Xperia Z3 Contact Pictures During Calls

Boot on safe mode and check if you experience the same issue
How to boot on safe mode.
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008

Hello guys I have the Xperia Z3 from Tmo and when I see my contacts I see the pictures on them but when I call them or they call me I get the blank default picture for them during the call. I have verify I dont have multiples contacts of the same or multi pictures. I reset the phone and in the first sync everithing was OK but after like one hour again the same probpem. I reset it and installed all apps one by one to see if one of them was giving me the error but everithing was OK after I intall them and after some hours again the same thing. I like this phone and I dont whant to go back to ios.

Similar Messages

  • Why apple remove the big size of the contact picture, doring calls! ???

    it possible that they will bring it back on the ios 8???

    donno you can tell them to do so using the feedback channel
    http://www.apple.com/feedback/iphone.html

  • IPhone 4 stays lit during calls

    My iPhone 4 stays lit during calls. It causes me to hit the mute, FaceTime and contact buttons during calls. I took my otter box off and it still does this. Can anyone help me?

    This is Proximity Sensor problem. This sensor is located on the Power Button Flex Cable. If the iPhone front screen has been replaced this is known problem. Restore iPhone with current iTunes on computer.

  • Iphone 4 contact pictures do not display with incoming calls

    iphone 4 contact pictures do not display with incoming calls. they did before the ios 6 upgrade

    I am assuming that you have associated a picture with the contact in the information for the contact

  • Contact picture for incoming call

    Why does the contact picture not show up when an incoming call is coming through?

    It does for me, and everyone I know.  Whithout any specific information from you, not even the phone model or iOS version, it's not possible to answer or help.

  • Contact picture for incoming calls!!!  Please help!!

    After I updated my iPhone to 7.1, my incoming calls now show the contact picture in a dinky little circle in the corner of the screen!  What happened to it being the size of the whole screen!?!?  Can I change that back!?!?

    Another horribly poor decision in Apple's ever-growing list of poor decisions.

  • Nokia E52 display caller's name and contact pictur...

    Can someone advise me on possible problem with my E52 - I am very pleased with most aspects of the phone but it is not showing the name of the caller or the contact picture when I receive a call (just the number).
    Surely it is standard for every Nokia phone to show name of caller? I know S Ericsson phones show name and picture for both call and text. Nokias should at lease display the name?
    Can anyone please advise on this?
    Thanks
    Solved!
    Go to Solution.

    generally this is the cause have a look here it might help some more
    you can take out sim card and see if you do have your contacts still on phone also
    /discussions/board/message?board.id=topfaq&thread.id=28
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Contact pictures when receiving phone calls

    I have some contacts which have pictures directly taken with my iPhone and naturally they display full screen when receiving a call. Other contacts however have imported pictures which display as thumbnails when I receive a call.
    Is there a way to either have them all display as thumbnails (other than using pictures not takes with the iPhone)?
    Thanks for any input on this.

    J.K. ROFLing wrote:
    According to wjosten in this thread: http://discussions.apple.com/thread.jspa?threadID=2502247
    Contact pictures assigned on your computer & then synced to your phone will appear as thumbnails, while contact pictures assigned directly on your phone will appear full size.
    This was in 3.1.3, but it should be similar in 4.0, although I haven't had a chance to test it yet.
    Thanks, yes, that is still the case.
    What I am trying to accomplish is, that ALL pictures show up as thumbnail. So, with all your replies it seems like the only way to do this would be to save the picture on the PC and then re-sync them.

  • ACCESS CONTACT LIST DURING A CALL

    HOW DO YOU ACCESS YOU CONTACT LIST DURING A CALL?

    While on a call, just press the HOME button - this will keep your call active. Then press your CONTACTS. To get back to your DIAL PAD, just swipe down the top bar to get to the active call and select it.

  • I called a contact and their current location showed up. I've never noticed or seen that before. Is that feature only available during calls or can I find current locations of any of my contacts?

    I called a contact and their current location showed up. I've never noticed or seen that before. Is that feature only available during calls or can I find current locations of any of my contacts?

    Your friend may have this turned on -
    Settings - Privacy - Location Services - scroll all the way down - System services - Share my location - toggle on

  • How to make the contact picture should appear on the upper right corner with thumb picture when some one calling instead showing the entire screen

    How to make the contact picture should appear on the upper right corner with thumb picture when some one calling instead showing the entire screen

    See deggie's response in this post... https://discussions.apple.com/message/8531821#8531821

