Xperia Neo media server doesn't work anymore with Sony Bravia TV after ICS update!
Xperia Neo (MT15i) updated from 2.3.4 to 4.0.4 (4.1.B.0.431). I did not perform any reset (factory settings) after the update.
Media server does not work anymore with Sony Bravia TV KDL40-NX700. With 2.3.4 it worked correctly before.
When I start the media server on my Xperia Neo and try to view my photos on my Bravia TV it shows connection, I am also able to view different folders on the Smartphone but when it tries to load the photos in any folder on the Smartphone it stops working after a while. Feedback on TV is "cannot connect to media sever". The same procedure worked without any problems when using 2.3.4 before.
Is this a known issue and is there any solution for this?
Wow that is a new one, great find!
I wish I had tested that with my Ray, as I had used the media server feature quite a bit with my DirecTV receiver when on Gingerbread. But too late, it's on the way back to Sony to get rolled back to Gingerbread.
Too many other problems with ICS that have crippled my device.
1) Wi-Fi Hotspot does not work anymore
2) USB tethering does not work anymore
3) LED notification issues for incoming SMS
4) Dialer slow to load
5) HD Video recording skip frames and jitter.
6) Bluetooth AVRCP profile broke (can't use the play/pause button on my car stereo anymore)
If you have not done so take a look at the above features and see what you turn up.
~Cheers~
Bob H
Minneapolis, MN
USA
ST18a Ray
Similar Messages
-
Snow Leopard as PXE server doesn't work anymore with Debian Lenny
Hello
I was using a box with Mac OS X 10.6.2 as a PXE boot server, providing a Debian Etch installer as boot image.
I wanted to upgrade to the Debian Lenny PXE image, but it doesn't work anymore.
I m not sure how I can debug that. I m a sure of one thing, switching for the Debian Etch image to the Debian Lenny one triggers those kernel log messages during the PXE boot, and the host who tried to boot hanged ( a Virtualbox VM).
+Feb 23 20:34:33 macbookpro kernel[0]: indelayed_cksumoffset: ip_len 50688 (198) doesn't match actual length 212+
+Feb 23 20:34:58: --- last message repeated 6 times ---+
Here is my /etc/bootpd.plist file :
+<?xml version="1.0" encoding="UTF-8"?>+
+<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">+
+<plist version="1.0">+
<dict>
<key>dhcp_enabled</key>
<true/>
<key>bootp_enabled</key>
<true/>
<key>netboot_enable</key>
<false/>
<key>Subnets</key>
<array>
<dict>
<key>name</key>
+<string>My subnet</string>+
<key>net_mask</key>
<string>255.255.255.0</string>
<key>net_address</key>
<string>192.168.0.0</string>
<key>net_range</key>
<array>
<string>192.168.0.3</string>
<string>192.168.0.6</string>
</array>
<key>allocate</key>
<true/>
<key>dhcpoption128</key>
<string>192.168.0.10</string>
<key>dhcpoption66</key>
<string>192.168.0.10</string>
<key>dhcpoption67</key>
<string>/etch/pxelinux.0</string>
</dict>
</array>
</dict>
</plist>
My /private/tftpboot/ tree is created from the http://http.us.debian.org/debian/dists/etch/main/installer-i386/current/images/n etboot/netboot.tar.gz archive. I used http://http.us.debian.org/debian/dists/lenny/main/installer-i386/current/images/ netboot/netboot.tar.gz for the Debian Lenny tree.
So, can someone help me ?I disabled bootp. In verbose and debug, everything seems to go well. The option 128 isn't accepted by the daemon, i disabled it too, the TFTP server is the same server than the DHCP, so it still works.
Here s the log when using the Debian Lenny image, almost the same than with Debian Etch image.
