Xperia Z2 doesn't identify National Roaming

Hallo. I've a big problem.
I've got H3G an Italian Operator. When there isn't network with H3G , my device goes in Roamin with TIM.
The problem is that my device doesn't identify TIM network like a Roaming and it doesn't stop data dispatch with data roaming disabled. So I can't block data dispatch and I've charge cost.
I think that this is a bug in the firmware. I've this version: 17.1.2.A.0.314
Does it possible to resolve?

You might have to contact your local Xperia Care
http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

Type of service during national roaming (MVNO)

I'm using the MVNO network BOB in Austria which is part of A1 and uses A1 national roaming. I'm not seeing the type of service (4G, 3G, GPRS) because its only showing the "R" symbol all the time. This issue does not exist on the AOSP or Google Play editions of Android. Please fix this issue!

I have the same problem in Slovakia. O2 has a national roaming agreement with Telekom (T-Mobile) whith no additional cost for customers for both voice and data. The same would be true for the new operator Swan Mobile (only it's still not known who will be the roaming partner). There are also some virtual operators (MVNO) like Funfon, Tesco Mobile, etc., which use another operators network.
I have a SIM card from O2 and if I have the data roaming disabled I cannot transfer data if using Telekom's network even if it will not cost additional money. If I enable data roaming it's possible to use all networks for data. But as I live in Bratislava which lies almost exactly on the border to Austria and Hungary (and by the way it's capital city of Slovakia) I should disable data roaming, because it happens frequently that I'm connected to Austrian or Hungarian networks.
I found on the internet, that it's already solved in the 4.2.(something) version of android (something like seperate setting to enable national roaming), but it's not possible in the Xperia M2 with Android 4.4 (Kitkat), which is the actual latest version for Xperia M2.
Sony can you please fix this?

HT1386 itunes detects my ipod but doesn´t identify it

i´m having problems with my ipod because itunes doesn´t identify it so i can´t update iOS 4.3 for downloading apps or anything....the only thing i can do is charge the battery....
¿what can i do???

Have you tried here:
iOS: Device not recognized in iTunes for Windows
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- try anmother cable
- try another computer

Safari is giving me a pop up that says "Safari doesn't identify this website". It comes up every time I search. please advise. thanks

Safari is giving me a pop up that says "Safari doesn't identify this website". It comes up every time I search and when i press continue the webpage doesn't load properly. please advise. thanks

1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
2. Select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Xperia Z3 doesn't remember Wifi

Hey everyone!
I just got the new Xperia Z3 and while I find it to be a gorgeous phone, it has lots of software issues.
One of those is the fact that it doesn't remember Wifi networks anymore. I have to re-select the network and re-enter the password every time. Does anyone know a solution or should I return the phone?
I have read that removing all remembered Wifi networks helps, but this solution is unacceptable to me as I travel a lot and have over a hundred networks remembered in my Google account. I'd rather stop buying Sony products than have to re-enter those networks again.
Thank you!

@chickideee
Sorry to hear that you have this issue as well.
Would it be possible for you to take a report from the phone when this happens and send it to me?
First you need to enable the developer options menu. To do this, go to Settings -> About phone and tap the build number 7 times.
When this happens the next time, go to Settings -> Developer options -> Take bug report -> Report. When a report has been created (it may take a little while) you will get a notification. Tap this to share it to for example Google drive and then send me a PM here on the forum.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Xperia Z2 doesn't work

Hello,
I have an Xperia Z2 and it hasn't been working for the past few days.
When I try to boot it up, the phone takes abour 4 times as long to boot up, and when it finally does, it brings me to the language screen that you usually get when you first turn your phone on. Additionally, there are errors popping up. The errors have the following content: "Unfortunately, [everything] has stopped working." where [everything] is literally every application that comes with the phone.
I have tried using the SONY PC companion, and my phone doesn't connect with the method that the software suggests. Namely, when I'm holding Volume Down and inserting the usb cable into my device, nothing happens.
I have also tried using the Emma software, nothing happens when I follow the instructions.
This is an amazing phone that I really like and I'd appreciate any help that would contribute towards solving my huge frustrations over the fast few days.

