Xperia SP - Internet and crashes & problems all round

Will not connect to a computer no matter what I try (different computers/cables); crashes all the time whilst using apps, texting or answering a call; freezes and turns itself off when trying to unlock it - anyone else experiencing this or has and has fixed the issues?? Any advice is gratefully recieved

I suggest that you try to repair the phone software using PC Companion. The phone should be turned off during this procedure so it might work even if the computer doesn't recognize the phone right now.
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.

Similar Messages

  • Multiple Plug-in and crashing problems

    Fairly recently, I have been getting plug in error messages that freeze my browser up for minutes at a time. This happens on multiple websites. I have tried to update my add-ons, but I am having issues even updating those. For example, I am running on adobe acrobat 10.1.1.33 and my browser tells me it is out of date. I click to update, and it takes me to a page that says the plug in has been blocked. It will not allow me to update through that avenue. I click the general 'check to see if your plug ins are up to date,' but on that page, I am told that the plug in IS up to date. I have tried manually installing the different updates I need (as this is happening with several different plug ins) but the update is apparently not applying. I have also done a general firefox 'reset' and am completely up to date. I just want the freezing and constant error messages to go away.

    Crashes or other problems with certain multimedia content in Firefox (such as Youtube videos and Flash animations or games) can often be resolved by performing the steps in these Knowledge Base articles:
    * [[Flash Plugin - Keep it up to date and troubleshoot problems]]
    * [[Flash 11.3 crashes]]
    * [[Flash 11.3 doesn't load video in Firefox]]
    On Windows Vista and above, you can disable Flash protected mode by following the instructions on these pages:
    * http://forums.adobe.com/thread/1018071#TemporaryWorkaround
    * http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
    (See [http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html this Adobe blog post] for technical details about Flash protected mode.)
    Please tell us if this helped!

  • Flash player hanging up and crashing on all web browsers. Problem turned out to be AMD drivers

    I have been having a problem running Flash Player, green screens, hang ups, crashes etc on my machine. I tried various solutions and every major and some not so major web browsers all to no avail. I tried reinstalling my windows 8.1 no good also tried running 8 and 7 all 64 versions. No go I came a cross a post about a problem with Flash and AMD that seems to recur every nown and then. I have a AMD HD 6670 1 gig GDDR5 PCI-E 2 card so I tried going back through AMD drivers untill I was able to get it to function properly. Finally I ended up using the driver from Dec 2013 13-12_win7_win8_64_dd_ccc_whql along with the AMD Media Codec Package from Aug 2012 12-8_vista_win7_win8_32-64_xcode Flash is now playing with no problems. I thought I would share the solution I used in case it might help others.
    Message was edited by: Rodger Hall

    I haven't run across this, though I did see a Firefox fileupload bug yesterday (https://bugbase.adobe.com/index.cfm?event=bug&id=2980517).  Would you mind opening a new bug on this over at bugbase.adobe.com?  Please include URLs where you're seeing this behavior and we'll investigate further.
    Thanks,
    Chris

  • SBS 2008 'Set up your Internet address" crashes (Problem Event Name:_CLR20r3)

