Xperia Z3 doesn't support touch to focus while recording?

Why doesnt the Xperia Z3 support touch to focus in superior auto mode?
Thats a big let down for Sony... :/

@chickideee
Sorry to hear that you have this issue as well.
Would it be possible for you to take a report from the phone when this happens and send it to me?
First you need to enable the developer options menu. To do this, go to Settings -> About phone and tap the build number 7 times.
When this happens the next time, go to Settings -> Developer options -> Take bug report -> Report. When a report has been created (it may take a little while) you will get a notification. Tap this to share it to for example Google drive and then send me a PM here on the forum.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Nokia lumia 520 and 525 support touch to focus?

    Do the above phones support touch to focus?

    Hi. asha305user.
    Thank you for posting and welcome to the Nokia Support Discussions.
    The Nokia Lumia 520 and the Nokia Lumia 525 supports touch to focus. For more information, you may check this link: http://www.nokia.com/global/products/compare/?acti​on=productcompareaction&products=2204302-3173858#p​.... 
    Let us know if you need further help. 

  • Manual focus while recording movies with sony HX100V?

    does anybody know whether one can manually focus while recording movies (also in 60p) with the hx100V?
    wondering - that would really make a difference.
    thank you very much!
    dom

     Hi domi,
    After doing a bit of research on this it does seem to be possible to use the manual focus feature of this camera while shooting video. When you turn the mode dial to Video the camera defaults to Intelligent Auto mode, which will not allow you to manually focus your videos. While the camera is set to shoot videos you need to go into your menu settings and change the camera's mode from Intelligent Auto to Scene mode.
    I hope this helps!
    Allan|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • ADE doesn't support touch on windows 8???

    How am I supposed to read a book on my tablet (win 8) if the software doesn't use touch input for, say, turning the pages?!

    I hope they'll release a working, touch-capable version of ADE for win 8, and soon! 
    I wouldn't hold your breath, the bug-ridden ADE2.0 has been out for over a year with no attempt to fix even the most glaring issues.
    The only alternative I know for reading Adobe DRM books on Windows is Sony Reader. https://ebookstore.sony.com/download/
    It is designed for use with Sony eReader devices, but works standalone without.
    I don't think there is a touch version yet, but maybe (no promises) you will find it a little less bad then ADE?
    It does seem to have larger forward/back arrows to touch.

  • Htc touch diamond doesn't support sensor API!!!!!!!!!!!!!!!!

    hi everyone,
    i decided to purchase htc touch diamond to start building some wonderful midlets!
    But something is wrong with me and my code and not with my mobile(I want to believe this!)
    I decided to get the properties from my mobile using these 2 lines :
    String m3g = System.getProperty("microedition.m3g.version");
    String sensor=System.getProperty("microedition.sensor.version");
    these two lines return two null Strings!!!as i read,if these two lines return null Strings means that the device doesn't support them!!!
    the whole code is:
    * To change this template, choose Tools | Templates
    * and open the template in the editor.
    import javax.microedition.midlet.*;
    import javax.microedition.lcdui.*;
    * @author LiTTle
    public class Midlet extends MIDlet {
    public void startApp()
    Display dis=Display.getDisplay(this);
    String m3g = System.getProperty("microedition.m3g.version");
    String sensor=System.getProperty("microedition.sensor.version");
    Form form=new Form("Supported");
    form.append("M3G: "+m3g);
    form.append("SENSOR: "+sensor);
    dis.setCurrent(form);
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
    please tell me that my code is wrong!I don't want to believe that i spent so much money for nothing!!!
    P.S. some weeks before i found out that this device doesn't support bluetooth api!!!
    thank you in advance all of you...

    Don't worry. I think I have worked out why. I called multiple
    loadMovie() to load multiple photos. That seemed to have cause the
    app to hang. I have now changed to method to loadClip() and load
    the photo one by one using OnLoadInit event. That solved the
    problem.

