Xperia Z1 C6902 firmware update

Can someone give me C6902 firmware changelog with a little description?
Please
I am currently running 14.2.A.1.136

Hello
Sony doesn't usually release changelog along with the release of the new firmwares, but when it does, it's only for major android version updates listing new features and bug fixes of major bugs
All that is posted on http://blogs.sonymobile.com/ whenever a new update is released.
Also you could search at xperiablog.net (Unofficial) and XDA about the firmware you want as users themselves are a great source of reporting changelogs
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Similar Messages

My Xperia S (LT26i) firmware update problem and slowing problem

Hi, I have Xperia S (LT26i) and i tried to update my phone to 6.2.b.1.96 firmware using PC Companion bu couldn't accomplished. It gave a error after long pressing the volume down button and starting the firmware update process. So i had to turn back to old firmware. Secondly my phone is so slow. Facebook is opening approximately 20-25 secs. and gives "facebook is not responding" messages while using. Same is for telephone and browser. I factory resetted the phone a couple months ago and i dont want to reset the phone regularly. Can you give me an advice? Thanks in advance...

A clean update
Performing a system repair using PC Companion - This will factory reset your phone and erase all data
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP

Xperia Z1 14.1.G.1.534 Firmware Update

Xperia Z1 Android 4.2.2 14.1.G.1.534 Firmware Update Rolled
Confirmed on LTE C6903 version.
RAM management improved. Have you got this update ? Mention the changelog if you have.
SOURCE - http://www.xperiaguide.com/2013/09/22/xperia-z1-android-4-2-2-14-1-g-1-534-firmware-update-rolled-ou...
Don't forget to give Kudos.

What kind of battery drain issues did you have? - Mine is draining battery quite fast aswell. 6 hours of use on wifi and its done.
To poster, i got the update today. But I'm also searching for what it fixes.
I found some information here:http://forum.xda-developers.com/showthread.php?p=46020073 , its seems like the update courses the device to heat less? - seems like my device still heats up, the same.

Xperia z1 (c6902) NOT CHARING after updating to 14.3.A.0.757 please help ???

I'm from india Recently i updated my xperia z1 to 14.3.A.0.757 firmware and i stuck up with a strange problem my phone not charing i.e is if i connect to wall charger there is no sign of indication led light or charge icon appears on phone when i checked my battery status its showing discharing only even after i connected to charger .Also i noted the user guide that after complete discharge battery down (to 5 or 10 %) it takes few min to show such indication but in my phone nearly a hour been there is no sign of charging .i completely fed off with this problem. i made following not helped1.i visited to service center they told me that may my charge connector problem and took for observation and they reinstalled the firmware that time it was charging no problem they returned to mesaying no problemafter the long use and when charge comes down when i plugged wall charger still same problem presists when i connects to my pc its showing there is no connector problem also2.theni tried hard reset using vol+power button still no sign of charing3.everytime i have to give factory rest then only my phone starts to charing this is not fair at all to give factory reset everytime to charge my phoneis my battery problem or the update version 14.3.A.0.757 has bug ??? even stamina mode not showing exact battery statsi seen the following buggs on this firmware update 14.3.A.0.757sometimes error camera not availwhile during call nav buttons hiddenater updating new movies update not showing its missing ver starts with 6.2..etc dont rememberstil camera touch to focous not working also some times camera not freezing while i using camera hardware buttonheating issue still remainsas sony said this is Bugfix update they fixed the bug only the audio sound bug and given few other bugs even the audio bug i managed but this i can't so,sony plaese if you note this message please make something soon to fix following issuesdid anyone facing this problem pls share your experience so suggest some idea to solve my problem

