XPOWER USB 3.0 HOST controller not found

i tried to reinstall the usb 3.0 driver/app from msi and when i run it from the start menu i have this error below
i also tried asus driver and does the same thing.. i need help.. and i am thinking that the conflict on my device manager is the controller
Machine  Spec :
Bigbang Xpower (1.40) bios
intel xeon x5650
Kingston hyper X 2250mhz
Msi GTX 295 single PCB
please help..

here is my story..
my old rig was xpower + gtx580 + same memory + xeon 5650 and works like a charm. i rma'ed my mobo last month and have the chance to assemble it yesterday, i sold my gtx580 and downgraded my card to gx295 and that is the only thing i changed.
right now, i do not know if the new rma'ed mobo has a problem or this gtx295 causing it. currently, here are the points to consider
-GTX 295 with a single memory it works
-GTX 295 with 2 or more memory i encounter a vga conflict
-GTS 460 works fine with a single dual and triple channel memory

Similar Messages

  • "Host Controller Not Found"

    I recently factory reinstalled my Lenovo W510. The recovery discs come with Vista 32 and I upgraded the system to 
    Win7 64. The device manager did a good job at finding the missing drivers I needed except for two things...
    The most concerning problem is that the pc will not  recognize any usb device that is plugged into it. The logical 
    thing to do is download the required usb drivers to make them work. I have downloaded the usb 3.0 device
    driver as well as the firmware for this. Whenever I try to run the "USB 3.0 Host Controller Utility" , the system tells
    me that there is no host controller found. When I try to install the firmware it says "Not Found the Host Controller"
    I don't know what else I need to do? The device manager update utility does not recognize any missing drivers.
    Any help?
    THANKs!!!!

    hey atweiss90,
    if you uninstalled the current USB 3.0 drivers. Does your OS install generic drivers for it ?
    If it does, could you see if your USB works with the generic drivers.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • How to restore, reinstall to WIN 7 vers. USB 3.0 Host Controller after driver upgrade to Win 8

    After an undate for the Intell USB 3.0 Host Controller (extensible) as a WIN 8 driver update my DynaDock does not work properly for any devices using the USB ports on the dock and connected to any USB port on the HP Envy 4-1043 laptop. Reading everywhere I can find anything it seems that there is a problem with the Microsoft or Intel driver for the USB 3.0 Host such that the USBs work find when things are plugged directly into them. BUT, when the dynadock is pluuged in and any of its 6 USB ports are used the devices either cannot be found or behavior extremely sluggishly.
    This Dynadock has worked well with my last 4 HP computers and worked fine under WIn 7 and 8 on this Envy until the last update of the driver.
    I do not know how to re-install the old driver (Hps' WIN7 version sp56724. Can someone please give me the steps or refer me to a source to do this properly?
    There is no roll back option in the device manager for this driver. It is grayed out.
    I have take pride in not experimenting with 'brihg tiddeas' of how to fix things on this machine. Not that 99% of my gut plus resources from help pages and Miscrosoft did not work before. I do not have a backup computer anymore and I cannot afford the lost of time and productive in making a mess and then spending days trying to undo and fix something that I know others have done well.

    Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station. 

  • Intel(R) USB 3.0 Host Controller Switch Driver

    Hello All,
    As part of our software install we are installing the Intel(R) USB 3.0 Host Controller Switch Driver (iusb3hcs.sys) on machines that have Win 7 Embedded (x64). When this driver is installed I have noticed that the USB controller behaves differently:
    When shutting down (or rebooting), the controller does not completely lose power. Therefore, if I reboot or shutdown from Win7, and immediately boot to a WinPe usb stick, the driver in winpe seems to have an issue loading and the stick is not recognized.
    To fix the problem I can simply unplug the machine (allowing for the controller to lose power) and then booting into WinPe the stick is recognized.
    Wondering if anyone knows what OS setting or change I can make in the inf to tell the driver to make the USB Controller power down when doing a shutdown. Any help appreciated