  • Why iPod Touch 4G Doesn't Support iOS7

    Why iPod Touch 4G Doesn't Support iOS7

    As Apple said in June, iOS 7 is not compatible with the 4G iPod.
    All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

  • I have an iBook G4 and iTunes is no longer updating. The last update is 9.2.1 but it doesn't support my iPhone or iPad. Is there anything I can do to update iTunes or is my only recourse to update my laptop?

    I have an iBook G4 and iTunes is no longer updating. The last update is 9.2.1 but it doesn't support my iPhone or iPad. Is there anything I can do to update iTunes or is my only recourse to update my laptop?

    As Niel has suggested Mac OS X 10.5 Lepaord.
    But first of all make sure that your iBook is above 800Mhz and you have at least 512 Meg of memory. (1 GB recommended)
    Please note, that if you do install Mac OS X 10.5 on your iBook, it will not allow you to install the latest version of iTunes version 11. The most recent version of iTunes that can be installed would be 10.5, which will be compatible with your iPod touch 4th gen, provided it's not been updated to iOS 6.
    Sadly you can't install any version of Mac OS X above 10.5 Leopard, as it they requires an Intel processor, which your iBook G4 does not have.
    Hope this helps.

  • HT4009 IX have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

    I have an iPad version 4.3 and I had instagram install, like I was having problem I uninstalled it, but now I can't install it again, because my iPad doesn't support the new version, is there a way that I can download instagram for this iPad?

    Update your iOS.
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • NOKIA Lumia 710: Touch screen focus no longer work...

    Hello.
    I've only had my Lumia 710 for two weeks.  Up until 4 days ago, the touch screen focus attribute was working perfectly.  I was taking pictures and it simply stopped working.
    I've since tried resetting the camera options back to defaults with no luck.  I recently updated the phones software pn 10.18.2012 with no change either.  I also took out the battery and sim card out of frustration and obviously had no luck.
    Aside from having to do a hard reset, does anyone have any suggestions regarding how to possibly fix this?
    Maybe I'm missing an obvious and simple setting?  Maybe not. Lol
    Thank you. :-)

    Hi Oddmoore,
    Welcome to Nokia Support Discussions!
    Normally Nokia Lumia 710 should focus on the part you tap with your finger (and show a reticle while doing so) and snap a picture. There is no setting to switch this off, so it should be working by default.  We would advise you to reset your phone at Settings > About > Reset your phone. Just remember to backup your media files before doing so, because it will wipe your phone clean. If the issue persists, visit your local Nokia Care point and let them have a look. 
    Hope this helps!
    Puigchild
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • ADE doesn't support Windows 8

    Hi,
    After waiting for a week for an answer why I couldn't authentiate my Adode Digital Edition a got an answer from the chat. ADE doesn't support Windows 8!!!
    http://www.adobe.com/in/products/digital-editions/tech-specs.html
    If you using Windows 7 64-bit you need to get it to run in 32-bit mode!!
    What the hell is this!
    No workarounds, wait until a upgrade.

    I hope they'll release a working, touch-capable version of ADE for win 8, and soon! 
    I wouldn't hold your breath, the bug-ridden ADE2.0 has been out for over a year with no attempt to fix even the most glaring issues.
    The only alternative I know for reading Adobe DRM books on Windows is Sony Reader. https://ebookstore.sony.com/download/
    It is designed for use with Sony eReader devices, but works standalone without.
    I don't think there is a touch version yet, but maybe (no promises) you will find it a little less bad then ADE?
    It does seem to have larger forward/back arrows to touch.

