Xperia Z suddenly cannot find service provider
Had my Xperia Z since May, had a few problems with it but seemed to fixed it self after a while, and has been working perfectly for the past 4 months. Today when I woke up, it suddenly would not connect to my usual service provider, changed my sim card to a samsung, and it was working perfectly. Refusing to give up I put back my sim card and tried to go around the area where I usually get strong signal from my service provider, and I found out that I could still get on my service provider's network but with horrible signal.(ie. places where I usually get a full bar from my service provider, I now either get 1 bar, no bars or no signal at all!, everywhere else I dont get any signal at all) I have contacted my service provider (in my case GLOBE telecom, philippines) and they said there was no problem on their end. HELP! Edit: Have tried sim card of other service providers and same result... no signal Model number :c6603Android Version :4.2.2Build number: 10.3.1.A.2.67
In that case I suggest that you try to reinstall the phone software using SUS.
http://www.sonymobile.com/gb/tools/update-service/
If you still can't get a similar signal compared with the other phone you should contact your local support team, to have the phone examined and fixed at an repair center.
http://www.sonymobile.com/global-en/support/contact-us/contact-info/
Similar Messages
-
Cannot find service {0}. Parameter name: SQLWriter SQL Express 2008 R2 SP2
Hi, installing SQL Express 2008 R2 SP2 onto Windows Server 2012 R2. I had previously removed SQL Express 2012 due to failed install due to incompatibility with our SAN. (I had uninstalled it via Programs & Features,
and also by following Shanky's tips. http://social.technet.microsoft.com/wiki/contents/articles/24364.sql-server-troubleshooting-could-not-find-database-engine-startup-handle-error-during-installation.aspx).
This is what's in Detail log:
014-10-07 13:12:00 Slp: Parameter 5 : SqlEngineConfigAction_install_confignonrc
2014-10-07 13:12:00 Slp: Parameter 6 : 0x50806C41
014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL
Server.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2014-10-07 13:12:02 Slp: Cannot find service {0}.
The SqlEngineConfigAction_install_confignonrc part is what is in the background before the
Cannot find service {0}. Parameter name: SQLWriter pops up.
And in Event Viewer:
Log Name: Application
Source: Microsoft-Windows-RestartManager
Date: 10/7/2014 1:11:48 PM
Event ID: 10010
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer:
Description:
Application 'C:\31f53f2e988a36f2c31e\x64\setup100.exe' (pid 688) cannot be restarted - Application SID does not match Conductor SID..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-RestartManager" Guid="{0888E5EF-9B98-4695-979D-E92CE4247224}" />
<EventID>10010</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-10-07T20:11:48.532980400Z" />
<EventRecordID>4538</EventRecordID>
<Correlation />
<Execution ProcessID="732" ThreadID="2548" />
<Channel>Application</Channel>
<Computer></Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<RmUnsupportedRestartEvent xmlns="http://www.microsoft.com/2005/08/Windows/Reliability/RestartManager/">
<RmSessionId>0</RmSessionId>
<Pid>688</Pid>
<FullPath>C:\31f53f2e988a36f2c31e\x64\setup100.exe</FullPath>
<DisplayName>Managed SQL Server Installer</DisplayName>
<AppVersion>0</AppVersion>
<AppType>5</AppType>
<TSSessionId>2</TSSessionId>
<Status>67108865</Status>
<Reason>1</Reason>
</RmUnsupportedRestartEvent>
</UserData>
</Event>
Found one article saying you can get this if previous version not fully removed, and to do a repair of the previous version, but as I said I uninstalled it and followed all steps for cleanup, so nothing to repair.Here is the ERRORLOG file from C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log. At the bottom I am seeing the error you said before was a SAN issue. I had hoped that issue was only with
SQL 2012, but it appears it is even with 2008?
If that is still the issue, I'm trying to understand if by the articles, if the SAN conflict is an OS issue or an SQL issue? In other words, is it because the OS is Server 2012? Or would this still occur if I install SQL
2008 on Server 2008 R2? I don't know that they will be willing to upgrade the SAN, and I don't really want to fool with a .VHD (virtual disk) as a workaround speaks of.