+bootpd[4754]: server starting+
+bootpd[4754]: can't open /etc/bootptab+
+bootpd[4754]: server name macbookpro.local+
+bootpd[4754]: interface en0: ip 192.168.0.10 mask 255.255.255.0+
+bootpd[4754]: interface vnic0: ip 10.211.55.2 mask 255.255.255.0+
+bootpd[4754]: interface vnic1: ip 10.37.129.2 mask 255.255.255.0+
+0.0.0.0 ==> 192.168.0.1+
+10.37.129 ==> link 8+
+10.211.55 ==> link 7+
+127 ==> 127.0.0.1+
+169.254 ==> link 4+
+192.168.0 ==> link 4+
+There are 1 entries+
+1. Subnet 'My subnet'+
+ Network: 192.168.0.0/255.255.255.0+
+ Range: 192.168.0.3..192.168.0.6+
+ Allocate: yes+
+ Lease Min: 3600 Lease Max: 86400+
+ Options:+
+ Code Length Data+
+ 66 4 c0 a8 00 0a+
+ 67 17 2f 6c 65 6e 6e 79 2f 70 78 65 6c 69 6e 75 78 2e 30+
+DNS servers: 89.2.0.1 89.2.0.2+
+destination address 255.255.255.255+
+---------------- Client Request --------------------+
+op = BOOTREQUEST+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 4+
+ciaddr = 0.0.0.0+
+yiaddr = 0.0.0.0+
+siaddr = 0.0.0.0+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname =+
+file =+
options:
+Options count is 8+
+dhcpmessagetype (uint8): DISCOVER 0x1+
+parameterrequestlist (uint8_mult): {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0xb, 0xc, 0xd, 0xf, 0x10, 0x11, 0x12, 0x16, 0x17, 0x1c, 0x28, 0x29, 0x2a, 0x2b, 0x32, 0x33, 0x36, 0x3a, 0x3b, 0x3c, 0x42, 0x43, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87}+
+maxdhcp_messagesize (uint16): 0x4ec+
+option_97 (opaque):+
+0000 00 b2 9a 0c 89 ce 8e 46 08 83 90 a7 d2 76 ee 87 .......F.....v..+
+0010 6e n+
+option_93 (opaque):+
+0000 00 00 ..+
+option_94 (opaque):+
+0000 01 02 01 ...+
+vendorclassidentifier (string): PXEClient:Arch:00000:UNDI:002001+
+end (none):+
+bootpd[4754]: DHCP DISCOVER [en0]: 1,8:0:27:6a:89:5e+
state=INIT
+bootpd[4754]: default route added as router+
+bootpd[4754]: default dns servers added+
+Sending: DHCP OFFER (size 303)+
+bootpd[4754]: replying using broadcast IP address+
+bootpd[4754]: replying to 255.255.255.255+
+=================== Server Reply =====================+
+op = BOOTREPLY+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 0+
+ciaddr = 0.0.0.0+
+yiaddr = 192.168.0.3+
+siaddr = 192.168.0.10+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname = macbookpro.local+
+file =+
options:
+Options count is 9+
+dhcpmessagetype (uint8): OFFER 0x2+
+server_identifier (ip): 192.168.0.10+
+lease_time (uint32): 0x14dd5+
+subnet_mask (ip): 255.255.255.0+
+router (ip_mult): {192.168.0.1}+
+domainnameserver (ip_mult): {89.2.0.1, 89.2.0.2}+
+tftpservername (ip_mult): {192.168.0.10}+
+bootfile_name (string): /lenny/pxelinux.0+
+end (none):+
+bootpd[4754]: OFFER sent <no hostname> 192.168.0.3 pktsize 303+
+bootpd[4754]: service time 0.007299 seconds+
+destination address 255.255.255.255+
+---------------- Client Request --------------------+
+op = BOOTREQUEST+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 4+
+ciaddr = 0.0.0.0+
+yiaddr = 0.0.0.0+
+siaddr = 0.0.0.0+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname =+
+file =+
options:
+Options count is 10+
+dhcpmessagetype (uint8): REQUEST 0x3+
+requestedipaddress (ip): 192.168.0.3+
+parameterrequestlist (uint8_mult): {0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0xb, 0xc, 0xd, 0xf, 0x10, 0x11, 0x12, 0x16, 0x17, 0x1c, 0x28, 0x29, 0x2a, 0x2b, 0x32, 0x33, 0x36, 0x3a, 0x3b, 0x3c, 0x42, 0x43, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87}+
+maxdhcp_messagesize (uint16): 0x4ec+
+server_identifier (ip): 192.168.0.10+
+option_97 (opaque):+
+0000 00 b2 9a 0c 89 ce 8e 46 08 83 90 a7 d2 76 ee 87 .......F.....v..+
+0010 6e n+
+option_93 (opaque):+
+0000 00 00 ..+
+option_94 (opaque):+
+0000 01 02 01 ...+
