XPPro cant recognise airport express base station

Just bought a new computer and downgraded to XPPro. Installed Airport express from the disc, but there is no recognition of the base station. Using the network repair function produces an error stating that the IP address cant be recognised.....
How can I rectify this situation?

All AirPorts employ some form of heat sinks to allow heat to dissapate from their surfaces. Running "hot" is typical and not necessarily a sign that something is wrong or faulty with the base station. It is important to allow adequate space around them for proper cooling.

Similar Messages

  • I want to re-use my old airport express base station but airport utility doesn't recognise it anymore (it dates from 2005) i would like to use it to connect to my speakers only

    I have an old airport express base station from 2005
    I would like to have a network on it so i can put it upstairs in a room and connect my speakers to it so i can send my music (from itunes) over the airport to my speakers.
    I reset it and now i want to configure but the Airport utility doesn't recognise it anymore.
    Can i update the firmware? has it become useless because too old or what can i do?
    I work on macbook pro with macOSX 10.9.4
    Can someone give me some tips please
    thanks
    J

    Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
    The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

  • Airport Express Base Station and HP Laserjet 1020 printer connected

    Dear all,
    I have a Laptop (PC) Sony Vaio PCG-Z1XSP and an Airport Express Base Station which work perfectly together (internet access and I-tunes). I recently bought a printer HP Laserjet 1020 and connected it to the Airport Express USB soket. I managed to make it work and print a couple of times, but as soon as I turn off the printer or the computer or Airport Express, the next time I want to print, it doesn't work anymore.
    The Airport Admin Utility recognises the printer (I can see it listed). I have updated the Airport Express software to the Firmware version 6.3 as well as downloaded the latest driver available on HP's website for my printer. I've also substituted the USB cable. Can anybody help me here? Thank you very much and best regards.

    Hallo everybody,
    Thanks for all the answers. I have contacted HP's chat online and gone through the problem with 3 different technicians. I've tried a lot myself too. The issue was partially solved by restarting the printer spooler, i.e. stop, then start and then restart it.
    However after I was so happy that the printer worked, I turn off everything. When I turn on again, it was not working anymore. Then I tried to see by exclusion what the problem is, I had to restart the Hardwar I don't know how many times.
    Conclusion:
    1. The USB cable must be plugged into the airport express before turning on anything.
    2. Turn on the printer first.
    3. Turn on the airport express and the computer.
    4. If you try to print it doesn't work, even if you reset the airport express through the airport express utility software. The printer is recognized and appears in it though.
    5. Disconnect the USB cable from the airport express and connect it to the PC directly.
    6. Print a document.
    7. Disconnect the cable and reconnect it to the airport express.
    8. Now you should be able to print wireless. You may need to reset the airport expresst with the utility softwar, but I managed to print without having to do it.
    9. The pörinter works even if you turn off and on again the computer, or you suspend the windows session and restart it, or if you put it in standby and restart it.
    10. The printer works even if you turn off the airport express and the computer, or the airport express alone and restart them/it.
    11. The printer doens't work anymore if you turn it off and onn again. In such a case you have to plug in/out as discribeb above.
    Solution: Leave the printer always on, or make the plug in/out every morning when you start the computer and print one page direclty before being able to print wireless.
    Does anybody have a solution to this problem? I mean it prints, but it is annoying to plug in/out every day, no?
    HP's technician says that it is not a recommanded solution the HP Laserjet 1020 with the airport express, since the printer works on a host based server basis... I mean it is easy to say that, but one expects to buy a printer that works always and not to have to plug in/out everyday, restart spooler and so on.
    Can anybody comment or suggest anything I can do to avoid this? Thank you and I hope this helps others too.

  • HELP: Airport Express Base Station over PPPoE and Static IP

    Hi there,
    I recently purchased a Airport Express Base Station after doing some preliminary research as to wether it would work with my Windows XP Machine.
    After finally acquiring it today, I have been trying to set it up with ZERO luck so far.
    I open the neat package and plug in the wires as mentioned in the manual and get the AE on. I install the AE software from the CD, my computer recognises the wireless network, all going well.
    I setup the airport express using the setup assistant for windows and then open the Airport admin utility. Now here is where I come across the first stumbling block.
    My ISP provides each end user with LAN connectivity(primitive), what they do is install a router in every apartment complex and then provide internet through LAN connectivity to every apartment. In doing this they assign each users network adapter a static IP alongwith a lock-in for the MAC address for the specific adapter.
    So if you have to change network adapters you have to call them, they release the lock temporarily and you can connect using another adapter without issue.
    Another thing they also provide is a Username/password for every apartment user to be able to access the internet once connected. I am not a expert but I am guessing that is what they call PPPoE.
    Now I have been trying to setup my Airport Express using the admin utlity but I discovered that it is not possible to specify a Static IP and use PPPoE both together.
    How do i get this to work now? .. In addition I have a HP 1010 USB laserjet which I would like to share using my AE, I am guessing I can just create a TCPIP Port for this with the IP of the AE and it should work.
    Please help, really require to get this working ASAP with 3 windows machines (2 laptops and 1 desktop)
    Many thanks