If you're asking if I did this from your article: select startup account for Database Engine services as NT Authority\SYSTEM
, I don't recall what I did this last time. I was doing that the last few days, but I think I didn't switch it to that once, just to see if I would have success. I don't know if that was this last time or not when I switched it.
Is there anywhere I can check that after the fact?
014-10-08 12:53:09.84 Server Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64)
Jun 28 2012 08:36:30
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
2014-10-08 12:53:09.84 Server (c) Microsoft Corporation.
2014-10-08 12:53:09.84 Server All rights reserved.
2014-10-08 12:53:09.84 Server Server process ID is 2640.
2014-10-08 12:53:09.84 Server System Manufacturer: 'IBM', System Model: 'IBM System x -[7870AC1]-'.
2014-10-08 12:53:09.84 Server Authentication mode is WINDOWS-ONLY.
2014-10-08 12:53:09.84 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-10-08 12:53:09.84 Server This instance of SQL Server last reported using a process ID of 2848 at 10/8/2014 10:56:44 AM (local) 10/8/2014 5:56:44 PM (UTC). This is an informational message only; no user action is required.
2014-10-08 12:53:09.84 Server Registry startup parameters:
-d c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-10-08 12:53:09.84 Server Command Line Startup Parameters:
-m SqlSetup
-f
-Q
-q SQL_Latin1_General_CP1_CI_AS
-T 4022
-T 4010
-T 3659
-T 3610
-T 902
-d c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf
-l c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf
2014-10-08 12:53:09.86 Server Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically.
After the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
2014-10-08 12:53:09.86 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-10-08 12:53:09.86 Server Detected 16 CPUs. This is an informational message; no user action is required.
2014-10-08 12:53:10.00 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-10-08 12:53:10.01 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-10-08 12:53:10.01 Server Lock partitioning is enabled. This is an informational message only. No user action is required.
2014-10-08 12:53:10.03 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-10-08 12:53:10.05 Server Support for distributed transactions was not enabled for this instance of the Database Engine because it was started using the minimal configuration option. This is an informational message only. No
user action is required.
2014-10-08 12:53:10.06 spid7s Warning ******************
2014-10-08 12:53:10.06 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-10-08 12:53:10.06 spid7s Starting up database 'master'.
2014-10-08 12:53:10.08 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.08 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf' because it was originally formatted with sector size 4096 and is now on a volume with sector
size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf' because it was originally formatted with sector size 4096 and is now on a volume with sector
size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf' because it was originally formatted with sector size 4096 and is now on a volume with
sector size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf' because it was originally formatted with sector size 4096 and is now on a volume with
sector size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size. -
Java.security.NoSuchAlgorithmException: Cannot find any provider supporting
Why I got following error:
java.security.NoSuchAlgorithmException: Cannot find any provider supporting DESede/ECB/PKCS5Padding
at javax.crypto.Cipher.getInstance(DashoA6275)
at helpdesk.connection.ChangeSecurity.initDecrypt(ChangeSecurity.java:125)
at helpdesk.connection.DbConnection.createPools(DbConnection.java:171)
at helpdesk.connection.DbConnection.init(DbConnection.java:209)
at helpdesk.connection.DbConnection.(DbConnection.java:49)
at helpdesk.connection.DbConnection.getInstance(DbConnection.java:39)
at helpdesk.db.db_user.getUser(db_user.java:596)
at _0002fLoginCheck_0002ejspLoginCheck_jsp_5._jspService(_0002fLoginCheck_0002ejspLoginCheck_jsp_5.java:208)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.runtime.JspServlet$JspServletWrapper.service(JspServlet.java:174)
at org.apache.jasper.runtime.JspServlet.serviceJspFile(JspServlet.java:261)
