Xperia Z3 Compact with Android 5.0.2 will not connect to Smartwatch 3

I am trying to connect my smartwatch 3  swr50 via NFC or Bluetooth, with no success. I am performing a bluetooth search, but the watch is not being found.
After several attempts, I did a bluetooth search from another phone running Android 4, and the watch was instantly recognized. 

The problem you have is that it's either already paired and the settings have been removed but the watch still thinks it's paired so won't pair to another device - You need to perform a system reset of the watch and then on your phone open Settings then apps and swipe to All then locate and open Android wear and clear data and cache then once your watch has rebooted and is ready for connection open Android wear and follow the connection guide - Had the same issue myself
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Similar Messages

  • My new iPhone 4s paired with my iMac but it will not connect to transfer files by bluetooth. It says the iMac is not supported!

    My iPhone 4s will pair sucessfully with my iMac, but it will not connect so that I can transfer files via bluetooth. It says "bluetooth network not available" or "iMac not supported". Just insane. What to do now??

    I can't pair my iphone 4s with my imac.  It is very frustrating.  I can walk by anything resembling a  bluetooth and my iphone with pair...but not with my mac.  Any assistance would be appreciated.

  • My iphone 3gs has a screen lock on it my gf entered passcode wrong to many times now phone is disabled and i cant figure out how to restore it with my itunes because itunes will not connect until passcode is entered which it wont let me do pls help

    how do i restore my iphone 3gs with itunes when i cant enter my passcode to screen lock

    You will then need to force the phone into recover mode (search Google).  All data on the phone will be lost.

  • I have Iphone 5 with 7 installed. Facetime will not connect. How do I fix this?

    I start face time either by selecting the contact then Facetime or go to Facetime then selecting the contact. It starts to ring the far party answers the phone says connecting then it times out and says that the contact not available. It does this even when my contacts call me. What is the fix for this?

    http://support.apple.com/kb/ts3367

  • Can't pair Xperia Z1 Compact with JBL Charge

    Hi,
    I can't pair my Xperia Z1 Compact with the JBL Charge (via bluetooth)...
    When I turn on bluetooth, the JBL Charge doesn't pop up in the list of available devices.
    If I try to do that with the Iphone I don't have no problem. The JBL Charge pops up and I can connect directly.
    Why doesn't see the Z1 compact the JBL Charge?
    Regards, Lars

    I just did pair them successfully, after a looong press on the JPB's on botton.

  • My Deskjet 3050 J610 will not connect to my Virgin WiFi router for use with Apple Mac laptop.

    I live in the UK and have Broadband access via a Virgin connection and WiFi router. My Apple MacBook laptop connects to the WiFi with no difficulties. However I have an HP Deskjet 3050 J610 printer which will not connect to the router. When I try to connect, the blue light just keeps on flashing but a connection is not found. Consequently my MacBook cannot "see" the printer on the network. Any suggestions? Thanks!

    See if this helps.
    Printer does not maintain wireless connection. 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I am having a issue installing Adobe Acrobat XI.  I am running Windows 8.1. When  go to install it gets an error.  The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

    I am having a issue installing Adobe Acrobat XI.  I am running Windows 8.1. When  go to install it gets an error.  The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
    I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014.  I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed. 

    Hi all,
    Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
    I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
    When I compile using "javac" I get an error saying "javac" is not recognised.
    When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
    Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
    I have removed all previous references to java in the registry editor.
    Please help !
    Regards,
    Vipul

  • Brand New C309g will not connect wirelessly with ANY wireless security options enabled

    Printer will connect via wired ethernet. I can use the http utility.
    Printer will connect via unsecured wireless connection.
    Printer defaults to autoconfig (169.xxx)when connected  via WEP (both open and shared), will not connect with a manual IP address. Cannot access http utility.
    Printer won't even autoconfig when connected via WPA-Personal - instead says "No connection found."
    Printer is in the same uncluttered room as the router.
    ALL OTHER wireless network devices work fine and keep up with security changes.
    I have legacy devices on the network that make me want to run with WEP.
    I've run the HP Network Diagnostic. It can access my router just fine. It cannot find the printer.
    Router is D-Link DIR-655.
    I jump through the right hoops - refresh router, restore factory defaults on printer, etc. All other wireless network devices work fine.
    I want to pull an "Office Space" on this brand-new printer - please save me from doing so!
    -mooi
    This question was solved.
    View Solution.

    Ooops, my mistake.  Thanks for pointing it out.
    Another idea is to make sure the firmware is updated on the router.
    Also, from the control panel of the printer: Setup > Network > Wireless Network Test.  It will self-test the printer radio.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have OS 10.8.2 and use wireless at home just fine. When I visit a friend with only a cable modem internet my Mac Book Pro will not connect. What do I need to do?