Hi there
No change :-/ still last night I charged my phone upto 100% and was using without stamina mode and by morning charge came down to 50% I jus checked with wall charger there is no sign of charging no led indication + charge icon also I seen the battery stats it's still showing discharging only. Also I checked out the diagnosis test it's says that device is charging over socket charger
I'm really confused with this problem any idea I had this phone 22 days old after making this update I facing this problem also the stamina mode is not functioning properly all the time when I made switch off & on battery shown 50% to 46% it indicates that battery reading is not functioning or my battery problem how come it could be I own this phone not even a 20 days too :@
Will this message Sony sees or not
give a solution for my problem I spended 40k for your brand. Even the service centre people not understanding my phones problem doing there same procedure as doing software upgrade and giving me telling that it's charging no problem
How can I replace my phone??
If I asked for replace they telling no way to replace and now they Ll open the phone and repair it and gives Ll water proofing ll be there after the this??
Accidental replacement from Sony it's simply to cover people's mind they won't replace at any shake they ll give a repaired phone or old second hand phone which has other problems this all I learned from Sony authorised service center in chennai

Xperia Z2 Firmware Update via PC Companion = FAIL!

I appologize if this is a duplicate post. I searched the forum before posting but it seemed similar posts weren't exactly the same issue(s) I'm experiencing.
I'm getting the notification that there is a firmware update for my Xperia Z2 tablet but that I am required to use PC Companion to download/install it. However, for some reason PC Companion refuses to detect that my tablet is connected. I've tried multiple usb ports and two different computers. Under device manager it doesn't show any device driver issues and the usb drivers are installed and up-to-date. However I constantly run into error message after error message. The tablet is set to MTP mode and connected via the included Sony usb cable. I've followed every wizard, prompt, guide, etc. but in the end PC Companion still says there's no phone/tablet connected. Would be so much easier if it would just download the update to the tablet like EVERY other android device I own does.

Did you take a look at this?
http://talk.sonymobile.com/t5/FAQ/USB-connection-problems/m-p/348074#U348074
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Brazilian Xperia Z2 (D6543) Firmware

Good Afternoon,
I want know why Brazilian Xperia Z2 (D6543) firmware are very old? To Internaltional Xperia Z2 alredy got 3 newer firmwares but brazilian none. Why?
"Sorry for My English
Solved!
Go to Solution.

Still it has to be approved in your country, if you bought this phone in a different country then the update has to be approved and released in that country, or you can manually update the phone
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

UK Sony Xperia Z1 Kit Kat updates for unbranded phones?

I have a UK generic unbranded Sony Xperia Z1 (i.e. I purchased my phone outright, not through a carrier) and am experiencing distorted audio and dropouts with Bluetooth when connected and playing music to some devices. My phone is running Android 4.3 Sony update 14.2.A.0.290.
I read Sony have fixed the Bluetooth dropout and distortion issue with a later firmware 14.2.A.1.136 but Sony PC Companion and Sony Update Service will not upgrade my device beyond firmware release .290 (I've completed a 'repair' using both PC Companion and Sony Update Service and the phone is still on 14.2.A.0.290).
Has Sony not produced a later firmware update for the non branded UK phones since 14.2.A.0.290? I see the branded phones have got Android 4.4.2 Kit Kat in the form of update14.3.A.0.681, how long will it be before this version is available to UK users who bought their phones outright?

Hi
I'm currently having a conversation with Sony Xperia Contact Center (!) in regards to the Bluetooth issue with the .290 update, and why Bluetooth worked fine with the previous Android 4.2 update. I've pointed out to them that techincally the phone is not fit for purpose (legal term) in its current state. Awaiting their response
----------------------------------- :o) --------------------------------
Don't forget to fill your signature up with graphics so it makes reading a thread harder

E60 firmware update @ Nokia Service Center

Folks,
when the E60 firmware update came out I already did know that I a have to visit the local Nokia Service Center (in Vienna) to get the firmware update, because I am a Mac User. These funny guys at the local Service Center then updated the firmware to the same version which was already installed?! Very smart... finally I found out that there is no firmware update for the E60 available at the Nokia Service Center at the moment. There is a chance that this will happen some day in near future...
Come on Nokia; how does this work?!? Every PC user can download the update from the Nokia site but the folks at the local service centers have to search in their print-outs if their is any update available - sounds anachronistic, doesn't it?
So, can anybody tell me, when I can expect the E60 firmware update to arrive at the local Nokia Service Centers (in Austria)?
Thanks,
bj
- bj