You might have to contact your local Xperia Care
http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Xperia Z2 doesn't load

Hello,
I'm french, so I apologize beforehand for my bad english...
I bought my Xperia Z2 10 days ago.
Friday's night, I put it to load. Since that, impossible to turn it on.
It doesn't want to load !!
Has someone got a solution for me ? Different of send back to SAV...
Thanks for your answers !!
Pauline

You may need to perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 60% battery.
Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Xperia T doesn't charge when power is off

My Xperia is not charging when power is off. Normally it showed a battery when I put this phone in the dock for charging, but nothing happens. It will only charge when the power is on....What can I do to make the phone charging with power off?

http://talk.sonymobile.com/t5/Xperia-T-TX/Sony-Xperia-T-does-not-power-on-most-likely-after-low-battery/m-p/279859#M1938 http://talk.sonymobile.com/t5/Xperia-T-TX/Xperia-T-LT30p-doesn-t-turn-on-no-lights-when-plugged-no/m-p/363892/highlight/true#M6425

Measurement & Automation Explorer doesn't identify my racks

I'm using Measurement & Automation Explorer V4.0.3.3003. When I install the software some of my devices are not automatically identified.
The devices are:
1.) PXI 8176
2.) PXI-1045 (chassis 1)
3.) PXI-1045 (chassis 2)
After I manually identify these devices, then my configuration tree looks correct.
Any ideas why these devices aren't automatically identified?

Hey Jim!
The auto identify feature wasn't introduced until a later version of MAX. If you get a chance. Please update your drivers!. You can download our updated drivers at http://joule.ni.com/nidu/cds/fn/p/lang/en. Thank you Jim!
Best Regards,
Song Mu
National Instruments San Diego

I am trying to set up two monitors on my Pavilion 6330f PC system 7 but doesn't identify DVI

Product name Pavilion 6330f PC System 7
I've tried to connect two monitors but it does not identify the VGA monitor connecte to the DVI port with an adaptor called aDVI-A M to SVGAf Adaptor. When I go to the Control Panel >type in Monitors> click on multiple monitors, it only identifies the VGA connected. How do I use multiple monitors without adding another video card?

Hi,
The problem could be on the adapter, you need a converter because DVI to VGA is from digital to analog. An adpater alone can't do this work.
Hope this makes sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

ITunes Doesn't Identify iPods Correctly

I have two iPods, a Mini and a Nano. My original iTunes 6.0.3 install on Windows 2000 Pro correctly recognizes the Mini and Nano as different devices with different names and updates them accordingly. It also properly manages the saved On-The-Go playlists.
I recently bought a new Windows XP Pro laptop, and want to move iTunes over. I installed iTunes 6.0.3 and copied the My Music\iTunes directory. Once everything works properly, I will uninstall iTunes from the W2K machine.
My music library is fine, but iTunes on the XP laptop can't distinguish between the two iPods, identifying them both as "USER1" instead of their configured names. It cannot manage On-The-Go playlists on either iPod. I upgraded from 6.0.3 to 6.0.4 without solving the problem.
Firmware on the Mini is 1.4 as reported by iPod Settings - About. Firmware on the Nano is 1.0 by the same method.
Any suggestions? Thanks in advance.
Gateway Windows XP Pro
Dell Windows 2000
Dell Windows 2000

hiya!
My music library is fine, but iTunes on the XP laptop can't distinguish between the two iPods, identifying them both as "USER1" instead of their configured names.
hmmmm. i think we'd better check up on this possibility:
Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear
love, b

Why does my xperia Z2 doesn't run wifi?

I'm having problems with the wi fi of my xperia z2, I recovered the system to have it like new, and when i did it, the wi fi did't run, i don't know why, it keeps like plugin the wi fi but it never runs

Do you have a wifi network so you can test?
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Tomcat 4.1 class problem. Doesn't identify the class.

