Xperia U restarting frequently after root
guys
i need ur help asap
my phone is restarting constantly
it turns on and restarts after half a minute or so everytime
and goes on and on
i just now rooted my phone from here http://forum.xda-developers.com/showthread.php?t=1886460
and its video http://www.youtube.com/watch?v=7EpkrCq1gfM
my phone was then rooted.
then i installed u-disco and beats audio installer.
both need root.
beats audio installer warned me to backup using titanium backup if something went wrong.
i downloaded titanium backup but i didnt backup.
i then installed beats audio installer.
it seemed crappy so i unstalled it(not removed from phone).
and after that the phone kept restarting itself
it turned on and restarts after half a minute or so everytime
and went on and on.
when it turns on
i do get some 15 sec. or so before it restarts again
in that time, i removed beats audio installer.
but nothin hepled.
i even removed the sim and tried
but in vain.
i aint even able to find the reason for restarts
if its the beats audio or rooting
please tell me what to do
i am in a total mess
I recommend that you try to repair the software in the phone using PC Companion and see if that helps.
Moving thread to proper forum.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.
Similar Messages
-
Exchange Server 2013 restarts frequently after Cumulative Update 3 is installed
Hi All,
In our Environment Exchange Server 2013 CU3 is installed and restarts every alternate days.Below are the details
Event Id : 6008
The previous system shutdown at 03:13:44 on 12-06-2014 was unexpected.
Evend Id : 1001
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000ef (0xfffffa800e9a8080, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 061214-30108-01.
Event 41, Kernal Power
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Can somebody help me through this because it was causing severe to our organization and restarts frequently as well.Hello,
Try following solutions:
http://support.microsoft.com/kb/2883203/en-us
http://itsalwaysmyproblem.com/2013/08/27/exchange-2013-and-bugcheck-0x000000ef/
Also installing CU5 may be helpful.
Hope it helps,
Adam
www.codetwo.com
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
find the answer faster. -
X10 restarting frequently after 2.3 update
I am unable to use the phone after I updated to Android 2.3. The phone is frequently restarting randomly. I followed the information from http://talk.sonyericsson.com/thread/19735. I have tried to perform a software repair using PC Companion but it says no software update available. Updating with or without the sim card still have the same behaviour after updating to Android 2.3. I also formatted the SD card using the phone. I did not have this problem before the update. I performed a downgrade to Android 2.1 and the phone is stable again. My phone is now back on Android 2.1 as it was not stable on Android 2.3.
Anyone got any ideas what else I can try?. I really want to get 2.3 on my phone.How long have you had the phone for?
Not sure if your problem is the same with what I observed recently.
I think it could be a battery issue.
Are you able to source another newer battery for the phone?.
The reason I am asking you to see if you can get another battery is because of the following.
I was helping a friend recently to update his X10 to v2.3 and his phone was also behaving in a rather similar manner.
Just by chance I stumbled across the cause of the problem ie the battery. It was not because of bad contact points. I cleaned the contact points and check that the contacts were not loose.
Sounds strange but after I put in my battery which is much newer than his, we could not believe our eyes. The phone suddenly became stable.
The frequent restarts stopped.
I can't think of any reason why v2.3 is less tolerant of old batteries or may be his battery is slightly faulty.
Anyway, see if you can get another battery and try.
Put it in before attempting the update again and let me know the outcome. -
My Sony Xperia SP not work after root
hi all. how i can i do, on my xperia SP after i root it .My phone just on show logo Sony on black srceen .How can you help me ?
Now it ok, but I need to install my Khmer unicorn fonts. How I install it without root?
-
Hi please help ,
Certain updates were been installed and then a restart was done to install the updates successfully in my MAc Book PRO .After restarting the sytem, the system displayed a message for a restart and it happened three times.Every time i Login in back , the message displayed on the screen says " Your computer was restarted beacuse of a problem". I'm new to Mac and therefore could not understand the problem. It would be much appreciated if some one can answer or explain this activity to me .Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck. -
Aperture 3 keeps crashing on me, consistently. More frequently after using Burn tool or skin smoothing - and even more often when I feather. What can I do? I already upgraded my RAM. I'm at a loss!
4) When my computer crashes, once it starts again, it says "repairing" ... but I am not familiar with reparing permissions -- can you explain how I might do that?
If you are running OS X Lion, then you can restart your computer and then press and hold the 'Option' key immediately after you hear the start up 'gong' (usually heard when grey screen shows as it restarts).
