[Xperia Pro] Cant save configuration message after unlocking bootloader

Today i unlocked my bootloader using flashtool and it was successfully unlocked. Then i power on my phone. And all apps installed on m phone were gone( i knew that before). my internet settings were also gone. so i requested for connfiguration and got it. but when i  tried to save it i got a message that "Configuration message could not be authenticated against your sim card. Message cannot be used to configure your phone". and i was unable to save it.
then i tried manual setting. this time browser showed that it could not connect through the proxy address. then i deleted the proxy address and kept the box empty. surprisingly this time  it was able to connect. but stiil i cant link my gmail id with google play and cant use google play. why is this happening and what is the solution to this??

Hello Johan,
I am facing same issue of "Configuration message could not be authenticated against your sim card. Message cannot be used to configure your phone".
Using Sony Xperia Tipo Dual Sim in India.
On clicking configuration setting sent by my operator, I get this message. I also tried to add APN Manually but that too didn't work. Called customer care of service provider many times, however there support team is clueless.
Please help.
Neetu

Similar Messages

  • I cant save a pdf after editing

    I cant save a pdf after editing it. My edits = mark up of text using yellow highlight marker.
    the file downloaded from internet by doing saving as (in explorer that opened the pdf once cliced upon in the browser)
    the file looks like an pdf in my organizer
    use acrobat 9 pro
    browers explorer 9
    system windows 9 enterprise

    I have the same problem. I have a PDF thats 1gb, and it hasnt been any problems saving it in the past, but now when i try to add other pdf-documents to it i cant save the file. Literally nothing happens when i press "save", or "save as".
    I have tried to make a copy of the file and that doesnt help. Everything is "Allowed" when i check ctrl+d.
    What can be wrong?

  • Can you re-show push notifications for messages after unlocking iPhone?

    Is it possible to re-show push notifications for messages after unlocking an iPhone? If I open my phone, but want to re-see the same message push notifications after closing my phone would that be possible? In other words is there a way to customize a lock screen or to restore it?

    Confirmed. I did upgrade my phone and then "restore from backup" rather than setting up a new phone.
    Would setting up as a new phone delete my extra carrier profiles, or are these untouched? I could try that as well.               

  • Camera quality get worst after unlock bootloader

    Hi, I unlocked bootloader on my z2, after that I realize the Xreality mode not working, also the camera quality got worst. Is there a way to go back? I tried relocking the bootloader but got no luck. I may not need the xreality, but I really want the camera to be as good as before. Please help, thank you!

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I'm afraid it's not possible to go back. When you unlock the bootloader, the DRM keys are permanently deleted. This may affect advanced camera functionality as stated here: http://developer.sonymobile.com/unlockbootloader/
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Cant view video message after skype vanished

    hi there, im very confused. i sent a video message to a contact i send videomessages to all the time with no problems. but today when i logged on to my laptop, the skype rpogram had vanished from my computer. its wasnt anywhere even in my programs list. i reinstalled the latest version , no problem. restarted my computer no problem. sent a video message no problem. but when i recieved a video message i cant view it. please view print screen. please help. 
    also could i download this video? so i could view it offline? would that work. can you resend video messages? im very confused. 
    thanks
    Attachments:
    skype.png ‏148 KB

    Please,  run the DirectX diagnostics tool (32-bit version).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Cant receive text messages after update

    Updated my phone last night and now I can't receive text messages. I can send them but not receiving them. I share my account with my wife and I was receiving her text messages. When I go to iMessage, I can't select my own number. It is grey and not checked, but won't let me check it. I sign out of my account, and sign back in, and it shows the number checked when I sign in, but is not checked in the iMessage settings.

    Thommo wrote:
    Did I read that right 33 thousand, Why would you keep so many
    That's insane lol 
    @lagus 
    Chcek this out for future reference
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    you might want to consider backing up your texts with Gmail so you can access them anywhere, instead of storing them on your phone. 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Cant save big files in pendrives- macbook pro

    My macbook pro cant save big files in pendrives and cant copy big files to my HD... it stops when its abou 50-60%... does anyone have an idea?
    Thanks!

    Hey, i've solved it... i've cleaned the memory and now it's working! Thanks for the attention

  • Save configuration after fixing discrepancies with CM.

