Xperia z1 Problem AFTER system update to latest software 14.3.A.0.681

Hello people, First of all let my just say that I am new into the ''smartphones world'' so please excuse my queries if they proof to be 'obvious' to you! I have carried out a system update to my Xperia Z1 phone yesterday (Android 4.4.2. kitkat, latest available software 14.3.A.0.681). The update seem to have been correctly performed. However I have since encounter the following issues/problems with my phone and do not know how to fix them: 1) First of all my phone will no longer rotate...why is this? Is this related to the update?? Pictures/photos can no longer rotate and also phone screen does no longer rotate! Why is this..? 2) Second the 'Notifications Bar' structure has changed : is this also the result of the update or can I do something in settings to fix it and make it as before? When I scroll dawn the notifications bar, the icons are no longer displayed at the top line but are instead spread underneath BUT this is AFTER I press 'Quick settings'. 3) Battery signal icon has changed completely: no lines included inside icon to show usage but instead usage %age is now displayed. Also, when I charge my phone, there is no icon flashing as before and now lights flashing.. 4) Also when I want to use the phone after it has remained unused for sometime it states 'swipe to unlock' and makes a 'funny' note upon performance of the act: this was not the case before.. Can you please help me with the above? I am freaking out because I am excited with my new phone and would love to make full use of it properly but it is a bit hard for me since I have no clue how to fix issues/problems appearing every now and then since I am new into these things.. Thanking you in advance

Hi there,
I think you have fixed your 1st issue.
2) Yes, Kitkat has changed the Notification Bar structure. Its a bit annoying, but to get around it you can use Widgets - Tools and select the Icon, such as WIFI to be placed on your home screen to avoid multiple clicks. You cant do anything in the settings to make it like before.
3) Battery Signal Icon - Again a Kitkat update has done that. The good thing is that it has enhanced Battery life considerably.
4) I am assuming you are stating about the "sound note" it makes when you swipe in. Thats again a Kitkat feature and you can get rid of it though Sound settings if you dont like it.
Reality is that Kitkat runs very well on Google Nexus 5. Apart from that it has issues on every other Android power Smartphone out there. I also own a Nexus 4 who recently got upgraded to Kitkat and compared it with Nexus 5. Was not impressed to be honest.
As of my upgrade on Z1, I have been facing Volume issues. When I play a video the volume is minimized for some reason. Pause and play again and it goes to Normal. I have to reboot it sometimes to play normally. It also takes ages to connect to my 3G provider, whereas previously it was fast enuf. I hope the next upgrade will fix those issues.

Similar Messages

Wireless problem after system update

After installing system updates to OS X 10.3, the system stopped connecting to my wireless network. I'm pretty sure the updates were the cause, because I downloaded and installed the updates over the wireless network. The problem is not in the network hardware, because I am posting this thread over the same network from and IBM Thinkpad (that still works on the network).
The iBook can see and connect to the network, but it does not recieve and IP address. Any assistance would be appreciated.

I found some fixes to this problem if anyone is interested:
http://www.wwco.com/~wls/blog/2007/01/27/apples-security-update-2007-001-for-air port-breaks-internet-connectivity/

MySQL socket problems after system update

I have been using my new Mac Mini Snow Leopard server as Squeezebox Server for over a month wihtout problems. After a system update this weekend I started to get MySQL socket errors after reboot.
Started; log sequence number 0 43655
091213 17:10:04 [ERROR] Can't start server : Bind on unix socket: Invalid argument
091213 17:10:04 [ERROR] Do you already have another mysqld server running on socket: /Users/admin/Library/Caches/Squeezebox/squeezebox-mysql.sock ?
091213 17:10:04 [ERROR] Aborting
Although I have posted this issue to the Squeezebox forum (http://forums.slimdevices.com/showthread.php?t=72510) where it primarily belongs to I wanted to hear if anyone maybe had an idea what recent changes in Apple updates could cause this? Maybe someone else has similar MySQL problems with other installations? I am a bit desperate by now so any idea or hint is appreciated.