    The Airport Admin utility internet TAB reads as follows
    Connect Using Ethernet
    Configure TCP/IP using Ethernet
    Configure Manually
    IP Address: 192.168.3.170
    Subnet Mask: 255.255.255.0
    Router Address: 192.168.1.1
    DNS Servers: blank
    blank
    Domain Name: Blank
    WAN Ethernet port: Automatic
    The Network Tab reads as follows
    Distribute IP Addresses [CHECKED]
    Share a Single IP Address (using DHCP & NAT) [CHECKED]
    Use 10.0.1.1/24 addressing [used option]
    No other options checked on this tab.
    The IPCONFIG reveals the following
    ===========================================================
    C:\Documents and Settings\TAPAN>ipconfig
    Windows IP Configuration
    Ethernet adapter Wireless Network Connection:
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 10.0.1.3
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 10.0.1.1
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . :
    IP Address. . . . . . . . . . . . : 192.168.3.170
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    ==========================================================
    Ethernet shows up here because I am using the internet on my computer directly right now.
    But the AE is connected and printer and Airtunes is working fine. It still flashes Amber though.
    Any other details you require to further analyse the problem? .. I have tried various combinations of basic IP settings. Resets to the AE, restarts to the Computer already. But I am willing to follow any additional instructions you might have for me and provide you any other information you might require.
    Many thanks, You should realise that your continuing support is very encouraging and means a lot to me.

  • I have two airport express base stations that I want to configure on two separate sets of speakers in two separate rooms. How do I do this? Airport Utility only seems to scan one express at a time.

    I am currently running a PowerPC G5 imac and have a wired broadband modem via ethernet with airport wireless network turned on, on the G5. I have the computer in the bedroom and have an airport express wired into a mixer that connects to my stereo. I have recently bought another airport express base station to connect to a pair of active monitors in the kitchen. When I try to scan these on Airport Utility version 5.42 I am only managing to scan one base unit at a time. I have plugged them in separately and reset them, they both have firmware updates, however the utility will only read one at once. I have read that you can link base stations to the same WDS. I would like to know how to go about doing this if it will only scan one airport express at a time. I have looked it up on the net and not found anything that is a simple fix. Can anyone help? In Apple Support it says that multiple Base Stations can be used. I would like to get both Apple Airport Express units to be able play airtunes separately or at the same time depending where I am in my flat. I do not need different music in each room. I would like to stream music from the computer to multiple rooms in the flat without having to continually unplug and configure the Base Stations. Has anyone come across such a challenge? Any help would be welcome. 

    How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
    To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    Launch the AirPort Utility.
    Select the AX.
    If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
    Wireless Security: None OR, if you are using security on your wireless network:
    Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
    Password: <enter your wireless network security password>
    Verify Password: <re-enter the same security password>
    Click Update to write the new settings to the AX.

  • Hey, I have a AirPort Express Base Station ( 2nd Generation ), and I wanted to ask that if I join my network at home with the Express Station, will it still run the 2.5 GHz and the 5.0 GHz?

    Okay, well I have just bought a AirPort Express Base Station ( 2nd Generation ) and I'm new to it, but I wanted to ask that if it join's a network you have setup at home, will it still run with the 2.4 GHz and the 5.0 GHz.

    The AirPort Express will "extend" both the 2.4 GHz and 5 GHz networks and provide more wireless signal coverage when it is connected to another Apple AirPort router and configured correctly.
    The AirPort Express cannot provide more wireless coverage though, if you are trying to connect it to another 3rd party wireless router using wireless only.
    It should be possible to set up the Express to provide more signal coverage if you connect it back to the main router using a wired Ethernet connection or using Ethernet powerline adapters.