    Hello.
    We try Set up your Internet address and after wizard start we get:Description:
      Stopped working
    Problem signature:
      Problem Event Name:    CLR20r3
      Problem Signature 01:    dpcw.exe
      Problem Signature 02:    6.0.5601.8538
      Problem Signature 03:    4d24e2a5
      Problem Signature 04:    mscorlib
      Problem Signature 05:    2.0.0.0
      Problem Signature 06:    53a11b76
      Problem Signature 07:    20cd
      Problem Signature 08:    143
      Problem Signature 09:    N3CTRYE2KN3C34SGL4ZQYRBFTE4M13NB
      OS Version:    6.0.6002.2.2.0.305.9
      Locale ID:    1032
    Read our privacy statement:
      http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
    At DPCW.log from C:\Program Files\Windows Small Business Server\Logs we get:
    [7452] 150222.193429.5196: General: Initializing...C:\Program Files\Windows Small Business Server\Bin\DPCW.exe
    [7452] 150222.193429.7166: CoreNet: Retrieving LastBasicConfigSuccessful flag from registry
    [7452] 150222.193429.7196: CoreNet: LastBasicConfigSuccessful found.
    [7452] 150222.193430.3966: CoreNet: Retrieving Domain Name Max Length from NetworkConfig
    [7452] 150222.193431.8486: WizardChainEngine Next Clicked: Going to page {0}.: Networking.Wizards.NetSvcWizard.DoYouOwnDomainPage
    [7452] 150222.193438.4016: WizardChainEngine Next Clicked: Going to page {0}.: Networking.Wizards.NetSvcWizard.DoYouWantToTransferPage
    [7452] 150222.193442.9856: WizardChainEngine Next Clicked: Going to page {0}.: Networking.Wizards.NetSvcWizard.ChooseDomainNamePage
    [7164] 150222.193443.0066: CoreNet: Retrieving MS Domain Referral Service URL from NetworkConfig
    [7164] 150222.193443.0076: CoreNet: No MS Domain Referral service URL is defined in NetworkConfig
    [7164] 150222.193444.4326: CoreNet: Retrieving extra domain registrar from NetworkConfig
    [7164] 150222.193444.4326: CoreNet: No extra registrar information defined in NetworkConfig
    [7164] 150222.193444.4326: NetworkingServices: Initializing Available TLDs returned success.
    [7452] 150222.193624.7756: Wizard: WizardChainEngine Back clicked: Going to page Networking.Wizards.NetSvcWizard.DoYouWantToTransferPage.
    [7452] 150222.193626.6296: WizardChainEngine Next Clicked: Going to page {0}.: Networking.Wizards.NetSvcWizard.ProvidLoginInfomationPage
    [7452] 150222.193629.0626: CoreNet: Getting root cert
    [7452] 150222.193629.1216: CoreNet: CA ConfigString: XXXXXXX.XXXXXXX.local\XXXXXXX-CA
    [7452] 150222.193629.1696: CoreNet: CA ConfigString: XXXXXXX.XXXXXXX.local\XXXXXXX-CA
    [7452] 150222.193629.1786: CoreNet: Converting to bytes
    [7452] 150222.193629.1806: CoreNet: Leaf Cert Thumbprint is: EBB212D525E9D0C34B1C50870A50B372FF781FC8
    [7452] 150222.193629.1836: CoreNet: ThumbPrint: EBB212D525E9D0C34B1C50870A50B372FF781FC8
    [7452] 150222.193629.1836: CoreNet: Look for cert in My
    [7452] 150222.193629.1846: CoreNet: Opening Store
    [7452] 150222.193629.1856: CoreNet: Finding cert
    [7452] 150222.193629.1866: CoreNet: certcoll.Count: 1
    [7452] 150222.193629.1866: CoreNet: Closing Store
    [7452] 150222.193629.1876: Wizard: WizardChainEngine Next Clicked: Last page, so the wizard isdone, closing wizard frame and returning
    [7164] 150222.193629.5556: AdminTME: AdminDataLink Running Task: CommitterSequenceTask
    [7164] 150222.193629.6636: CoreNet: Deleting Domain Config Url from registry
    [7164] 150222.193629.6656: CoreNet: Deleting domain provider homepage Url from registry
    [7164] 150222.193629.6666: CoreNet: Deleting domain provider name from registry
    [7164] 150222.193629.6666: CoreNet: Deleting domain provider logo from registry
    [7164] 150222.193629.6716: CoreNet: Deleting provider service data 1 from registry.
    [7164] 150222.193629.6726: CoreNet: Deleting provider service data 2 from registry.
    [7164] 150222.193629.6826: CoreNet: CommonName: remote.impantokratoros.gr
    [7164] 150222.193629.6866: CoreNet: CN to validate: CN=remote.XXXXXXX.gr,
    [7164] 150222.193629.7116: CoreNet: Returning CN of CN=remote.XXXXXXX.gr,
    [7164] 150222.193629.7116: CoreNet: sCommonName: CN=remote.XXXXXXX.gr,
    [7164] 150222.193629.7246: CoreNet: Creating Request
    [7164] 150222.193629.7256: CoreNet: CA Name is: XXXXXXX-XXXXXXX-CA
    [7164] 150222.193629.7256: CoreNet: CA Name: XXXXXXX-XXXXXXX-CA
    [7164] 150222.193631.2636: CoreNet: Submitting Request
    [7164] 150222.193631.2756: CoreNet: CA ConfigString: XXXXXXX.XXXXXXX.local\XXXXXXX-XXXXXXX-CA
    [7164] 150222.193631.4296: CoreNet: Certificate submission returned: 3
    [7164] 150222.193631.4316: CoreNet: Installing Certficate response from CA
    [7164] 150222.193631.4996: CoreNet: Writing Leaf Cert data to NetworkConfig
    [7164] 150222.193631.5006: CoreNet: Leaf Cert Thumbprint is: A5CD93F97B5993E132DFCD684C235C9E74212985
    [7164] 150222.193631.5016: CoreNet: ThumbPrint: A5CD93F97B5993E132DFCD684C235C9E74212985
    [7164] 150222.193631.5016: CoreNet: Look for cert in My
    [7164] 150222.193631.5016: CoreNet: Opening Store
    [7164] 150222.193631.5026: CoreNet: Finding cert
    [7164] 150222.193631.5026: CoreNet: certcoll.Count: 1