Here was my solution/workaround for this issue to the rest of us poor fellas that have too fight around with Squeezebox server from time to time:
I setup SBS to use the the standard MySQL installation on Mac OS X SL Server since I could get it to run without problems from Server Admin. Here are the instruction from the SBS Wiki:
http://wiki.slimdevices.com/index.php/ExistingMySQLInstance
However, I had to deviate a bit from that in order to make it work since it seems a bit outdated.
First deviation was necessary for the MySQL access privileges. Notice the extra grant to slimserver@localhost. Don't ask me why but this worked. I do also not know whether both grants would be necessary because I haven't tried it. Feel free to improve it:
# mysql -u admin_user -p
Enter password: admin_password
Welcome to the MySQL monitor.
Commands end with ; or \g.
Your MySQL connection id is 103 to server version: 5.0.24a-log
Type 'help;' or '\h' for help. Type '\c' to clear the buffer.
mysql> create database slimserver;
Query OK, 1 row affected (0.22 sec)
mysql> grant all on slimserver.* to slimserver identified by 'slimserver_password';
Query OK, 0 rows affected (0.13 sec)
mysql> grant all on slimserver.* to slimserver@localhost identified by 'slimserver_password';
Query OK, 0 rows affected (0.13 sec)
mysql> flush privileges;
Query OK,
mysql> quit
There were also slight differences necessary in the preferences setup because MySQL socket location was different from the standard one. Here are my db entries ~/Library/Application Support/Squeezebox/server.prefs:
dbpassword: slimserver_password
dbsource: dbi:mysql:database=slimserver;mysql_socket=/var/mysql/mysql.sock
dbusername: slimserver
Notice the extra mysql_socket configuration.

Small problems after system update

I have a couple of problems which appeared after a recent pacman update. A lot of stuff was updated, including the kernel and xorg.
1) Shutdown stalls at "Save system clock".
2) Ctl-Alt-F(1-6) doesn't get me out of X11. Actually, this works sometimes, but usually not.
I could fix these, if I knew where to start. Can anyone help me with some diagnostics? I have a pretty simple setup, no desktop, just ratpoison and the apps I need for work, mail, web.
Can I redo an update, and if so, how? Is there (ever) any point in doing that?

man hwclock:
--directisa
is meaningful only on an ISA machine or an Alpha (which implements enough of ISA to be, roughly speaking,
an ISA machine for hwclock's purposes). For other machines, it has no effect. This option tells hwclock
to use explicit I/O instructions to access the Hardware Clock. Without this option, hwclock will try to use the
/dev/rtc device (which it assumes to be driven by the rtc device driver). If it is unable to open the device (for
read), it will use the explicit I/O instructions anyway.
The rtc device driver was new in Linux Release 2.
So as you can see, directisa is something that SHOULDN'T do anything on your system, but for some reason it is failing. I'm guessing it is very specific to your hardware, though I've never heard of this happening.
Last edited by codemac (2008-02-11 05:13:04)

Xperia T problems after JB update

Hi,
I'm having some issues after updating to JB. My biggest issues is that when I tap an app, it wont load. If I repeatedly tap it might load, and if it does I can get it to resume from the app history menu.
I also have problems disabling and enabling wifi, either in settings or on the widget.
I've tried resetting the phone.
Any ideas?

