XPRAS_UPG Error Messages

Dear All,
While performing an upgrade from 4.6c to ECC6.0. I have received 10 errors in the XPRAS_UPG Phases.
As per the upgrade guide I following to find the name of the error messages
as SAPK700ZG2 and checked the error message in SE09.
Transport Logs:
5 SAPK700ZG2 Rel. 700 AFTER_IMP objects: SOBJ/PDWS
5 DV2 DV2 - HPUX System
Import 12/17/2007 19:55:20 (0) Successfully Completed
 5 Method Execution 12/17/2007 21:28:56 (8) Ended with errors
12/17/2007 20:43:05 (8) Ended with errors
 12/17/2007 21:28:56 (8) Ended with errors
4 Import steps not specific to transport request
When I clicked on the long text for the above error message it gives the general help.
Execution of programs after import (XPRA)
Transport request : SAPK700ZG2
System : DV2
tp path : /usr/sap/DV2/SYS/exe/run/tp
Version and release: 372.03.35 700
Execution of programs after import (XPRA)
End date and time : 20071217212856
Ended with return code: ===> 8 <===
Can anyone help to solve this issue.
I am enclosing the error file XPRASUPG.ELG:
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR700ZG2.DV2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EEOL555 Object type '"BUS20370"' could not be generated
Long text:
 Cause
 The object type could not be activated.
 What to do
 Select the function 'Check' in the object type and correct the error
 found. Then try to activate the object type again.
2EEOL555 Object type '"BUS20350"' could not be generated
Long text: see above
2EEOL555 Object type '"BUS20310"' could not be generated
Long text: see above
2EEOL555 Object type '"BUS20300"' could not be generated
Long text: see above
2EEOL555 Object type '"BUS20310"' could not be generated
Long text: see above
2EEOL555 Object type '"BUS20360"' could not be generated
Long text: see above
2EEPU133 Errors occurred during post-handling "SWO_OBJTYPE_AFTER_IMPORT" for "SOBJ" "L"
Long text:
 Cause
 During the upgrade, import post-processing &V#& was performed for
 object &V#& &V#&. Errors were reported.
 System Response
 The upgrade is interrupted.
 What to do
 You will find the error messages for post-processing &V#& directly
 before this message. First read these error messages and the respective
 long texts. You will find further information there on correcting the
 errors.
 If this information is not sufficient, look for error notes in the
 SAPNet - R/3 Front End. Keywords you can use for the search are
 the name of post-processing &V#& or
 the message numbers of the preceding error messages. The message number
 appears in the header of the long text display.
 If you enter a problem message for the error, enter the following
 information:
 the name of post-processing &V#&
 the message numbers of the preceding error messages
 the components in which the error occurred
2EEPU136 The errors affect the following components:
Long text:
 Cause
 During the upgrade or import of a transport request, errors occurred
 which affect particular components of the SAP System.
 The following messages list the components in which the errors
 occurred.
 System Response
 The upgrade or import of the transport request is interrupted.
 What to do
 Read the preceding error messages and their long texts for more
 information on correcting the errors.
2EEPU137 "BC-DWB-TOO-BOB" ("Business Object Builder")
Long text:
 Cause
 During the upgrade or import of a transport request, errors occurred in
 the component
 the component
 &V#& (&V#&).
 System Response
 The upgrade or import of the transport request is interrupted.
 What to do
 Read the preceding error messages and their long texts for more
 information on correcting the errors.
1 ETP111 exit code : "8"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR-60007INFICA.DV2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "0"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPRGPGD07.DV2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "0"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR-60007INISUT.DV2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "0"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR-60007ININSURANC.DV2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 ETP111 exit code : "0"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
XPRA ERRORS and RETURN CODE in SAPR-60007INFICAX.DV2
so on.
The error message doesn't give enough information neither the upgrade guide. Can anyone help me to overcome this error.
Thanks & Regards
Senthil