at org.apache.jasper.runtime.JspServlet.service(JspServlet.java:369)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:503)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:559)
at org.apache.tomcat.service.connector.Ajp12ConnectionHandler.processConnection(Ajp12ConnectionHandler.java:156)
at org.apache.tomcat.service.TcpWorkerThread.run(PoolTcpEndpoint.java:366)
at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:411)
at java.lang.Thread.run(Thread.java:534)
java.lang.SecurityException: The provider SunJCE may not be signed by a trusted party
at javax.crypto.SunJCE_b.a(DashoA6275)
at javax.crypto.Cipher.a(DashoA6275)
at javax.crypto.Cipher.getInstance(DashoA6275)
at helpdesk.connection.ChangeSecurity.initDecrypt(ChangeSecurity.java:127)
at helpdesk.connection.DbConnection.createPools(DbConnection.java:171)
at helpdesk.connection.DbConnection.init(DbConnection.java:209)
at helpdesk.connection.DbConnection.(DbConnection.java:49)
at helpdesk.connection.DbConnection.getInstance(DbConnection.java:39)
at helpdesk.db.db_user.getUser(db_user.java:596)
at _0002fLoginCheck_0002ejspLoginCheck_jsp_5._jspService(_0002fLoginCheck_0002ejspLoginCheck_jsp_5.java:208)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.jasper.runtime.JspServlet$JspServletWrapper.service(JspServlet.java:174)
at org.apache.jasper.runtime.JspServlet.serviceJspFile(JspServlet.java:261)
at org.apache.jasper.runtime.JspServlet.service(JspServlet.java:369)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:503)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:559)
& nbsp; at org.apache.tomcat.service.connector.Ajp12ConnectionHandler.processConnection(Ajp12ConnectionHandler.java:156)
at org.apache.tomcat.service.TcpWorkerThread.run(PoolTcpEndpoint.java:366)
at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:411)
at java.lang.Thread.run(Thread.java:534)this is my code
public String initEncrypt ( String s) throws Exception
String plaintext = s;
String rs = "";
Provider sunJCE = null;
//Class providerClass = Class.forName ("com.sun.crypto.provider.SunJCE");
// Security.addProvider ( (Provider)providerClass.newInstance() );
//Security.addProvider(
// new com.sun.crypto.provider.SunJCE());
Provider[] providers = Security.getProviders();
for (int i = 0; i < providers.length; i++)
System.out.println("===>"+providers);
try
ObjectInputStream in = new ObjectInputStream(new FileInputStream(FILE_PATH));
key = (Key) in.readObject();
in.close();
catch(FileNotFoundException fn)
//try
KeyGenerator keyGenerator = KeyGenerator.getInstance ( "DESede");
keyGenerator.init(168);
key = keyGenerator.generateKey();
ObjectOutputStream out = new ObjectOutputStream( new FileOutputStream (FILE_PATH));
out.writeObject(key);
out.close();
//} catch ( Exception ex )
// ex.printStackTrace();
try
//chipher ������ ������
cipher = javax.crypto.Cipher.getInstance("DESede/ECB/PKCS5Padding");
cipher.init ( Cipher.ENCRYPT_MODE, key );
String encrypted = encryptStringBase64 ( plaintext );
rs = encrypted;
}catch ( NoSuchAlgorithmException aaa )
aaa.printStackTrace();
}catch ( Exception ex )
ex.printStackTrace();
return rs;Crossposted, with answers:
http://stackoverflow.com/questions/10193567/java-security-nosuchalgorithmexception-cannot-find-any-provider-supporting-aes -
"Cannot find any provider supporting RSA/ECB/PKCS1Padding" in jdk5
i use SSLSocket, HttpsURLConnection in program , run well in jdk1.4 but
get wrong in jdk1.5.0_06, saying "Cannot find any provider supporting RSA/ECB/PKCS1Padding".
i also try to use the "Unlimited Strength Jurisdiction Policy Files 5.0", but still not work.
anyone knows why?
thanks.I need more info to tell you exactly. But here are some thngs that might not be working.
1st let me say I am assuming you are trying RSA encryption?
1) You have an external JCE provider which provides RSA support installed on your machine using the security properties file. An applet would use a different properties file if you are using either RAW applet or the plugin. You need to add the provider explictly. Aka Security.addProvider(new org.cryptix.jce.Criptix());
2) The external provider's jar file is not being downloaded with your applet code. Note that the Sun Java plugin does not use the same jre/lib/ext directory as does the JDK.
3) Some sort of security violation in the SecurityManager of the applet engine if you are not using the Sun Java Plugin.
