Xperia Z not working after dropping in water

weird could been that your back plate was lose so water leaked in :/ also red indicator voids your warranty thats why they are charging you for the repair or for new phone :/ but you could try rice method tutorial that Ullwolly or w.e his name posted some where to dry the phone fully

hay!! i beg you please help me!! sorry for my bad english sir.. yesterday my phone fell to water, but all the flaps are closed. and then when i checked it after,, water havent got inside from them because it all indicates white!! but after droping to water my phones power button did not work and volume button worked as power button,, and then somehow turned off my xperia z and then when i try to turn it back on it beep once and after two seconds it beaps 3 times and then it turned of.. when i connect my phone to charging adapter it beeps once again and after two sec it beaps 3 times and it happening on and on ,, pls help me!!! the phone is only 12 days after i purchesed it!!!

Similar Messages

TRUNCATE TABLE NOT WORKING AFTER DROPPING CONSTRAINTS

Hi,
I have a table with a foreign key constraint. I know you can't truncate tables when there are foreign key constraints. So I drop the constraints before running the TRUNCATE TABLE command. But SQL Server is still stating there are foreign key constraints
even after they have just been dropped.
When I use SQL Server Management Studio to generate a drop & create script on this table or any other table with an FK consttaint, the generated script fails stating that there are still foreign key constraints??
I have the same problem for every table that has FK constraints, for those without FK, TRUNCATE table works without issues.
The end goal is to reset the identity value of the primary key. Since DBCC does not work on Azure, TRUNCATE TABLE is the only way left, especially if you can't even drop and recreate tables with FK constraints.
What am I missing here?
Peter

Hi,
Thanks for posting here.
TRUNCATE TABLE is similar to the DELETE statement with no WHERE clause; however, TRUNCATE TABLE is faster and uses fewer system and transaction log resources.
TRUNCATE TABLE removes all rows from a table, but the table structure and its columns, constraints, indexes, and so on remain. To remove the table definition in addition to its data, use the DROP TABLE statement.
If the table contains an identity column, the counter for that column is reset to the seed value defined for the column. If no seed was defined, the default value 1 is used. To retain the identity counter, use DELETE instead.
Restrictions
You cannot use TRUNCATE TABLE on tables that:
•Are referenced by a FOREIGN KEY constraint. (You can truncate a table that has a foreign key that references itself.)
•Participate in an indexed view.
•Are published by using transactional replication or merge replication.
For tables with one or more of these characteristics, use the DELETE statement instead.
TRUNCATE TABLE cannot activate a trigger because the operation does not log individual row deletions. For more information, see CREATE TRIGGER (Transact-SQL).
Truncating Large Tables
Microsoft SQL Server has the ability to drop or truncate tables that have more than 128 extents without holding simultaneous locks on all the extents required for the drop.
Permissions--------------------------------------------------------------------------------
The minimum permission required is ALTER on table_name. TRUNCATE TABLE permissions default to the table owner, members of the sysadmin fixed server role, and the db_owner and db_ddladmin fixed database roles, and are not transferable. However, you
can incorporate the TRUNCATE TABLE statement within a module, such as a stored procedure, and grant appropriate permissions to the module using the EXECUTE AS clause.
You cannot truncate a table which has an FK constraint on it.
Typically my process for this is:
Drop the constraints
Trunc the table
Recreate the constraints.
Hope this helps you.
Girish Prajwal

IPhone 5 Bottom Volume Button Not Working after Drop

After dropping my iPhone 5, I realized that the bottom volume button no longer works. I can get it to work, but only with a large amount of force. Before I take it into the Apple Store, I was wondering if there is any possible way I could fix this myself. The iPhone is running iOS 6.1 (jailbroken, I'll restore it before I take it in).

No. Opening the phone will gaurantee that Apple will not replace it. Either in or out of warranty. You'd better hope that your "restore" manages to get it to the point that the genius doesn't notice it was jailbroken too, otherwise they will turn you away.

