Xperia Transfer Desktop fail to transfer non-media content

"Xperia transfer" is not able to transfer any data content(call log, messages etc). But just media content, which can be done even without this software
If media is selected, it tells it can't transfer following contents
If only my data is selected, as in above pic, it give strange misleading error
Now why on earth, this software should be used? Transfer was needed from WT19 to Xperia E4g

@farjad
Here are some alternatives
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

11.1.3 (8) iTunes fails to transfer newest music tracks to iPhone 4

For the past few days, I noticed that my version of iTunes 11.1.3 (8) fails to transfer my newest music tracks, which I imported into my MacBook's Itunes in the past week, to my 2011 iPhone 4.
Both my MacBook's and iPhone's software appear to be up to date; I tried to restart, sync and re-sync with playlist boxes I unticked and ticked again, my most recent tracks appear in grey in the 'in this iPhone' music directory when I connect my iPhone to my MacBook,
but each time I try to find these tracks in my iPhone's iTunes library, none of them appears!
I finally disabled my iPhone's 'sync over with wifi' box, hoping it would really transfer the tracks immediately during the sync process but it simply doesn't make any difference.
Therefore I don't know what to do next...
HELP & TIPS WELCOME!

No need to scream at me.
You can access the apps by clicking the iPad thingy on top right of the screen (when the iPad is connected) and then select Apps and scroll down to file sharing apps...
Or....
As I said....
EXACT SAME WAY AS BEFORE

AIA FP 11.1.1.6.0 "Metadata transfer operation failed"

Hi,
I wonder if anyone can help. I am receiving the error below while performing a fresh install of AIA FP 11.1.1.6.0
"Metadata transfer operation failed" MDS-00597 failure to open the archive file /tmp/archive4766411343835100171.jar
Sure the above error points to a non-existent file but where do I get this file from? The directory is not write protected and the user performing the installation can write to that
directory. Also, there is adequate memory so I don't think its a system resource issue.
It is important to note that this error appears at the "Deploy Application Configurations" stage of the install.
System Info
Weblogic 10.3.6.0
SOA 11.1.1.6.0
OER 11.1.1.6.0
Oracle Database XE 10.2.0.1.0
[exec] soa_server1
[exec] Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
[exec] For more help, use help(domainRuntime)
[exec]
[exec] Uploading metadata to server . . . . .
[exec] Metadata tranfer operation failed
[exec]
[exec] This Exception occurred at .
[exec] javax.management.MBeanException: MDS-00597: Failure to open the archive file /tmp/archive4766411343835100171.jar. Cannot create ArchiveMetadataStore for the archive file /tmp/archive4766411343835100171.jar.
[exec] error in opening zip file
[exec] Problem invoking WLST - Traceback (innermost last):
[exec] File "/home/oracle/Oracle/Middleware/AIA/Infrastructure/Install/AID/lib/py/updateMetadata.py", line 53, in ?
[exec] at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[exec] at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
[exec] at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[exec] at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
[exec]
[exec] java.lang.Exception: java.lang.Exception: Error!!! Import MetaData Failed !!
[exec]
BUILD FAILED
/home/oracle/Oracle/Middleware/AIA/Infrastructure/Install/AID/AIAExecuteDriver.xml:222: The following error occurred while executing this line:
/home/oracle/Oracle/Middleware/AIA/Infrastructure/Install/AID/AIAExecuteDriver.xml:65: The following error occurred while executing this line:
/home/oracle/Oracle/Middleware/AIA/aia_instances/AIA/tmp/AIDExecuteDP_temp_1380328407.xml:94: The following error occurred while executing this line:
/home/oracle/Oracle/Middleware/AIA/Infrastructure/Install/AID/lib/AIDConfigurationLibraryTasks.xml:845: exec returned: 1
Total time: 5 minutes 27 seconds
Deployment Command Return Value Configuration: 1

You will face this issue when something goes wrong with SOA server.. your SOA server must be in running status..
Edited by: 945735 on 09-Aug-2012 03:43

Every movie purchase through iTunes fails to transfer to my iPhone or iPad and the message I get is this: some of the items in the itunes library, including were not copied to the ipad because you are not authorized for them on this computer... help?

For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
Thanks.

Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

Payroll to FI posting error message - Document Transfer has Failed

Hello experts,
We recently received the following error message when posting Payroll results to FI. This was not done using any process models.
'Document Transfer has Failed'
Does anyone know why it's coming up and more importantly, how to correct it? I looked and found an SNote: 1240870 but that seems to apply to 3PR issues not FI posting.
Anyone else had this error before? How do I correct this? Please help as this error needs to be corrected as soon as possible since FI will be closing the month of November soon.
Thanks,
Suparna

Hi,
http://help.sap.com/saphelp_dimp50/helpdata/en/81/42b1884a3711d189490000e8323c4f/content.htm
The posting run has the status Document transfer has failed. Posting to Accounting did not take place.
Depending on the error that occurred, it may be a good idea to start posting this posting run once again. If the error still occurs and it is not possible to post the posting run, you must delete the posting run and create a new one.
Thanks
Umakanth

Transfer posting between 2 StorLoc (Non HUM managed to HUM managed), MB1B

Hi,
I'm trying to figure out if after MB1B transfer posting (311 movement) an inbound delivery will be created automatically for the receiving StorLoc. This is for transfer of materials from a Non HUM StorLoc to a HUM StorLoc.
If a inbound delivery can be created automatically what costomizing steps do I have to do?
Thanks for you help.
Regards,
Alexander

Hi,
Check following link
can any body send HUM configuration settings
Thanks
Diwakar

Transfer ID failed with LUM errors

I have 4 netware servers to migrate to OES2. One was completed successfully using Transfer id a few weeks ago. This weekend I attempted another.
The last part of the transfer id failed with LUM errors that it couldnt access lum objects admingroup, www etc. As we have had one successful migration these objects do exist in the tree and are lum enabled. The /etc/nam.conf was modified prior to starting the transfer id to point to the ldap server with the master replica. I did create too many projects which I think caused me the lum errors which I couldn't get past. With the source server turned off I followed a TID dated 2009 for this LUM error and modified the unix object which had been created to be members of the groups it required, (luckily I had the previously migrated server unix object to compare to) quit the migration software and rebooted the server and then ran ndsrepair. No errors. I did not migrate any services.
Further investigation revealed errors relating to obtaining the SSLCert but it has not expired and despite the cant get it messages the files .der and .pem appeared in the correct folders on the target server. I did copy the .der file to the required location naming it with the ipaddress as per manual instructions. The target server now has a case of dual identity. The nss volumes are mounted ok and the users can map drives using the source server name but the Suse Linux server still thinks that its the pre-migration server when I run a terminal session. Ifconfig shows the correct source server ip. Consoleone is another story. The volume objects are the old ones and the new ones with pools are not showing. From the users viewpoint it works.
Before I do more damage can someone please point me in the right direction. The target name did change to the source before the restart so therefore I should just need to do the hostname rename manually. Should I start at step 7 in the manual instructions in an attempt to fix this server or should I abandon it and start again?

$(UKevin
This defect will make into the next OES2SP2 Patch (post September). We didn't have enough time for QA to regress the fix for September Patch.
-Ramesh
>>>
From:
kjhurni<[email protected]>
To:
novell.support.open-enterprise-server.migration
Date:
10/05/2010 09:06 PM
Subject:
Re: Transfer ID failed with LUM errors
Great, thanks!
As I mentioned previously, we DID find a bug about 3 weeks ago with LUM
repairfailing during the "group" (admingroup). We do have a field
patch for it, but obviously it's not made it into the channel yet.
So if you DO still have that problem, you should probably ask for the
patch (it's one file).
The defect #635574
Should help them reference the bug and get the patch for you.
I'm not sure when it will be released into the patch channel.
Not to say this fixes any and all LUM problems but since we have that
patch, we've not had any issues with the remaining OES2 SP2 64-bit
servers we've done with ID Transfer.
kjhurni
kjhurni's Profile: http://forums.novell.com/member.php?userid=734
View this thread: http://forums.novell.com/showthread.php?t=422454

"Failed to transfer due to internal error" in AC

I am running CCM 4.1(2)
I have several receptionists that use attendant console. When anyone of the receptionists log into AC call control comes up. When they try to transfer to users in the directory they all get the "Failed to transfer due to internal error" I can't find this error anywhere. I don't know how to correct this issue. Any ideas?
Thanks

I suppose that beside CCM 4.1(2) you are using AC 1.4 (1), if yes, then you need to upgrade to AC 1.4 (1) ES11 or upgrade at least to CCM 4.1(3)ES42 or CCM 4.1(3) sr3c
HTH
//Jorge

Billing Document fails on Transfer to Accounting

Hi Gurus.
I have created a Sales Order for a BP with Direct Billing.
The Billling Document created is failing to Transfer, when I review the Billing Document I see it has an error on Middeware Connection Status: "C": "Error Constructing Tax Data for mBDoc"
I do not specialize in Tax configuration. How do I correct this so that my Bdoc can get created.
Many Thanks in advance
Panduranga

Hi
Please can you tell us how did you resolve the error , we have around 50+docs stuck with same error
Could you please share the answer with detailed screenshots
regards
devendra