Those are just guesses. but it might help if you were to inform us as to what RSA function youa re trying to do. AKA Signature or Cipher.
Signatures would be a bit more complicated as at least JDK 141 and above have the SunRsaSigner built in. Again if you are using RAW applets (netscape/IE engine) then that would be the problem. (aka no provider installed). -
Weblogic Server cannot find Service accounts in my MSAD via LDAP
Hello,
I've configured an LDAP security provider in my WebLogic server but it's only finding some of my users, not my "service account" users.
The users are found in the following locations in the tree:
OU=Users,OU=Accounts,DC=dev,DC=mtb,DC=com
OU=Service,OU=Accounts,DC=dev,DC=mtb,DC=com
So I configured the LDAP provider with the following settings:
User Base DN: OU=Accounts,DC=dev,DC=mtb,DC=com
All Users Filter: (blank)
User from Name Filter: (&(cn=%u)(objectclass=user))
User Search Scope: subtree
User Name Attribute: cn
User Object Class: user
But it cannot find users in the "Service" node, only users in the "Users" node. Both users have CN=, and "user" as part of their objectClass string. Any idea what I might be missing?
Thank you,
-BenHi
1. I hope you already created a datasource on Weblogic Side using weblogic admin console and create New Data Source. Create a data source preferably with this JNDI Name "jdbc/mydbDSDS". It can be anything, but standard is jdbc/whatevernameyouwant. Once data source is created, you give db details like host, port, sid, username/password. Then deploy to appropriate server(s) like using Targets screen. Once all done. Under your domain/config/jdbc, you should see a .xml file with some unique name that has all the datasource details. The jndi name tag should be like this: <jndi-name>jdbc/mydbDSDS</jndi-name>
2. Now, edit your persistence.xml file to refer above jndi name. By default, I know, it adds that wierd name with jdbc/jdbc etc etc. But you can edit it always. Take a backup of your persistence.xml file and edit it to look like this.
<persistence-unit name="mydbDS">
<provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>
<jta-data-source>jdbc/mydbDSDS</jta-data-source>
<properties>
<property name="eclipselink.target-server" value="WebLogic_10"/>
<property name="eclipselink.cache.shared.default" value="false"/>
</properties>
</persistence-unit>
</persistence>Save it. Redeploy and see how that goes. The above file is simplified version. What it means is, just refer already deployed data source whose jndi name is "jdbc/mydbDSDS". If you really have some extra properties, you can retain them. Otherwise they are not required.
Thanks
Ravi Jegga -
Xperia z3 compact - cannot find 4K video files in file manager or on sd card
Hi all,
This is my first post so hello to everyone.
This is also my first smartphone and up until now I have not had any problems.
I took a 12 minute 4K video the other day which is showing in my album but when I come to transfer it to my PC using the Sony Companion software I cannot find it anywhere.
I looked for it on the internal memeory and it only displays photos - no video.
I then bought a 128 GB SD card and transferred everything onto that, went back on the pc software but again the video is not displayed in the DCIM files.
I have done a search using windows on both internal memory and SD card and nothing comes up for the file name.
I can view the video on the phone and the details say it is on the SD card and give a full filename and pathway but as I said nothing comes up on a search.
Why would this be?
The file is 4.5GB in size but I didn't think that would be relevant.
Can anyone help?
Thanks
Gilesare you on a PC or Mac?
open the video (play it) >while the video play tap on the icon to minimize the video > it will show you the path
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Server Admin suddenly cannot find the host it runs on
I am running mac osx server, snow leopard. It ran fine until just recently. Suddenly Server App is unable to find the host it runs on.
I enter the hosts IP address on the local network, log in with my administrator username and password, and the system comes back telling me
Could not connect to <ip address>
Server Admin was unable to connect to the server at <~ip address>
Server Preferences tells me that this host cannot be found on the network too.
Point is however that both these apps run on the host with that very IP address. It is set up in System Preferences > Network, and is hardcoded, not given by the DHCP server in the router. I can also connect to the web server running on this host using the laptop and an ipad.
This is quite annoying, especially as Server Admin is the only app that lets you manage the host it runs.
