XPower X58:the system stops at debug code CO or C0

I just put together a new build with the following specs and the system stops at debug code CO or C0:
I assume it is C Zero as the manual shows three C Debug codes C0 C1 C2
Big Bang XPower LGA 1366 Intel X58
Intel Core i7-950 Bloomfield 3.06GHz processor
ASUS ENGTS450 DC OC/DI/1GD5 GeForce GTS 450 Vid card
12GB G.SKILL 6GB DDR3 1600
CORSAIR CMPSU-750TX 750 watt
WWD1001FALS 1TB 7200 RPM 32MB
Nothing fancy has been done to the machine. The phase power LED’s all show phase 2.
The CPU phase lights are all on, full 16. No green light on monitor but fan on video card is running, so it has proper power.
The startup flashes FF then CF then C0 or CO. FF is about .1 seconds, CF is about .2 seconds, and then it stops at C0 or CO. The manual says “Early CPU initialization”. I really don’t know where to go with this. I would really be grateful for some help and direction on this one. Also if someone can point me toward a complete and possibly better information source on the complete list of Debug codes.

Quote
A7666IMS V1.3 082820 For me thats kind of a strange AM bios signature, but its all I see on screen.
A = AMI BIOS Code
7666 = your board's model number
I = Intel Chipset board
MS = MSI Standard BIOS Release
v1.3 = your current BIOS Version
082820 = BIOS Release Date [are you sure it says "20" at the end? --> anyway, not important]
Quote
I do not recommend updating to V1.4. Wait until a final release of V1.5.
v1.5 is already out there: http://eu.msi.com/product/mb/Big-Bang-XPower.html#/?div=BIOS
Bbryon, have you tested with one memory module only?
Quote
I am in my 50’s, and classically old
Quote
I guess being in my mid 60's makes me an antique!
Guys, I need you focussed!

Similar Messages

Kernel-Power Event ID 41: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

Hello, Currently we are seeing this issue with a couple of our Lenovo T420s laptops with a Solid State Drive. ruffly about 10 or so. The Reboots happen randomly and do not create a dump file. We have contacted Lenovo and they are
not sure why its happening. Since this Crash I set it for Minidump this did not work my next steps will be to Disable Automatic restart on System Failure to see if it brings anything up. I am also looking at using Procmon to dump to a file as well.
If anyone has any other ideas please let me know.
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
+ System
- Provider
   [ Name] Microsoft-Windows-Kernel-Power
   [ Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}
   EventID 41
   Version 2
   Level 1
   Task 63
   Opcode 0
   Keywords 0x8000000000000002
- TimeCreated
   [ SystemTime] 2012-02-01T00:02:48.677610900Z
   EventRecordID 8270
   Correlation
- Execution
   [ ProcessID] 4
   [ ThreadID] 8
   Channel System
   Computer LR8K6TLC.cntr.thrivent.corp
- Security
   [ UserID] S-1-5-18
- EventData
BugcheckCode 0
BugcheckParameter1 0x0
BugcheckParameter2 0x0
BugcheckParameter3 0x0
BugcheckParameter4 0x0
SleepInProgress false
PowerButtonTimestamp 129725280988099400
Event 89, Kernel-Power
ACPI thermal zone ACPI\ThermalZone\THM0 has been enumerated.
_PSV = 0K
_TC1 = 0
_TC2 = 0
_TSP = 0ms
_AC0 = 0K
_AC1 = 0K
_AC2 = 0K
_AC3 = 0K
_AC4 = 0K
_AC5 = 0K
_AC6 = 0K
_AC7 = 0K
_AC8 = 0K
_AC9 = 0K
_CRT = 371K
_HOT = 0K
_PSL - see event data.
---- Details
+
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
89
Version
0
Level
4
Task
86
Opcode
0
Keywords
0x8000000000000020
TimeCreated
[ SystemTime]
2012-02-01T00:02:49.270411900Z
EventRecordID
8271
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
68
Channel
System
Computer
LR8K6TLC.cntr.thrivent.corp
Security
[ UserID]
S-1-5-18
EventData
ThermalZoneDeviceInstanceLength
21
ThermalZoneDeviceInstance
ACPI\ThermalZone\THM0
AffinityCount
1
_PSV
0
_TC1
0
_TC2
0
_TSP
0
_AC0
0
_AC1
0
_AC2
0
_AC3
0
_AC4
0
_AC5
0
_AC6
0
_AC7
0
_AC8
0
_AC9
0
_CRT
371
_HOT
0
_PSL
0000000000000000
Thank you.

We have tested and checked both the Bios and firmware of the SSD Drive's
Bios was up to date and no issue
Firmware was also up to date as well.
Users are still experiencing random Reboots.   I tried to capture the issue with Procmon but since the PC shutdown (Goes to a black screen no power at all even when turning the "Automatically
restart" off under Startup and Recovery) No dmp files as of yet. Unable to configure Procdump due to not knowing where the issue is and what is causing it to happen.
Going to replace one of the PC's with a New one with different hardware to see if this resolve the issue. If anyone has any idea's to be able to capture what maybe happening that would
be great.
Thank you.

How to find the System Dbtype in java code

How to find the System Dbtype in java code
I need various Db connection my project (oracle, sq l,sybase,db2),So How to find the System Dbtype in java code

Welcome to the Forums.
Please go through the FAQ of the Forum.
You has posted your query in the wrong Forum, this one is dedicated to Oracle Forms.
Please try {forum:id=1050}.
Regards,

When I try to save a file the system stops responding.

When I try to save a file the system stops responding.

Thanks, Bill. Here's what I get when I try to "save as"

Sunstudio 11 locks the system up when debugging GUI code

Since I haven't seen any answers to this problem, here it is again. I have an application that is GUI driven. I am running Sunstudio 11 on Solaris 8/sparc. To debug the application I set a breakpoint and start the program in the sunstudio debugger, when the breakpoint is reached, execution stops. I click on sunstudio to start single stepping and then both sunstudio and the program I am debugging become unresponsive. When I click on the console the whole system become unresponsive and I have to rlogin from another machine to kill the programs.
Has anyone else seen this happen? Any ideas on what to try to kick these into becoming responsive again?
Thanks.

This sounds like the famous "X windows screen grab" problem.
http://www.gtk.org/faq/#AEN462
Your application uses a toolkit that probably supports some sort
of "synchronous" command line option to unlock the screen most of the time.
Here is another link:
http://sourceware.org/ml/bug-gdb/2000-09/msg00039.html
--chris

Program exits with the System.exit(3) exit code, help?