You should see at least two Disks to choose from. Choose 'Recovery Disk' and wait for it to load, then choose 'Disk Utility' option in the Utilities dialog.
Once Disk Utility loads, do the following:
1 - In the left hand pane, choose your system partition (usually called either 'Macintosh HD' or 'Macintosh SSD'). Note - don't choose the actual hard drive listed above the partition when using Disk Utility in OS X Lion as this doesn't offer options for repairing due to it including the Recovery Disk you have loaded in memory.
2 - Click the 'First Aid' tab
3 - Click the 'Repair Disk Permissions' button in lower portion of main pane and allow to complete. Ideally, you will get a final message in main pane saying Disk Permissions are repaired.
4 - At lower right of same pane, click the 'Repair Disk' button and allow to complete. Ideally, you will get a final message indicating that Disk Repair is completed and all appears to be good.
5 - Quit Disk Utility > Close Utilities dialog window > Click 'Restart' button (confirm as needed).
You should boot straight into the system partition when complete.
Note - any red text in the main pane text while running the repairs will be issues and you will need to follow the advice given or post back.
If you are running Snow Leopard; then (as David mentions) boot from your first OS X reinstall disc and run the Disk Utility the same way; except you select the actual hard drive listed at top of left pane (not the partition below it). This is because Snow Leopard does not use a 'Recovery Disk' partition and repairs can be run on the HD or SSD itself.
Hope that helps. -
Hi Guys
Successfully installed Oracle Linux 6.4 operating system , which subsequently runs as expected.
When Oracle Linux 6.4 is shutdown using standard GUI system/shutdown ,
it does a clean shutdown and power-off as expected ....
UNTIL some 10 minutes or so later , when Oracle Linux 6.4 reboots all by itself from a fully powered-down state.
Likewise when Oracle Linux 6.4 is shutdown using standard command line " shutdown -h now" ,
it does a clean shutdown and power-off as expected ....
UNTIL some 10 minutes or so later , when Oracle Linux 6.4 reboots all by itself from a fully powered-down state.
Clearly it is NOT desirable to have the operating system able restart of it's own accord.
A manual shutdown is typically done for good reason , and the server should remain shutdown.
The previous version, ie Oracle Linux 6.3 did not exhibit this behavior.
When Oracle Linux 6.3 was shutdown, it stayed shutdown
Question
======
Does anyone know how to STOP Oracle Linux 6.4 from restarting itself after a successful shutdown ?
Thanks
BruceDoes anyone know how to STOP Oracle Linux 6.4 from restarting itself after a successful shutdown ?
Assuming your network interface is eth0, execute "$ ethtool eth0", like below, and indicate what you get for the lines "Supports Wake-on" and "Wake-on.
lx04:/root $ ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: pg
Wake-on: d
Current message level: 0x0000003f (63)
drv probe link timer ifdown ifup
Link detected: yes
Then check in your BIOS (usually under APM) for any enabled power-on settings associated with PCI or PCIe bus (your NIC will use one or the other). -
HT201394 iPad air restarts frequently
My iPad air restarts frequently with a blue screen flash. This issue started after installing IOS 8.0. Any fix for this?
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new
Settings>General>Reset>Erase all content and settings -
N86 Not playing any videos,N97 restarts frequently...
My friend's N86 is not playing any videos,even those recored by the phone . Think it's a bug. Also he's not able to update the firmware.
Now it plays the videos with the hard resetting.
Is there any other solution to this problem ?
Hope Nokia will come up with a new Firware update soon as we can't always do the same to play the videos.
A N97 after updating to latest version(updated yesterday) started restarting frequently.The phone started to hang too. What might be the problem ?it is the 802.11n AEBS
and it does seem to lose network connectivity only when the LinkStation is connected to the AEBS via ethernet (even when the LinkStation isn't turned on).
the only time i can seem to get the AEBS to work properly and consistently is if i go entirely with wireless connectivity and the LinkStation is connected directly to the Mini via ethernet. which isn't my ideal setup -
Help me! How do i reboot phone after root?
I Just rooted my phone today. I'm using an xperia mini st15i and i've used the ray-kernel for my phone since there was so seperate one for my phone. After long days i rooted my phone properly(it showed success on runme.bat) but since then i haven't been able to switch on my phone. When i press the power button, it vibrates shortly ater which the device turns on and doesn't show the screen. It's switched on but nothing shows. The only way to switch off my phone is to try and take the battery out. Please need help!!!!
AAAAAAAAAA HELP ME?Hey Francis,
Thanks for your time.. and my warranty was only for a year and its been a year and a half so better to root than to leave it as it is..