Mac mini, OS X Server, version os os x server is 10.6.8relais:~ locadmin$ sudo changeip -checkhostname
Password:
Primary address = 192.168.39.200
Current HostName = relais.local
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success = "success"
and
relais:~ locadmin$ sudo lsof -i -P | grep ':311'
relais:~ locadmin$
The log is telling about a crash in servermgrd, which is restarted and crashing every ten seconds, a bit from the crash report
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 com.apple.CoreFoundation 0x00007fff89aa244f __CFTypeCollectionRetain + 191
1 com.apple.CoreFoundation 0x00007fff89aabca5 __CFBasicHashAddValue + 53
2 com.apple.CoreFoundation 0x00007fff89ab3688 CFBasicHashSetValue + 184
3 com.apple.CoreFoundation 0x00007fff89ab34a7 CFDictionarySetValue + 199
4 com.apple.servermgr_dns 0x00000001031bbd66 addDataToDictionary + 2549
5 com.apple.servermgr_dns 0x00000001031bc6ec yyparse + 2324
6 com.apple.servermgr_dns 0x00000001031bd7a6 parseFile + 384
7 com.apple.servermgr_dns 0x00000001031dac19 optionsParser_lex_destroy + 104800
8 com.apple.servermgr_dns 0x00000001031d6406 optionsParser_lex_destroy + 86349
9 com.apple.servermgr_dns 0x00000001031d6468 optionsParser_lex_destroy + 86447
10 com.apple.servermgr_dns 0x00000001031ce904 optionsParser_lex_destroy + 54859
11 com.apple.servermgr_dns 0x00000001031cea41 optionsParser_lex_destroy + 55176
12 com.apple.servermgr_dns 0x00000001031d19c8 optionsParser_lex_destroy + 67343
13 com.apple.servermgr_dns 0x00000001031c1f78 optionsParser_lex_destroy + 3263
14 com.apple.servermgr_dns 0x00000001031c67db optionsParser_lex_destroy + 21794
15 com.apple.servermgr_dns 0x00000001031c254b optionsParser_lex_destroy + 4754
16 libservermgrcommon.dylib 0x000000010003ec18 -[BundleManager init] + 402
17 libservermgrcommon.dylib 0x000000010003dd9d +[BundleManager defaultManager] + 51
18 com.apple.ServerManagerDaemon 0x0000000100003bcb 0x100000000 + 15307
19 com.apple.ServerManagerDaemon 0x00000001000014c0 0x100000000 + 5312
So it looks like there is some t=file that is now not exactly like the parser wants it. -
ITunes suddenly cannot find any of my music (but I see it!!)
So all of my music (the entire library, including the library and xml files) are sitting on an external USB 2.0 drive, in this location:
e:/ITUNES/library
the xml and itl file is sitting at e:/ITUNES/
In advanced itunes preferences, my itunes library is set to stay organized, copy new music when opened in itunes, and the music folder is set to e:/ITUNES/library
All of the sudden, itunes can't find any of my music. I've tried to restart, no luck. I took a look in the XML file, and it is pointing at the G:/ drive instead of E for some reason (I don't even have a G drive!). I did a replace all with programmer's notepad (G:/ to E:/), but no luck. And when I re-open the xml file the next time, it's all back to G again....
any ideas??
ThanksYour music will only be where you put it.
It has always been very basic to always maintain a backup copy. Have you failed to do this?
If for some reason you have failed to back up, then you can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Iphone3Gs cannot find Service in Europe but original and other iphones can?
I don't know if I is just my iphone 3Gs but, I seem to unable to get service. I tried turning on and off my phone. My sister has the original iphone and my mother does not have an iphone but a cheap one. Their phones work in Europe. I tried comparing what is different about mine and my sister's. We are on the same plan. The only difference was hers was older and she been out of the country more and mine is recently new and it is the first time out of the country. We are both in Europe in the same place. Its very frustrating that their work and mine does not. Anyone can help me out?
I had the same problem in Europe and Africa last July with the orig Iphone. I calle ATT before I left to get the International rate and had to call them again from Europe to re do it ...When They did I got service. It sometimes takes awhile. I think you need to let ATT know you are going to europe and want service there. Also ATT may not give you overseas service if you have not been with them for a year or more.