The basic problem here is that the affected SWO1 objects depend on an Enhancement Spot containing a type group which is in-active and therefore not available for generation from SWO1.
You have to activate the type group concerned.
The following process should achieve activation of the SWO1 objects:
1. TCODE: SE18
Display PLM_AUDIT_LIST_ITEM in enhancement spot.
Activate this object.
2. TCODE SE80
Package: PLM_AUDIT
Find the PLM_BUS203* function groups and activate them. (same as generating from SWO1)
You might want to try step 2 first, and only activate the object in step 1 if Step 2 fails.
Hope this helps others who will prefer to fix rather than ignore this error.
Best Regards
Andre Rainsford-Alberts

Similar Messages

Upgrade with XPRA ERRORS message at xpras_upg

Hi,all
 I am upgrading sap ERP 4.72 (win2Ksql2K_sp3) to ECC6(win2003sql2K+sp4). Prepare is sucess.When the upgrade process is running xpras_upg,I got error message below.
XPRA ERRORS and RETURN CODE in SAPR700ZE1.PRD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A2EESMMSS_ANALYZE 000 SQL error "446": "Cannot resolve collation conflict for concatenatio" "n operation." " "
2EEPU133 Errors occurred during post-handling "MSS_SDBP_AFTER_IMP" for "SDBP" "L"
Long text:
 Cause
 During the upgrade, import post-processing &V#& was performed for
 object &V#& &V#&. Errors were reported.
 System Response
 The upgrade is interrupted.
 What to do
 You will find the error messages for post-processing &V#& directly
 before this message. First read these error messages and the respective
 long texts. You will find further information there on correcting the
 errors.
 If this information is not sufficient, look for error notes in the
 SAPNet - R/3 Front End. Keywords you can use for the search are
 the name of post-processing &V#& or
 the message numbers of the preceding error messages. The message number
 appears in the header of the long text display.
 If you enter a problem message for the error, enter the following
 information:
 the name of post-processing &V#&
 the message numbers of the preceding error messages
 the components in which the error occurred
2EEPU136 The errors affect the following components:
Long text:
 Cause
 During the upgrade or import of a transport request, errors occurred
 which affect particular components of the SAP System.
 The following messages list the components in which the errors
 occurred.
 System Response
 The upgrade or import of the transport request is interrupted.
 What to do
 Read the preceding error messages and their long texts for more
 information on correcting the errors.
2EEPU137 "BC-DB-MSS" ("Microsoft SQL Server")
Long text:
 Cause
 During the upgrade or import of a transport request, errors occurred in
 the component
 "BC-DB-MSS" ("Microsoft SQL Server").
 System Response
 The upgrade or import of the transport request is interrupted.
 What to do
 Read the preceding error messages and their long texts for more
 information on correcting the errors.
1 ETP111 exit code : "8"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above <<<
I have searched in sap notes and SDN,but no help to me.
Can give me solution?
Thanks a lot.

Sorry,I have solved this problem.
The version of my sql is sql2k with sp3 before,but sp3 only support CP850_BIN. After sp3,microsoft support CP850_BIN2 and BIN.
The default installation of the sql2k sp4 software from sap is supported CP850_BIN2 .
So,the versionof the sql server is BIN,and database is BIN in my ERP 4.72. Then I install sql2k with sp4 with BIN2,and database is BIN.
I must change the BIN&BIN2 with instcoll.exe.
More information,please read note 505906,600027.
Thanks.
Wensent Lee