+vendorclassidentifier (string): PXEClient:Arch:00000:UNDI:002001+
+end (none):+
+bootpd[4754]: DHCP REQUEST [en0]: 1,8:0:27:6a:89:5e+
SELECT
state=SELECT
+bootpd[4754]: default route added as router+
+bootpd[4754]: default dns servers added+
+Sending: DHCP ACK (size 303)+
+bootpd[4754]: replying using broadcast IP address+
+bootpd[4754]: replying to 255.255.255.255+
+=================== Server Reply =====================+
+op = BOOTREPLY+
+htype = 1+
+flags = 8000+
+hlen = 6+
+hops = 0+
+xid = 678070622+
+secs = 0+
+ciaddr = 0.0.0.0+
+yiaddr = 192.168.0.3+
+siaddr = 192.168.0.10+
+giaddr = 0.0.0.0+
+chaddr = 8:0:27:6a:89:5e+
+sname = macbookpro.local+
+file =+
options:
+Options count is 9+
+dhcpmessagetype (uint8): ACK 0x5+
+server_identifier (ip): 192.168.0.10+
+lease_time (uint32): 0x14dd5+
+subnet_mask (ip): 255.255.255.0+
+router (ip_mult): {192.168.0.1}+
+domainnameserver (ip_mult): {89.2.0.1, 89.2.0.2}+
+tftpservername (ip_mult): {192.168.0.10}+
+bootfile_name (string): /lenny/pxelinux.0+
+end (none):+
+bootpd[4754]: ACK sent <no hostname> 192.168.0.3 pktsize 303+
+bootpd[4754]: service time 0.001884 seconds+ -
Media Manager doesn't work anymore
When I'm capturing and logging footage, Media Manager is part of my work flow. I capture the entire tape, then use the DV Start/Stop detect function to make subclips. Then I use Media Manager to create smaller versions of the subclips. I I log and archive the newly created compressed clips, and use them for edits.
But now with FCP 5.0.2, Media Manager doesn't work like it used to. The end result of outputting the subclips is one large clip. If I output half of them at a clip (1,3,5,7,9,etc.) and then go back and do the rest (2,4,6,8,10,...) it works. But what a pain. I've tried every variation of settings. Nothing make a difference.
What gives?
Also, the subclips all now have the first frame of the next clip stuck on the end. That's not Media Manager, it happens before. But it is not cool.
Anyone having similar problems, and any solutions?
-Daniel CohenTom,
Here is the process:
Capture the entire DV tape as one long clip.
Use DV Start/Stop detection to create markers. (This results in that extra last frame from the beginning of the next clip.)
Make subclips from the markers.
Select subclips and go to Media Manager
Use Media Manager to Recompress
-Recompress media using OfflineRT NTSC (Photo JPEG)
-Delete unused media from selected clips.
-No handles (I want the clip as it was on the tape)
-Base media file names on clip names
-Select a media destination
And off it goes.
Instead of creating individual clips (at the slected location) it makes one long clip, like the source just smaller because it is now compressed.
In earlier version of FCP this worked. Something has changed in version 5.
I can trick the Media Manager by selecting every other subclip, outputting, and then going back and selecting the rest. But that is twice the work. And I still have those darn extra frames at the end of the clips.
Any ideas. (I have already done the Quicktime repair listed in many other threads.)
-Daniel Cohen -
USB personal hotspot doesn't work anymore with 10.6.8 Snow Leopard, iTunes 11.1 and iPhone5 ios7
Ciao
I'm using iPhone 5 with ios7 and Macbookpro with 10.6.8 SnowLeopard.
After updating to iTunes 11.1and ios7 hotspot USB doesn't work anymore, wifi and bluetooth work fine.
In system network preferences iPhone usb connection is not detected.
I tried to change the kext file with the Time Machine's old one but no response!!!
Can somebody help me
ThanksAnyone has any advice? Or the problem is just the age and incompatibility of the old MacBook Pro 1,1 A1150 (Mid 2006) and the best way will be to change it into something newer?
