Xperia Z1 touch Not Working

My Xperia z1(C6902 touch is not working,after I have put it under water.I am from India in state maharashtra city Mumbai.I work for sonyxperia mobiles,it's a demo handset given by company to me.I don't understand wat to-do now.Please Solve the Issue

Hi,
I'm sorry to hear that.
But since it's a demo unit, I suggest that you contact the person and/or the company that you have received the unit from. They should be able to give you further assistance in this matter.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Xperia M touch not working

    Yesterday in the morning my Xperia m touch stopped to work... I went to the Retailer and he said my touch was faulty and replaced it... Today too same thing happened the touch is not working.... The thing is I have two alarms sety for the morning..... The touch stopped working (both times) when the second alarm rang.... During the first one it was fine... I even swiped the screen to shut the alarm... Is something big wrong with my phone??????

    Hi @Bk201 You can also try this: 1- Do a backup of your device information: How to backup?2- Then try to repair your device using PC Companion. I hope can be useful. Best Regards,

  • Connecting my iphone to wall charger makes my iphone touch not work properly

    I have a iphone 3g and a orignal apple wall charger when i connect my iphone to charger it makes my iphone touch not work properly, but it charges the phone properly.the data cable is also working properly. So can any one help me out here.thanks

    Holy smokes, I thought I was losing my mind, but that's the exact same thing that's started happening to me since this whole 4.3.1 "upgrade" disaster started - hooking it up to the wall charger overnight, wake up in the morning and it's a brick requiring multiple attempts to restart.
    It's also randomly and spontaneously crashing - it'll be on the table or couch beside me, I'll catch movement out of the corner of my eye and look over and see a silver apple.

  • Nokia Lumia 720 Touch not working even after repla...

    Hi ,
    I had bought lumia 720 on 31/05/2013 , but on 28/12/2013 the touch was not working or the touch was working on its own. Since my phone was in warranty then, they replaced the touch free of cost. But again from 20/08/2014 my phone is having the same problem, touch not working. When i showed it to Nokia care, they told that again they need to replace the touch , it will cost around Rs. 7950 (since my phone was out of warranty this time)... My question is, within 1 year 2 months , twice the touch pad has problem. What kind of phone it is .... Please think before buying Nokia touch phones, I think still they are far behind in touch screen technology ( no offense :-)  )....
    Not only me, one of my friend also facing same problem with Lumia 720 ....

    Not beeing familiar with other countries consumer laws and consumer rights, I can only speak for my self and Norway. But as far as I'm concerned I would have expected extended rights for the new parts and the labour. - If however the fault can relate to the parts involved with the mentioned replacement.
    But if this is not possible in your country, there isn't much to do other than repair it for pay or leave it.

  • Is there a fix to touch not working? All updates are done. Intermittent problem

    Is there a fix to touch not working? All updates are done. Intermittent problem

    Do a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
    If that does not help, take it to an Apple store genius bar and have the techs check it out to make sure there is not a hardware issue.

  • HT1351 Now update v.ios7.1 my iphone 4s..after update with itunes look have something about assistive touch not work

    After to update ios7.1 have something it wrong.assistive touch not working some before

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • HT4623 i cann't reset my iphone the phone speaks arabic touch not working properly

    i cann't reset my iphone the phone speaks arabic touch not working properly

    Triple tap the home button to turn off VoiceOver.

  • 1st Gen iPod touch not working correctly?

    I have a 1st generation 8GB iPod Touch. It's not working correctly.
    My biggest problem is that, unexplaiably, certain areas of the screen don't seem to register touch anymore. There is a sort of "L" shape on the left and bottom edges of the screen that won't register touch, making it impossible to move applications to the previous page on the home screen and making it hard to use the keyboard/buttons while in portrait mode. It's extremely frustrating to try to change the volume while playing a song, as I now have to either put the iPod in sleep mode then double tap the home button or flip it to cover flow and double tap the home button to do it.
    http://i38.photobucket.com/albums/e140/Vipershark/IMG_0001.png
    (Highlight the image to see it better.)
    This is a screenshot of the working/non-working areas that I made using the Whiteboard application. The white area that you see (excluding the little half circles of black which are extended brush strokes and not actually working areas) is the area that doesn't work. I can't seem to figure out why it happened, as I've never dropped or otherwise damaged it. It just happened one day, and I don't know why.
    But I can't fix it. I've tried everything. Upgrading (I'm now running iPhone OS 3.0 which still didn't fix the problem.) didn't work, restoring didn't work, deleting everything and restoring from factory settings didn't work.
    I'm also having a few other problems as well, though they're not as bad. My home button seems to stop working sometimes and sometimes the entire screen witll stop registering touch until I put the iPod to sleep and turn it back on. It also seems to go a lot slower than usual.
    My iPod is less than a year old. Can you help?