The warranty with the phone is only valid in the Country / area in which it was sold.
The ebay seller in the US probably got it cheaper abroad, and sold it on... Even if it was from the USA, the service centres wouldn't update it for you.
The only thing you can do is keep checking the Nokia Software Updater
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Rv082 v3 bricked during firmware update

     I have an RV082 hardware version V03 that has been in service for about a year.   I tried to update the firmware to 4.2.2.08 from 4.1.1.01. All appeared to be going well, then the browser timed out. I waited a while (10 + minutes) and powered down the RV082, then powered it back up.
     On boot all lights flashed, then it settled on the LAN link 1, DMZ Mode, internet, and system lights all lit solid green, but the Diag light lites red for 5 seconds, then out for 5 seconds over and over.
     I have tried the recovery TFTP procedure (hold reset down while booting, release when Diag light lites, run RV042_1.3.7.2_050727.exe). Booting with the reset button pressed is the same as without. The recovery utility generates an "Login Fail" error in a separate red window after about a minute (with 192.168.1.1 in the address). When I click OK in that it exits the recovery program
     I also tried the method of hold reset for 5 seconds during power on then look for firmware update page at http://192.168.1.1. I server not found.
     I can Ping 192.168.1.1 and have the computer set to 192.168.1.5. Using an IP scanner I can see the RV082 MAC address and IP address but nothing else.
     I scoped out the power supply. It is providing 5.07 VDC both connected to MB and open. Ripple is <.003 Vpp.
     The unit is several months out of warranty.
     Is there any other procedure for unbricking these units? I have the wherewithall to JTAG but don't see how to do it on this.
     The unit has been replaced with a new one, I would just like to get this one back to life as a spare.
Thanks for any help
jon

/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/398147
Soft & Hard Reset won't work for you mentioned on that page b'coz you are on S40. try everything else.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Macbook4,1 10.6.8 and firmware update - what went wrong?

Macbook 4,1 2008 2.4Ghz (not unibody). I recently reformatted my hard drive and reinstalled 10.6 from the Retail DVD and all seemed to go well. The MB was working fine up to that point. I then set up the MB (network, date and time, etc.) and repaired permissions.
I then checked Software Update and downloaded and installed the recommended updates to 10.6.8.
Again, all seemed to go fine. System booted and I repaired Permissions again. I went to the Apple web site, a couple of other web sites, and Software Update found another update to install: Firmware. Though I don't remember what version.
I clicked OK and it installed.
Upon reboot, it seemed to install okay.
But then I left the Macbook and it went into Sleep.
I didn't come back to it again until the next day.
When I pressed a key to wake it, I got what I now know is the screen that appears after you wake it from SAFE SLEEP. As per this Apple KB article: http://support.apple.com/kb/HT1757.
And this is where the problems started.
After the MB woke to the Safe Sleep screen, which shows the desktop a little "out of focus", the progress bars started filling in from left to right, BUT before they completed, the screen went BLACK.
And it has had a problem with black screen ever since. I can boot the MB from internal or external HD or from DVD, and it seems to boot fine. Boot chime, Apple logo, spinning wheel, then at the point where it pauses, blue screen, then goes to desktop, instead the screen goes black.
It finishes booting, but seems to go into Sleep.
I can wake it by pressing a key, but the screen either comes on and goes black again after 10 seconds, or I get the Safe Sleep wake screen, and then it goes black after 10 seconds.
And at boot or when waking the MB, the front LED flashes 5 times. There are no error beeps.
I've tried changing RAM, but problems remain.
So what's all this? Any ideas?
The display doesn't seem dead, as it works to boot and wake. The MB works fine with external monitor.
It's weird, but I can't think of anything apart from the Firmware update. The problems started right after installing it.
Unfortunately, this model of Macbook doesn't have a Firmware Restoration image to download and burn to CD. It is the ONLY Mac at this point that doesn't have this!
I called Apple support and even bought the 49 Euro Pay Per Incident service, which proved to be the same as throwing 49 Euro out the window. The only "technical" support they provided was to Reset the SMC, which you can find out about FOR FREE at the Apple website. And which I'd done anyway. I'd also reinstalled the MacOS. Don't want to beef too much, but sheesh, you've already got a Macbook that might need costly repairs, and they make you pay 49 Euro BEFORE they even ask you about the problem and what you've done to try to solve it. I'm tempted to say "ripoff". I mean, if all they can offer you is the advice to reset the SMC - which Apple offers for free at their website - then that's pretty poor service for 49 Euro, to say the least.
Apart from the wasted 49 Euro, I'm pretty peeved about the Firmware update (or so it seems) wrecking a perfectly working 2008 Macbook. I don't know how to convince Apple of this, but I'm certainly going to try.