Ipod Touch Not working after dropping

I dropped my Ipod Touch and not able not turn it on after that. The screen shows frozen state (time of the dropping) with no brightness. Any input on this appreicated. Thx

Hello and Welcome to Apple Discussions.
I'm sorry to hear of your woes... Have you tried the standard troubleshooting techniques?
http://docs.info.apple.com/article.html?artnum=306418
If the screen is still showing a display and is intact then you may be in luck.
Otherwise you're probably looking at a household insurance claim (if covered).
If you do get lucky this time go and get yourself at case too.
Let us know how you get on.
mrtotes

Phone not working after dropped

dropped the phone today and it started freezing after that. i tried to charge it in my SONY docking station; and i had a friz noise and the SONY STATION BLEW UP AS WELL; double whammy and my phone never turned back on either... occasionally the apple logo will come and then turn off.
Need help...

Your only solution is to get your phone repaired or replaced - and likely the Sony dock as well.
Unless you are a skilled tech with the proper tools and testing equipment (costing many times more than a new iPhone), there is no way for you to diagnose and fix it yourself.

My Sony Xperia SP not work after root

hi all. how i can i do, on my xperia SP after i root it .My phone just on show logo Sony on black srceen .How can you help me ?

Now it ok, but I need to install my Khmer unicorn fonts. How I install it without root?

My xperia z3 not working after today update!!!

I tried to update it with my pc and it's turned of and didn't work again!!

Connect your phone to a wall charger, press and hold power and volume up for 10 seconds, let it charge for two to three hours, then repair it with PCC

I dropped my iphone5 in water... my sim is not working now... wat shud i do now???

i dropped my iphone5 in water... my sim is not working now... wat shud i do now??? i dont hav insurance too

If your SIM isn't working then go to your network provider and get a new one.
However, the water is likely to have damaged more than just the SIM. If the iPhone is damaged you'll have to pay to get it repaired or replaced if you don't have insurance.

Anyone else's iPhone 4s speaker not working after update to iOS 6.1?

My speaker does not work after updating the software to iOS 6.1. No sound for incoming calls or texts, no speakerphone, no siri, no music or any sounds played from apps. Headphones still work as does anything plugged into the headphone jack. I've check all my settings - everything is correct. I've rebooted and restored settings several times, I've docked it - nothing works.
Anyone else having this problem? Did anyone have this problem and were able to fix it? Does anyone know if Apple is aware and will be sending another update to fix it? I really don't think it's a hardware problem. Phone is in immaculate condition and never dropped or spilled on.

As stated...
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere

Lenovo A1 - Touch screen not working after digitizer replacement

After dropping my tablet and breaking the digitzer, I ordered a replacement digitzer from a company in China. (It took about a month to get it) After watching this video, I was able to install my new digitizer and it finally looked new again....well at least the screen!
But.....when I powered up my tablet, the touch screen wasn't working..... I emailed back and forth with the company and they told me to install drive program, and send me a link to a site with a video, this site may have contained more than the video, but it was all in Chinese and I couldn't figure it out even with Google Translate. So I started researching. I thought I would try and load ICS on it, I thought, "Whats the worst thing that could happen?" it wasn't much more than a brick at this point anyways.
I found this website that let me through installing ICS on it. I had absolutly no expectations...but IT WORKED!!!! MY TOUCH SCREEN IS NOW WORKING!!!! I COULDN'T BELIEVE IT!!!
When I was researching for this problem, there was absolutly no posts anywhere for "Touch screen not working after new digitizer". So I wanted to share my experience.

Yea you are correct.....it must be a hardware problem. You must contact service centre of Lenovo and get help from there.
You can say thank you by pressing the star left to my post IF I HELPED YOU

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

My keyboard does not work after cleaning :-(

Hello, I have a MacBook Pro (bought in december 2009) an now the keyboard does not work after I cleaned it. This was on thursday and today it still does not work. Any ideas?

Chances are that you've shorted the terminals on the keyboard, and will need to be replaced… When the keyboard on unibody MacBook Pro's is replaced the whole 'top case' will be done, trackpad etc… Now generally it is highly unlikely that the Liquid submersion indicators will have been activated unless the cloth was saturated with water. Also unless you purchased the AppleCare protection plan your MacBook will be out of warranty and will require an out of warranty repair.
From knowledge out of warranty repair for a top case assembly it's £163 and a level 2 hardware repair is £28

HT4623 my phone main button not working after installed new version software 7.0.6

my phone main button not working after installed new version software 7.0.6

Arrange some liquid like petrol spirit and w 40
two drops in to home button.
30 times press slowly slowly and then restart your apply iphone.
You will get ready.
I am sure. Thanking you...

Xperia Z not working after dropping in water

Similar Messages

Maybe you are looking for