Xperia U Firmware or Roms for Locked Bootloader

Ics is very bad, I want to install any other custom firmware or rom on my phone, but is there any for locked Bootloader ?
Nothing is True, Everything is Permitted

I'm moving your thread to Android development. Hopefully you get some response there instead.
What are your thoughts about this forum? Let us know by doing this short survey.

Similar Messages

Will this software root Xperia Z1 C6902 with locked bootloader in lollipop update in 14.5.A.0.242?

Here is the link...http://www.oneclickroot.com/device/sony-xperia-z1-lollipop/
Please advice me will this root lollipop?
Also Will updating from kitkat to lolipop wipe my phone's internal memory?

To have LP rooted you 1st need to have KK installed and rooted which can be done with a locked bootloader then install a custom recovery like Teamwin then from within that you can flash a pre-rooted LP Rom - Tried and tested by me personally but my opinion is KK is better and smoother but this is my opinion - other members may and will say differently
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Custom roms for xperia p

can anyone suggest the best rom for xperia p that provides good battery life and smooth interface.and can i unroot and go back to stock rom when desired ?

*Moved to Android development*
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Where is the official ROM for S650 and instructions

Hi,
1. Where can I find the official stock rom for the S650 and instructions on flashing, in case something goes wrong and I need to reflash the phone.There doesn't seem to be anything on the Lenovo website other than the source code.
I saw the this link http://www.needrom.com/download/lenovo-s650-vibeui-2-0-2/. But its not an official Lenovo website and it says developer version.
2. Is there an AOSP port or Cynogen etc for the S650?
Thanks.
Solved!
Go to Solution.

Hi
1.I can guarantee that THIS is 100% official ROW (after flashing this you can OTA update to the latest available ROW firmware).
2.HERE you can find S650 AOSP/MIUI/LeWA ,etc ports (use google translate)
See message 7 of http://forums.lenovo.com/t5/Lenovo-Phones/Lenove-S650-sound-issue/m-p/1413747#M3660 for flashing instructions(Flash Tool V3/V5).
Hope it helps
Cheers.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Could not updated firmware 40.0 for nokia 5800

Hi,
I tried updating the firmware of my nokia5800 using ovi suite.
1. Ovi suite showed an option New firmware available 40.0 , Install
2. On click , it downloaded some 122 mb file
3. Install process started, it said it ll take about 15 minutes to complete
4. My phone restarted after few minutes
5. In OVI suite, Your firmware is successfully updated message displayed
But when I check my mobile, it is still in 30.0 version, I checked my product code also, firmware is available for this product code.
I am using Windows 7 and latest version ovi (2.1.1.1)
Please help

I would suggest using the Nokia Software Updater (NSU) instead of the Ovi Suite. Ovi, I feel is not matured enough, and so is Win 7.
My suggestion:
- Use a PC running WinXP (I strongly advise against using Vista) and insatll the latest PC Suite and NSU.
- Back up your data
- Soft reset your phone (Type *#7370#, enter lock code when prompted)
- Make sure you have a full battery and a good internet connection on the PC, then run NSU with the phone connected in PC Suite mode using the USB Cable.
- Wait patiently until it finishes.
- Once completed, restore the backup.
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Statement for Lock and Unlock an Oracle user (Urgent)

Hi DBAs.
I just want to know about the statement used for lock and unlock the Oracle user thru sysdba suer.
Thanks
Hassan

Hey,
SQL> alter user <USERNAME> account lock;
and
SQL> alter user <USERNAME> account unlock;
Cheers,
Marcello M.
Sorry Justin, same answer........
Message was edited by:
Marcello M.

HELP!!!! My n73 is asking for Lock code..

Please help me! My n73 is asking for Lock code, but it doesnt accept my private code which i usually used... how can I reformat my phone manually? i am a media and my phone is very necessity to me... please help me...

The default security code is 12345. If would be something else if you have changed it but try it anyway.
If it doesn't work then your only option in your local Nokia Care Centre. Remember to bring the receipt or any other proof of purchase with you.

Can't get Firefox to load at all after trying fixes from support web site. Have checked for lock file, processes running, reboot, reinstall. NO JOY.