When I ran my program(a simulation for a wind powered vehicle), it suddenly ends with no apparent reason, and returns System.exit(3) exit code.
I have no Idea what this exit code means, and thus am stuck in the debugging...
Help is greatly appreciated

No error messages?
If not, then you need to search for all instances of
catch (WhateverException var) {}and replace them with
catch (WhateverException var) {
var.printStackTrace();
}

Why the system stopped

Does anyone knows why the system became unavailable. Dev_disp trace is appended. Did u201CBIDANDSAu201D run something?:
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        VHR
systemid   562 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    102
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        3872
Mon Jul 21 22:40:52 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3872) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 102 successfully loaded
     shared lib "dw_xtc.dll" version 102 successfully loaded
     shared lib "dw_stl.dll" version 102 successfully loaded
     shared lib "dw_gui.dll" version 102 successfully loaded
     shared lib "dw_mdm.dll" version 102 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Jul 21 22:40:57 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >unidev_VHR_00                           <
DpShMCreate: sizeof(wp_adm)          20608     (1472)
DpShMCreate: sizeof(tm_adm)          5584592     (27784)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1848)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000F250050, size: 6275968)
DpShMCreate: allocated sys_adm at 000000000F250050
DpShMCreate: allocated wp_adm at 000000000F251F40
DpShMCreate: allocated tm_adm_list at 000000000F256FC0
DpShMCreate: allocated tm_adm at 000000000F257020
DpShMCreate: allocated wp_ca_adm at 000000000F7AA6F0
DpShMCreate: allocated appc_ca_adm at 000000000F7B04B0
DpShMCreate: allocated comm_adm at 000000000F7B23F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F839080
DpShMCreate: allocated gw_adm at 000000000F839100
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F839130
DpShMCreate: allocated wall_adm at 000000000F839140
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1626]
***LOG Q0K=> DpMsAttach, mscon ( unidev) [dpxxdisp.c   11664]
DpStartStopMsg: send start message (myname is >unidev_VHR_00                           <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 102
Release check o.K.
Mon Jul 21 22:41:02 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Tue Jul 22 09:05:16 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 1464
    (SI_ECONN_BROKEN/10054; I4; ST; 193.77.101.10:1054) [nixxi.cpp    4248]
Network error of client T16, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T16 is 193.77.101.10(bsn-77-101-10.dsl.siol.net)
***LOG Q04=> DpRTmPrep, NiBufReceive (71 HLANCNMA 16 xpsm1330 ) [dpxxdisp.c   11375]
RM-T16, U71, 300     HLANCNMA, xpsm1330, 08:57:25, M1, W1, LX03, 6/3
Tue Jul 22 09:38:40 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 1464
    (SI_ECONN_BROKEN/10054; I4; ST; 193.77.101.10:1076) [nixxi.cpp    4248]
Network error of client T16, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T16 is 193.77.101.10(bsn-77-101-10.dsl.siol.net)
***LOG Q04=> DpRTmPrep, NiBufReceive (76 HLANCNMA 16 xpsm1330 ) [dpxxdisp.c   11375]
RM-T16, U76, 300     HLANCNMA, xpsm1330, 09:31:00, M0, W0, SE38, 3/1
Tue Jul 22 18:13:36 2008
ERROR => DpRqCheck: mode 1 in status CANCEL [dpxxdisp.c   6908]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c   5196]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5991): [dpxxdisp.c   5198]
-IN-- sender_id DISPATCHER        tid 14    wp_ca_blk   36      wp_id 0
-IN-- action    SEND_TO_WP        uid 162   appc_ca_blk -1      type DIA
-IN-- new_stat NO_CHANGE         mode 1     len         9       rq_id 39011
-IN-- req_info MSG_WITH_REQ_BUF MSG_WITH_OH
-IN-- forward to T14/U162/M1
Wed Jul 23 09:59:10 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 7 / sock 1388
    (SI_ECONN_BROKEN/10054; I4; ST; 192.168.12.51:1371) [nixxi.cpp    4248]
Network error of client T14, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Wed Jul 23 09:59:23 2008
WARNING => NiAddrToHost took 13 seconds [dpxxdisp.c   18945]
Client address of T14 is 192.168.12.51(192.168.12.51)
***LOG Q04=> DpRTmPrep, NiBufReceive (254 BIZJAKSA 14 sasa ) [dpxxdisp.c   11375]
RM-T14, U254, 300     BIZJAKSA, sasa, 09:17:37, M0, W1, SPRO, 4/1
Wed Jul 23 15:48:05 2008
SoftCancel request for T14 U318 M0 received from REMOTE_TERMINAL
Wed Jul 23 16:10:54 2008
SoftCancel request for T14 U359 M0 received from REMOTE_TERMINAL
Wed Jul 23 16:12:58 2008
SoftCancel request for T14 U359 M0 received from REMOTE_TERMINAL
Wed Jul 23 16:13:00 2008
DpHdlDeadWp: restart wp (pid=1756) automatically
Wed Jul 23 16:13:32 2008
Network error of client T14, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Wed Jul 23 16:13:34 2008
Client address of T14 is 192.168.12.27(DREAMER)
***LOG Q04=> DpRTmPrep, NiBufReceive (359 BIDANDSA 14 dreamer ) [dpxxdisp.c   11375]
RM-T14, U359, 300     BIDANDSA, dreamer, 16:12:36, M0, W0, SE38, 2/2
Wed Jul 23 16:13:46 2008
ERROR => W0 (pid 3344) died [dpxxdisp.c   14319]
Wed Jul 23 16:14:26 2008
ERROR => W0 (pid 504) died [dpxxdisp.c   14319]
Wed Jul 23 16:14:46 2008
ERROR => W0 (pid 1548) died [dpxxdisp.c   14319]
Wed Jul 23 16:15:06 2008
ERROR => W0 (pid 3808) died [dpxxdisp.c   14319]
Wed Jul 23 16:15:26 2008
ERROR => W0 (pid 3516) died [dpxxdisp.c   14319]
Wed Jul 23 16:15:46 2008
ERROR => W0 (pid 2328) died [dpxxdisp.c   14319]
Wed Jul 23 16:16:06 2008
ERROR => W0 (pid 1556) died [dpxxdisp.c   14319]
Wed Jul 23 16:16:21 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 7 / sock 1352
    (SI_ECONN_BROKEN/10054; I4; ST; 192.168.12.27:1721) [nixxi.cpp    4248]
Network error of client T16, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
Client address of T16 is 192.168.12.27(DREAMER)
***LOG Q04=> DpRTmPrep, NiBufReceive (361 16 dreamer ) [dpxxdisp.c   11375]
RM-T16, U361, 000             , dreamer, 16:14:01, M0, W3,     , 2/0
Wed Jul 23 16:16:26 2008
ERROR => W0 (pid 3060) died [dpxxdisp.c   14319]
Wed Jul 23 16:16:46 2008
ERROR => W0 (pid 1416) died [dpxxdisp.c   14319]
Wed Jul 23 16:17:06 2008
ERROR => W0 (pid 1496) died [dpxxdisp.c   14319]
Wed Jul 23 16:17:12 2008
SoftCancel request for T19 U274 M5 received from REMOTE_TERMINAL
Wed Jul 23 16:17:18 2008
DpHdlDeadWp: restart wp (pid=2076) automatically
Wed Jul 23 16:17:26 2008
ERROR => W0 (pid 2960) died [dpxxdisp.c   14319]
Wed Jul 23 16:24:12 2008
DpHdlDeadWp: restart wp (pid=340) automatically
Wed Jul 23 16:24:32 2008
DpHdlDeadWp: restart wp (pid=3612) automatically
Wed Jul 23 16:25:12 2008
