then, a line at a time a couple of messages appear, then after "udev events" has passed, boot proceeds normally.
Jul 23 12:18:49 (none) hda: IC25N060ATMR04-0, ATA DISK drive
Jul 23 12:18:49 (none) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jul 23 12:18:49 (none) Probing IDE interface ide1...
Jul 23 12:18:49 (none) hdc: MATSHITADVD-RAM UJ-830S, ATAPI CD/DVD-ROM drive
Jul 23 12:18:49 (none) ide1 at 0x170-0x177,0x376 on irq 15
Jul 23 12:18:49 (none) hda: max request size: 512KiB
Jul 23 12:18:49 (none) hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
Jul 23 12:18:49 (none) hda: cache flushes supported
Jul 23 12:18:49 (none) hda: hda1 hda2 <hda5> hda3 hda4
Jul 23 12:18:49 (none) hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jul 23 12:18:49 (none) Uniform CD-ROM driver Revision: 3.20
Jul 23 12:18:49 (none) kjournald starting. Commit interval 5 seconds
Jul 23 12:18:49 (none) EXT3-fs: mounted filesystem with ordered data mode.
Jul 23 12:18:49 (none) usbcore: registered new driver usbfs
Jul 23 12:18:49 (none) usbcore: registered new driver hub
Jul 23 12:18:49 (none) Initializing USB Mass Storage driver...
Jul 23 12:18:49 (none) usbcore: registered new driver usb-storage
Jul 23 12:18:49 (none) USB Mass Storage support registered.
Jul 23 12:18:49 (none) Linux agpgart interface v0.101 (c) Dave Jones
Jul 23 12:18:49 (none) fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Jul 23 12:18:49 (none) [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
Jul 23 12:18:49 (none) [fglrx] module loaded - fglrx 8.26.18 [Jun 22 2006] on minor 0
Jul 23 12:18:49 (none) usbcore: registered new driver usblp
Jul 23 12:18:49 (none) drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jul 23 12:18:49 (none) Capability LSM initialized
Jul 23 12:18:49 (none) fuse init (API version 7.6)
Jul 23 12:18:49 (none) input: PC Speaker as /class/input/input2
Jul 23 12:18:49 (none) NET: Registered protocol family 23
Jul 23 12:18:49 (none) nsc-ircc, chip->init
Jul 23 12:18:49 (none) nsc-ircc, Found chip at base=0x02e
Jul 23 12:18:49 (none) nsc-ircc, driver loaded (Dag Brattli)
Jul 23 12:18:49 (none) nsc_ircc_open(), can't get iobase of 0x2f8
Jul 23 12:18:49 (none) nsc-ircc, Found chip at base=0x02e
Jul 23 12:18:49 (none) nsc-ircc, driver loaded (Dag Brattli)
Jul 23 12:18:49 (none) nsc_ircc_open(), can't get iobase of 0x2f8
Jul 23 12:18:49 (none) pnp: Device 00:07 disabled.
I am using mkinitcpio already: /boot/grub/menu.lst:
# (0) Arch Linux
title Arch Linux
root (hd0,2)
kernel /vmlinuz26beyond root=/dev/hda4 ro
initrd /kernel26beyond.img
my /etc/mkinitcpio.conf:
MODULES=""
BINARIES=""
FILES=""
HOOKS="base udev autodetect ide filesystems"
I tried removing scsi and sata, since my root is on an ide disk. But the problem persists.
also recreating an image using mkinitcpio or reinstalling the kernel26beyond package using pacman doesn't help.
Does anyone have any idea what might be wrong and how this problem might be resolved.
It seems like a trivial issue since the systems basically works fine otherwise. However, I can't figure it out by myself, I have tried for a week.
Any help would be greatly appreciated.

I'm not sure if this will help you, but I suddenly was having a lot of trouble booting. My system would just freeze with a blinking cursor. I thought it had something to do with my floppy drive because if I changed the boot priority in my bios to boot from the hard disk 1st, the system would boot but would hang for a very long time in areas, and as long as 5 minutes loading uevents. I suspected this was a udev problem.
I issued a few commands to reset udev, thinking maybe recent updates didn't take effect, which did the trick...
# udevtrigger
# udevcontrol reload_rules
After that, everything is back to normal. I'm still learning about udev and I'm still fuzzy about a lot of the techy stuff.

HP laptop won't boot at all

My one and half year old Hp 2000 laptop won't boot at all. When I press the power button, it doesn't show any sign of life at all.
I have tried Hard test several times yet it didn't fix it.
Battery charges, power adapter working.
I have also tried to boot using the AC adapter alone yet my precious laptop isn't showing any sign of life.
Please how do I fix this? I need to do my assignment and prepare for my exams, and I can't afford a new laptop. Not when the current laptop is pretty new.
Please help me HP support.
Thank you in advance.

Hi @Chichiiii ,
Thank You for your inquiry.
I understand that when you power on your notebook it is unresponsive. You did state that the AC adapter is working and the battery is charging.
Here is a link to HP Notebook PCs - Computer Does Not Start (Windows 8), which has multiple links to help you determine the issue.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Xperia Miro doesn't boot at all.

Similar Messages

Maybe you are looking for