-
Both of our iPhones won't find the our wireless router. The router is fine with other devices including our Mac and Kindle. Tried reseting and got nowhere. Any advice?
Oh I see, thanks for the info guys.
I find it incredibly weird that after just one night it went from connecting to not connecting at all. Now when I manually input my connection, It shows it and shows bars but when I select it, it doesn't connect and just has a little spinning wheel next to the network name.
EDIT: It came back somehow when I tried browsing in safari and it asked for my password and wala! Weird but hope it doesnt happen again haha. -
Outlook 2010 suddenly cannot find or is timing out with email servers and pop3 accounts.
ISP says DNS is fine . No proxys enabled. Have reset routers already
Hi,
Please try to increase the server time-out setting to check if the issue will be resolved. To do this, please follow:
1. Start Outlook.
2. On the Files menu, click Info >
Account Settings > Account Settings
3. Click to select the target POP3 account, and then click Change.
4. Click More Settings.
5. Click the Advanced tab.
6. Gradually increase the server time-out setting until the issue is resolved.
If the problem persists, please try to create a new mail profile in Control Panel to check if it helps. Please refer to the KB article below which described a similar situation:
http://support.microsoft.com/kb/315049/en-us
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support -
hi
i have a problem after installing flashBuilder 4 beta2 .
when i want to create Data/Service with BlazeDs and when i click on button finish
this error shown and I can't do anything with it .
in flashBuilder beta1 it's work perfect .
if any one in thereand know why?
please help me
ERROR: XML parse error : Error on line 1 of documen : cvc-elt.1:Cannot find declaration of element 'model'. Nested exeption:Cannot find declaration of element 'model'.
thanksHi,
Thanks for your feedback
Can you attach your sample project and provide details on the Flash Builder and BlazeDS builds you are using?
Also add your vote to http://bugs.adobe.com/jira/browse/FB-23479 a similar known issue
Thanks,
Balaji
http://balajisridhar.wordpress.com -
Identity service cannot find user
Installed BPEL 10.1.2
added user using jazn.jar
Now trying to log into worklist sample application
and I get identity service cannot find user. Do I need to assign any role(s) to new user.
Let me know.
I am seeing simple questions not getting answers. Is this an Active Forum?
Thanks
Raghuclosed
for OAS 10.1.2.0.2. & BPEL PM 10.1.2.0.2
I Install BPEL in MiddleTire
1. ./runInstaller
2. home = OAS home
3. tea
4. emctl stop em
emctl start em
5. Oracle_Home\opmn\bin\opmnctl stopproc ias-component=OraBPEL
Oracle_Home\opmn\bin\opmnctl startproc ias-component=OraBPEL
6. if OID working throw SSL, then 7,8 else 9
7. edit file Oracle_Home\j2ee\OC4J_BPEL\config\jazn.xml
<jazn provider="LDAP" location="ldap://host:636" default-realm="us">
<property name="ldap.user" value="cn=orcladmin"/>
<property name="ldap.password" value="!welcome1"/>
<property name="ldap.protocol" value="ssl"/>
</jazn>
8. edit file Oracle_Home\integration\orabpel\system\services\config\is_config.xml
<BPMIdentityServiceConfig
xmlns="http://www.oracle.com/pcbpel/identityservice/isconfig">
<provider providerType="JAZN" name="oid" >
<connection url="ldap://host:636" binddn="cn=orcladmin"
password="welcome1" encrypted="false">
<property name="securityProtocol" value="ssl" />
</connection>
</provider>
</BPMIdentityServiceConfig>
then 11
9. edit file Oracle_Home\j2ee\OC4J_BPEL\config\jazn.xml
<jazn provider="LDAP" location="ldap://host:389" default-realm="us">
<property name="ldap.user" value="cn=orcladmin"/>
<property name="ldap.password" value="!welcome1"/>
</jazn>
10. edit file Oracle_Home\integration\orabpel\system\services\config\is_config.xml
<provider providerType="JAZN" name="oid" >
<connection url="ldap://host:389" binddn="cn=orcladmin"
password="welcome1" encrypted="false"/>
</connection>
</provider>
11. edit file Oracle_Home\j2ee\OC4J_BPEL\application-deployments\hw_services\orion-application.xml