    [7164] 150222.193631.5026: CoreNet: Closing Store
    [7164] 150222.193631.5036: CoreNet: Creating AccessRule for NetworkServiceSid
    [7164] 150222.193631.8646: CoreNet: Using WMI QueryString: Select * From MicrosoftDNS_Zone Where Name="remote.XXXXXXX.gr"
    [7164] 150222.193632.2556: CoreNet: Using WMI QueryString: Select * From MicrosoftDNS_Zone Where Name="remote.XXXXXXX.gr"
    [7164] 150222.193632.4586: CoreNet: Using WMI QueryString: Select * From MicrosoftDNS_Zone Where Name="remote.XXXXXXX.gr"
    [7164] 150222.193632.4956: CoreNet: Retrieving internal NIC GUID from NetworkConfig
    [7164] 150222.193632.4966: CoreNet: Internal NIC GUID from NetworkConfig is d48df1d0-c548-4a06-8b59-ab71532be356
    [7164] 150222.193632.5506: CoreNet: Retreiving MAC Address of the NIC to ignore from InfoXmlConfig
    [7164] 150222.193632.5526: CoreNet: Loading info xml configuration from: C:\Program Files\Windows Small Business Server\Data\Info.xml
    [7164] 150222.193633.0686: CoreNet: No NICs to ignore in InfoXmlConfig
    [7164] 150222.193633.0686: CoreNet: Retrieving MAC Address of the NIC to ignore from NetworkConfig
    [7164] 150222.193633.0686: CoreNet: No NICs to ignore in NetworkConfig
    [7164] 150222.193634.0536: CoreNet: Added NIC: Local Area Connection
    [7164] 150222.193634.4646: CoreNet: Added NIC: Local Area Connection 2
    [7164] 150222.193634.7586: CoreNet: Local NIC GUID is d48df1d0-c548-4a06-8b59-ab71532be356
    [7164] 150222.193634.8236: CoreNet: Using WMI QueryString: Select * From MicrosoftDNS_AType Where ContainerName="remote.XXXXXXX.gr" and OwnerName="remote.XXXXXXX.gr" and IPAddress="192.168.10.2"
    [7164] 150222.193634.8236: CoreNet: WMI Scope: \\XXXXXXX\root\microsoftdns
    [7164] 150222.193634.8356: CoreNet: Found 0 resource records of type A
    [7164] 150222.193634.8676: CoreNet: CIFPD Succeded
    [7164] 150222.193634.9926: CoreNet: Leaf Cert Thumbprint is: A5CD93F97B5993E132DFCD684C235C9E74212985
    [7164] 150222.193634.9936: CoreNet: ThumbPrint: A5CD93F97B5993E132DFCD684C235C9E74212985
    [7164] 150222.193634.9946: CoreNet: Calling FindCert()
    [7164] 150222.193634.9946: CoreNet: ThumbPrint: A5CD93F97B5993E132DFCD684C235C9E74212985
    [7164] 150222.193634.9946: CoreNet: Look for cert in My
    [7164] 150222.193634.9946: CoreNet: Opening Store
    [7164] 150222.193634.9966: CoreNet: Finding cert
    [7164] 150222.193634.9966: CoreNet: certcoll.Count: 1
    [7164] 150222.193634.9966: CoreNet: Closing Store
    [7164] 150222.193634.9966: CoreNet: Getting Hash
    [7164] 150222.193635.2026: IISConfigLib: Enabling SSL with params: website name: SBS Web Applications, ipNumOfInterfaceToBindWithSsl: *, port: 443, host header:
    [7164] 150222.193635.3986: IISConfigLib: set binding information for website name: SBS Web Applications, ipNumOfInterfaceToBindTo: *, port: 80, host header: remote.impantokratoros.gr
    [7164] 150222.193635.4826: IISConfigLib: Enabling SSL with params: website name: SBS SharePoint, ipNumOfInterfaceToBindWithSsl: *, port: 987, host header:
    [7164] 150222.193650.4556: AdminTME: Status: TaskId = Networking.Wizards.NetSvcWizard.ConfigureWorkFromHomeWebsite, RootTaskId = Networking.Wizards.NetSvcWizard.ConfigureWorkFromHomeWebsite, Success: False, Warning: False, Continue: True, Message:
    [7452] 150222.193650.4816: AdminTME: Committer: Completed called
    [7452] 150222.193650.4956: Exception:
    An exception of type 'Type: System.NullReferenceException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred.
    Timestamp: 02/22/2015 19:36:50
    Message: Object reference not set to an instance of an object.
    Stack:    at Microsoft.SharePoint.Administration.SPPersistedObject..ctor(String name, SPPersistedObject parent, Guid id)
           at Microsoft.SharePoint.Administration.SPPersistedObject..ctor(String name, SPPersistedObject parent)
           at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject..ctor(String name, SPPersistedObject parent)
           at Microsoft.SharePoint.Administration.SPService..ctor(String name, SPFarm farm)
           at Microsoft.SharePoint.Administration.SPWebService..ctor(String name, SPFarm farm)
           at Microsoft.WindowsServerSolutions.Common.IWorker.WSSConfig.CWSSConfig.IsSiteGuidValid(Guid sharePointSiteId)
           at Microsoft.WindowsServerSolutions.Networking.Wizards.NetSvcWizard.TaskConfigureWorkFromHomeWebsite.Run(ITaskDataLink dataLink)
           at Microsoft.WindowsServerSolutions.TaskManagement.Admin.LightweightDataLink.Run(TaskId taskId, IAssemblyTask task, CompositeTask parentTask)
           at Microsoft.WindowsServerSolutions.TaskManagement.Admin.SequentialTask.Run(ITaskDataLink dataLink)
           at Microsoft.WindowsServerSolutions.TaskManagement.Admin.AdminDataLink.Run(TaskId taskId, IAssemblyTask task)
           at Microsoft.WindowsServerSolutions.TaskManagement.Admin.Committer.DoWork(Object sender, DoWorkEventArgs e)
           at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    We have change for security all the name of server and domain with XXXXXXX.
    Can someone help? We read all google results for that problem and we cant fix it..
    Thanks.