  • SMTP Doesn't Support Authentication

    I have a second generation iPOD Touch (32 GB) which can receive e-mail over Wi-Fi but can't send e-mail over Wi-Fi. I get the following error messages:"smtp doesn't support authentication; or "smtp account verification failed"; or "the connection to the outgoing server [insert server name here] failed." I have deleted and re-entered the information for my mail account numerous times but that has not helped. I have even "reset" the iPOD. What am I doing wrong in setting up my mail account which prohibits it from sending e-mail on Wi-Fi? I have the latest version of iTUNES so that is not the issue. Is this a port problem? My outgoing server port is set to 25 and my incoming server port is set to 110. My SSL setting is set to off. Also I am using password authentication. Any suggested "fixes" will be greatly appreciated.

    I asked this same exact question a short time ago, and Jason L responded with with very good explanation. I have since used my used the google smtp server to send email VIA my touch.
    see here:
    http://discussions.apple.com/message.jspa?messageID=10897734#10897734

  • Lumia 900 doesn't support Name Display?

    I was talking with the Rogers representative here in Canada, and he says the Lumia 900 doesn't support Name Display (as opposed to Caller ID).  Is this true?  Could it be possibly added via firmware changes?

    ProfJulie wrote:Have you seen this thread?  Seems like Rogers may need to make a change in their system on their end:
    Yup.. but this is slightly different.
    Here, Caller ID is working fine (I can see the phone# of the caller, and if they are in my Contacts list, then the name/image is displayed) but if it is someone who is not in my Contacts list, then with Name Display enabled, their name (not number) should display on the phone (if they allow it, which most businesses do).
    On my account, Name Display is enabled and works fine on a Samsung Focus S. On my Lumia 900 however, I never see names -- only the caller's phone number.  According to Rogers, Name Display doesn't work on a Lumia 900.
    I can attest the Rogers has the account set up properly, since it works on the Samsung Focus S.

  • Why PC Companion doesn't support SMS backup?

    Hi!
    Why PC Companion doesn't support SMS backup?
    So clear to need it as a base features
    May be it has a recommended third party software?

    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Error in allInOne.js: Object doesn't support this property or method

    We are having an issue deploy our website (Developed in .Net) on a specific server. When we try to visualize a report on any browser we get this error:
    Webpage error details
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30618; OfficeLiveConnector.1.4; OfficeLivePatch.0.0)
    Timestamp: Wed, 7 Apr 2010 17:52:31 UTC
    Message: Object doesn't support this property or method
    Line: 10
    Char: 281690
    Code: 0
    URI: http://{IP ADDRESS}/WebUserInterface/aspnet_client/system_web/2_0_50727/crystalreportviewers12/allInOne.js
    We have install the Crystal reports 2008 runtime and the Crystal report 2008 sp2.5 runtime. Both of them give me the same results.
    It's killing me because i have installed the same solution on many other server without any issue.
    Ben
    P.s. The Web server is  a Window Server 2003 R2 standard edition

    Perhaps using [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] will at least tell us what dlls are loading. Look at the CR dlls. There should not be any v11 files loaded by your app.
    You may also start considering obtaining phone support for this one. I have a feeling this will take more than just forums to solve...
    Phone support can be obtained here:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • Iwlist scanning gives: Interface doesn't support sc [solved]