I'm running Vista for operating system on an HP laptop that's about 2 years old. I've installed all current updates.
I've always used Firefox. It started crashing and creating processes but not launching. Went to support and scoped it out -- there was a lock file my profile directory. I deleted it, and Firefox started loading.
Used it a few times -- closed the app each time on exist as per suggestions on support site info. One time -- back to square one, wouldn't load, just created a process. Reboot, ending process, checking for lock file, reinstalling -- all unsucessful.

Brian
Below is from using a SIP build. It does offer G722, but it's way down on the list so it's never used...
m=audio 32678 RTP/AVP 0 8 18 102 9 116 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:102 L16/16000
a=rtpmap:9 G722/8000
a=rtpmap:116 iLBC/8000
a=fmtp:116 mode=20
a=rtpmap:101 telephone-event/8000
Taking Sreekanth's suggestion to try a Skinny build, I get the following when I make a call. It offers codecs in the order I SET THEM AND ONLY THE CODECS I SET! YAY!
m=audio 19374 RTP/AVP 9 0 101
a=rtpmap:9 G722/8000
a=fmtp:9 bitrate=64
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
Using a Skinny build on the phones also solved other issues. The phones use G711 when the whole path supports G711 and G722 when the whole path supports G722. It doesn't always use G722 and rely on transcoding for the call paths that can't use it. It's fantastic.. The phones also receive the QoS tagging that I set and that seems to result in better audio quality than on the SIP builds, which never did get those settings. Finally, it even solved a slow Exchange 2013 answer issue I have been experiencing for quite some time. I practically fell out of my chair when I saw everything that was fixed just by switching...
Cisco, PLEASE FIX YOUR SIP BUILDS! It's insane how the SCCP builds work perfectly and the SIP builds don't, especially with how much these phones cost.. I was thinking of possibly acquiring some 9951s, which are SIP only. I'm a little leery about that at this point. If they have the same kinds of issues as the SIP builds for the 7975g, there's no SCCP alternative to use..
Sreekanth
Thank you for suggesting a Skinny build.. That was about the only thing I didn't try. I am happy beyond belief that this is working so well now, even though the SIP builds should be just as well developed as the SCCP ones.

Cd-rom for Mac and Windows

Hi there,
I want to make an hybrid cd-rom for both, Mac and Windows, and I am using the fscommand code in the first frame of my actions:
fscommand("fullscreen","false"); // returns the player to normal menu view.
fscommand("allowscale","false"); //sets the player so that the SWF file is always drawn at its original size and never scaled.
I want both commands with their properties, however the displayState property is new to me. Please, Could you help me to do the same with this?.
Of course all in AS3.
I also have a code for a button that closes the .app of the .exe:
function cerrar(e:MouseEvent):void {
fscommand("quit");
cerrar_btn.addEventListener(MouseEvent.CLICK, cerrar);
Thanks in advance.

The stage displayState and scale properties are like so:
// fullscreen
stage.displayState = StageDisplayState.FULL_SCREEN;
// fullscreen with keyboard active
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
// non-fullscreen
stage.displayState = StageDisplayState.NORMAL;
Note that changing the displayState is usually done after the first frame is rendered so adding in a listener for that before changing it is a good idea. The scale and align don't require this.
e.g.
addEventListener(Event.ENTER_FRAME, _onEF);
function _onEF(e:Event):void
     // frame has rendered, remove listener
     removeEventListener(Event.ENTER_FRAME, _onEF);
     // change display state
     stage.displayStage = StageDisplayState.FULL_SCREEN;
Speaking of align, if you use NO_SCALE and expect to resize, you'll probably want to anchor the resizing from the upper left, like so:
// top left registration
stage.align = StageAlign.TOP_LEFT;
Otherwise upon resize the upper left pixel will actually go into negative numbers.
Scaling is:
// no scale
stage.scaleMode = StageScaleMode.NO_SCALE;
// scale to fit exactly (aspect not maintained)
stage.scaleMode = StageScaleMode.EXACT_FIT;
// scale but maintain aspect:
stage.scaleMode = StageScaleMode.NO_BORDER;
Exiting a projector, still the same..
import flash.system.fscommand;
cerrar_btn.addEventListener(MouseEvent.CLICK, cerrar);
function cerrar(e:MouseEvent):void
     fscommand("quit");

Bug in new firmware 7.0 for 6300 cannot create per...