I suggest that you try to run a software reinstall using SUS.
http://www.sonymobile.com/gb/tools/update-service/
If the problem still remains you should contact your local support team, to have the phone examined and fixed at an repair center.
http://www.sonymobile.com/global-en/support/contact-us/contact-info/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

ADSL / fglrx problems after system update [Solved]

I'm hoping that somebody will be able to help me with this as I'm struggling to find the answer elsewhere in this forum. I recently installed Arch 0.7.2 base. I then got my internet connection sorted using my speedtouch modem as per the instructions on the Wiki. (using pppoa). I the installed xorg7, and gnome. I installed the ati-fglrx drivers from the instructions on the wiki. Up to this point, everything was working just fine.
I then decided to update the system so I did a pacman -Syu and all seemed to go well. After rebooting the machine, it would not start x and from the debug messages on the screen it seemed to be saying that it was having a problem loading the fglrx module.
I thought that I would try uninstalling the fglrx packages, then reinstalling and reconfiguring. I uninstalled them but then discovered that when I tried to download anything, my connection would be lost within a few seconds and wouldn't let me reconnect. The only way to reconnect was to reboot first. (I did find out that I had to do a modprobe ppp-generic first in order to connect since the update)
I then deleted my xorg.conf, and created another using hwd -x and then managed to get back into gnome using the default drivers - but obviously with no 3d acceleration. (I have a radeon 9500pro by the way). I tried connecting again and this time tested the connection through firefox. I managed to open 1 webpage before losing my connection again.
I'm sorry that I cannot post any logs just at the moment as I'm at work although I can later on. I'm just wondering for now if these problems seem familiar to anyone?

I have exactly the same problem as atalman.
My modem works fine, I can play eternal-lands/browse webpages for hours on end, but as soon as the modem is under any kind of heavy load, ie: ktorrent, amule, ebay (lots of images and open in new tabs) the connection dies..
I try
killall pppd
usually to find
pppd: no process killed
, so I then try
pppd call speedtch
which lets me know that the modem is already connected??
So I have to unplug/replug the modem in, pppd call speedtch, then it connects again on a different 'channel'.
dmesg shows no errors, I have enabled debug in the pppd settings which shows nothing, my firmwares are correct as Ive used the same on Slackware and Arch for ages. I originally thought the modem(rev 4) was dying so I swapped it over for my backup, an older manta/stingray version, different (working) firmware but all the same problems.

Problem after system update (base installed only) and other concern

I have had two strange problems upon updating from Arch using pacman.
1) My keyboard is no longer detected
2) The BIOS time seems to be eight hours behind. (Setting the clock to UTC from another distro sets the clock right since my time zone is GMT-8)
Does anyone have a work around?
Btw, here is rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="/usr/share/zoneinfo/America/Los_Angeles"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="myhost"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#gateway="default gw 192.168.0.1"
#ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond)
# End of file
I commented gateway="" and ROUTES="" since I am using dhcp.
I also have a concern about the latest kernel.
I decided to install and build the latest kernel (from a chrooted environment) and noticed that I got a kernel panic (upon trying to boot into arch) no matter what I did (about it not being able to mount the root filesystem from /dev/sdb2). I could enable old pciix support, but I got annoyed by the clock skew outputs when building. How are devices, particularly SATA drives, named and accessed now?
[edit]By the way, I have two separate kernel booting for Arch. Here's is my grub config for those
title Arch Linux
root (hd1,1)
kernel (hd1,1)/boot/vmlinux-2.6.16.arch root=/dev/sdb2
initrd (hd1,1)/boot/initrd26.img
title Arch Linux (modified kernel)
root (hd1,1)
kernel (hd1,1)/boot/vmlinuz-2.6.20 root=/dev/sdb2
Last edited by NoOneImportant (2007-02-13 23:16:22)

zeus wrote:
1) USB or PCI?
2) TIMEZONE="America/Los_Angeles"
3) What preceded a panic?
Most likely the name of disks was replaced. Look in output.
try Fallback image/ try UUID in grub/fstab
1) USB
2)I just tried to boot into arch and no dice.
3)
Starting balanced_irq
Using IPI Shortcut mode
VFS: cannot open root device "sdb2" or unknown-block(0,0)
Time: tsc clocksource has been installed.
Please append a correct "root=" boot option
Kernel panic -not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Last edited by NoOneImportant (2007-02-13 23:31:22)

Problems after system update

After i made the last updates of my z2 from my phone, i cannot use my cellphone or made any call even i canot open my contacts, it always made restart the system, i need help

Hi sherif_, welcome to the community!
If you can unlock the screen of your device you can back up your data, just open PC Companion and click Start under Backup & Restore and follow the on-screen instructions.
Running the repair:
1. Install and open PC Companion then select Support Zone.
2. Phone Software Update.
3. Start.
4. Repair Phone
5. Continue
6. Accept data removal
7. Next
8. Wait for prepare
9. Select Phone
10. Follow the connection steps
Best of luck, keep us updated.