-
AirPrint doesn't work anymore with iOS 8
wwith iOS 8 update, AirPrint doesnt work anymore with HP printer. Lenova pc works fine. Any ideas what to do?
Hello there, Bkurowski818.
The following Knowledge Base article offers up some great recommendations for troubleshooting AirPrint issues:
About AirPrint - Apple Support
For best results
Make sure your software is up to date. For iOS, verify that your device is using the latest version of iOS available and that the app you're printing from is up to date. For OS X, Use Software Update to update OS X and apps you've purchased from the Mac App Store.
AirPrint printers connected to the USB port of an Apple AirPort Base Station or AirPort Time Capsule are not supported with AirPrint. Connect your AirPrint printer to your network using Wi-Fi, or connect it to a LAN port on your AirPort device using Ethernet.
Make sure that your AirPrint printer is connected to your network before attempting to print. Some AirPrint printers can take several minutes to join a network after being turned on.
If you're unable to print
Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
Make sure your printer has paper, and enough ink or toner installed.
Make sure your printer is connected to the same Wi-Fi network as your iOS device.
Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
The information below is provided by each manufacturer and is updated once a month by Apple. You can use the Find feature of your web browser (usually Command-F) to search for a specific device in this list. If you don't see your printer or server listed, check with the printer manufacturer for more information.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Airplay doesn't work anymore on my iPhone 6 after iOS 8.2 upgrade
Hello,
I'm using Airport Express (2nd generation) for streaming music on my stereo from 2 iPhones: one 5 and one 6. Since I upgraded my iPhone 6 to iOS8.2, Airplay is not working anymore on this phone: Airplay icon is visible and actionnable, but it doesn' produce any sound on my stereo. Airport Utiliy is OK.
Airplay is still working on my iPhone 5 which hasn't been upgraded.
I did a hard reset of my iPhone 6, with no success.
Thanks for your help.Hi thierryfromparisfrance,
I'm sorry to hear you are having this issue with your iPhone 6 after a recent update. If you continue to have issues with AirPlay from your iPhone 6, you may find the troubleshooting steps outlined in the following article helpful:
Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden -
[Solved] Alac doesn't work anymore with Gstreamer0.10
Apple Loseless Audio Codec support seems to be broken for me in the 0.10 branch of gstreamer. Before I was able to play ALAC files in rhythmbox and banshee but it does not work anymore. I think the support for ALAC files is integrated in the package gstreamer-ffmpeg.
This problem does't seems to occur in the 1.0 branch of gstreamer as ALAC files work with Totem and it also work with vlc which use dirrectly ffmpeg.
Does someone have the same problem or is it a problem with my system ?
I tried to reinstall gstreamer0.10 and all plugins but it didn't solve the problem.
Last edited by sedutom (2013-04-22 14:18:39)Put as solved, it works back with the new version of rhythmbox
Last edited by sedutom (2013-04-22 14:19:59) -
could I use a 20$ giftcards from iTunes for a failed purchase Instead of a new credit card? I'm not going to add a new credit card to my account. When I try to update or download a new app it tells me I have to update my billing. So I can't do anything about it because I don't have a new credit card and I will not be getting one. I just want to use a 20$ gift card so that past purchase could just take it off of my giftcards I will add. Will this work?
Select None for payment method > iTunes Store: Changing account information
If None is not available > Why can’t I select None when I edit my payment information?
Yes, you can redeem an iTunes gift card for current purchases.
How to Redeem iTunes Gift Cards and content codes
And you can check the balance of a redeemed card > Account Home - Apple Store -
IWork doesn't work anymore with MacOSX Lion...
I had iWork '09 on MacOSX Snow Leopard and than I choose to install lion and was all right than I reinstall Lion because was really slowly. I didn't find all the iLife '11 and iWork. With iLife'11 I reinstall it from the TimeMachine Backup but I tried with iWork'09 and when I open Pages, Numbers or Keynotes there is a message that says:
Pages cannot be opened because of a problem.
Check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any avaiable updates for the application of Mac Os X.
I tried to download the last update but nothing change, and if I wold install it again would mean t buy again all 3 of them....
Thanks, LucaLuca - uninstall iWork by using Yvans script.
Go to Yvans iDisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:uninstall iWork '09.zip
Expand the archive and run the script.