    Vipershark,
    I had a very similar problem this past weekend with my 1G 8GB iPod touch. But with me, just the left side of the screen wasn't registering my touch. I could still access the bottom section, which you cannot.
    The good news for me is that I fixed it and I hope it works for you as well. What fixed it for me was resetting all my settings. To do this, go to the settings icon, then click on general, and then on the very bottom is reset. Choose "reset all settings."
    Apparently this is different than a restore through iTunes, which you tried. I also tried that earlier and it did not help.
    Of course, the reset solution I used relies on you being able to access all of the correct buttons, so I hope you can!
    Please let us know if this works for you. If not, since it is less than a year old, it is still under warranty. Contact Apple and see what they can do.

  • Home button on ipod touch not working!!! how can i fix it? no warranty!!!!

    my ipod touch home button is not working everything on the ipod works fine but the home button. i have to turn off the ipod and then turn it back on as a substitute fix. has anyone else had this problem? if you have any ideas or know how to fix it please help!!!! I've read that if i put a drop of alcohol or acetone on the home button it should fix the problem but im affraid of adding liquid to it and it stop working all together.

    You can continue using the iPod without the home button:
    Hardware Defect: Home or Power Button
    (Note that I am a representative of the organization for the above link, which is not endorsed by Apple)

  • New iPod Touch not working with G3 iMac

    I got a new iPod Touch (4 gig) for Christmas. Tried plugging it into my iMac Power PC G3, and I get an error message. ( error OxE000001). Is my iMac too old to work with the iPod touch?
    Also as a second issue, I have a wireless network, but I don't have it broadcasting it's name for security. When I turn on my lap top, if it doesn't automatically find the wifi network, I just type in the network name, and it pops up.
    Any way to do this with the iPod Touch? (Type in the network name, even though it's not broadcast)
    I'll also list this question on the WIFI section.

    Ken;
    I AM running with iTunes 9.0.2. in my slot loading G3 iMac. There is no special Hack.
    You tried to help me earlier, when my G3 just would not work after I upgraded Safari and iTunes. I ended going to the Genius bar, where they worked on it for hours to get it going again. They installed earlier versions of both programs.
    I was going to keep it that way, until I was given an iTouch for Christmas. The iMac just did not see it. I was resigned to updating my iTouch through my son's iBook.
    In a question I had about upgrading my wireless network, John Galt said his 500mhz G3 worked OK with the iTouch. Over two weeks I slowly installed what he had, (or close to it) I think Safari has a G3 version, that I may have missed when you were helping me.
    The last thing I upgraded was iTunes 9.0.2. After three or four tries, and plugging in the iTouch USB cable directly into the iMac, the iTouch was recognized! It seems to work fine over the past week or so.
    Some odd things I have to live with. When I plug in the iTouch, iPhoto will start and ask about downloading pictures from the iTouch. I have to manually start iTunes if it is not already on. It does not automatically start like it does with my iPod nano.
    Also I did not realize how slow this machine is, I thought down loading a CD through a La Cie DVD/CD player at 1.3x speed was fast. My son's iBook downloads a CD a 9 x speed! Oh well... slow but steady.....

  • IPOD TOUCH NOT WORKING WITH ITUNES

    I am using:
    iPod Touch 16GB 1.1.4 (With $25 Software Upgrade)
    Windows Vista Premium Edition
    iTunes 7.6.2
    Whenever I connect my iPod, the device connect sound is made and it shows up in the my computer window, but it will not show up or sync with iTunes.
    I HAVE ALREADY TRIED THE FOLLOWING:
    Reseting the computer
    Reseting the iPod
    Using a different USB port
    Using a different cable
    Erasing ALL of the iPod's contents (Yes I lost my $25 update as well)
    Restarting the "APPLE MOBILE DEVICE SUPPORT" in the "systems" application
    ...As well as many other things, all with absolutely NO results.
    I have tried to manage my ipod through other programs, nothing seems to work. I connected the iPod to a different computer and everything worked fine.
    I ASSUME the problem has something to do with the iPod Touch's drivers; for whatever reason they might be corrupted or installed incorrectly, thus preventing the iPod from automatically reinstalling them as well as preventing the possibility of syncing.
    My question is, how can I reinstall the drivers without having the iPod touch do it automatically?
    Any help would be much appreciated, thanks.