    Hi IntelcomGR,
    Would you please let us know current situation of this issue? Did you refer to Binu Kumar's suggestion and check SharePoint on the SBS server? Any find?
    I also suggest that you should run
    SBS BPA tool to check the status of the SBS server. Meanwhile, please run
    sfc /scannow command to scan all protected system files.
    If any update, please feel free to let us know.
    Bes regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • IPhoto 09 Book and Crashing Problems

    I've been running into significant problems while constructing a 100pg book within iPhoto 09 that came pre-installed on my macbook pro. To start, the issue seems to be only affiliated with the iphoto book function (calendars seem to work just fine).
    Here's what I'm experiencing:
    I was in the process of creating a 100pg book. I had approximately 80 pages constructed. During my last session, I constructed the remaining 20 pages, and then began the process to submit the file for printing. It had significant issues suggesting that there were problems throughout my book. When submitting for printing, it indicated I had a problem and needed to resolve it before submission. At this point, looking through the book in iphoto appears to work absolutely fine with no exclamation points of any type.
    As a troubleshooting step, I attempted to preview the file to a PDF. It had multiple errors and took a significant time to output because 20-or-so times, I had to click on a message indicating there was an error on a specific page.
    So, continuing on, the file output with various problems. I then attempted to adjust the pages that had the problems (replacing photos, etc). During this process iphoto crashed. Upon reopening iphoto, I was unable to access the book at all - iphoto would simply crash.
    In desperation, I restored the initial 80-page version. Now I've got that, and I certainly could go through the process of recreating the next 20 pages, but I wanted to verify that I wouldn't run into problems. In testing that, the crashing behavior is still present.
    Next, I renamed the iphoto library and allowed iphoto to create a new and blank library. I readded the 5200 photos that I am sifting through for the book. Attempted to create a new book, added the 5200 photos, and then, without even putting an image on a page, tried to remove a photo from the book listings. At this point, it crashes. This is a new library, new file, new import, and same crash.
    I've spent hours and hours and hours, and I'm no technological luddite. I am needing some solutions. Can anyone out there help me out?
    If need be, I could provide a detailed error log that the crash produces, but as it's pages and pages of info, I thought I'd wait until someone asks me for it.
    Thanks for your insights.
    -Cody