DpHdlDeadWp: restart wp (pid=2172) automatically
Wed Jul 23 16:27:32 2008
DpHdlDeadWp: restart wp (pid=3492) automatically
Wed Jul 23 16:31:08 2008
SoftCancel request for T19 U274 M2 received from REMOTE_TERMINAL
Wed Jul 23 16:31:32 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 16:32:12 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 16:53:01 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 16:53:41 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 23 (60secs)-> disconnecting [dpxxdisp.c   12158]
RM-T23, U366,                 , Marko, 16:32:26, M0, W-1,     , 1/0
Wed Jul 23 16:54:33 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 16:55:13 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 16:55:53 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 16:56:33 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 16:57:13 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 16:57:53 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 16:58:33 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 16:59:13 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 20 (60secs)-> disconnecting [dpxxdisp.c   12158]
RM-T20, U363,                 , Marko, 16:17:48, M0, W-1,     , 1/0
Wed Jul 23 16:59:33 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 21 (60secs)-> disconnecting [dpxxdisp.c   12158]
RM-T21, U364,                 , Marko, 16:18:06, M0, W-1,     , 1/0
Wed Jul 23 16:59:53 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 17:00:33 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 18 (60secs)-> disconnecting [dpxxdisp.c   12158]
RM-T18, U367,                 , Marko, 16:39:19, M0, W-1,     , 1/0
Wed Jul 23 17:01:13 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 17:01:53 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 17:02:33 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 17:03:13 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 17:03:53 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 17:04:33 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 17:04:53 2008
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 22 (60secs)-> disconnecting [dpxxdisp.c   12158]
RM-T22, U365,                 , Marko, 16:23:27, M0, W-1,     , 1/0
Wed Jul 23 17:05:13 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
ERROR => DpCheckTerminals: NiCheck2(rc=-23) failed for tid: 24 (60secs)-> disconnecting [dpxxdisp.c   12158]
RM-T24, U368,                 , Marko, 16:43:56, M0, W-1,     , 1/0
Wed Jul 23 17:05:53 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 17:06:33 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 17:07:13 2008
DpEnvCheck: set dp_high_prio_state to DP_HPRIO_TIMEOUT (1 rqs)
Wed Jul 23 17:07:52 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1392
    (SI_ECONN_BROKEN/10054; I4; ST; 192.168.12.63:1273) [nixxi.cpp    4248]
Network error of client T19, NiBufReceive (-6: NIECONN_BROKEN), dp_tm_status=3
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
B
B Mon Jul 21 22:40:57 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\UHR\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'C:\usr\sap\UHR\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\UHR\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.87)
B New connection 0 created
M sysno      00
M sid        UHR
M systemid   562 (PC with Windows NT)
M relno      7000
M patchlevel 0
M patchno    102
M intno      20050900
M make:      multithreaded, Unicode, 64 bit, optimized
M pid        1756
M
M kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1756) [dpxxdisp.c   1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm)          20608     (1472)
M DpShMCreate: sizeof(tm_adm)          5584592     (27784)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm)          552080     (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm)          0     (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm)          0     (72)
M DpShMCreate: sizeof(vmc_adm)          0     (1848)
M DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm)     48
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000F250050, size: 6275968)
M DpShMCreate: allocated sys_adm at 000000000F250050
M DpShMCreate: allocated wp_adm at 000000000F251F40
M DpShMCreate: allocated tm_adm_list at 000000000F256FC0
M DpShMCreate: allocated tm_adm at 000000000F257020
M DpShMCreate: allocated wp_ca_adm at 000000000F7AA6F0
M DpShMCreate: allocated appc_ca_adm at 000000000F7B04B0
M DpShMCreate: allocated comm_adm at 000000000F7B23F0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F839080
M DpShMCreate: allocated gw_adm at 000000000F839100
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F839130
M DpShMCreate: allocated wall_adm at 000000000F839140
X
X Mon Jul 21 22:40:58 2008
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host unidev
M
M Mon Jul 21 22:41:00 2008
M calling db_connect ...
C Thread ID:2896
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\UHR\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      87
C    patchcomment MSSQL: UTAB/ATAB/Dynp-access via clientside cursor (1002914)
C np:(local) connection used on UNIDEV
C CopyLocalParameters: dbuser is 'uhr'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.2047.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 104 bytes, 20000 names (32800000 bytes), 500 dynamic statements (2872000 bytes), total 35672104 bytes
C Using shared procedure name cache UNIDEV_UHRUHR_UHR_MEM initialized by another process.
C Connected to db server : [UNIDEV] server_used : [np:(local)], dbname: UHR, dbuser: uhr
C pn_id:UNIDEV_UHRUHR_UHR
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20080721 224100 UNIDEV
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Mon Jul 21 22:41:05 2008
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 000000001B590050, size: 4400128)
M SHM_ROLL_AREA          (addr: 000007FFD1900050, size: 61865984)
M SHM_PAGING_AREA          (addr: 000000001B9D0050, size: 33554432)
M SHM_ROLL_ADM               (addr: 000000001D9E0050, size: 618548)
M SHM_PAGING_ADM          (addr: 000000001DA80050, size: 525344)
M ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 000000001DB10050
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 12176 bytes (50 server) at 000000001DBA0050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 14, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000023160160, size: 30000128, end: 0000000024DFC560)
B dbtbxbuf: Buffer TABLP (addr: 0000000024E00160, size: 10240000, end: 00000000257C4160)
B dbexpbuf: Buffer EIBUF (addr: 00000000257E0170, size: 4194304, end: 0000000025BE0170)
B dbexpbuf: Buffer ESM   (addr: 0000000025BF0170, size: 4194304, end: 0000000025FF0170)