Install iWork from the dvd you have.
Then do the Software update check and install the updates. Otherwise it will not work. -
Solaris 10 JumpStart server doesn't works correctly with Solaris Express
Hi All,
I have configured the JumpStart server on Solaris 10.
I install Solaris 10 and Solaris 9 also using flash installation.
When I run installation installer ask me 2 or 3 questions (I don't exactly remember) about NFS and then it install automatically.
Does anybody know how to avoid these few questions at the beginning of installation?
Thanks,
DanielThe first question is:
�� The Solaris Installation Program ������������������������������
The Solaris installation program is divided into a series of short sections
where you'll be prompted to provide information for the installation. At
the end of each section, you'll be able to change the selections you've
made before continuing.
About navigation...
- The mouse cannot be used
- If your keyboard does not have function keys, or they do not
respond, press ESC; the legend at the bottom of the screen
will change to show the ESC keys to use for navigation.
����������������������������������������������������������������
F2_Continue F6_Help
Then I select to Continue:
�� Identify This System ����������������������
On the next screens, you must identify this system as networked or
non-networked, and set the default time zone and date/time.
If this system is networked, the software will try to find the information
it needs to identify your system; you will be prompted to supply any
information it cannot find.
> To begin identifying this system, press F2.
����������������������������������������������������������������
Esc-2_Continue Esc-6_Help
Then I select to continue:
�� NFSv4 Domain Name ����������������������������
NFS version 4 uses a domain name that is automatically derived from the system's naming services. The derived domain name is sufficient for most configurations. In a few cases, mounts that cross domain boundaries might cause files to appear to be owned by "nobody" due to the lack of a common domain name.
The current NFSv4 default domain is: ""
NFSv4 Domain Configuration
���������������������������������������������������������������� [X] Use the NFSv4 domain derived by the system
[ ] Specify a different NFSv4 domain
������������������������������������������������������
Esc-2_Continue Esc-6_Help
I select continue:
�� Confirm Information for NFSv4 Domain ������������������
> Confirm the following information. If it is correct, press F2;
to change any information, press F4.
NFSv4 Domain Name: << Value to be derived dynamically >>
������������������������������������������������������
Esc-2_Continue Esc-4_Change Esc-6_Help
Again I select continue and then the Solaris Express installs automatically. -
My Gmail account doesn't work anymore with Mail (the box is empty even after syncronization)
Since the update of Mavericks my Gmail account bugs a lot ! (also with the update for Gmail).
I tried to "re-build" the mail box, since it didn't work. And since I did this my Gmail box is empty, like I have no emails... I tried to sync but nothing happens.. I deleted and put again the account but nothing...
Can anybody help me with this?
Thanks a lot !There is an update available for Mail/Mavericks. Did you try updating.
"Mail Update for Mavericks"
http://support.apple.com/downloads/ -
Digi 002 rack doesn't work anymore with Logic Pro 7
Any help much appreciated: Like an idiot, I "upgraded" to Pro Tools 7 software from 6.9.2. Logic 7.0.1 had been running fine with the 002 as my audio interface when I had Pro Tools 6.9.2 installed.
But under Pro Tools 7, suddenly everything sounded terrible. Anytime I played my keyboard, either triggering Sculpture, the EXS24, playing audio, any instrument, it sound like ugly static.
So I uninstalled Pro Tools 7, and reinstalled 6.9.2. That didn't help, which surprised me, because I thought I "went back" to my previous setup. But something must have changed. I did go through some of the forum's troubleshooting tip. I repaired permissions, I trashed Logic and Pro Tools preferences, I verified my hard disk, checked ram, etc.
So now I'm stumped. Anyone have anything I should try?
Thanks much,
JimMaybe you need to go to Digidesign.com and find the latest core audio driver and install it ?
-
Having my Telus email refusing to send attachment (one meg picture), without attachment everything is OK, can receive attachments. Weird thing is my live.ca account works perfectly. All that happens is the clock and sending icon would alternate (left it for a couple of hours - still the same). Same result using Wi-Fi or LTE, 4G. So called tech support @ Telus and they have no solution and have two Z10 with same problem sending attachment but on Gmail account. They are sending a ticket to Blackberry to see if problem can be resolved.