    Hi,
    I'd probably start by asking here:
    https://social.technet.microsoft.com/Forums/en-us/home?category=windowsembedded&filter=alltypes&sort=lastpostdesc
    Don't retire TechNet! -
    (Don't give up yet - 13,225+ strong and growing)

  • WebUtil:  oracle.forms.webutil.host.Host bean not found

    Hi. This is my first attempt using WebUtil. The following code is in my When-New-Form-Instance trigger:
    client_host('N:\TTMS\ITS\vbasic\compiled\MenuUpdate.exe');
    This is the error I receive:
    oracle.forms.webutil.host.Host bean not found
    I've included my formsweb.cfg below for your reference. Note that the application is using the [ttmsmenu] configuration.
    Thanks in advance for your help with this problem.
    ***FORMSWEB.CFG***
    # $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
    # formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
    # This section defines the Default settings. Any of them may be overridden in the
    # following Named Configuration sections. If they are not overridden, then the
    # values here will be used.
    # The default settings comprise two types of parameters: System parameters,
    # which cannot be overridden in the URL, and User Parameters, which can.
    # Parameters which are not marked as System parameters are User parameters.
    # SYSTEM PARAMETERS
    # These have fixed names and give information required by the Forms
    # Servlet in order to function. They cannot be specified in the URL query
    # string. But they can be overridden in a named configuration (see below).
    # Some parameters specify file names: if the full path is not given,
    # they are assumed to be in the same directory as this file. If a path
    # is given, then it should be a physical path, not a URL.
    # USER PARAMETERS
    # These match variables (e.g. %form%) in the baseHTML file. Their values
    # may be overridden by specifying them in the URL query string
    # (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
    # or by overriding them in a specific, named configuration (see below)
    [default]
    #WebUtilArchive=frmwebutil.jar,jacob.jar
    #WebUtilLogging=off
    #WebUtilLoggingDetail=normal
    #WebUtilErrorMode=Alert
    #WebUtilDispatchMonitorInterval=5
    #WebUtilTrustInternal=true
    #WebUtilMaxTransferSize=16384
    # System parameter: default base HTML file
    baseHTML=base.htm
    # baseHTML=webutilbase.htm
    # System parameter: base HTML file for use with JInitiator client
    baseHTMLjinitiator=basejini.htm
    # baseHTMLjinitiator=webutiljini.htm
    # System parameter: base HTML file for use with Sun's Java Plug-In
    baseHTMLjpi=basejpi.htm
    # baseHTMLjpi=webutiljpi.htm
    # System parameter: delimiter for parameters in the base HTML files
    HTMLdelimiter=%
    # System parameter: working directory for Forms runtime processes
    # WorkingDirectory defaults to <oracle_home>/forms if unset.
    workingDirectory=
    # System parameter: file setting environment variables for the Forms runtime processes
    envFile=default.env
    # Forms runtime argument: whether to escape certain special characters
    # in values extracted from the URL for other runtime arguments
    escapeparams=true
    # Forms runtime argument: which form module to run
    form=test.fmx
    # Forms runtime argument: database connection details
    userid=
    # Forms runtime argument: whether to run in debug mode
    debug=no
    # Forms runtime argument: host for debugging
    host=
    # Forms runtime argument: port for debugging
    port=
    # Other Forms runtime arguments: grouped together as one parameter.
    # These settings support running and debugging a form from the Builder:
    otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
    # Sub argument for otherparams
    buffer=no
    # Sub argument for otherparams
    debug_messages=no
    # Sub argument for otherparams
    array=no
    # Sub argument for otherparams
    obr=no
    # Sub argument for otherparams
    query_only=no
    # Sub argument for otherparams
    quiet=yes
    # Sub argument for otherparams
    render=no
    # Sub argument for otherparams
    record=
    # Sub argument for otherparams
    tracegroup=
    # Sub argument for otherparams
    log=
    # Sub argument for otherparams
    term=
    # HTML page title
    pageTitle=Oracle Application Server Forms Services
    # HTML attributes for the BODY tag
    HTMLbodyAttrs=
    # HTML to add before the form
    # HTMLbeforeForm=
    HTMLbeforeForm=<SCRIPT LANGUAGE="JavaScript">window.opener = top;</SCRIPT>
    # HTML to add after the form
    HTMLafterForm=
    # Forms applet parameter: URL path to Forms ListenerServlet
    serverURL=/forms/lservlet
    # Forms applet parameter
    codebase=/forms/java
    # Forms applet parameter
    #imageBase=DocumentBase
    imageBase=codeBase
    # Forms applet parameter default 750
    # width=1000
    # width=100%
    width=500
    # Forms applet parameter default 600
    # height=700
    # height=100%
    height=500
    # Forms applet parameter default false
    separateFrame=true
    # Forms applet parameter
    # splashScreen=
    splashScreen=no
    #splashScreen=ttmslogo_new.gif
    # Forms applet parameter
    background=ttmslogo_new.gif
    # Forms applet parameter
    lookAndFeel=Oracle
    # Forms applet parameter
    colorScheme=teal
    # Forms applet parameter
    logo=ttms_banner.gif