Billing document fails to transfer

Hi all! For some reasons, the billing document created in CRM failed to transfer to the ECC system. It ends up with error 'No revenue account determined for bill doc 9xxxxxxxx Item 10 Condition Type xxxx'. However, when I checked the configuration (for Enhanced Revenue Determination), the conditions are in place. When I checked the Account Determination Analysis message for the invoice, it also shows that the condition record does not exist. This is really weird. Does anyone has any idea what else I can look at?
Cheers!
SF

Hi,
This error generally occurs when there is no G/L account assigned to the condition type which is used in the pricing procedure.
Pls goto spro path:Customer Relationship Management -->Billing -->Integration -->Transfer of Billing Documents to Accounting -->Transfer to Accounts Receivable (FI-AR) and Accounts Payable (FI-AP) -->Assign Revenue Accounts for Sales Transactions OR Assign Revenue Accounts for Service Processes (depending on which scenario you are using).
Check for the organisation that is determined in the transaction whether G/L accounti s maintained for that particular cond type displayed in the error message.If not maintain it and transfer the invoice document.
Regards,
PP

How do I transfer desktop Sticky note to a Mailbox?

How do I transfer desktop Sticky note to a Mailbox? Dragging doesn't work.
I'd also like to know how to do a similar move between Finder and the Desktop.
Thanks!

The only practical way I can think of to transfer a note from Stickies to a mailbox would be to copy it, paste it into a new mail message, and mail it to yourself and then file that message in the desired mailbox.
I'm not sure what you mean when you say a "similar move between Finder and the Desktop". The Desktop is just a folder within Finder, and to move a file from one folder to another you just drag it. So you may need to elaborate on what it is you wish to accomplish here.
Regards.

Stock transfer between Excise Plant and Non Excise Plant

Scenario : Stock is imported from say Singapore. One of the import duties can be claimed back as CVD and pass the benefit to customer.
Requirement : Stock transfer between Excise Plant and Non Excise Plant
Question : i) If I do stock transfer from Excise plant to non-excise plant, can I transfer the CVD amount which I captured in RG23A - Part1/Part 2?
ii) If I do stock transfer from Non- Excise plant to Excise plant, can I get the benefit of CVD and pass on that benefit to customer?
Pls let me know the possiblity of above two in SAP and Legally?
thanks in advance
Sridevi

Ok! Thanks for the replies. Pls let me allow to elaborate the earlier requirement.
Trading Goods say A gets imported to India. Issue was :
1) We need to issue Excise invoice only to few customers. So, we thought of treating one batch as excise batch and remaining as non excise batch per day.
2) Stock price varies every day being batch wise produced in say Singapore.
Means Mateiral is A but price varies evey day and because of the duty payment also gets varied. For a single material master we do have different prices for each batch and also excise/non excise scenario. So, how can I get material value for each of this combinations in the system and how to identify the same.
Because of the above reasons, we thought of having two plants. I can not configure depot here because cleint requires single plant for each state as of now.
Am I clear? If not, pls let me know,
regards
Sridevi

HT204350 New Macbook Pro bought December 2013. Transferred everything from Timemachine backup from Macbook Air with 10.6.8. Failed to transfer "network settings". PROBLEM: neither account can log in. It shakes and refuses (the correct) password. Help

New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!!

New Macbook Pro bought December 2013. T
ransferred everything from Timemachine backup from Macbook Air with 10.6.8.
Failed to transfer "network settings".
PROBLEM: the two accounts from the Macbook Air cannot log in. It shakes and refuses (the correct) password.
Cannot redo the setup.
Stuck! (With a dead as a doorknob $3000 machine.)
Help!!

Error 0x80004002 - when trying to transfer an audio book from OverDrive Media Console

I am getting this error message - Error 0x80004002 - when trying to transfer an audio book from OverDrive Media Console. It was working a couple of weeks ago. It keeps telling me to downloan iTune9.0.2 (or newer) but I have the most up to date version of iTunes. Also tells me the device is not connected, but it is.

The publisher of the book seems to have restricted copying of the book on to other devices. Contact the book distributor.

Failed to Transfer Themes

Hey guys,
I recently bought a new Macbook Pro with Mountain Lion. Obviously having heard that Mountain Lion no longer came with iDVD, I made sure to copy it over from my old Macbook Pro before I sold it off. To my disappointment, when I went to open the program it asked to find the themes which I apparently failed to transfer over. Is there anywhere to download them?
I already ran the most recent software update (7.1.2) and that didn't help

The themes are located in the HD/Library/Application Support/iDVD folder on your old Mac. Copy them to the same folder on your new Mac, repair disk permissions, reboot, launch iDVD and try to select a theme.
If you don't have access to the original theme folders download the iDVD 7.0.1 updagter and run it. If it does not install the themes then download and use Pacifist to install the Applicattion Support folder components for the updater package.
OT

Xperia Transfer Desktop fail to transfer non-media content

Similar Messages

Maybe you are looking for