  • Can you add new AirPort Express Base Station Simultaneous dual-band 802.11n with a 1st Gen time capsule network

    Hi
    Has anyone tried using the AirPort Express Base Station with a first generation Time Capsule and used it to extend their network, while still being able to use the Simultaneous dual-band 802.11n on their network?
    Thanks in advance

    The first generation Time Capsule was not a simultaneous dual band device.
    If you add the "new" AirPort Express to the network and configure it to "Extend a wireless network", it will extend the one single band signal that it is receiving from the Time Capsule.
    In other words, the AirPort Express will not extend simultaneous dual bands in this type of setup...since it can only "extend" what it receives. You would need a simultaneous dual band Time Capsule if you want that type of functionality.

  • Airport Express Base Station no longer detectable by my computer

    Ever since I went wireless last year, I have had a love-hate relationship with my Airport Express Base Station. It seems to take forever and a day to configure the sucker, then, somehow I do and it works well for several months - until something happens to muck up the works. That thing seems to have happened this morning when Earthlink's DSL connection got wonky (it was a glitch that apparently covered a large part of the country). That glitch apparently worked itself out, but after I put my MacBook to sleep in order to get lunch, suddenly my PPPoE host went missing when I woke the machine up. Further examination indicated that, although my wireless network was still there, the MacBook could no longer find my Base Station, even though the light was still working. Resetting the Base Station does not help. I am at my wit's end here. I can work via Ethernet DSL line, but I have become used to wireless, and without a viable network, my Mac mini can't connect to the Internet. Help!

    Could you post what you did in order to resolve the issue. I'm having a problem with the base station in that I cannot connect to the internet with my laptops (a mac and pc) while I can connect wirelessly to my network with my desktop (G4). The base station is not detected in the base statin admin utility or the aiport setup utility. If anyone else has a solution I would be much obliged to read it.
    Thanks!

  • Can't read airport express base station configuration wirelessly

    The setup:
    2TB time capsule that takes the ethernet feed from the cable modem for internet access.
    Airport express 802.11g plugged into speakers for Airtunes. No ethernet connection, just a wireless network.
    The problem:
    I can only read the airport express base station configuration when the mac is plugged into the time capsule by ethernet cable. This does not happen with the other mac I have on the network. It can connect to both the time capsule and the airport express without any problems. So unless I'm plugged in, iTunes and airtunes doesn't connect to the base station, and neither can Airfoil 3.5 or Airport Utility. Airport Utility does see the airport express. It just doesn't read the configuration wirelessly.
    I think this had something to do with elgato eyetv not liking airfoil, but I can't say for sure.
    Any thoughts?

    When I switch it on all three lights flash, but then after a while the middle one stays on and nothing happens.
    You posted in the AirPort Express area, but it sounds like you have an AirPort Extreme Base Station (AEBS)--correct?
    If so, let's start by performing a complete power recycling of your network components to make sure that the BT Voyager router "recognizes" the AEBS.
    Modem/Router Power Recycling - Quick
    - Power-off the BT Voyager modem, AEBS, & computer(s); Wait at least 5 minutes.
    - Power-on the BT Voyager modem; Wait at least 5 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    - Power-off the BT Voyager modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    - Power-on the BT Voyager modem; Wait at least 30 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)

  • I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.

    I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.
    How do I fix this

    If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
    Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

  • Airport Utility can no longer see my Airport Express Base Station.

    Hi all the problem I have is as follows;
    I've set up my Airport Express Base Station some time ago to print wirelessly from my HP Photosmart C4280 and it was working fine.
    However recently when I've gone to print a document, even though the printer is working fine and the Airport Express Base Station is showing a green light nothing happens. I've gone into the Airport Utility and its say's it can't see the Airport Express Base Station (even though it still has a green light showing). If I unplug the Airport Express and plug it in again, the Airport Utility can suddenly see it again.
    I've successfully gone through the reset process but after a few minutes the Airport Utility can no longer see the Airport Express Base Station which means I can't print a document wirelessly. I've repeated the reset process several times with the same outcome.
    Everything was working fine up until recently, has the Airport Express Base Station developed a fault? or is there something I'm not doing.
    Any advice would be greatly appreciated.

    If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
    Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

  • After downloading firmware for airport utility, airport express base station no longer registers with airport utility on my Mac. Now the base station is blinking amber with no info of what is causing all this to happen. Any suggestions?

    After downloading firmware for airport utility last night, airport express base station was deleted from airport utility and only Time Capsule remains. When I plug in the base station, an amber light blinks without being able to verify the cause. Any suggestions to remedy this problem?