There is bug in new firmware 7.0 for nokia 6300 and maybe all 40 series.
I am not able to create access point which is necessary to access internet with java applications.
When I go Settings -> Configuration -> Personal config.sett. -> Add -> Access point (but also if I choose any other from list)
Then i go back and there is no new access point. In previous version of firmware it created access point.
Do anyone know about this issue ?
How can I tell to Nokia support that there is this bug ?
thanx for replies

I went to local Nokia service, and they told me that probably it was wrongly flashed. So I reinstalled firmware two more time, but it always have the same problem. Is there someone with 6300 that have the newest firmware and can test this ?
thank you
I will put this phone to service and see what they will do.

Is there any limitation of firmware or hardware for QoS configuration (4400 controller & 1252 AP's)

Hi Experts,
Before proceeding for adding AP model 1131 and 1252 into my set-up , I need to know whether any limitation of firmware or hardware for QoS configuration in wireless set-up .
I have 4400 controller and 1130 & 1250 AP models.

Hi Vinod,
Since you have 4400 controllers, you can run upto WLC 7.0.x code. Refer this for more detail
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
there is no specific limitation to 1131/1252 AP model as such, everything is WLC software dependent.
From later software 7.4.x,7.6.x,8.x, lots of improvement for QoS configuration & bandwidth control, but since your controller is old hardware, you cannot have those latest features.
here is a reference post on how QoS works in wireless environment
http://mrncciew.com/2012/11/28/understanding-wireless-qos-part-1/
HTH
Rasika
*** Pls rate all useful responses ****

I have a serial number from the CD Rom for Lightroom 5 but I can't use the serial number to license the software I downloaded online.

Hi,
I've recieved a free Adobe CD Rom for Adobe Lightroom 5 after buying a new Samsung Camera,
as I do not have a CD Rom department in my laptop, I've downloaded the Adobe Lightroom online.
After downloading, I was trying to license the software by the given serial number at the CD Rom, however it doesn't work.
Please kindly assist.

What exactly means "can't use" or "doesn't work"?
What is your operating system? Is the serial number on the package for Mac or Windows?

Nokia x3 help! menu button works for lock but not ...

i have a new nokia x3, around 2 months old, after restarting the phone one time, the main button (the menu button) works for locking/unlocking and even makes the keytone sound when you press it, but i cant open up the menu, its really annoying because without the menu i cannot access the phone!
i can still make calls/text messages, but i really want to fix this.
thanks in advance

just to clarify, the menu button works such as when i slide the phone closed, the 'lock' option appears, and the button works then, but when i unlock, i goes back to the usual 'menu' option which just doesnt work.
i can use text/calls from the shortcut buttons such as left/down/right and some buttons work on in certain places, such as when the 'send' option appears for sending a text.
i have tried to soft reset using the code, before, and i have tried restarting it.
none of them worked, does anyone have a solution, also does anyone know the hard reset code?
thanks in advance.

Need Original BIOS Rom for Lenovo g565 (Mod.4385)

Messed my BIOS up, with a 560 BIOS (i know my own fault!) and need a original rom for recovery.
where to download?

the official download page doesn't have any bios update but i found one above. but, due to it's not official bios update, it may void the warraty and can brick the mainboard, use it on your own risk.
http://www.bios-mods.com/forum/Thread-Removed-Lenovo-G565-BIOS-Insyde-H2O-edit-Whitelist-or-remove-i...