B dbexpbuf: Buffer CUA   (addr: 0000000026000170, size: 3072000, end: 00000000262EE170)
B dbexpbuf: Buffer OTR   (addr: 00000000262F0170, size: 4194304, end: 00000000266F0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Mon Jul 21 22:41:06 2008
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 00000000138F2930
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 000000002FA100D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 000000002FA10530
S    using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2176 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 25844kb, dir_size: 12872kb.
A Attached to PXA (address 000007FFD5410050, size 700000K, 2 fragments of 337080K )
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4FEC1000 leng=20955136 end=000007FF512BD000)
A >> Shm MMADM area (addr=000007FF5039AEB0 leng=244096 end=000007FF503D6830)
A >> Shm MMDAT area (addr=000007FF503D7000 leng=15622144 end=000007FF512BD000)
A RFC Destination> destination unidev_UHR_00 host unidev system UHR systnr 0 (unidev_UHR_00)
A RFC Options> H=unidev,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 14784 bytes at 000000002FB80050
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\UHR\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\UHR\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B    dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
B     max_blocking_factor = 50, max_in_blocking_factor      = 255,
B     min_blocking_factor =   5, min_in_blocking_factor      = 10,
B     prefer_union_all    =   1, prefer_join                 =   1,
B     prefer_fix_blocking =   0, prefer_in_itab_opt          =   0,
B     convert AVG         =   1, alias table FUPD            =   0,
B     escape_as_literal   =   0, opt GE LE to BETWEEN        =   0,
B     select *            =0x00, character encoding          = STD / []:X,
B     use_hints           = abap->1, dbif->0x1, upto->0, rule_in->0,
B                           rule_fae->0, concat_fae->0, concat_fae_or->0
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 2
W    ITS Plugin: Release: 700, [7000.0.102.20050900]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [13]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
C
C Mon Jul 21 22:41:12 2008
C The IRow interface is supported by this OLEDB provider
B table logging switched off for all clients
M
M Mon Jul 21 22:41:27 2008
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 000000000B130050
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 000000000B1307C0
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 000000000B130800
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 000000000B13080C
B
B Mon Jul 21 22:41:28 2008
B dbmyclu : info : my major identification is 3232238598, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 01:00:00h GMT.
B dbmyclu : info : my initial uuid is DD576563AFC954F1AFC00019DB2FD4E5.
B dbmyclu : info : current optimistic cluster level: 3
B dbmyclu : info : pessimistic reads set to 2.
M
M Mon Jul 21 22:41:49 2008
M ThIUsrDel: th_rollback_usrdelentry = 1
S
S Mon Jul 21 23:06:17 2008
S found spool memory service RSPO-ACTIONS at 000000002FA1A270
M
M Tue Jul 22 01:55:30 2008
M *** ERROR => PfFileIndUpd: new Index is initial [pfhypind.c   1546]
M *** ERROR => PfWriteIntoFile: failed to update fileindex (rc=7) [pfxxstat.c   4458]
A
A Tue Jul 22 08:50:00 2008
A generated report BAPI_MATERIAL_GET_DETAIL======FT         with fingerprint F5FC699E14ADB0B547CC7986C2A4C095| 39605
A
A Tue Jul 22 09:44:06 2008
A generated report RQGAAM31                                 with fingerprint C9A7D68E2C97749BC6D0C456AB2AC44F| 401746
S
S Tue Jul 22 09:51:04 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
B
B Tue Jul 22 09:53:09 2008
B ***LOG BYE=> invalid interface parameter ObjTooLar [dbexpbuf#2 @ 3496] [dbexpbuf3496 ]
B dbexpbuf[0]: Object (CONTEXTB                         300IBFREE_SEL_DD_INFO    000005000220080722090000) is too large (= 897446)
B
B Tue Jul 22 09:53:10 2008
B ***LOG BYE=> invalid interface parameter ObjTooLar [dbexpbuf#2 @ 3496] [dbexpbuf3496 ]
B dbexpbuf[0]: Object (CONTEXTB                         300IBFREE_SEL_DD_INFO    000005000220080722090000) is too large (= 1076066)
S
S Tue Jul 22 09:59:16 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S handle memory type is RSTSPROMMM
S
S Tue Jul 22 09:59:53 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S
S Tue Jul 22 10:02:30 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
A
A Tue Jul 22 10:08:52 2008
A generated report /1BCDWB/DBT005T                          with fingerprint EE548C1AA44FB8D5F4FB46488B17C8C4| 123144
S
S Tue Jul 22 10:11:32 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
A
A Tue Jul 22 10:20:58 2008
A generated report RSM51000_ALV                             with fingerprint 5F163D87ACDB8AD86CCF1C87F126AF2E| 226054
A
A Tue Jul 22 10:20:59 2008
A generated report SAPLSGWY                                 with fingerprint 483DD182BF64B6C3B7E32A3176FCF31E| 159038
A
A Tue Jul 22 10:29:37 2008
A generated report ZSD_PICKING2                             with fingerprint 55C529CC3D67BE7948A17F86E90E121C| 139312
A
A Tue Jul 22 10:35:04 2008
A generated report ZSD_PICKING2                             with fingerprint 55C529CC3D67BE7948A17F86E90E121C| 139312
A
A Tue Jul 22 10:35:10 2008
A generated report ZSD_PICKING2                             with fingerprint 55C529CC3D67BE7948A17F86E90E121C| 139312
A
A Tue Jul 22 10:46:31 2008
A generated report ZSD_PICKING2                             with fingerprint 54A3965E02EBAB52B17B24A111A0D7FA| 140596
A
A Tue Jul 22 10:49:26 2008
A generated report ZSD_PICKING2                             with fingerprint 634209006A8318BC2592C11A26F91501| 141036
A
A Tue Jul 22 10:49:59 2008
A generated report ZSD_PICKING2                             with fingerprint 634209006A8318BC2592C11A26F91501| 141036
A
A Tue Jul 22 10:52:23 2008
A generated report ZSD_PICKING2                             with fingerprint 634209006A8318BC2592C11A26F91501| 141036
A
A Tue Jul 22 10:59:07 2008
A generated report ZSD_PICKING2                             with fingerprint 634209006A8318BC2592C11A26F91501| 141036
A
A Tue Jul 22 10:59:12 2008
A generated report ZSD_PICKING2                             with fingerprint 634209006A8318BC2592C11A26F91501| 141036
A
A Tue Jul 22 11:01:41 2008
A generated report ZSD_PICKING2                             with fingerprint 634209006A8318BC2592C11A26F91501| 141036
A
A Tue Jul 22 11:03:53 2008
A generated report ZSD_PICKING2                             with fingerprint 634209006A8318BC2592C11A26F91501| 141036
A
A Tue Jul 22 11:04:55 2008
A generated report ZSD_PICKING2                             with fingerprint 634209006A8318BC2592C11A26F91501| 141036