  • IPhone Contact Pictures Fully Explained

    Hello Guys,
    Just wanted to explain fully how the iPhone contact pictures work and why some are large and some are small etc.
    In the very beginning if you added a picture to a contact on the IPHONE when you made a call it would show up as a LARGE image. If you added the picture via the Mac contacts app, when you called it would be a small image in the top right corner.
    Then what happened if you added a HD/large in data size image to a contact in the mac app, it would show in your iPhone (during a call) as a large image. This was because there was enough picture data to show the larger size.
    Now we come to Yosemite and iOS8........
    In iOS8 if you now view a contact on the iPhone and actually finger tap the contact picture it actually opens up the full image in the screen. This didn't happen before.
    Before if you tapped the picture nothing would happen.......now you can view the image and save it to the camera roll if you wish........
    Now.....in Yosemite if you add a picture on the Mac this is where is gets interesting....... It doesn't matter on the actually data size of the image. It could be 40kb or 4mb. What makes the difference between large and small when calling is the HEIGHT of the image.
    If you resize ANY image to 960px, when calling it will show the image as blurry LARGE!!
    If you make the image 959px or less in height it will show the image as small top right.
    So you have have a 5mb image thats 959px high and it will show as a small image when calling.......
    I hope that clears everything up for you guys!

    ckent007,
    What version of the iPhone software are you using?
    Are you saving the contact pictures (by tapping done in the edit contact screen) before you go to the home screen and use another application?
    Hope this helps,
    Jennifer B.

  • Contact Pictures not displaying in texts...

    At some point yesterday my contact pictures has stopped showing up in text messages. They still appear when calls are placed and in the actual contact information, but no longer are in texts. I have restarted my phone and also shut it off for over an hour to try to get them to reload. Any suggestions on how to fix this or why this may have happend. They were there yesterday morning then just stopped showing up...

    Thank you for your reply. These were contact pictures that I had specifically gone in and set for contacts (I.E. for my brother there is a picture of my nephew as his contact picture). I had to delete the pictures from the contacts and then just re-assign them, seems to be working perfectly fine now. I'm sure it was just some sort of glitch. 
    >

  • Contact Picture sync behavior

    Problem: I add a new contact picture on the iPhone, later sync: the pic loses its resolution and becomes a low-res 'Address Book' picture that appears in the top-right corner when someone calls.
    I know the topic of contact pic has been hashed out lots already, but I haven't found this answer yet. How do I get my iPhone contact pictures to stay on my iPhone contacts in full resolution after syncing to MacBook Address Book?
    What happens: take a new picture with the iPhone by going to the contact / Edit / add photo / Take Photo, or add a picture by going to the contact / Edit / add photo / Choose Existing Photo -- the contact picture will be a full-screen full-res contact photo; the person will call and their picture will be the full background on the phone call display. Then I sync a couple times with my MacBook with 'Sync Address Book contacts' checked: the full-res photo will be lost, replaced by a low-res version that only appears in the top-right when the person calls.
    It's like the first sync Address Book receives the photo from the iPhone, the 2nd sync the iPhoto replaces the high-res photo with the low-res one that Address Book is using. When it happens with a new photo it appears there is no way to recover the higher-res photo (very sad sometimes). It doesn't happen 100% of the time - perhaps there's a variable I'm not seeing.
    Others have said that you only get the low-res, top-right picture if you assign the photo to the contact in Address Book on the computer, but I'm also getting it when I simply sync to the computer. I've never added contact pictures using Address Book.
    My wish: Address Book would accept the higher-res version photo. Fallback wish: Address Book uses a low-res version, iPhone keeps it's higher-res version. At the very least, let me choose which device takes precedent in sync!
    Is there a workaround? A way to recover the higher-res version? A way to make the higher-res picture stick? Mostly I want to know: is anyone else having this problem?
    Thanks for any info in advance.

    It seems that with each upgrade the feature that allow you to assign a photo to a contact keeps changing the way it works. When I select a photo and used the cropping tools, the results are not even close to what you selected on screen with the crop and zoom functions.
    How do we get this bug fixed!
    Thanks!

  • Contact Picture when phone is ringing.

    I have a question I need assistance with.  My iPhone when receiving calls are only showing my contact pictures in thumbprint and not in full size.  How can I can that?

    This is a change that came about with iOS 7.1. There is no change that can be done. You may provide feedback to Apple at www.apple.com/feedback and click on the appropriate link.

Maybe you are looking for

  • Configurational settings for data source in BI server

    Hi Sdns, Where can we make  configurational settings for data source in BI server. Advance thanks to replies. karun

  • HANDLING YEAR

    Hi to all plz tell me in the database i have order creation date in yyyy-mm-dd format. At selection screen i am giving fiscal year bkpf-gjahr. I want report according to fiscal year. How to compare year and date. plz help me out. thanks...

  • Bp role grouping

    Hi All As in r/3, when we create a customer with account group 0001(sold to party), Ship to, bill to and payer are created automatically with the same number. In CRM, we need to select BP role as sold to and create, then go to the change mode and sel

  • Missing pdf file

    Hi I was working on a PDF file for a long time, just highlighting some text and using sticky notes. I have used to save the file frequently at the same location. Suddenly I found out that the file is missing from that location. Tried to search it on

  • Subqueries and Case

    I have two codes - A & B My question is can I use code B i.e Case statement as a subquery of code A to get the necessary output =============================CODE A===================================================== select a.search_code,a.name,a.tot