    # Forms applet parameter
    restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
    # Forms applet parameter
    formsMessageListener=
    # Forms applet parameter
    recordFileName=
    # Forms applet parameter
    serverApp=default
    # Forms applet archive setting for JInitiator
    archive_jini=frmall_jinit.jar
    # Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
    archive=frmall.jar
    # Number of times client should retry if a network failure occurs. You should
    # only change this after reading the documentation.
    networkRetries=0
    # Page displayed to Netscape users to allow them to download Oracle JInitiator.
    # Oracle JInitiator is used with Windows clients.
    # If you create your own page, you should set this parameter to point to it.
    jinit_download_page=/forms/jinitiator/us/jinit_download.htm
    # Parameter related to the version of JInitiator
    jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
    # Parameter related to the version of JInitiator
    jinit_exename=jinit.exe#Version=1,3,1,22
    # Parameter related to the version of JInitiator
    jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
    # Page displayed to users to allow them to download Sun's Java Plugin.
    # Sun's Java Plugin is typically used for non-Windows clients.
    # (NOTE: you should check this page and possibly change the settings)
    jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
    # Parameter related to the version of the Java Plugin
    jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
    # EM config parameter
    # Set this to "1" to enable Enterprise Manager to track Forms processes
    em_mode=0
    # Single Sign-On OID configuration parameter
    oid_formsid=%OID_FORMSID%
    # Single Sign-On OID configuration parameter
    oracle_home=C:\DevSuiteHome_1
    # Single Sign-On OID configuration parameter
    formsid_group_dn=%GROUP_DN%
    # Single Sign-On OID configuration parameter: indicates whether we allow
    # dynamic resource creation if the resource is not yet created in the OID.
    ssoDynamicResourceCreate=true
    # Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
    ssoErrorUrl=
    # Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
    ssoCancelUrl=
    # Single Sign-On parameter: indicates whether the url is protected in which
    # case mod_osso will be given control for authentication or continue in
    # the FormsServlet if not. It is false by default. Set it to true in an
    # application-specific section to enable Single Sign-On for that application.
    ssoMode=false
    # The parameter allow_debug determines whether debugging is permitted.
    # Administrators should set allow_debug to "true" if servlet
    # debugging is required, or to provide access to the Forms Trace Xlate utility.
    # Otherwise these activities will not be allowed (for security reasons).
    allow_debug=false
    # Parameter which determines whether new Forms sessions are allowed.
    # This is also read by the Forms EM Overview page to show the
    # current Forms status.
    allowNewConnections=true
    # EndUserMonitoring
    # EndUserMonitoringEnabled parameter
    # Indicates whether EUM/Chronos integration is enabled
    EndUserMonitoringEnabled=
    # EndUserMonitoringURL
    # indicates where to record EUM/Chronos data
    EndUserMonitoringURL=
    # Example Named Configuration Section
    # Example 1: configuration to run forms in a separate browser window with
    # "generic" look and feel (include "config=sepwin" in the URL)
    # You may define your own specific, named configurations (sets of parameters)
    # by adding special sections as illustrated in the following examples.
    # Note that you need only specify the parameters you want to change. The
    # default values (defined above) will be used for all other parameters.
    # Use of a specific configuration can be requested by including the text
    # "config=<your_config_name>" in the query string of the URL used to run
    # a form. For example, to use the sepwin configuration, your could issue
    # a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
    [sepwin]
    separateFrame=True
    lookandfeel=Generic
    # Example Named Configuration Section
    # Example 2: configuration forcing use of the Java Plugin in all cases (even if
    # the client browser is on Windows)
    [jpi]
    baseHTMLJInitiator=basejpi.htm
    # Example Named Configuration Section
    # Example 3: configuration running the Forms ListenerServlet in debug mode
    # (debug messages will be written to the servlet engine's log file).
    [debug]
    serverURL=/forms/lservlet/debug
    # Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
    # DS but not AS and is also available for download from OTN.
    [webutil]
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    archive_jini=frmall_jinit.jar
    archive=frmall.jar
    lookAndFeel=oracle
    [ttmsmenu]
    WebUtilArchive=frmwebutil.jar,jacob.jar
    WebUtilLogging=off
    WebUtilLoggingDetail=normal
    WebUtilErrorMode=Alert
    WebUtilDispatchMonitorInterval=5
    WebUtilTrustInternal=true
    WebUtilMaxTransferSize=16384
    baseHTMLjinitiator=webutiljini.htm
    baseHTMLjpi=webutiljpi.htm
    baseHTML=webutilbase.htm
    archive_jini=frmall_jinit.jar
    archive=frmall.jar
    lookAndFeel=oracle
    width=500
    height=500
    background=no
    form=ttmsmenu.fmx