A
A Tue Jul 22 11:08:17 2008
A generated report ZSD_PICKING2                             with fingerprint 634209006A8318BC2592C11A26F91501| 141036
A
A Tue Jul 22 11:10:15 2008
A generated report ZSD_PICKING2                             with fingerprint 8891B5A8EC7822D058463E1B46BA63AA| 141996
A
A Tue Jul 22 11:11:58 2008
A generated report ZSD_PICKING2                             with fingerprint 2BBA95A1B82D64006DACD0FF8A46C27D| 146064
A
A Tue Jul 22 11:12:12 2008
A generated report ZSD_PICKING2                             with fingerprint 2BBA95A1B82D64006DACD0FF8A46C27D| 146064
A
A Tue Jul 22 11:15:38 2008
A generated report ZSD_PICKING2                             with fingerprint D318ECF472CC69E0F6F15D7ECABBFB91| 146960
A
A Tue Jul 22 11:18:08 2008
A generated report ZSD_PICKING2                             with fingerprint 2E034C955E88C177DC8950ABC8E32D66| 147244
A
A Tue Jul 22 11:23:33 2008
A generated report ZSD_PICKING2                             with fingerprint 8FD43A8F2E4E4D21F1ADC869C0B4CBB7| 147764
A
A Tue Jul 22 11:24:23 2008
A generated report ZSD_PICKING2                             with fingerprint FCA6327240977F61D65FB9B2BC8DA3DE| 148852
S
S Tue Jul 22 11:26:05 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
A
A Tue Jul 22 11:28:05 2008
A generated report ZSD_PICKING2                             with fingerprint 2B5B9232DEFB2BFE7086380DD01870E2| 149334
A
A Tue Jul 22 11:28:45 2008
A generated report ZSD_PICKING2                             with fingerprint 1F840A2650E09A2388A22D7AAA20F9EF| 149402
A
A Tue Jul 22 11:29:43 2008
A generated report ZSD_PICKING2                             with fingerprint 9D84E6B594FD15B1FA39CD201B9BAB95| 149386
A
A Tue Jul 22 11:31:50 2008
A generated report ZSD_PICKING2                             with fingerprint 48223582D932269E5D2E5BC031CB73CD| 149450
A
A Tue Jul 22 11:36:11 2008
A generated report ZSD_PICKING2                             with fingerprint 48223582D932269E5D2E5BC031CB73CD| 149450
A
A Tue Jul 22 11:37:40 2008
A generated report ZSD_PICKING2                             with fingerprint 48223582D932269E5D2E5BC031CB73CD| 149450
A
A Tue Jul 22 11:40:18 2008
A generated report ZSD_PICKING2                             with fingerprint 782AA3736B315EEA00BC7B09BD3C5C2F| 150260
A
A Tue Jul 22 11:45:54 2008
A generated report ZSD_PICKING2                             with fingerprint 05E3B62A0ED9DEBD830B52A4F9530AB3| 149274
A
A Tue Jul 22 11:46:44 2008
A generated report ZSD_PICKING2                             with fingerprint 07CD1DD13287939E56FE81656DB9BAF9| 149286
S
S Tue Jul 22 11:53:51 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S
S Tue Jul 22 11:53:54 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
A
A Tue Jul 22 11:54:14 2008
A generated report ZSD_PICKING2                             with fingerprint 07CD1DD13287939E56FE81656DB9BAF9| 149286
A
A Tue Jul 22 11:56:17 2008
A generated report SAPICN__                                 with fingerprint C3D1C351774FA9FCA1734EFAA15F582B| 291944
S
S Tue Jul 22 11:56:41 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S
S Tue Jul 22 11:56:58 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S
S Tue Jul 22 11:58:37 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S
S Tue Jul 22 11:58:41 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S
S Tue Jul 22 11:59:39 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S
S Tue Jul 22 12:01:17 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
A
A Tue Jul 22 12:01:31 2008
A generated report ZSD_PICKING2                             with fingerprint F59A5C1748323816E8609C662D543581| 149502
S
S Tue Jul 22 12:10:00 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S
S Tue Jul 22 12:10:14 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
A
A Tue Jul 22 12:37:26 2008
A generated report CL_EX_FI_PAYREF_BADI_010======CP         with fingerprint A894E6CF0D4B166F9D75ACA293F40D95| 16362
A generated report IF_EX_FI_PAYREF_BADI_010======IP         with fingerprint D83E71FAF6452700CAB48AA281C07B5E|   4849
S
S Tue Jul 22 12:44:12 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
D
D Tue Jul 22 13:16:39 2008
D *** ERROR => invalid value hacurrow 22 hwcurrow 16 [diagoutp.c   1071]
D *** ERROR =>   Dynpro      SAPMSYST [diagoutp.c   1072]
D *** ERROR =>   Dynpro nr   0020 [diagoutp.c   1073]
D *** ERROR => platform      : GUIAPI on NT [diagsrv.c    802]
D *** ERROR => gui version   : 640        [diagsrv.c    811]
D *** ERROR => gui patchlevel:                                                    [diagsrv.c    819]
D *** ERROR => transaction   :                      [diagsrv.c    827]
D *** ERROR => user          :              [diagsrv.c    841]
D *** ERROR => display    : unichemts1 [diagsrv.c    847]
D *** ERROR => invalid value hacurcol 84 hwcurcol 20 [diagoutp.c   1079]
D *** ERROR =>   Dynpro      SAPMSYST [diagoutp.c   1080]
D *** ERROR =>   Dynpro nr   0020 [diagoutp.c   1081]
D *** ERROR => platform      : GUIAPI on NT [diagsrv.c    802]
D *** ERROR => gui version   : 640        [diagsrv.c    811]
D *** ERROR => gui patchlevel:                                                    [diagsrv.c    819]
D *** ERROR => transaction   :                      [diagsrv.c    827]
D *** ERROR => user          :              [diagsrv.c    841]
D *** ERROR => display    : unichemts1 [diagsrv.c    847]
D
D Tue Jul 22 13:16:52 2008
D *** ERROR => invalid value hacurrow 22 hwcurrow 16 [diagoutp.c   1071]
D *** ERROR =>   Dynpro      SAPMSYST [diagoutp.c   1072]
D *** ERROR =>   Dynpro nr   0020 [diagoutp.c   1073]
D *** ERROR => platform      : GUIAPI on NT [diagsrv.c    802]
D *** ERROR => gui version   : 640        [diagsrv.c    811]
D *** ERROR => gui patchlevel:                                                    [diagsrv.c    819]
D *** ERROR => transaction   :                      [diagsrv.c    827]
D *** ERROR => user          :              [diagsrv.c    841]
D *** ERROR => display    : unichemts1 [diagsrv.c    847]
D *** ERROR => invalid value hacurcol 84 hwcurcol 20 [diagoutp.c   1079]
D *** ERROR =>   Dynpro      SAPMSYST [diagoutp.c   1080]
D *** ERROR =>   Dynpro nr   0020 [diagoutp.c   1081]
D *** ERROR => platform      : GUIAPI on NT [diagsrv.c    802]
D *** ERROR => gui version   : 640        [diagsrv.c    811]
D *** ERROR => gui patchlevel:                                                    [diagsrv.c    819]
D *** ERROR => transaction   :                      [diagsrv.c    827]
D *** ERROR => user          :              [diagsrv.c    841]
D *** ERROR => display    : unichemts1 [diagsrv.c    847]
S
S Tue Jul 22 13:17:47 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S
