Xperia Z3 back cover elevated itself

So I have been using my Z3 for about a month now, I recently noticed that my phone doesn't lay flat on the ground, it wobbles a little, then it starts to worry me, under close inspection, the back panel between the power button and the microSD card slot was elevated up, I am really concerned about it, is it because the overheating of the phone? The adhesive is melted by the overheating of the phone? I am scared that the phone will loss its waterproof ability…

Hi, a few similar posts regarding the same issue on the forum.....as mentioned contact your local Xperia Care or if you can take it into your place of purchase BUT do not let it near water in the meantime

Similar Messages

Sony Xperia U Back Cover

Hi,
I have really purchased Sony xperia u mobile which was having white back battery cover and lower panel. Somehow the back cover is spoiled and lot of black marks occured on that. I am trying to purchase black Original back battery cover and lower panel but I am not getting the same from anywhere. I am in Kolkata, India.
Can someone help me to get original back battery cover. I am not asking for the additional cover which we put to protect mobile but the battery cover.

Give Local Sony support a call and see what they say
http://www.sonymobile.com/global-en/support/contact-us/country/en_IN/
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Z1 COMPACT REPLACEMENT BACK COVER.

Sony Mobile! I bought my xperia z1 compact and it easily scratches itself. I want to replace the back cover because it acquired so many scratches in just a week of placing it in my pocket! The front i removed the asf! I called the service center here in Manila to inquire about the back cover replacement and it is 2500 pesos!!!! And they will add a 750 pesos labor!! This is not good! This is not how you provide support for replacement parts if i am within warranty! I think 2500 pesos replacement for the back cover is expensive and an additional 750 for the labor is robbery! We need a discount if we are within warranty! Call me 63998 971 8019! Btw we are mislead that it is scratch resistant! It is not!!!

I'm sorry to hear that.
I suggest that you raise this with your local support team to get further information about the warranty and how to proceed with this in the best possible way:
http://www.sonymobile.com/global-en/support/contact-us/contact-info/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Back cover self cracked

Hi
So here I am, it just happened to me, the back cover of my Z2 self cracked ! I left it on a shelf, inside it's pouch (Adore June case), and when I took it a few minutes later, the back was all cracked.
The phone didn't fell, nio shock at all, nothing. Temperature was ambiant, about 20°c, without any big variations.
So I'd say, for a piece a of technology I bought at the high price 2 month ago, it is just unbelievable, unacceptable !
It was my first Sony phone, and it will be the very last.
Other than that, I was really satisfied with it.....until it decides to harm itself !
Now the good part of the story is, when I contacted the seller (official seller on internet), they oriented me to their warranty service, who reacted very well and fast. I was about to send them the phone, for free, for an expertise, but when I called them, they advised me to wait, because they already had hundreds of Z2 with the same issue, and for now Sony hadn't accepted to repair under warranty !!!!
They told me they were negotiating with Sony, with the help of a consumers association, to make Sony accept their production deffective issues.
So voilà my story with Sony. I will keep you informed about the outcome, hopefully Sony will take their responsibility.
As soon as I will have my Z2 repaired, first thing I will sell it. And never again I will hear about Xperia phones !
I have a Z2 Tablet, which for now is very well and doesn't seem to want to Crack it self,.....
Final word : Please SONY, proove me I am wrong, and reply to me ; i can provide all details you would need to study my case and make your warranty work as it should.
Good luck with yours !

ShaunEls94 wrote:
i went to sleep and the next morning I have found that my back panel is cracked for no reason?
Can someone please give me the cause of this and how to fix it?
Ah, the spontaneous cracking glass, a mystery in it's own life time. Could you post some pics of it, more imprtantly, the edges of the phone.
I'm sorry, but this sounds about as likely to happen as the tooth fairy coming to give me money.
Either way, go to your local service centre to get it fixed.

How to add photo to BACK cover of photo book in PSE 12

I am trying to add a photo to a back cover in PSE12 photobook but cannot access the back cover page. There are only templates for title page and regular pages.

The templates in PSE are for standard hard cover photo books which have no photos at all on the covers. The front cover photo is seen through a cutout in the cover itself, not printed on the cover.
If you know who is going to print this for you, I would check their site for their online template that will let you do it, rather than trying to create the book in PSE.

Are there any problems using a back cover.

I want to protect the back of my iPad from scratches. Are there any problems using a skin or cover on the back?

Is it ok to cover the back of iPad 2? Won't it affect the cooling system? Coz I don't see any ventilation point and it may be the back metal plate itself which brings out the heat. I purchased a "Targus" back cover from apple store and it fits perfectly and beautifully also very comfortable to handle but I removed it thinking that it might harm., also Apple hasn't introduced any sort of back cover either, only the smart cover for the screen they have, may be coz the back is designed to be open to the air.