    1 - Apple does not have a problem - you do - this is a problem with your set up not with iPhoto
    2 - this is a user to user forum so addressing Apple here has no value
    3 - how are you previewing that fails - using the directions here - http://support.apple.com/kb/HT1040 ? How does the preview fail? BTW the fact that you can not create a preview is directly connected to your inability up upload and is connected to the problem with your system
    LN

  • I have reinstalled firefox only to find it will not connect to internet and sync problem , have forgotton id and passwords as none of the original works. So what to do now?

    I guess one day firefox will give error message and will disconnect internet. it is since 12 of Oct 2010. Since all trials failed I started with reinstalling but problem did not go away. What can I do to use Firefox. I am not sure of ID and Password.

    You can find the password and the sync key in the password manager on the computer where you originally created that sync account.<br />
    Look for:
    * chrome://weave (Mozilla Services Password)
    * chrome://weave (Mozilla Services Encryption Passphrase)

  • Photobucket site and other sites cause Firefox v19 to "freeze" and crash. All the time. Photobucket causes Firefox v19, to slow, then crash.

    If you view photos for an extended time, or open a few tabs, Photobucket will cause Firefox to slow down, eventually freeze, then crash. This only started occurring when I updated to Firefox v19.0. This freezing and blanking out of the entire screen image of Firefox will occur when another program, such as Windows mail, is loading at the same time. It also is occurring at random times for no reason. I've never experienced a problem such as this with Firefox or Mozilla, ever. Nothing is preventing this from happening. I have Vista Home Premium, SP2. Dell Inspiron 530s.