S Tue Jul 22 13:17:53 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S
S Tue Jul 22 13:22:11 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
A
A Tue Jul 22 13:30:40 2008
A generated report SAPLJBD2                                 with fingerprint FB3DAF00A6135001932F0D3AAD95CCFF| 273918
S
S Tue Jul 22 13:34:22 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
S
S Tue Jul 22 13:34:23 2008
S *** ERROR => C call error 084(SPOC): area POSSUTIL unknown [rspoabap.c   639]
A
A Tue Jul 22 16:09:03 2008
A generated report /1BCDWB/DBMLGT                           with fingerprint 9A6F604FBBA14A33DC96415A827B123C| 132316
M
M Tue Jul 22 16:40:58 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 16:42:18 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 16:43:45 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 16:44:50 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 16:47:12 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 16:49:09 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 16:52:19 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 16:52:48 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 16:53:05 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 17:00:14 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
Y
Y Tue Jul 22 17:05:32 2008
Y *** ERROR => bsdup etype 32 not implemented [dybasbsdup.c 1827]
Y *** ERROR => bsdup etype 103 not implemented [dybasbsdup.c 1827]
M
M Tue Jul 22 17:06:33 2008
M *** WARNING => ThSndDelUser: delete client/user 300/BIZJAKSA     (T19) on server unidev_UHR_00
Y
Y Tue Jul 22 17:07:30 2008
Y *** ERROR => bsdup etype 32 not implemented [dybasbsdup.c 1827]
Y *** ERROR => bsdup etype 103 not implemented [dybasbsdup.c 1827]
M
M Tue Jul 22 17:14:21 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 17:26:45 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 17:30:39 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 17:38:32 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 17:39:23 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 17:40:51 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 17:43:48 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 17:54:43 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 17:57:01 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 18:02:01 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
M
M Tue Jul 22 18:02:22 2008
M *** ERROR => ThIDbgCreate: ThICreateAltMode failed (27) [thxxdbg.c    1326]
M *** ERROR => ThDbgDiscardOutbuf: No debugger attached ? [thxxdbg.c    858]
M *** ERROR => ThDbgGetOutbuf: No debugger attached ? [thxxdbg.c    772]
A *** ERROR => TPDA: illegal state while switching off [abtpdmess.c 1148]
A
A Wed Jul 23 10:22:19 2008
A generated report SAPLZWM_ITS                              with fingerprint ED19F251BF60B9EFA02F41623644A153| 775307
A
A Wed Jul 23 10:39:10 2008
A generated report SAPLZWM_ITS                              with fingerprint 40E5A24C9E0CFE1FC11E73021AA7D768| 775115
A
A Wed Jul 23 10:39:23 2008
A generated report Z_WM_ITS_01===================FT         with fingerprint 0FD2E4B3815A3282381876F1DAD85055| 32318
A
A Wed Jul 23 10:40:11 2008
A generated report SAPLZWM_ITS                              with fingerprint F2C4BE68871EB3F8953964A2BEC440E5| 775139
A
A Wed Jul 23 10:40:30 2008
A generated report Z_WM_ITS_01===================FT         with fingerprint 0FD2E4B3815A3282381876F1DAD85055| 32318
A
A Wed Jul 23 10:43:27 2008
A generated report SAPLZWM_ITS                              with fingerprint F2C4BE68871EB3F8953964A2BEC440E5| 775139
A
A Wed Jul 23 10:45:15 2008
A generated report SAPLZWM_ITS                              with fingerprint DD7F323AB366E581F641DD70604C7A71| 775261
A
A Wed Jul 23 10:50:41 2008
A generated report SAPLZWM_ITS                              with fingerprint DD7F323AB366E581F641DD70604C7A71| 775261
A
A Wed Jul 23 10:54:55 2008
A generated report SAPLZWM_ITS                              with fingerprint 18653A001ED6C6965413E04FA55C0C1A| 775337
A
A Wed Jul 23 10:55:20 2008
A generated report Z_WM_ITS_01===================FT         with fingerprint 4005925FF96BDCE971A45EFE9CB8D9CE| 33446
A
A Wed Jul 23 10:56:23 2008
A generated report SAPLZWM_ITS                              with fingerprint 18653A001ED6C6965413E04FA55C0C1A| 775337
A
A Wed Jul 23 10:58:53 2008
A generated report SAPLZWM_ITS                              with fingerprint 92DE24B695CAC5F1519E31F1B97DBAF9| 775365
A
A Wed Jul 23 10:59:03 2008
A generated report SAPLZWM_ITS                              with fingerprint 7DC4155F94E1C0FA70AC7EFA25D66943| 775365
A
A Wed Jul 23 10:59:09 2008
A generated report Z_WM_ITS_01===================FT         with fingerprint 4005925FF96BDCE971A45EFE9CB8D9CE| 33446
A
A Wed Jul 23 11:04:55 2008
A generated report SAPLZWM_ITS                              with fingerprint AB87C907C1C5FE2524FE63971ED5E5F0| 775401
A
A Wed Jul 23 11:05:14 2008
A generated report Z_WM_ITS_01===================FT         with fingerprint 4005925FF96BDCE971A45EFE9CB8D9CE| 33446
A
A Wed Jul 23 11:07:02 2008
A generated report SAPLZWM_ITS                              with fingerprint 11E2FB746C760626805B1AFE05414408| 775409
A
A Wed Jul 23 11:24:36 2008
A generated report SAPLZWM_ITS                              with fingerprint 756DCE162D5B25C898D1E5A5DB860531| 775461
A
A Wed Jul 23 11:25:18 2008
A generated report SAPLZWM_ITS                              with fingerprint 4A8E56370238EAF6601C9EF1CD649AE6| 775461
A
A Wed Jul 23 11:25:32 2008
A generated report SAPLZWM_ITS                              with fingerprint 4A8E56370238EAF6601C9EF1CD649AE6| 775461
A
A Wed Jul 23 11:26:14 2008
A generated report Z_WM_ITS_01===================FT         with fingerprint 1FD7964CF35A3D47C2AF3B685FC0B662| 34562
A
A Wed Jul 23 11:28:31 2008
A generated report SAPLZWM_ITS                              with fingerprint 553819C5E9B6F8067E0DFF47D21E8F5D| 775513
A
A Wed Jul 23 11:30:56 2008
A generated report SAPLZWM_ITS                              with fingerprint 045AD16C7ECACD76F5ADC55E05F1DEB7| 775553
A
A Wed Jul 23 11:33:17 2008
A generated report SAPLZWM_ITS                              with fingerprint FFDC34EE24A5BA8B096BE3ED40C15AEC| 775553
A
A Wed Jul 23 11:33:30 2008
A generated report Z_WM_ITS_01===================FT         with fingerprint 1FD7964CF35A3D47C2AF3B685FC0B662| 34562
A
A Wed Jul 23 11:34:54 2008
A generated report SAPLZWM_ITS                              with fingerprint 091FC12CFBB2CCE4E1554E0D254DBBD5| 775533
A
A Wed Jul 23 11:35:03 2008
A generated report Z_WM_ITS_01===================FT         with fingerprint 1FD7964CF35A3D47C2AF3B685FC0B662| 34562
A
A Wed Jul 23 11:36:15 2008
A generated report SAPLZWM_ITS