Problem in back cover of Z1

Hi
today I found that, the corner of back cover my xperia Z1 had opend! (about 2 mm)
In fact I bought it 10 days ago! and I recharged it only 2 time.
I leave my trust to sony mobile brand by this event!
sorry SONY

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I'm sorry to hear, but in this case I suggest that you contact nearest service center so a technician can examine your unit. You can contact your local support for further information about nearest service center and/or how you should proceed in this case:
http://www.sonymobile.com/global-en/support/contact-us/contact-info/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Inside Back Cover Fold-out (first-time question)

Hello, I have a new project that I will be starting in a couple of weeks in which I will be creating a 150 page booklet. What they are requesting is that the back cover fold out so that a floor plan can fit. What's going to happen is that there will be an ad on the inside back cover but attached and able to fold out will be a floor plan. However, the edge of the Inside Back cover will be perferated so that the floor plan can be torn out, if so desired.
I have created plain, saddle-stich magazines before, but this is my first go at a perfect bound booklet with a fold out like this. So these are my questions.
- Again because this my first time doing this, I was wondering if there is formal name for a back-cover fold out...How is usually referred to?
- They are unsure if the floor plan is going to take up 2 extra folds or 3 folds beyond that back cover...because I am unfamiliar with this process, i don't know if the printer has to set the amount of folds or if I can make it as many as I want depending on how the floor plan fits.
- (this question is about setting up the indesign file)
In normal magazines, the pages are setup in 2-page spreads, with the back cover being by itself. In order to set up this up, (and let's say the floor plan is set to 2 folds beyond the inside back cover), do I just add 2 pages to the right on the second to last page, and 2 pages to the left on the last page (which I know I can do by unchecking "Allow selected spread to shuffle")?
Thanks a lot for any advice, I surely appreciate it.
Kdubbie

If your cover is the only thing with a flap/foldout, you can save yourself a whole lot of time by creating a seperate file for the cover. And you can set as many folds as you want, as long as budget isn't an option (folds cost money and using a bigger page size usually affects the cost).
Set up the cover as one sheet with fold lines (setting a slug area is good for this). The folds for your map need to be smaller than the page size. This link might help: http://indesignsecrets.com/amazing-folding-calculator-pdf.php

Crack on the back cover

Is my expria z1 waterproof still works even if it has a crack at the back cover? I accidentally step on it.

Contact your local Xperia support, I wouldn't think it's waterproof but only they can check it.
http://support.sonymobile.com/global-en/contactUs/

I'm missing the back cover and flap for my book. Doesn't show up in the interface. How can I restore these?

I'm missing the back cover and flap for my book in the layout interface. Does anyone know how to restore these? I've searched the interface but can't find an option to add cover/flap. Don't want to order a book without it.
Any advice is welcome!

Time to repair you library: do the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.
3 - if necessary repeat with Option #1, Repair Permissions.

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.

Do I need a different back cover for wireless charging with the Droid Turbo?

Do I need to get a different back cover for Qi wireless charging on the Droid Turbo? Or do I just need the charging pad?

One thing to Remember there's usually a Sweet spot that the phone has to be right on to make it work, And just to be aware some wireless chargers can cause Warmness in the Battery and the Backs of the phone..
Here is some Accessories From Motorola for the Turbo: Just click on the blue Link
Power - Smartphone Chargers and Portable Chargers by Motorola
Music
Talk
Motorola

HT1040 I created a book, but in adding pages, somehow, the back cover and flap have now become pages, and there aren't and layouts now for the flap or back cover. How can I fix this?

I created a book in iphoto, and in the adding and deleting of pages, somehow the back flap and back cover are now showing as a page layout, and there isn't a back flap/cover anymore, and I can't seem to add it. I have spend hours on this project, is there a way to fix this without having to start all over?

Try cohnfamilly's solution posted in this topic: Cover Page Disappeared: Apple Support Communities
OT

Can I use an iPad 2 snap on back cover with the new iPad??

I will be buying the new ipad and i wonder whether an ipad 2 clear back cover can work with the new ipad...because its so early there wont be any ipad "3" back covers around

its in 0.6mm not 0.7inches
link: http://9to5mac.com/2012/03/07/the-new-ipad-has-10-hour-battery-life-is-0-6mm-thi cker-and-0-67lbs-heavier/
so 0.6mm is not significant if your using folio, leather, or silicon cases. Just not those form fitted hard covers, it will scratch it especially if you have a full body protector like invincible shielf, this will add additional 1.0+ mm to it.

Somehow I messed up creating my hard cover book. I don't have the back cover and flap. How do I get it back?

somehow I messed up creating my hard cover book. I don't have the back cover and flap. How do I get it back?

What version of iPhoto are you running? Where are you seeing this lack of back cover and flap.
A first try fix is this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If that doesn't help create a new book and see if the back cover and flap are in it. If so then it appears that your original book is damaged.
You can try rebuilding the library by launching iPhoto with the Option and Command keys held down and select the option to Repair the Database, option #3. If that fails rebuild again with option #4, Rebuild Database.
If that doesn't help then create a new book, verify that the back cover and flap is there and add the photos.
OT

Xperia Z3 back cover elevated itself

Similar Messages

Maybe you are looking for