    When I'm trying to scan for all available networks I get:
    # iwlist eth1 scanning
    eth1 Interface doesn't support scanning : Operation not supported
    My wireless card works fine if I set every parameter manually. I'm currently using the orinoco drivers that came along with ArchLinux.
    It seems like that the version of the orinoco drivers installed doesn't support the scan stuff. But building the new orinoco drivers failed with
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_suspend':
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:330: error: too many a rguments to function `pci_save_state'
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_resume':
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:347: error: too many a rguments to function `pci_restore_state'
    make[2]: *** [/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.o] Error 1
    make[1]: *** [_module_/usr/local/download/orinoco/orinoco-0.15rc2] Error 2
    make[1]: Leaving directory `/usr/src/linux-2.6.11.3-ARCH'
    make: *** [modules] Error 2
    So I did try the wlan-ng26 driver downloaded and installed with pacman.
    I remove the orinoco modules with
    [root@ArchThinkpad orjanp]# modprobe -r orinoco_pci
    But when I try to insert the prism2_pci module, it doesn't exist. Why?
    [root@ArchThinkpad orjanp]# modprobe prism2_pci
    FATAL: Module prism2_pci not found.
    Any heads up on what to do?
    This is iwconfig before removing the orinoco modules.
    [root@ArchThinkpad orjanp]# iwconfig
    lo no wireless extensions.
    sit0 no wireless extensions.
    eth0 no wireless extensions.
    eth1 IEEE 802.11-DS ESSID:"" Nickname:"Prism I"
    Mode:Managed Access Point: 00:00:00:00:00:00 Bit Rate:11 Mb/s
    Tx-Power=15 dBm Sensitivity:1/3
    Retry min limit:8 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:off
    Link Quality=0/92 Signal level=-68 dBm Noise level=-122 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    This is lspci
    [root@ArchThinkpad orjanp]# lspci
    00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
    00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
    00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
    00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
    00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
    00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
    00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
    00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
    00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02)
    00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02)
    00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02)
    01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
    02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
    02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
    02:02.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
    02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
    This is lsmod before removing orinoco.
    [root@ArchThinkpad orjanp]# lsmod
    Module Size Used by
    radeon 78336 1
    ohci_hcd 23048 0
    ehci_hcd 36488 0
    irtty_sir 7552 0
    sir_dev 18636 1 irtty_sir
    irda 144184 1 sir_dev
    crc_ccitt 2432 1 irda
    parport_pc 29252 0
    parport 38600 1 parport_pc
    rtc 13260 0
    pcspkr 4044 0
    eepro100 32528 0
    orinoco_pci 7552 0
    orinoco 44172 1 orinoco_pci
    hermes 9472 2 orinoco_pci,orinoco
    yenta_socket 23560 0
    rsrc_nonstatic 11648 1 yenta_socket
    pcmcia_core 51488 2 yenta_socket,rsrc_nonstatic
    snd_intel8x0m 19396 0
    snd_intel8x0 34624 0
    snd_ac97_codec 79224 2 snd_intel8x0m,snd_intel8x0
    snd_pcm_oss 56224 0
    snd_mixer_oss 21120 1 snd_pcm_oss
    snd_pcm 98564 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_timer 27268 1 snd_pcm
    snd 59492 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
    soundcore 10848 1 snd
    snd_page_alloc 10244 3 snd_intel8x0m,snd_intel8x0,snd_pcm
    i2c_i801 8972 0
    i2c_core 23296 1 i2c_i801
    usbhid 47744 0
    uhci_hcd 33424 0
    usbcore 125560 5 ohci_hcd,ehci_hcd,usbhid,uhci_hcd
    shpchp 100996 0
    pci_hotplug 34760 1 shpchp
    tsdev 8256 0
    joydev 10560 0
    evdev 9984 0
    cpufreq_powersave 2176 0
    cpufreq_userspace 5680 0
    p4_clockmod 6164 0
    speedstep_lib 4868 1 p4_clockmod
    freq_table 5008 1 p4_clockmod
    e100 37760 0
    mii 5760 2 eepro100,e100
    nls_cp437 6144 1
    vfat 14976 1
    fat 41884 1 vfat

    orjanp wrote:
    Thanks.
    I installed the 0.15RC1 version of the Orinoco drivers found here.
    I rebooted but I still had the 0.13 version. I did a make and make install as the readme file said.
    What do I have to do to update the driver?
    do you use a PKGBUILD?
    update the driver: if it was copied to the right place and the kernel knows about it (depmod -a) it should work
    for a start, check under
    ls -la /lib/modules/`uname -r`/kernel/drivers/net/wireless/
    that your module is installed under the correct location (the orinoco files should be newer than the other ones)
    if this is so, make sure you are depmod -a (as root) ... and if even this is ok, then either you are running the new modules or something strange happened

Maybe you are looking for