Looks like disp+work.exe dumped at the O/S level. Check the windows event log to see if you can find anything.
The user didn't do anything, at best the user could probably crash a single work process, but the process would just restart anyways.
Also, make sure your kernel is upgraded to the latest versions, there were releases of kernel (640 and 700) known to have these dumps.

Report that can take the system: (users, utilization, T-CODE)

I need a report that can take the system:
How many times a user logged into the system in the last month
Most used transactions
Changes passwords.
Etc., all you have to do with a user-level tuning.
thanks,
VLopes

Hi
If you Activate the audit log you can keep track all information,
have a look at   -successful and unsuccessful dialog and RFC logon attempts
                         --successful and unsuccessful transaction and report stats ...
                         how many times a user logged -in and all .yah you need to count
                         the number of times a user logged based on the report.
Once you activate....every day transaction details are recorded for every user
who tries to log in.keep an eye on the below parameters
In RZ10
rsau/enable :set to 1 to activate audit logging
rsau/local/file   :to specify name and location of audit log file
rsau/max_diskspace/local :To specify maximum space for audit file say if
                                            max.size is reached auditing stops
Hope that helps.
regards
Manjula .U

Windows 7 "a patch is preventing the system from starting" error code 0x490

I have a Windows 7 machine.
It was working fine.
Now it will not boot.
When I try system repair, it says:
Root cause found
A patch is preventing the system from starting.
Repair action: System file integrity cheack and repair
Result: Failed. Error code 0x490
I have tried doing safe mode, last known good configuration etc and nothing works
Also, I tried to restore to an early checkpoint, but it claims that none exist, even thought I know we save restore points.
Please advise?

"I suggest running Command Prompt from the repair menu and then Check Disk:
1. Insert the Windows 7 Disc and boot from it.
2. In the recovery menu, choose Command Prompt .
3. Type the following command and press Enter:
Chkdsk /r /f
Please also try the following commands and press Enter at the end of each line:
Ren C:\Windows\winsxs\pending.xml pending.old
Ren C:\windows\SoftwareDistribution SDOLD
Regedit.exe
When the register editor opens, please navigate to the following key:
HKEY_LOCAL_MACHINE\COMPONENTS:
* High light the COMPONENTS key. Please check if the following values exist in the right pane:
AdvancedInstallersNeedResolving
PendingXmlIdentifier
* If so, please right click on them and choose Delete them. Confirm the operation.
* Restart the computer."
Quote from : Vivian Xing
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/227bcd32-f0dd-4aab-942e-07e0cadec083

The CPU fan starts with the case switch on and the system stops after 2 seconds

Hi,
I have just bought the MSI K8N Neo FSR (MS 7030) to build a new computer with (amongst others) an Athlon 64 3000 processor and an Enermax 3051 case.
The CPU fan starts when I switch on the power with the switch on the back of the case, but stops after two seconds. I don't get anything when I push the Start button of the case.
At the beginning I got some feeble orange light on the D-bracket LEDs. Now, there is nothing at all.
I have tried to do a CMOS and also to put the Mobo out of the case after having disconnected the HD, the DVD reader, the floppy disk reader and all the Front panel connectors ===> nothing changed.
The Power capacity of my case is 300 watts. I had computed on Power Supply Wattage Calculator (http://www.jscustompcs.com/power_supply/Power_Supply_Calculator.php?cmd=AMD) that it is quite sufficient for my system.
Other materials on my system: the MSI FX5200-T and a PQI RAM PC 3200 which worked well on a former MSI Mobo (K7N2 Delta). I don't intend to keep this RAM on my new system but I use it to test it, before installing the Corsair Value which are on the system with which I write this post.
Thank you in advance for your help.

Finally, it appears that I had damaged the motherboard and the CPU.
When I installed the CPU, I hesitated because the User's guide said that "the gold arrow should point towards the lever pivot", whereas the illustration and the AMD's one pointed towards the opposite corner. I had finally made the good choice (that of the illustrations), but I have certainly displaced some pins of the processor while hesitating.
The shopper told me that MSI will never agree that its text had troubled me and refused to give me a new motherboard.
I have finally bought an ASUS motherboard and, as I was fed up with the computer building, I paid a technician to do this job.
I would like to mention two other mistakes in the MSI K8N Neo User's guide:
- it devoted one page to the installation of the retention mechanism which was already installed.
- there was no explanation about the mention of two "Power LED" connectors.
I acknowledge that I have been stupid, since I should have asked the question of the direction of the golden arrow in a forum, where I would have found very quckly the right answer to my hesitation.
However, I am revolted that MSI does not acknowledge that a grave mistake and two troubling omissions in the User's Guide can lead novice people to grave failures.
I'll never more have confidence in a company that make such mistakes and does not assume its responsibility.
Once again, thank you for your help.