    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove your Photobucket cookies (save any pending work first). While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page. Does that help at all?

  • Internet and usb problems

    HelloI just bought a cb3-111 afew days ago, it worked great when I first brought it home but now a couple of problems have come to light.first of all i keep loosing internet connection, the wifi signal is full bars but it will just randomly loose internet even though the wifi is still connected and strong. Second, the usb ports connect and disconnect. Example, if I plug my phone into the usb port to charge it will connect then disconnect sometimes it will stay on for a while then disconnect and reconnect on its own. the same thing seems to happen with my thumb drive. I would greatly appreciate any help to resolve these problems

    morb,
    Check and make sure that you are using the most current build for your Chromebook. You can also try to run a powerwash on it to see if that fixes it.

  • I am connected to the internet and I close all tabs on the screen. Now I want to open a new tab, but Firefox opens a pop-up window stating"Firefox is already running, but not responding . To open a new window, you must first close the existing Firefox pr

    I am connected to the internet, but all tabs are closed. Now I want to open a new tab, But Firefox pops-up with "Firefox is already running, but not responding. To open a new window, you must first close the existing Firefox process, or restart your system". Does anyone here know how to fix this? Thank´s, BL.
    == This happened ==
    A few times a week

    Firefox is shutting down windows I want to remain open. Example: I am done viewing one window. I click the X to shut the window and it shuts two windows. Every single time, attempt to close one windows, two windows close. Lately, I have been opening several windows with nothing but google search, just so it will shut that window and not something else I want to remain open. I could understand this if I was using tabs, but I am not. This has been going on for over two weeks. I don't like going back to history to open a window, I did not want closed in the first place. Isn't that what 'Windows' is all about? Any ideas?

  • Does iLife '06 fix double thumbnail and crashing problem of iPhoto '05??

    I had nothing but trouble when I upgraded iLife last year from '04 to '05 - I have hated iPhoto ever since. After all the help from this sight, including un-installing and re-installing '05, I still have problems.
    Does anyone know if '06 is any better???? I am hoping it will solve all my problems.

    Melinda:
    Do your exported files contain a jpg extension? If so, select one and bring up the Info window, Command-I. In that window select Preview as the default application for that file and click on the Apply to all button. Now see if the exported files will open with Preview or other image viewing applications.

  • Firefox after v 8 hangs and crashes done all "firefox hangs" suggestions. Installed fresh java, flash, safemode, only thing that works is to return to v 8

    Last FF version that works flawless on my home rigis v8. From v9 on hangs pages, hangs entire computer, "not responding" for long periods of time. Have completed all the "firefox hangs" suggestions. Reinstalled clean, reinstalled clean flash, ran w/ new and w/o Java, safemode, hardware acceleration off, clean profiles... Only savior is to return to v 8. Same package of addons are loaded on other computers I have w/ no issues. Graphics drivers are up to date/ XP drivers and releases are up to date. Use the same settings for v8 and each that have updated since. Have set to not update in v8 but it constantly updates itself and begins the crash/hang cycles. Resources are using less the 20% cpu and ram when hanging is occurring.

    Last FF version that works flawless on my home rigis v8. From v9 on hangs pages, hangs entire computer, "not responding" for long periods of time. Have completed all the "firefox hangs" suggestions. Reinstalled clean, reinstalled clean flash, ran w/ new and w/o Java, safemode, hardware acceleration off, clean profiles... Only savior is to return to v 8. Same package of addons are loaded on other computers I have w/ no issues. Graphics drivers are up to date/ XP drivers and releases are up to date. Use the same settings for v8 and each that have updated since. Have set to not update in v8 but it constantly updates itself and begins the crash/hang cycles. Resources are using less the 20% cpu and ram when hanging is occurring.