    Dumb dumb dumb.
    I was running this form out of Form Builder 10g. At some point I changed the Application Server URL (Edit => Preferences => Runtime menus) from:
    http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?config=ttmsmenu
    to:
    http://ssbuechl2.div16.ibm.com:8889/forms/frmservlet?
    So my customized configuration with all the WebUtil references was not being referenced and I was getting the error.
    Dumb dumb dumb.

  • Webutil.host.HostBean not found WEBUTIL_HOST.execute will not work

    Hi everyone:
    I've got a form. I've attached webtill.pll and subclassed webutil.olb.
    In the WHEN-NEW-FORM-INSTANCE trigger it does:
    client_host('cmd /c cd > arch.txt');
    When I execute my form I got the errror:
    webutil.host.HostBean not found
    WEBUTIL_HOST.execute will not work
    Could anyone give me some help on it?
    Thanks!
    Carolina

    Hi!
    this is what I got in the Java console
    JInitiator: Versión 1.3.1.22
    Usar versión JRE 1.3.1.22-internal Java HotSpot(TM) Client VM
    Directorio local del usuario = C:\Documents and Settings\Administrador
    Configuración del delegado: sin delegado
    JAR cache enabled
    Location: C:\Documents and Settings\Administrador\Oracle Jar Cache
    Maximum size: 50 MB
    Compression level: 0
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    q: hide console
    s: dump system properties
    t: dump thread list
    x: clear classloader cache
    0-5: set trace level to <n>
    Loading http://rx26201:7778/forms/java/frmall_jinit.jar from JAR cache
    Loading http://rx26201:7778/forms/java/frmwebutil.jar from JAR cache
    Loading http://rx26201:7778/forms/java/jacob.jar from JAR cache
    Loading http://rx26201:7778/forms/java/dgrImages.jar from JAR cache
    proxyHost=null
    proxyPort=0
    connectMode=HTTP, native.
    La versión del applet Forms es: 10.1.2.0
    thanks!