    I fixed the problem myself.
    If anyone else has this same problem and is looking to fix it, here is what I did.
    I found this on another site:
    "Okay well I spent about an hour on the phone with Apple trying to fix this problem. The guy I talked to seemed to have delt with this problem before. He tould me that Apple was getting numerous calls about the iPod touch not connecting with iTunes. So here is the solution that worked for me.
    The first thing you must do it uninstall iTunes and Quicktime using the controll pannel, add/remove hardware, on your windows computer. Once you have uninstalled both of thoes programes go ahead and look for anything else that is Apple and uninstall them as well. There should be an Apple updater or driver that is very critical to uninstall, this was the cause of iTunes not recognizing the new iPod Touch. Next make shure you have the very latest update for Windows on your computer, you can check this on Microsofts web page. Finnaly once you are shure you have UNINSTALLED EVERYTHING that says Apple, iTunes, or Quick time restart your computer and MAKE SHURE THAT YOUR IPOD IS NOT CONNECTED TO YOUR COMPUTER. Then download the newest version of iTunes and install it. Once the installation is complete go ahead and connect the iPod Touch and everything should work.
    I am not shure if this will work for everyone but in my situation it worked. I hope it helps some of you out there!!"
    That worked like a ******* charm. Hope this helps.

  • IPod touch not working through USB in car

    Does anyone know how to resolve an issue with the new IPod Touch 4th gen just purchased not working through car stereo. Have a new Toyota camry touring. You can hear sound when connected when you slide to unlock or go into an app the sound goes through the speakers fine but the radio face says loading and won't go any further, if you then try to go to the music screen it says connected so you can't get into the music to try to play. Has anyone else had this problem and resolved it. Not sure if the software of the radio can be upgraded to suit maybe at service?? Not really sure. Any help would be great

    Have you contacted your auto dealer? Some users have reported problems with there car systems not worked with the latest iOS. I searched the iPod Touch forum for Toyota but did not find any previous posts concerning Toyota.
    Have you tried resetting your iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • Why does my iPod touch not work in hot climate

    just returned from holiday and iPod touch would not work while sunbathing but was ok when returned to hotel room. Does it shut down if temperature is too hot?

    Many thanks, Apple do indeed still sell the iPhone 4S however you are limited to 8GB which is quite restrictive but here's the link http://store.apple.com/uk/buy-iphone/iphone4s However new... Ebay, but check the seller, Carphone Warehouse but will be on contract and maybe Amazon, other than that I would do a bit of research and check if there are any other retailers, due to the popularity of the iPhone 4S it is rare to get a brand new high memory capacity phone, best of luck in your search

  • My kids ipod touch not working, What can we do?

    I connected by mistake the charger of my ipad 3 , to my kids ipod touch 4g, now the ipod touch does not power on it only displays the apple logo and then turns off, then it turns on again but only the apple logo and then turns off again, i tried reset it in itunes and did not work, What can we do? Thanks a lot for your help....

    Apple Support recommends the "5 Rs": reset, restore, reading, 'riting, and 'rithmetic.  I'm kidding about the last 3.  Check out the iPod section of Support.

  • Touch not working while charging

    My iphone 5 touch is not working properlly while charging

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    -Griff W.

Maybe you are looking for

  • Why does De-interlacing looks better with MPEG StreamClip?

    For our client we need to render 1080i for TV and 1080p for WEB. After creating graphics in AE we add final touch and audio in PR. If we make it progressive in PR (CC2014.1) the zoom in the packshot does not look good. However if we make the 1080i Pr

  • Extra Paragraph in Table of Contents

    I have a TOC set up in a three-column text frame, and have it set to balance columns. When I generate the TOC, it gives me an extra paragraph return at the end, which messes up the column balance. ny way of fixing this?

  • Storing multiple Sine waves in one LVM

    Hi all, actually i got a very short question. I can't believe that i'm unable to fix the problem by my own... But that's the way it's suppose to be I think. The question: Just a simple Sine wave in a while loop, connected to a graph. When I run it i

  • SAPUI5 custom button control based on SAPUI5 button

    I would like to build a custom button with. The reason for this is because I reuse this button a lot of time. - It has two style classes. - The button should extend the SAPUI5 button. - Uses the jQuery append() function. How I built my button up to n

  • Scan Productions duplicating Productions

    Hi, this is driving me nuts. I have a scan production configured to my capture scratch. All project and media are scanned and productions with the directory name are created correctly. This is configured to only scan until the medias inside the root