    How can I save running configuration after fixing discrepancies?
    Thanks.
    Regards.
    Andrea

    Sounds good!
    I'm looking for a flag or application setting on Campus Manager to save configuration. After a fix runnnig and startu are out of sync.
    Thanks.
    Regards.
    Andrea

  • How can i leave a copy of email message after receiving it on outlook, how can i leave a copy of email message after receiving it on outlook

    i have a problem that i cant save email message on both my iphone and on outlook on pc

    So even though he can see everything he's ever gotten in All Mail, he still wants in in Inbox?  I realize the how to do it is a little bit of a stumper and it shouldn't be so difficult... but honestly, I think the more relevant question would be Why? Why would anyone in their right mind want to do that?
    How does his Blackberry currently access his Gmail account? It should be a simple matter to duplicate the settings. It's undoubtedly just using POP and not deleting the originals as they are downloaded.
    Here's what's going to happen if that's the case. The very first time he sets up a new device... phone, pc, doesn't matter, to use POP, it's going to download every e-mail he's ever gotten unless he goes in and tells Gmail otherwise.

  • HT201210 Hi, cant update IO6. After downloading the update and processing it through Itunes on my mac.... and I have a factory unlocked Iphone 4S. Cant update the software. Waring message is say this devise is not eligible for build. Please help.

    Hi, cant update IO6. After downloading the update and processing it through Itunes on my mac.... and I have a factory unlocked Iphone 4S. Cant update the software. Waring message is say this devise is not eligible for build. Please help.

    Download iTunes using the tab at the top of this page. Then run the update with iTunes closed.

  • I was configured my mail id in ipad whether i have  open the mail the mail attachment like XLS files does not open and i have already download the payable Application Excell After that also it doesnot opening.either i have open then i cant save

    i am tryng to open the Attached xls file in the mail but i cant save that file in to a specified location also thats my problem please sugest a solution for that

    Having the same problem. Click mail, it bounces, a quick flash, then nothing. Also as a side note, Entourage as of this morning will no longer send mail to either of my work accounts, that is why I was trying mail. Also tried several other mail programs and the same result, can receive mails, but not send.
    Have reset the router, cable modem, checked that I have the latest MS and Apple software loaded and it is all good. Very strange.
    Ron

  • Problem in Xperia Pro after upgrading to Android 4.0.4

    Hi all,
    I purchased Xperia Pro a couple of weeks back. Android version initially installed was 2.3.4. I went on to upgrade the same to 4.0.4 yesterday (Build no: 4.1.B.0.431). Everything works fine but for my sliding keypad keys. The alphabet keys A,W,Q,Z are working erractically i.e if I press A, Q responds, if I press W,Z responds. This are the only four keys I am facing the problem with. Can anyone please shed light on this issue as to how I can get it resolved. Also can I downgrade my Android version back to 2.3.4 if I want to.
    Updation:
    1) I system reseted my phone but the same thing persists.
    2) Repair installed the android version via PC companion but still no joy.
    Cheers & Peace,
    Girish
    Message was edited by: Girish

    I visited the service center & they,quite conviniently, told me and I quote "The only way around  this problem is to downgrade it to GB everytime you upgrade to ICS because Xperia Pro doesnot work satisfactorily with ICS upgrade. The system becomes too sluggish,physical keypad doesnot respond,wi-fi fails to connect most of the time.We will be receiving a tweaked upgrade of ICS from Sony in a month or so,only then should you upgrade it to ICS." So the upgrade to ICS seems far off for me. After the downgrade, I was quite satisfied with the GB though only to find out my satisfaction didnot last for long when the wi-fi stopped working(keeps disconnecting frequently). I tried out various probable solutions mentioned here on the board but no joy.
    As for the isolation of the keypad problem to my phone, I noticed quite a few people here are facing the same problem with their phone. So I dont think its about a faulty script that I got installed on my phone. Sony needs to come out with a fix to this problem.
    http://talk.sonymobile.com/thread/43494?start=10&tstart=0
    http://talk.sonymobile.com/message/218343#218343

  • Iphone 3gs after restore cant activated.. phone is unlock..

    iphone 3gs after restore cant activated.. phone is unlock..

    Hello skyway9992,
    It sounds like you cannot activate your iPhone 3GS after restoring it.   I found an article that has steps for troubleshooting an activation issue on an iPhone.
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/ts3424
    I have included the steps from that article here:
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

    I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

    Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

Maybe you are looking for