<jazn provider="LDAP" location="ldap://host:389" default-realm="us" >
<jazn-web-app auth-method="SSO"/>
</jazn>
12. Oracle_Home\opmn\bin\opmnctl stopproc ias-component=OraBPEL
Oracle_Home\opmn\bin\opmnctl startproc ias-component=OraBPEL
II Deploy BPEL portlets
1. throw EM add EAR to OC4J_BPEL:
fie: $ORACLE_HOME/integration/orabpel/system/services/lib/bpelportlet.ear
а. Parent app = orabpel
б. User Manager = Use JAZN LDAP User Manager
2. edit file Oracle_Home\j2ee\OC4J_BPEL\application-deployments\bpelPortlet\orion-application.xml
<jazn provider="LDAP" location="ldap://host:port" default-realm="us" >
<jazn-web-app auth-method="SSO"/>
</jazn>
3.Oracle_Home\opmn\bin\opmnctl stopproc ias-component=OraBPEL
Oracle_Home\opmn\bin\opmnctl startproc ias-component=OraBPEL
4. Register BPEL provider
http://bpel_host:bpel_port/BPELPortlet/providers
а. Login Frequency = Once Per User Session
636 - OID SSL port
389 - OID non SSL port -
I suddenly cannot send mail, I get the message I am not connected to my provider I seem to remember I had a send button of a paper airplane on my mail page and now I have to look under messages to find the send
Please describe in detail what happened when you took all the applicable steps in the support article that led you here. That's the starting point for any further efforts to solve the problem.
-
I cannot receive email properly on either my IPad or my IPhone. I have had them for over a year and they have always worked fine. Until three days ago, when they both started acting up. On the IPad, when I open mail, it says it is downloading about 1,700 emails. At the very end, which takes quite a while to get to, I finally get the most recent ones. The IPad is sending emails just fine.
On my IPhone, when I open mail, it says it is downloading 100 emails, but it doesn't do that. And it gives me no new emails at all. The IPhone is sending email just fine.
I have already deleted the email accounts on both devices and reinstalled them. I've contacted the Internet service provider and verified all the right settings. The Outlook email on my desktop is working perfectly.WMV is a heavily-compressed format/CODEC, and the processing time will depend on several factors:
Your CPU, which is not that powerful in your case
Your I/O sub-system, which is likely a single HDD on your laptop
The source footage. What is your source footage?
Any Effects added to that footage. Do you have any Effects?
Each of those will have an impact on the time required.
The trial has only one main limitation - the watermark. Now, there are some components, that have to be activated, but are not with the trial, but they would be evident with Import of your source footage, if it's an issue.
Good luck,
Hunt
Maybe you are looking for
-
Audio scrubbing just moves audio clip
Hello; I'm a new iMovie user and I'm just finding my way around in the program. I have an old G4 with iMovie 4.01 and I can't seem to get the audio scrubbing to work. According to the Pogue book on iLife 04, "In iMovie 04, for the first time, you can
-
Hi, can any one tell how to disable the copy and paste functionality of the text items in the forms 11g. Advance Thanks.
-
Question about the difference between Creative Cloud Single and Complete packages / Photoshop
I am an Adobe Photoshop / CS / CC novice so I apologise in advance for however silly this may come across. If I purchase Photoshop through the 'single application' package will I get to use Creative Suite to its full potential (masking, layers, shar
-
Moving Lightroom Database.lrcat to a diferent location
I think I have looked everywhere to find an answer to my problem I created too many libraries and it is very difficult to find my images. Now that I understand how LR works I understand the big mistake I made is there a way to export Lightroom Databa
-
Is there any automatic bookmark-organizer addon for Firefox to organize my bookmarks?
Is there any automatic bookmark-organizer addon for Firefox to organize my bookmarks? Because I have a lot of unorganized bookmarks, and it would take a long time to organize them, considering I now have too many and want to finally sort them... Like