Anyways, i've fixed the problem. I reupdated my phone using Sony Update Service and I tried rooting again. I had to flash my custom kernel after rooting and in recovery mode. It's all fixed now thanks! -
Extreme hang problem in Xperia T2 Ultra Dual after Lollipop Update.
Extreme hang problem in Xperia T2 Ultra Dual after Lollipop Update.Extreme and Irritating hang problem occurs after I have updated T2 Ultra Dual Phone with Lollipop Version.Kindly assist and also if Boot the device will it be solved via flashboot and unlock the bootloader?? Waiting for revert.Kindly revert.
Flashmode or Fastboot mode is only for those that wish to root and install a custom Rom or firmware, if that's what you want to do then head over to XDA - Howwever have you tried a system repair as this usualy fixes issues after an upgrade.
Performing a system repair using PC Companion will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP -
Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working? -
SSRS 2008 R2 Services not restarting automatically after reboot
SSRS 2008 R2 Reporting instance not restarting automatically after patches install. Is there a way to resolve the issue
Windows 2008 R2 Server
16 GB RAMHi,
Follow this article to resolve the issue:
Reporting Services service doesn't start after the installation of MS12-070 security patch
http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx
Workaround 1:
Modify the registry to increase the default time-out value for the service control manager. To increase this value to 60 seconds, follow these steps:
1. Click Start, click Run, type regedit,and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.
3. In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must créate it. To do this, follow these steps:
a.On the Edit menu, point to New, and then click DWORD Value.
b.Type ServicesPipeTimeout, and then press ENTER.
c.Right-click ServicesPipeTimeout, and then click Modify.
d.Click Decimal, type 60000, and then click OK.
This value represents the time in milliseconds before
Restart the computer for the changes to take effect. Check that SSRS services can be started now.
You cannot start SQL Server Reporting Services after you apply the update that is discussed in KB 2677070
http://support.microsoft.com/kb/2745448/en-us
Thanks.
Tracy Cai
TechNet Community Support -
I purchased a mac book pro in oct 2011, I restarted it after updating and it,s stuck on apple symbol, I hit command R while restarting and clicked on disk utility. It says disk can't be repaired, apple wants $249 to tell me what's wrong. Please help!
What Apple store told you they wanted $249.00 to tell what is wrong?
If this is a 13" Macbook Pro then that is the cost of the Extended Applecare warranty. As you are outside the 90 days of Free Phone Support then what Apple told you is that to get Phone Support you would either need to pay $45 per phone call or pay $249.00 for the Applecare extended warranty which comes with 3 years Free Phone Support from date of purchase.
Or you can take it to a Apple Genius Bar and have them look at it for Free.
Every Mac comes with 1 year warranty and includes only 90 days of phone support. You can buy the extended Applecare warranty anytime within the first year of ownership, IE until the 1 year warranty runs out.
I suggest you have your computer looked at by either an Apple Authorized Repair Center or Genius Bar and then before the 1 year warranty runs out buying the extended warranty -
My imac 10.6.8 hangs on the spinning wheel after installing Samsung Kies (KiesMac_2-0-0-13023_10_1).
I was able to restart ok after installation; I even moved some files from my
Galaxy 3 to the imac.
But on the next (and all subsequent) restart attempts, it hangs on the spinning wheel.
How to fix? Thanx in advance.Mac OS X: Gray screen appears during startup
Maybe you are looking for
-
How do I use the old Numbers with Mavericks
The new version of Numbers causes me to lose data from my spreadsheets. I want to continue using iWork '09, but Mavericks won't let me! I trashed the new versions of Pages, Numbers and Keynote, did some repair work, and it seemed to be okay. But t
-
E-Mail won't STOP Notifying / Programs won't Update
I've attempted to turn off e-mail notifications and it doesn't care, it'll notify me anyways. I will turn off notifications and set the e-mail sync frequency to never, and somehow it STILL manages to annoy the **bleep** out of me by telling me I have
-
HT201317 How can i get all the photos that are in my photo stream on my mac onto my new iPhone?
How do I get the photos that are in my photo stream on my mac in iphoto onto my iphone 5?
-
Work flow book Information please
Please tell me the good book to learn SAP work flow basics thank u in advance
-
I've edited the RAW images I've imported and backed them up on Disk, now I'd like to remove the RAW files leaving the edited JPGs. Is there any way to do this with out deleting all the images (RAW and jpg edits) then reimporting the jpg images? I alr