ORA-02049: timeout: distributed transaction waiting for lock

Hi,
My name is Guneet and I'm working on an application running on BEA Weblogic Server 9.2 running on a Red Hat Linux box using Oracle 10g as the database. My problem is that recently our code started getting the following exception while updating a database table.
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-02049: timeout: distributed transaction waiting for lock
Application Details
* Using Stateless Session EJB
* Only one Business method in this EJB with transaction attribute set to "required"
* This method executes two select queries & one update query
* We are using JDBC to access the database.
* We have configured a Data Source & are using it to get a database connection.
* Weblogic's Oracle Driver is being used.
More details
* The application has been running well since a month.
* Two days ago,the update query failed with the above error.
* At that time, a single client was accessing the system.
* Once this problem occurs, it starts appearing frequently.
* Eventually a request to get a connection from the Data Source times out & the exception copied at the end is thrown
* At this stage the application gets stuck and all requests trying to get a connection end up with this exception.
* Fortunately, Restarting the Weblogic Server gets us out of this problem and transactions resume normally.
Now my questions are
# Why is this error happening & what does it mean?
# It looks like the second exception (unable to get a connection from ds) is an after effect of the first problem (ORA-02049) once it appears for a couple of times. Can somebody validate this?
# Though I don't understand JTA well but I don't think this application needs distributed transactions so, I'm thinking of modifying the driver type to non-XA oracle driver. Any advise/pointers/comments on this front is welcome !!!!!!!!
Thanks
Guneet Sahai
Exception Trace
Dec 27, 2006 4:47:50 PM | com.gisil.themis.db | SEVERE | Unable to load merchant DEL = 911168900164. Reason - java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMERR start() failed on resource 'themis-ds': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException: Unexpected error during start for XAResource 'themis-ds': Transaction timed out after 29 seconds
BEA1-252DE51AC930078CA638
at weblogic.jdbc.wrapper.XA.createException(XA.java:103)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:753)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1182)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1115)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:274)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:497)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:429)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1408)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1413)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

guneet sahai wrote:
Hi,
My name is Guneet and I'm working on an application running on BEA Weblogic Server 9.2 running on a Red Hat Linux box using Oracle 10g as the database. My problem is that recently our code started getting the following exception while updating a database table.
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-02049: timeout: distributed transaction waiting for lock
Application Details
* Using Stateless Session EJB
* Only one Business method in this EJB with transaction attribute set to "required"
* This method executes two select queries & one update query
* We are using JDBC to access the database.
* We have configured a Data Source & are using it to get a database connection.
* Weblogic's Oracle Driver is being used.
More details
* The application has been running well since a month.
* Two days ago,the update query failed with the above error.
* At that time, a single client was accessing the system.
* Once this problem occurs, it starts appearing frequently.
* Eventually a request to get a connection from the Data Source times out & the exception copied at the end is thrown
* At this stage the application gets stuck and all requests trying to get a connection end up with this exception.
* Fortunately, Restarting the Weblogic Server gets us out of this problem and transactions resume normally.
Now my questions are
# Why is this error happening & what does it mean?
# It looks like the second exception (unable to get a connection from ds) is an after effect of the first problem (ORA-02049) once it appears for a couple of times. Can somebody validate this?
# Though I don't understand JTA well but I don't think this application needs distributed transactions so, I'm thinking of modifying the driver type to non-XA oracle driver. Any advise/pointers/comments on this front is welcome !!!!!!!!
Thanks
Guneet SahaiHi Guneet. If you want to debug the JTA issue, I suggest opening an official
support case. They will lead you through producing the JTA debug information.
However, I believe you are correct that the transaction you describe is
completely doable with a simple local transaction, so if you were to alter
your pool to use the non-XA driver, it would probably be faster, simpler,
and just work.
Let me know...
Joe
>
Exception Trace
Dec 27, 2006 4:47:50 PM | com.gisil.themis.db | SEVERE | Unable to load merchant DEL = 911168900164. Reason - java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMERR start() failed on resource 'themis-ds': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException: Unexpected error during start for XAResource 'themis-ds': Transaction timed out after 29 seconds
BEA1-252DE51AC930078CA638
at weblogic.jdbc.wrapper.XA.createException(XA.java:103)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:753)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1182)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1115)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:274)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:497)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:429)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1408)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1413)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

Xperia U Firmware or Roms for Locked Bootloader

Similar Messages

Maybe you are looking for