    I have OS 10.8.2 and use wireless at home just fine.
    When I visit a friend with only a cable modem internet my Mac Book Pro will not connect.
    I see that the Mac Book Pro is picking up the internet when I check the internet preference section but it will not open Safari.
    What do I need to do connect via a cable modem?

    You need to power off the modem for 15-30 seconds, then power back up and then connect. The modem is remembering the last connection (your friend).

  • My ipod touch has a usb cable picture with an arrow pointingto the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the powerbutton is pressed. what can i do to fix this?

    my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • After updating my wife's iPad to iOS6 the ipad will not connect to wifi on certain wireless routers. What can we do? Also, same for iPad mini with same router. But iPhone that has iOS5 has no problem connecting.

    Need help. Before updating to latest software iOS6 the iPad had no issues connecting on our home router. After updating the iPad will not work. We have a mini iPad with same issue. But I have a iPhone 4S that I chose not to update to iOS6, still has iOS5. It connects no problem to router. Our computers have no issues connecting to router either. There is a software issue with iOS6.0.1 that will not allow certain routers to communicate. What can I do?  Also, the mini iPad stated a newer version of software is out, version 6.0.2 which is supposed to correct the wifi problems. It has helped but still haven't connectivity issues. However, the iPad states software is up-to-date so we cannot update to 6.0.2 even through connecting to computer on iTunes. How can that be?

    Try going to settings, reset , reset network settings.

  • My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

    Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem.  Windstream tech service is useless.  i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help!  windstream said everything is working on their end, yea right.  What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products. 
    these are brand new machines with lion.
    This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great.  Please help before my wife losses it
    thanks

    There is a 2701HG-B, and a 2701HG-D.  If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
    By the way tell your wife it isn't that bad.  At least you have an ethernet DSL modem.  There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access.  At least now only the craziest DSL providers still use those modems.

  • My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

    My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My mac air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbook that is able to connect with no issue. HELP

    My macbook air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbookpro that is able to connect with no issue. HELP

    Reset the TC to factory and start again.
    Use all SMB type names for wireless and base station.. Not apple type names.. this is more important since Mavericks.
    I also recommend different names for the different bands.
    So for example.
    TC name.. TCgenx (I use whatever the generation number is for the x.. eg TCgen4 or latest one TCgen5)
    WIreless name.. TC24ghz for 2.4ghz
    TC5ghz for 5ghz
    You can also set the channel manually.
    If you still have issues.. start with no security and then if it fails to connect there is something seriously wrong with the laptop. Did you upgrade install Mavericks?? That can lead to driver issues.. I would recommend a clean install.

  • HT2292 I recently got a new ipod touch and the new one will not connect to itunes.  I've done all the troubleshooting and now I'm just plain frustrated.  With the new update my old ipod froze and best buy gave me a new one. What to do?

    My ipod recenly froze with the last update.  bestbuy gave me a replacement.  the new one will not connect to the computer or itunes.  i followed all the instructions and - nothing.  It's frustrating enough as i lost all my notes and work, but now I can't connect to sync with itunes.  i don't get it.  i'm not a supertech so i don't know what to do. help!!!!!!

    Thanks, Bob!  You are correct.  And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE).  One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
    1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind.  Only with the Security Mode set to DISABLED, could we gain access.
    2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
    Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers.  Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
    I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
    In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them!

Maybe you are looking for

  • Graphs show random characters instead of image in 11.1.1.6 post upgrade

    After upgrading from 11.1.15 to 11.1.16 any new or existing analysis with a graph is showing a block of random characters instead of the graph. For example, a simple line chart shows: 6NABcmBe33NAV9cyxeT52IcJe6YFmgsNIsRDMImGIpAevGSiC0t+0D8urHYnp0l+KR

  • Can't drag songs to playlist????

    for some reason, on my wife's itunes (not mine, mine, on the same computer is fine) it will not allow her to drag songs from her library into a playlist. I've never had this problem with mine, so I'm not sure what the problem is. Any help is greatly

  • Regd MSS FPM Configuration...

    Hi , we have implemented ESS & MSS business packages . I need to show the Appraisals and Qualification iview which is displayed under MSS >> Team >> Employee Information >> Personnel development  page in MSS >> Team >> Employee Information >> General

  • Varray, Nested Table and Object types in OWB r2

    Requirement: Flat file with repeating groups of nested content need to move into Object Relational ORACLE table (using varray or nested tables - no preference). The data will be loaded, then mapped/transformed into a richer O-R output to directly pro

  • Grapher... name of the function on the graph ?

    Hello, Could you tell me if it's possible to put the name of the function (with mathematical symboles) directly on the graph ? If yes, how do you do ? Thank you