Write behind cache, DB down, when should the system stop taking new data in

Hello:
We are trying to use Coherence for our custom ESB, which is brokering payloads of various size between consumer and provider applications.
Before Coherence, stopping our DB meant organization-wide outage for critically important business services.
Since we have at least 40G of RAM in production environment, we believe that our app
can use Coherence write-behind option for tolerating at least several hours worth of DB outage.
We are currently using a near cache backed by distributed cache in write-behind mode.
9 business service JVMs (storage enabled=false) use 30 storage enabled JVMs.
IMPORTANT: We need to create an automated alerting facility determining when
amount of unsaved data reaches critical level since DB goes down. This alert should help us decide when our application stops accepting inbound traffic.
It is hard to use QueueSize parameter for that because our payload memory footprint can vary from 1KB to 3MB.
We do not expire any entries in order to enable support queries against the cache during DB outage.
Our experiments with trying various flavors of overflow-scheme resulted in OutOfMemoryError, therefore
we decided to implement RAM-only cache as a first step.
<near-scheme>
<scheme-name>message_payload_scheme</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>limited_entities_front_scheme</scheme-ref>
<high-units>100</high-units>
</local-scheme>
</front-scheme>
<back-scheme>
<distributed-scheme>
<backing-map-scheme>
<read-write-backing-map-scheme>
<internal-cache-scheme>
<local-scheme>
<scheme-ref>limited_bytes_scheme</scheme-ref>
<high-units>199229440</high-units>
</local-scheme>
</internal-cache-scheme>
<cachestore-scheme>
<class-scheme>
<class-name>com.comp.MessagePayloadStore</class-name>
</class-scheme>
</cachestore-scheme>
<read-only>false</read-only>
<write-delay-seconds>3</write-delay-seconds>
<write-requeue-threshold>2147483646</write-requeue-threshold>
</read-write-backing-map-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
</back-scheme>
</near-scheme>
<local-scheme>
<scheme-name>limited_entities_front_scheme</scheme-name>
<eviction-policy>LRU</eviction-policy>
<unit-calculator>FIXED</unit-calculator>
</local-scheme>
<local-scheme>
<scheme-name>limited_bytes_scheme</scheme-name>
<eviction-policy>HYBRID</eviction-policy>
<unit-calculator>BINARY</unit-calculator>
</local-scheme>

Good info ... I feel like I need to restate my original question along with a couple of new questions caused by the discussion above.
Q1. Does Coherence evict 'dirty', or 'queued', or 'unsaved' objects for cache configuration provided above?
The answer should be 'NO', otherwise Coherence is unsafe to use as a system of record,
it should not just drop unsaved information on the floor.
Q2. What happens to the front tier of the near+partitioned write behind cache described above when amount of unsaved data exceeds max cache capacity defined via high-units?
I would expect that map.put starts throwing exceptions: cache storage is full, so it should not accept more data
Q3. How can I determine a moment when amount of dirty data in bytes(!), not in objects, hits 85% of
max allowed cache capasity configured in bytes (using high-units param and BINARY calculator).
'DirtyUnits' counter can probably be built with some lower-level Coherence API. Can we use
this API?
Please, understand, that we purchased Coherence for reliability, for making our
system independent from short DB outages, for keeping our business services up
and running when DBA need some time for admin operations like rebuilding an index.
Performance benefits are secondary and are not as obvious for our system which
uses primary keys only and has a well-tuned co-located Oracle back-end.
We simply cannot put Coherence to production unless we prove that Coherence
can reliably hold the data and give us information about approaching crisis
(the cache full of unsaved data).
If possible, forward this message to Cameron Purdy,
who was presenting Coherence to our team several moths ago.
Thanks,
Vasili Smaliak
Applications Architect, Enterprise App Integration
GMAC ResCap
[email protected]

How can i fix the A2 and 99 debug code of on the X 79-a GD 65 8 dimm

İ am tryed the very different ways but nothing work i love the msi brand but i am very tired now, i dont wanna see any code or error mesages with my x 79 mobo when starting.

Quote from: masterten on 30-May-12, 20:24:25
You were arleady told that these codes are NOT error codes, but just checkpoint codes. MANY motherboards are using this codes to show us what are they doing at PC startup. I have Z77A-G45 and I'm also seeing the codes.
99 - this is the first code that shows up on the monitor after turning PC on
A2 - mobo is detecting IDE devices (hard discs, optical drives).
B4 - mobo is detecting USB devices.
If your PC is booting and working ok - you have nothing to worry about. But if your PC is hanging during a specific startup code, then you can identify the source of the problem.
sorry my brother for that sure not error codes strange! ?? but i am why waiting for seeing boot screen 15 second black screen? later post mobo screen later w7 boot total 34-40 second but i think must be more lower thank you for your help.

Re: MSI X99S XPower AC won't post, only debug code 00

Aye...but at least I know for sure now that it's the boards as the cpu is brand new

What key are you pressing? Delete?
If it really doesn't work send your laptop in for repairs.

The system has rebooted without cleanly shutting down first. How to clear this error. Occurs frequently.

Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 31-12-2014 14:35:18
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: BLISS-ORACLE
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-12-31T09:05:18.479605300Z" />
<EventRecordID>9113</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>BLISS-ORACLE</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>

Hi,
I agree with Mr X. This should be a BSOD issue. Did you refer to Mr X’s suggestions and solve this issue?
Just addition, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Please refer to following articles
and check if can help you.
Crash dump analysis using the Windows debuggers (WinDbg)
How to read the small memory dump file that is created by Windows if a crash occurs
By the way, it may be not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer
Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

FATAL: Database "myDB" does not exist in the system catalog.

hi there everyone,
just having a problem to create a database in the system catalog.
i am a beginner to JDBC.
i have created a database by using ''create database myDB'' under cygwin (winXP).
but still getting the error.
so am i doing it right??
FATAL: Database "myDB" does not exist in the system catalog.
my java code
String url = "jdbc:postgresql://localhost:5432/myDB";
thx in advance

ok,,, i've solved the problem...
when i '' create database myDB'', it actually crreated ''mydb'' instand of ''myDB'', so myDB does not exist.
also need to connected to mydb not in template1..... stupid me.

XPower X58:the system stops at debug code CO or C0

Similar Messages

Maybe you are looking for