  • Host Configuration not found error in database control

    I have freshly installed Oracle DB 11g and a starter database.
    Then i went to emctl (database control), at the home tab, I noticed the status is up (Green up arrow icon) but the "Instance Name", "Version", "Up Until" entries have the value "unknown"
    And then when i Click on the "view all properties link", I noticed that the ORACLE_HOME entry has a warning icon after the entry. Then when you click on the ORACLE_HOME entry link, I get a page saying
    Host Configuration not found. Check to see if the target exists.Whats happening? Did I miss something in my installation?
    regards,
    Anton

    What is the OS?. Have you seen the Metalink note: 353681.1
    Subject: Problem: Click on ORACLE_HOME gets "Host Configuration not found. Check to see if the target exists"
    Doc ID: 353681.1 Type: PROBLEM
    Modified Date : 30-JUL-2007 Status: PUBLISHED

  • USB 3.0 host controller and USB Root Hub xHCI not showing up on Windows 8.1 laptop

    Greetings and thank you for taking the time to read the following message and 'maybe' attempt to help me with my current plight...
    I have an HP envy m6 laptop running Windows 8.1 and Windows 7. The problem i am facing at current is that i have only 1 out of 4 usb ports working on my Windows 8.1 partition however on my Server 2012 partition, all four ports are working fine. After asking
    around i have come to the conclusion that i'm having a driver issue. I compared what was present on the Windows 7 USB controllers (in Device Manager) to what was present on the Windows 8.1 controllers and i found that my Intel(R) USB 3.0 extensible host controller
    - 0100 (Microsoft) and my USB Root Hub (xHCI) was missing on my Windows 8.1 partition. 
    Now for some background....the problem first occurred when i was trying to solve an external hard drive issue in which none of my external hard drives where showing up when i plugged them into my usb ports, i came across an online solution telling me to
    uninstall all my USB drivers in device manager, restart the laptop and let the computer re install the drivers automatically, the result was that i only had 1 out of 4 ports working. Could someone please point me in the right direction in order to fix this
    problem? 

    Windows 8 has native USB 3.0 drivers which explains why you are not seeing an option to roll back. I do not believe you can make the Windows 7 driver work. Have you tried uninstalling in the device manager all usb items and then rebooting to let the drivers reload? Do that with the computer off the dock and then plug it into the dock. As a general rule you should not do driver updates to a laptop through a docking station. 

  • USB Host Controller not recognized by Windows 7.

    Just installed Windows 7 in a1130n desktop.  The USB Host Controller and the Std USB Host Controller are not recognized by the operating system.  The USB ports and the media memory ports on the front panel will not work.

    My HP Z400 is suffering from the same problem. Did you discover a solution?

  • Toshiba A60 USB 2.0 Host Controller, Can Anyone Help?

    Hi everyone,
    I recentry purchased a new Toshiba Satellite A60 notebook. Of course, instantly I formatted it, and installed XP Pro, because I didn't need half the programs that the laptop comes installed with.
    Problem is now that all they gave me was a recovery disk (DVD). I have found the ATI and RealTek Drivers with no problems off the Toshiba Download Centre, but I cannot find any USB 2.0 drivers (Host Controller). The USB goes really really slow now. I tried just using a Generic Host Controller, but it goes 10 times slower then if I dont have any controller in there lol.
    Im thinking maybe I can get Norton Ghost, and try to view the files that Toshiba used in their Recovery Disk.
    I am still stunned why they haven't given me a Drivers CD, first time this has happened to me.
    Any Suggestions? Or maybe anyone know where I can get the Host Controller from, that suits the A60?
    Thanks in Advance!

    HI Ozzie,
    Did you not receive the Toshiba Tools & Utilities CD in addition to the Recovery Disks ?
    If not then perhaps you could re-install your system from the recovery disks (thereby getting all the correct drivers) and then delete the unwanted software afterwards. This would ensure that you get all the ccompatible drivers for your system
    regards,

  • Virtual Hosts 404 not found

    Hi all ,
    I have to set up a virtual host on CE7.2
    I configure it on "SAP NetweaverAdministrator"  --> "Java HTTP Provider Configuration"
    virtual hosts name : share_folder
    root directory : /share <-- all user and group can access (local directory)
    aliases : test_share
    after complete configuration.
    I access this virtual host by
    http://<server>:<port>/share_folder
    or
    http://<server>:<port>/test_share
    all response "404 not found"
    Can you give me suggestion.

    did you define the alias name dispImageServlet in your web.xml
    double click on web deployment descriptors in WSAD , and you will be able to add it very easily

  • I have this message on Terminal. nano/private/etc/hosts: command not found. How can I fix it to get right?