Thanks for the reply.
Re. the Displays setting, the Macbook display isn't recognized and mirroring isn't an available option.
I've scoured the net and the idea of replacing the PRAM battery may be something to try. I read a post by a guy with a Macbook logic board screwed up by a Firmware update, which he solved by replacing the PRAM battery, as when you disconnect it you reset the logic board.
Which capacitor?
No luck so far with talking to Apple. I will try to get hold of someone a little more tech savvy and/or in a position of authority, as it seems that the Firmware is the culprit. Obviously a million other things could go wrong with a Macbook, but given the timing here it looks like the Firmware. Firmware updates can and occasionally do screw up a computer, as most manufacturers will warn you before you apply the update: PC makers, printer makers, etc. And they probably warn you that it's all your responsibility if anything goes wrong. But re. the Apple Firmware update:
1) it came thru Software Update
2) there was no warning
3) to make things worse, there's no Firmware Restoration image that I can burn to a CD to reflash the logic board: this is the only Apple computer that doesn't have a Firmware Restoration option
I'll try to get thru to a manager and convince him/her that the firmware may have been the cause.
Do you think an authorized Apple tech might have access to some way to do a firmware restoration? Something not avaiable to mere mortals? Because if not, the only solution looks like a new logic board.

New symptoms since latest firmware update

OK I have a 1tb sky hd box which hasn't had any really annoying issues up until the new firmware update (the one with the new Kids tile which is annoying in its own right). Anyway, I have been watching the cricket on SS2 and every so often when they break for a short advert between overs I've lost sound when it tries to revert to DD5.1 after switching from 2.0 on the adverts. I have to change channel and back again to get the sound back. Also, for the first time, my planner was showing empty today so I had to do a planner rebuild which solved the issue. Still, at least they seem to have solved the sound dropout issue. So just heads up for anyone else with a 1tb box who experiences the same issues.

(Quoting Karl Petersen here:)
There's a bug in iMovie 6 that makes it impossible to re-edit (Update) photo clips previously imported with the Ken Burns checkbox ON. The source photo, normally stored in the Media folder of the project, is (inappropriately) discarded when you empty the iMovie trash. The clips Update as black clips and the preview is usually black too, if I recall.
The workaround is to 1) drag the photo from the iMovie trash to the iMovie Clips pane; or 2) never empty the iMovie trash.
Sue

Cisco Router tried to take a firmware update and no longer works

Ok so internet was working fine until Cisco Connect told me to take an update. My connection is wired and there were no disruptions during the download. Yet the download still failed and now my power light blinks continuously and there is no internet access. I tried instructions on "How to unbrick your Cisco Router", even got them to work, it took the firmware update from the cmd line. Still doesnt work though. What's wrong with this thing and how do i fix it?
Solved!
Go to Solution.

I ended up downloading a firmware utility program and was able to get it to reload. The power light became solid somewhere between 2-5 mins, however still didnt connect to the internet. Found that all this factory resetting will change your Internet access name & password, with no way to find out the new one. You have to remove the Cisco Connect program from your computer and reload it from the original disk. Only then will you be up and running again. While I appreciate the response Helm, I was way beyond a 30 second reset button solution when I posted this lol.