Weird problems after System updates

I downloaded updates for iTunes and Java earlier this week, and now I have some weird behavior going on with my iMac. I'm running 10.5.8 and Safari 5.0.2. When I'm using the computer the windows have started jumping around, moving from side to side, or one window moving to the front, then the back, by themselves. There is sometimes a noise...hard to explain, but sounds kind of like bom, bom, bom. It's happened before, but usually goes away with a restart. Not this time, though...
Anyone else had this problem, and/or hopefully able to suggest a fix?

Hi,
Rule out any problems with the startup disk since the software is "jumping around" ...
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. M*ake sure there is always 15% free space.*
If the startup disk is ok, might be a good idea to run the Apple Hardware Test considering the, "bom bom bom" sounds, instructions here.
Intel-based Macs: Using Apple Hardware Test
Carolyn

Problems with System Update 3.14.0019 after installation SP2

Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
After this upgrade I view this error: "An error occurred while gathering user information."
Thanks for the help

A known issue. It wasn't supposed to be supported until SP2 is RTM. However, look at the stickied post in the forum for some bad news about SU.
x61s

After I updated the latest iso 6.0.1 my speaker is problem

After I updated the latest iso 6.0.1 my speaker is problem.
Only the upper one and all the rest is working good ( loud speaker and headset).
Just only the one I put on the ear.
Please help !!!!

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Lack of 3g after system update

Hello :-)
It's problem with Xperia E dual
Few days ago I updated the system to the 4.1.1 version (compilation 11.3.A.1.39).
Unfortunatelly after updating I've discovered that smartphone don't works with 3G. On the display I've only icon "E". Before updating there was typically "H". Of course now the transfer is slower than before and of course I'm not happy of that.
I try to solve this problem - choose in menu list of available provider and... there are only 2G nets. Because I've functioning still in the same place of live and the problem has occured after the updating I'm sure that it's strictly connected.
Is there any solution for that?
Another problem is with trying to call. After system updating typically twice a day I have to restart smartphone because it's totally hanged. No one can connect with me and I can't call to anybody. Smartphone looks normally and doesn't give any siglan that something is wrong. But when I try to connect to somebody I direst the number and... there is no signal at all. After few seconds telephon return to main menu. There is also no record about this trial of connection in the list of done connections. It's very uncomfortable situation.
Sure, there are also some adventages with the system updating but problems mentioned above are really annoing.
Have you any solutions for it?
Thanks in advance.
Rafal
Solved!
Go to Solution.

Hi, try repairing phone software with PC Companion or Update Service.
http://www.sonymobile.com/gb/tools/pc-companion/
http://www.sonymobile.com/gb/tools/update-service/
Be aware that this will erase phone data completely, backup if necessary.
Before proceeding with software repair, confirm with your Network Operator that there is nothing wrong with the network. Also, remove and reinsert SIM card and try again (have a close look at the contact surface, ensure that it is relatively clean).
Don't forget to mark correct answer as Accepted Solution.
If you find the post helpful, press Kudos.