  • Wireless internet and streaming problem

    I have bought an airport extreme several months ago. I must say I was happy in the beginning.
    I am currently disapointed in the router. I have numerous times a loss of signal. This is particularly anoying whem using spotify.
    I've tried router resets and both new and old firmware. I've upgraded both my iphone 4 s and ipad1 to the newest ios.
    Nothing seems to tackle the problem. Does anyone have another idea?
    Thanks Marcel

    Time to change channels.
    Hold down Alt key, and click on the WiFi icon. What channel is it currently set on?

  • I have a iPad and a iPod one (the ipad) I was preparing it for ios5 update then it gave me a error and crashed,did all apples bull nothing works now its barely staying charged with the iTunes logo on it not showing up at all on PC.

    NOW THE iPod its a 2nd Gen. I love those because the glass (plastic) doesn't break like the new ones but anyway. I let it die out as I was moving and its been tucked away needing a charge. I go to charge it and nothing a big paper weight. Pressed power and home did the works nothing is working ugghhhh Im tempted to say f@$#%#$ Apple???????????????????/

    Letting the battery get into a totally discharged state was probably not a good idea.  Apple didn't do it, you did.

  • Packet rate extremely high and crash my network

    ALL
    some of my tenant may have virus, or something, and let the packet rate to very high, and the traffic to internet, and crash the firewall also.
    what i can do for those trunk or switchport in order to lower the risk.
    i had try to stormcontrol broadcast to 2%, but seem not to the problem.

    I dont know if this is 100% relevant to your scenario but the link below
    http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_tech_note09186a0080110d17.shtml
    describes a mechanism to protect networks against the nimda virus.
    It uses QoS and CAR to achieve this.
    A more long term solution in your case would be to isolate each of the "tenants" on their individual private vlans in isolated mode and have the router in promiscuous mode which would limit the broadcasts between the hosts themseleves and create a one way channel between each host and the router. This is of course for those clients that do cause havoc on the network. The rest of them could remain in the same vlans :)
    Here is a link that might help
    http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a0080160a44.html
    HTH
    Arvind

  • Internet won't connect all of a sudden...

    One night I was on my internet, watching a baseball game, and everything was working perfectly. Then the next morning, I went to open my internet and it wouldn't connect. I checked the other two computers in the house (that are using the same AirPort) to make sure it wasn't just the internet, and they both were working fine. I checked my Network Status and the AirPort and AirPort Settings were both green but my Network Settings, ISP,Internet, and Server were all red. I changed my IP Address to match that of the desktop that was working and it changed my Network Settings to green, but now the ISP, Internet, and Server are still in the red. I called in for technical support to our Internet Provider and even they didn't know what was wrong. Has this ever happened to anyone? Does anyone know what I should do? Anything at this point would be appreciated.
    Thanks In Advance....

    Hi. I just received a Macbook myself, and I am having the exact same problems.
    I was wondering if anyone could help me as well.

Maybe you are looking for

  • Login Help - Login screen comes up but nothing happens when I hit "login"

    Hi, I am a total newbie to APEX and have limited experience with Oracle in general, so please, be kind ;) I am attempting to get APEX installed with 10g Express. I had installed 10g Express and it seemed to work fine. I went through the APEX install

  • How do I save an edited photo and put it into a Facebook album?

    I tried "saving for web" and saved the image as a JPEG, but as soon as I upload to Facebook half the picture is blacked out.. How do I stop this from happening?! Am I saving wrong?

  • Which user id is used in each data source?

    Using SQ: SSRS 2008 R2 - Beginner - Is there a report or query that provides which user ID is associated with the data source of each report? I need to be able to list out all the data sources being used and which user id is being used in the data so

  • Throw difference exception in constructor

    Have a base class constructor that throws an exception of class XException Have an exception class YException that inherit exception XException If I inherit the base class, can I make it throw exception Y instead of X, since Y is a subclass of except

  • View contacts by company

    Is there any way I can view all my contacts by company in the native Mac Contacts program?  I can only see options to view by first or last name...