    /etc/hosts ; exit;
    /etc/hosts: line 7: 127.0.0.1: command not found
    /etc/hosts: line 8: 255.255.255.255: command not found
    /etc/hosts: line 9: ::1: command not found
    logout

    What are you attempting to do?

  • Standard Enhanced PCI to USB host Controller not working

    Plz help me its suck i can't find any driver for this USB port its suck all my usb ports are not working they not accepting any usb or some thing or intel managment interface also not working plz help me . Thankyou
    Us Device PCI
    Device PCI\VEN_8086&DEV_1E26&SUBSYS_17F8103C&REV_04\3&11583659&0&E8 was configured.
    Driver Name: usbport.inf
    Class GUID: {36FC9E60-C465-11CF-8056-444553540000}
    Driver Date: 06/21/2006
    Driver Version: 6.2.9200.16384
    Driver Provider: Microsoft
    Driver Section: EHCI.Dev.NT
    Driver Rank: 0xFF2005
    Matching Device ID: PCI\CC_0C0320
    Outranked Drivers:
    Device Updated: false
    Intel Mangagment interface
    Device PCI
    Device PCI\VEN_8086&DEV_1E3A&SUBSYS_17F8103C&REV_04\3&11583659&0&B0 was configured.
    Driver Name: null
    Class GUID: {00000000-0000-0000-0000-000000000000}
    Driver Date:
    Driver Version:
    Driver Provider:
    Driver Section:
    Driver Rank: 0x0
    Matching Device ID:
    Outranked Drivers:
    Device Updated: false

    What is the installed operating system?
    In which region of the world are you located?
    Try the following Intel Management Engine software
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113870-1&cc=us&dlc=en&lc=en...
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Everytime i try to e-mail an article to myself, or when i go on a site such as craigslist and try to answer an ad for a job i get "host-smtp not found" why is this?

    whenever i attempt to e-mail an article i found online, or when i go to a site such as craigslist and look for employment, whenever i attempt to answer any ad for employment i get a pop up window that states : "the host smtp could not be found. server name correctly. subject start up nation 10 step page- yahoo small business; account: imap, server : smtp , protocol ; smtp, port 25 , secure (ssl) no socket error: 11001, error number : 0x800ccc0d"
    i have installed microsoft office, with outlook, a new safety registry mechanic, and i still get this block. i cannot look for a job, or answer any job ad.

    Have you tried logging out of your account via Settings > Store and tapping on your account id on the right-hand side, and the logging back in to see if that makes any difference ?
    You could also try a reset and see if you can then download them after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    A third option is to download one of the updates to your computer's iTunes and connect your iPad to it and sync it across, and then see if you can download the other apps/updates directly on the iPad.

  • Flash builder 4.7 debug via usb device iPhone 4s - device not found

    I cannot find my iphone 4s while trying to debug via usb =(
    i exported ipa and installed it via itunes - this works. but i would love to debug on device.
    im using actionscript mobile project air 3.4
    im using windows 7
    ==================offtopic====================
    also how do i add icons for iphone?
    Thank you for your time! Cheers!

    Hi ,
    Please provide more info on the above issue:
    1.What is the message shown when you try to debug the application via USB on iOS device ?
    2.Are you able to debug on other iOS devices ?
    Run this below command from commandline :
    "C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.348139\AIRSDK\lib \aot\bin\iOSBin\idb.exe" -devices
    Note:Make sure your  device is connected to the machine.
    The above command should list all the iOS devices connected to the machine. If a single device is connected,Flash Builder installs application  on device and waits for debugger connection. If multiple devices are connected, choose device dialog will be shown.
    Thanks,
    Sanjay

Maybe you are looking for