Multiple Samsung Stratosphere problems after FF1 update

There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update. Some were replys to older posts and some only touched on a single issue. I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
Summary: Verizon and Samsung have finally updated the Stratosphere almost 1 year after release. This updated the phone from Android 2.3.5 to Android 2.3.6. Going by filename, this is known as the FF1 update. This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
There were some noticable changes in this update:
-Lock screen has changed. The puzzle piece and glass lock options have been removed. New options have been added, such as facial recognition unlock.
-Call answering screen has changed, introducing the option to ignore call with a message.
-Camera now has digital zoom ability.
-Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
-Phone icon has changed ever so slightly
-Wifi icon now included up and down arrows to indicate data is being sent or recieved
-Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
-The visual voicemail app has been improved (I have personally not used this feature)
-Callback number is now supported in text / picture messages
-Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
-Update to how the device deals with the end of scrolling. It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll. (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
-(I am sure there are more. please list any others you may have noticed)
I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
-The biggest problem is with wifi connectivity. Upon an initial connection to wifi, everything works great. After somewhere between 15minutes and 2 hours, problems start happening. Its as if the wifi keeps hanging or reconnecting. Download speeds (tested with the SpeedTest.com app) slow to about one third of normal. Apps like Facebook that require a constant connection will just time out.
-It appears the signal strength for 3g and 4g connections is lower. There are places where I used to get a 4g connection, and now I only get 3g. Some palces I fall back to just 2g digital.
Another minor issue i found was with text messages. When you reply to a message, it no longer automatically focuses the text in the input box. You have to first click into the box to start typing. Not a huge deal, but one more step to take over and over. Minor annoyence.
At my house, I struggle to get a 3g or 4g signal. I depend on wifi for my data connection. So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home. Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
-Complete factory reset on my phone. (did not help)
-Pull battery and SIM card out of phone for 15 minutes. (did not help)
-Went to a Verizon store. The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update. He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
-I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP. Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address. Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this. I have a NetGear N900 router, and I can not change teh DHCP lease time. It appears, however, that my router is not sending out "forever" leases. But just to make sure, I gave my phone a static IP. (None of these steps made any difference).
The only thing that temporarily fixes the problem is a reboot of the phone. This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
I have now had this update for over a week, and on 2 phones. I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
I am asking Verizon or Samsung to at least confirm this issue if possible. Maybe there are newer revs of the Stratopshere hardware that don't have this problem. Or there is something unique about my (and apparently others) situation. But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
Thank you for your time.

Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
Message was updated by David Rensberger

I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectal

I tried to update the latest software update for my MacBook pro (which was on 10/12) and after it started to update it restarted like normal but when it started back up it was running painfully slow and none oft programs will open.They all quit unexpectedly. iTunes microsoft word all of them quit unexpectedly. Help!

Exact same problem with my 2010 MBP 2.4ghz 4gb ram 10.6.8. iTunes said update was needed, Software Update ran with various updates including a security update, truthfully didn't pay much attention, I always install the Apple updates. After the restart it took 3-4 times longer than normal to get to the login screen, same to get to the desktop but I'm familiar with that occurring on update restarts. Unfortunately it got worse from there. Performed a full shutdown and startup. Same long boot. After the desktop finally loads every mouse button press received a 2 minute beachball. I use menu-meters and both processors are under 10%. Waited a few minutes for disk utilities to launch, repair permissions estimates 3 hours for a typical <10 minute process. Activity monitor shows nothing over 10% CPU most of the time however ReportCrash pops to the top often. Any suggestions would be greatly appreciated. BTW zero problems until this update.

Iphone 4s says: "Replacement needed" after i update to latest ios

my iphone says: Replacement needed after i update to latest ios...is the apple change the my iphone for free or they repair this?thanks anyone knows about this problem?

Yes, I tried. But nothing is working. I am feeling bad as such a costly phone stop working in 1.4 year ?
I am just sharing my experience.
I am not ranting but yes angry as I am eligible for upgrade in Nov 2012 so don't want to pay $149 for replacement as I can upgrade to iPhone 5.
Apple expert please help me how can I fix it. It's completely software issue.

Xperia z1 Problem AFTER system update to latest software 14.3.A.0.681

Similar Messages

Maybe you are looking for