Hi
I just installed J2SDK and tomcat in windows xp. I've made jsp files and beans. The first page is customerlogin.jsp which takes user id and password in a form. It sends the request to authenticate.jsp. Would you please give me a few important steps that need to be done?
My directory structure is as follows:
C:\Tomcat 4.1\Webapps\Log -> jsps
c:\Tomcat 4.1\Webapps\Log\WEB-INF\classes\Log -> java beans
The jsp doesn't find AuthenBean class. It complains about it.
org.apache.jasper.JasperException: Unable to compile class for JSP
An error occurred at line: 1 in the jsp file: /authenticate.jsp
Generated servlet error:
[javac] Compiling 1 source file
C:\Tomcat 4.1\work\Standalone\localhost\Log\authenticate_jsp.java:43: package Log does not exist
Log.AuthenBean Authen = null;
^
******** AuthenBean is : *********
package Log;
public class AuthenBean{
     String userid;
     String password;
     public void setUserid (String tuserid) {
               userid = tuserid;
     public void setPassword (String tpassword) {
               password = tpassword;
     public String getUserid() { return userid; }
     public String getPassword() { return password; }
******** Authenticate.jsp ***********
<jsp:useBean id="Authen" class="Log.AuthenBean" scope="session"/>
<jsp:useBean id="select" class="Log.ExecuteQuery"/>
<jsp:setProperty name="Authen" property="*"/>
<%
String id = Authen.getUserid();
String passwd = Authen.getPassword();
out.print("User id is " + id);
out.print("Password is " + passwd);
%>
<%@ page import="java.util.Vector" %>
<% Vector aResult = select.getResult();
select.connect();
boolean idCheck = false;
String query = new String();
query = "SELECT EMPLOYEE_ID, FIRST_NAME, LAST_NAME, PASSWORD, COUNTY, AREA FROM EMPLOYEE, LOCATION WHERE EMPLOYEE_ID = '" + id + "' AND PASSWORD = '" + passwd + "' AND (EMPLOYEE.LOCATION_ID = LOCATION.LOCATION_ID)";
select.select(query, 6);
select.disconn();
int size = aResult.size();
if(size > 0){
idCheck = true;
if(idCheck)
     session.setAttribute("loginId",id);
     session.setAttribute("firstName",(String)aResult.elementAt(1));
     session.setAttribute("lastName",(String)aResult.elementAt(2));
     session.setAttribute("county",(String)aResult.elementAt(4));
     session.setAttribute("area",(String)aResult.elementAt(5));
%>
<jsp:forward page="customer.jsp"/>
<%
else
String error_msg = "Error: User Authentication Failed!";
String link = "customerlogin.jsp";
session.setAttribute("prevPage", link);
session.setAttribute("errorMsg", error_msg);
}%>
****** web.xml in Log\WEB-INF is **********
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>Log\AuthenBean</servlet-name>
<servlet-class>Log\AuthenBean</servlet-class>
</servlet>
<servlet>
<servlet-name>Log\ExecuteQuery</servlet-name>
<servlet-class>Log\ExecuteQuery</servlet-class>
</servlet>
</web-app>
Your help would be appreciated
Thanks!

Your problem is in web.xml. Only servlet classes need to be mapped. Your bean class should not be.
****** web.xml in Log\WEB-INF is **********
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web
Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>Log\AuthenBean</servlet-name>
<servlet-class>Log\AuthenBean</servlet-class>
</servlet>
<servlet>
<servlet-name>Log\ExecuteQuery</servlet-name>
<servlet-class>Log\ExecuteQuery</servlet-class>
</servlet>
</web-app>
If you have only jsps, u mau use
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web
Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
</web-app>
Hope it works.
Hafizur Rahman
SCJP

Xperia Ion doesn't run after update

i updated my Xperia ion correctly. I do all step's as said in manual and on screen. After i removed usb cable, phon restarted and on display only stay logo of SONY. I wait for 2 hour's but nothing happened. What is the problem ?
Every problem have a solution, sometime's fast sometime's slow.
Solved!
Go to Solution.

Disconnect the phone from the PC, turn it off and start the below process as this will allow you to reinstall the firmware with the phone powered off during the process:
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Illustrator CS3 doesn't identify links (pictures)

Hello,
I'm trying to open a file that contains a picture in it (jpg/psd/etc...)
it immidiatly tells me there's "error occured" and i need to repair/replace the file, when i do that it doesn't do anything.. again it tells me to repair/replace.. it happened to me in every file i open.. i don't know what to do, please help

Finally, this is really Bonjour's error:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb400982&sliceId=2

Xperia Z2 doesn't identify National Roaming

Similar Messages

Maybe you are looking for