Emails were working perfectly before software ugrade three days ago. Anyone else having these issues? Ideas to resolve?FINALLY, after TWO full months of waiting and checking every day, the problem has been resolved. I'm disappointed that Blackberry took so long to fix, but happy that my email can finally send attachments. Also disappointed that I was not notified of the fix by my provider Telus (which they said they would). Hopefully the problem is permanently resolved and won't re-appear after another software update.
-
How to connect Xperia ray with PC over WiFi after ICS update?
Please don't tell me this option is now disabled. I also have the WiFi drop issues like many people before me but i assume we will have to wait untill the update for that fix. Needless to say, phone was working perfectly before this update.
The issue is with WPA and WPA2:
0day 00:59:03 wlan0: A wireless client is associated - XX:XX:XX:XX:XX:XX
0day 00:59:06 wlan0: A STA is rejected by 802.1x daemon - XX:XX:XX:XX:XX:XX
0day 00:59:06 wlan0: WPA2-AES PSK authentication in progress...
0day 00:59:06 wlan0: A wireless client is associated - XX:XX:XX:XX:XX:XX
0day 00:59:10 wlan0: A STA is rejected by 802.1x daemon - XX:XX:XX:XX:XX:XX
0day 00:59:10 wlan0: WPA2-AES PSK authentication in progress...
0day 00:59:10 wlan0: A wireless client is associated - XX:XX:XX:XX:XX:XX
0day 00:59:13 wlan0: A STA is rejected by 802.1x daemon - XX:XX:XX:XX:XX:XX
0day 00:59:13 wlan0: WPA2-AES PSK authentication in progress...
0day 00:59:13 wlan0: A wireless client is associated - XX:XX:XX:XX:XX:XX
0day 00:59:16 wlan0: A STA is rejected by 802.1x daemon - XX:XX:XX:XX:XX:XX
and so on...
XX:XX:XX:XX:XX:XX is my MAC
as you can see in few seconds the phone is connected and then refused by the access point. -
Does the VZW Family Locator work on the Droid Razr Maxx after ICS update?
The VZW Family Locator App from "Play Store" finds the Area-Location of my phone to about five miles, but it will not finish the "refining" action before timing out. Am I leaving something undone or is this App only partially compatible with the Droid Razr Maxx.
Benidle, I'll be happy to assist you with Family Locator on your Razr Maxx. The app is compatible, but I just want to make sure that you have the feature active on your account as well. The app in the PlayStore is free to download, but there is a $9.99 charge for Family Locator. You can add this feature on your account by logging into My Verizon.
If you have the feature and are still receiving this error, make sure your location settings are all turned on in Settings, Location Services.
Let me know if you need further assistance!
MarquiaF_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
Firefox 5 is running very very slow does anyone know what I can do to fix it?
I have FF ver. 5 and for about a week now it is taking way longer than normal to load any and all pages. I can't play any of my games because of how slow it is running. I'll click on a dropdown menu or something of the like like the "Tool's" menu and
-
ZCM11SP1 Patchmanagement issues SR10731894561 SR10733938891
Hi, We have number is ISSUES with ZCM11SP1a. 1) The Features and not same level as Zenworks Patchmanagement 6.4 which is still working well for us so this move to ZCM11SP1 seem like a backward in years i) Manatroy Groups in ZCM is hopeless nosleep gr
-
Error While running Oracle Look and feel Template Form - (LAF_TEMPLATE)
Forms Version 10.1.2.3 JRE version 1.6.0_30 Operating System Windows XP I am trying to setup oracle look and feel project on my local machine. For that i upgraded forms to 10.1.2.3 then i also applied path no *9593176* (But not yet performed steps re
-
Firefox locks up when I close it, then refuses to open again until I restart my PC
Firefox refuses to open again after it freezes. This is happening every day and is fast becoming a browser that I will drop and never use again. As a long time user of Firefox I expected a more reliable product from Mozilla. The last 4 releases have
-
Don't buy U330! Wifi 'Local Only' Issue can't connect to internet anywhere!
If you are familiar with the local only problem, like I have become in recent weeks, you know the frustration of not being able to connect to the internet with your brand new computer when your ten year old laptop can surf the web with no problem. No