    There are only a couple of things you can do to resuscitate a nonresponsive Express:
    "Hard reset":
    Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
    If that does not work,
    "Factory defaults reset":
    Unplug the Express from power.
    Press and hold the reset button with a pen or pencil, then plug the Express back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
    Release the button.
    In either case you will have to reconfigure the Express as a new device. A moment or two after it has been reset, the LED should be blinking slowly. It must then appear in your Wi-Fi menu like this:
    Earlier versions of OS X will report it as "Apple Network nnnnnn".
    In either case, select it, and then launch AirPort Utility.
    If it does no appear in your Wi-Fi menu after it has been reset using one of the two techniques above, it is defective. Other than attempting another reset, there is nothing you can do.

  • I want to set up my Airport Express Base Station again but do not remember how. Please walk me thru it.

    I am trying to hook my Airport Express Base Station up to be a router again and have forgotten how to do this. Before I had it hooked through the modeum and would like to have it that way again but for some reason the process has completely left my memory. I know it has something to do with the little icon on the top of the computer but not what it has to do with it. Because it is not hooked up I am unable to get my printer to work unless I connect to another wireless that I have but do not want to use all of the time since I have to pay for it and do not have  many GB. I am also paying for another that I want to use all of the time (unless necessary to use the other) so It only cost me when I am away from home. Please walk me through the process of hooking the Apple router back up.

    All apple routers are setup via Airport Utility.. there is no icon for it in the top menu area.. I think you are confusing the airport network setup (ie the internal wireless card in the Mac) with the airport express setup.. Apple insist on calling everything the same name which makes it more confusing.
    Open the airport utility which you find under applications/utilties.
    Router setting will depend on what version of the utility you are using.
    In version 5 it is under Internet tab and in v6 utility under network. You need to set it to DHCP + NAT.
    Download and read the manual for setting up the express if you have forgotten the details.. manuals are always good.. all the manuals are listed at the head of the section. But you are in Time Capsule instead of extreme/express specific area.
    https://discussions.apple.com/community/wireless/airport
    Manuals link http://support.apple.com/manuals/%23airport
    If you want the express as router the modem should be bridged or it should be a pure modem for it to work without Double NAT issues. There is nothing wrong with bridging the Express.. that is not the same as using it in wireless bridge modes.. that is router bridge.
    What modem do you have?
    I am at a loss to understand the rest.. why the printer is not part of your own network.. and how setting up the airport this way is important. You need to give us specific details if you need more help.
    How exactly is the airport setup now?
    How do you connect to the modem?
    How is the printer connected? What kind of printer?

  • If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    If I already have an Airport Express Base Station, can i hook an external hard drive into it's USB port and use that hard drive with Time Machine?

    No, and that shouldn't be done with an AirPort Extreme or Time Capsule.
    (66017)

  • 1st generation airport express base station not showing up in network utilities

    when i plug it in the amber light appears and sometimes blinks and/or sometimes steady. needless to say my desktop imac is not picking up its signal. what do i need to do to make it work or is it just not compatible with  my new mac?

    Your new iMac should not have any issues connecting to the 1st generation AirPort Express Base Station (AX).
    When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
    Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
    Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
    Perform a "factory default" reset on the base station.

Maybe you are looking for

  • My macbook built-in webcam has died 2 times since I have owned it. Any ideas?

    I got the macbook in 2010. It was the last year they made the white macbook (that I can tell). Since then I have had the webcam die on me twice. The first time it was under the apple care plan and I took it back they replaced screen/unit. Less than a

  • How to use Callout in B2B on the basis of STATUS

    Hi, If there occurs a validation error in the B2B EDI contents, what mechanism can be used to update that status back to the source system? We are using B2B Adapter in the BPEL Process to pass the XML file and B2B generates an EDI file for us. Now, i

  • Not showing recent movie i rent today but older rentals is.

    i recently rented a movie, it downloaded fine and i see it on my computer but it not showing up in the apple tv rentals!

  • Export Reports 3.0 output to excel?

    Any one please... is it possible to export reports 3.0 output to excel? I dont want to upgrade to 10g or 11i now as my current version(forms 5.0 and reports3.0) is running smooth even on windows 7. thanks!

  • Bevel Filter from Illustrator ?

    Hello all Happy to be among the first to use this forum I did a UI design on Photoshop with a lot of Bevel effects. After having realized that Catalyst better imports Illustrator layers, I decided to start over my design on Illustrator. However, I di