Macbook 2008 4,1 serious problems after 10.6.8 and 1.4 firmware update

I'm having a problem with my 2008 2.4Ghz Macbook. After doing a fresh install of 10.6.0 with a Retail DVD, the MB was working perfectly, absolutely no problems at all. I then ran Software Update and installed all the recommended updates to 10.6.8, and I only noticed in passing that there was a Firmware update to do too, as reported by Software Update. I ran that as well and, IIRC, it was applied after fully updating to 10.6.8 and after rebooting twice. The MB rebooted, ran the Firmware update (which seemed to complete fine, as the progress bar completed normally against the grey screen), then rebooted. Again, IIRC, after running the Firmware update, and I'm now at 10.6.8, I started a Repair Permissions and left the MB for a while. It was the next day, maybe 15 hours later, when I went back to the MB and it was in Sleep. I pressed a key to wake it and this is when the weirdness started.
The screen was "fuzzy", sort of out of focus, though I could see the desktop, and what I could see was: the Disk Utility window open on Repair Permissions (which had completed normally) and several Vertical Segmented Bars running across the bottom part of the screen, at about the height where the Firmware Update progress bar was. These bars were filling in from left to right. IIRC, it may have looked a little like when you wake from Deep Sleep (or Hibernate, or whatever it was called). Like when you Wake from Sleep after the battery has run out and then you plug the AC adapter in.
Anyway, before the Vertical Segmented Bars progress was completed, the screen went black. Pressing keys didn't bring the desktop back.
I did a forced shutdown, reset the SMC, then rebooted. No startup chime. The Superdrive, hard drive and fans spun up, but the screen remained black. After a few reboots, I got a desktop back, and tried to reinstall from both an external HD (with Restored disk image) and the Retail Snow Leo DVD. Both times, the MB booted to the startup screen: with the external HD, I held down Option and chose the Snow Leo install; with the DVD, the MB started normally while I held down the C key. The boot started from the HD and the DVD, but after about 60 seconds, with Apple logo and the spinning "cog wheel", the screen went black. And seemed to shut down. With the external FW hard drive, the drive made a loud click, its LED went off, then it came back on after a few seconds, as if it had lost all power to it, then the LED lit up when power returned to it from the shut down MB. Anyway, the installs failed.
I then attached the 2.4 MB to another MB (2.1) in Target Disk Mode and it booted fine into TDM. It showed up on the 2.1's desktop, I ran Check Disk and it checked out okay. I then looked under Startup Disk and the 2.4's disk was listed there, with 10.6.8.
I then booted the 2.1 from the 2.4's disk and it booted fine. I ran check Permissions, and a huge list of permissions to repair came out. At this point, I've left things as they are. The 2.1 is booted from the 2.4, the latter used as external boot HD.
I then replaced hard drive and RAM. Tried to boot from DVD and install, got to Apple logo and spinning cog wheel, but after about 2 minutes the screen went black.
I then connected an external monitor and rebooted from the DVD. The external display received a video signal and I got to the Snow Leopard install screen. All this time the Macbook display has remained BLACK.
I went to Disk Utility and reformatted the new drive, then started the installation, which completed fine. The Macbook runs normally connected to the external display.
Any thoughts?
Why would the Macbook display work fine at boot (Apple logo, etc.), but then cut out after about 2-3 minutes?
Why would the Macbook screen remain black while I got a video signal on an external monitor?
Does this sound heat-related in some way? I should note that while booting from the DVD and now installing Snow Leopard, the fans are going pretty fast.
I just want to point out that this was an absolutely pristine, impeccable Macbook until these recent problems. It is in fantastic condition, none of the usual chips out of the top case and trackpad area. After the latest fresh install of 10.6.0 it was perfect upon reboot. Fast, perfect Airport and Bluetooth, FW and USB worked perfectly with a FW drive and USB mouse I hooked up. The update to 10.6.8 via Software Update seemed to complete fine.
Then all the problems started AFTER THE FIRMWARE UPDATE.
I don't know how much stock can be put in the firmware update being the cause of the problems, but the sequence here would bear that out. These are also somewhat unusual problems, at least in my experience.
One of the odd things was when I first went to wake the Macbook after the firmware update: the "fuzzy", out-of-focus screen and the segmented progress bars. And it was just before the segmented bars completed progress from left to right that the display cut out and went black. And from that time on, I've had the aforementioned problems.
Any ideas or links to similar problems would be greatly appreciated, e.g. possibly firmware related, or where the Macbook screen works but goes black after a couple minutes. And now that I've been able to connect to an external monitor, it would seem that the video signal is okay too.
Thanks.

Just to update.
After leaving the Macbook unplugged and without battery for a few days. I reset the SMC and, with no battery installed, I've just now rebooted and:
1) the first time, it booted, but no chime, and when the display turned on, once again I got the "out of focus" desktop AND the segmented vertical bars on the desktop (and the bars were filling in from right to left); the display went black after about 10-15 seconds;
2) I shut down and swapped some different RAM, then reset the SMC again and booted without battery. This time I got the boot chime and the Macbook booted to the Apple logo screen and spinning cogwheel. After about 2 minutes, the cogwheel stopped spinning, as if to boot to the desktop, but then the display went black. The front light started to pulse after about 10 seconds, and the Macbook appeared to be in Sleep.
3) I woke the Macbook from sleep by hitting a few keys and this time it went to the desktop. This is the first time it's gone to the desktop since the problem started.
I had enough time to see that everything appeared normally on the desktop, such as the time and date, Airport was connected, etc. And then the display went black again, after about 10 seconds.
At this point, I can now always get to the desktop, but the display goes black after about 10 seconds. I have just enough time to press a few keys and the Macbook does respond.
4) I shut down and reinserted the battery. Here's where new problems show up.
With the battery inserted, and the Macbook in sleep, if I hit a key, the DVD spins up as the Macbook is waking, BUT now the front sleep indicator light FLASHES (blinks) 5 TIMES. No beeps.
The Macbook still gets to the desktop, like before, and the screen goes black after 10 seconds.
I found some info on the Apple site re. 5 flashes (Article 21502):
If you don’t hear beeps, but the sleep indicator light flashes five times when you start it up or wake it from sleep, its battery may need service. Take the battery to an Apple Authorized Service Provider, such as an Apple Retail Store.
For more information, see the Apple Support article below.
You can continue using your computer before you service the battery. Use a different battery, or connect the computer’s power adapter and plug it into a power source.
Note:If you use your computer without a battery or with a faulty battery, you could lose all unsaved changes if it’s unplugged while it’s on.
BUT, the battery is not defective, as it works okay in another Macbook.
I should also point out that the problem with the 5 indicator light flashes or with the battery did not exist before the 10.6.8 and the Firmware 1.4 updates.
Any ideas?

No updatable devices found after firmware update

Unfortunately I didn't check here before doing the latest updates. I dl'd the following on the night of July 1:
2007-07-01 01:49:08 -0400: Installed "SuperDrive Firmware Update" (2.1)
2007-07-01 01:49:31 -0400: Installed "iTunes" (7.3)
2007-07-01 01:49:35 -0400: Installed "Safari 3 Beta Update" (3.0.2)
2007-07-01 01:53:02 -0400: Installed "Mac OS X Update (Intel)" (10.4.10)
2007-07-03 00:30:01 -0400: Installed "Audio Update 2007-001" (1.0)
Since then each time I restart the computer the SuperDrive Update launches and tells me no updatable devices have been found. But this machine has a SD, unless I'm very much mistaken. Why won't the update take? Is it related to the ex HD issues I've been reading about here with 10.4.10?
I also just looked at my sys log and it could be its own novel since these updates. I was going to post it in hopes it would help the Mac guys smarter than I, but I think it would flood out this post.
I am also having the internet drop issue, again only when I'm on battery power, but I understand that's a bigger issue than just my machine. My Safari windows seem to be hanging and giving me the spinning beach-ball a lot when I try to scroll.
I ran disk repair on permissions, that's all sorted out. I don't know what else to do to resolve the firmware update. Please help. Thanks!

At the risk of sounding stupid.. how would I delete the download?
And if I have a SuperDrive, which I do, why wouldn't the update apply to me and why would Software Updater have prompted me to download it in the first place?

Does anyone know how to solve: "Firmware update failure. Disk write error"?

Hi all,
Here is the list of all what went wrong and where I am now:
1. My Ipod worked well
2. I wanted to update it, you know, the normal thing with Itunes
3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
4. I took my external drive (where my music is) at work and tried again: same result.
5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
Thank a lot for your answer

Hi Cyrille,
Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Xperia Z1 C6902 firmware update

Similar Messages

Maybe you are looking for