XPRAS_UPG errors

Hi;
We are trying to uprade from 4.6C to EHP4 SR1. When we are in XPRAS_UPG
phase, upgrade gives the errors below:
LIST OF ERRORS AND RETURN CODES *******
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPR-603DWINEAAPPL.FKQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~2EENR397CThe subobject value table "TCACS_APPLDEF" contains invalid key
fields
2EENR893INumber range object "CRD_AS_ID" " "
2EEPU133 Errors occurred during post-handling "AFTER_IMP_NROB"
for "NROB" "L"
Long text:
Cause
During the upgrade, import post-processing &V#& was performed for
object &V#& &V#&. Errors were reported.
System Response
The upgrade is interrupted.
What to do
You will find the error messages for post-processing &V#& directly before this message. First read these error messages and the
respective
long texts. You will find further information there on correcting
the
errors.
If this information is not sufficient, look for error notes in the SAPNet - R/3 Front End. Keywords you can use for the search are
the name of post-processing &V#& or
the message numbers of the preceding error messages. The message
number
appears in the header of the long text display.
If you enter a problem message for the error, enter the following
information:
the name of post-processing &V#&
the message numbers of the preceding error messages
the components in which the error occurred
2EEPU136 The errors affect the following components:
Long text:
Cause
During the upgrade or import of a transport request, errors
occurred
which affect particular components of the SAP System.
The following messages list the components in which the errors
occurred.
System Response
The upgrade or import of the transport request is interrupted.
What to do
Read the preceding error messages and their long texts for more
information on correcting the errors.
2EEPU137 "BC-SRV-NUM" ("Number Range Management")
Long text:
Cause
During the upgrade or import of a transport request, errors
occurred in
the component
&V#& (&V#&).
System Response
The upgrade or import of the transport request is interrupted.
What to do
Read the preceding error messages and their long texts for more
information on correcting the errors.
1 ETP111 exit code : "8"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED
ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132
above <<<
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPR-604DWINEAAPPL.FKQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~2EENR397CThe subobject value table "TCACS_APPLDEF" contains invalid key
fields
2EENR893INumber range object "CRD_AS_ID" " "
2EEPU133 Errors occurred during post-handling "AFTER_IMP_NROB"
for "NROB" "L"
Long text: see above
2EEPU136 The errors affect the following components:
Long text: see above
2EEPU137 "BC-SRV-NUM" ("Number Range Management")
Long text: see above
1 ETP111 exit code : "8"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED
ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132
above <<<
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPR-604DWINSAPHR.FKQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~2EENR397HThe subobject value table "T591A" contains invalid key fields
2EENR893INumber range object "HR_ZA_LABR" " "
2EEPU133 Errors occurred during post-handling "AFTER_IMP_NROB"
for "NROB" "L"
Long text: see above
2EEPU136 The errors affect the following components:
Long text: see above
2EEPU137 "BC-SRV-NUM" ("Number Range Management")
Long text: see above
1 ETP111 exit code : "8"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED
ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132
above <<<
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPR701WG3.FKQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~2EENR397FThe subobject value table "TFK_NUMGR_IT" contains invalid key
fields
2EENR893INumber range object "FKKEXBL_IT" " "
2EENR397HThe subobject value table "T591A" contains invalid key fields
2EENR893INumber range object "HR_ZA_LABR" " "
2EEPU133 Errors occurred during post-handling "AFTER_IMP_NROB"
for "NROB" "L"
Long text: see above
2EEPU136 The errors affect the following components:
Long text: see above
2EEPU137 "BC-SRV-NUM" ("Number Range Management")
Long text: see above
1 ETP111 exit code : "8"
>>> PLEASE READ THE REPORT DOCUMENTATION OF THE REPORTS MENTIONED
ABOVE <<<
XPRAs are application reports that run at the end of an upgrade.
Most XPRA reports have a report documentation that explains what
the report does and how errors can be corrected.
Call transaction se38 in the SAP system, enter the report name,
select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132
above <<<
Best regards
Noyan

Hello Noyan,
Please refer to note '1484591 - NK: Error message NR 397 after import'
and check whether it helps you.
Please apply the note 1484591 manually
as it is not possible to use SNOTE during upgrade.
Make sure the Req. Corr. Instructions from note
'1467470 - NR: Check of subobject value table'
are also implemented if not done yet.
In order to apply the note manually (as SNOTE is blocked due to the
upgrade), you need to unlock the system:
1. In order to unlock the system, you must execute these commands:
/usr/sap/<SID>/SYS/exe/run/tp pf=<EHPI directory>/
abap/bin/DEFAULT.TPP unlocksys <SID>
/usr/sap/<SID>/SYS/exe/run/tp pf=<EHPI directory>/
abap/bin/DEFAULT.TPP unlock_eu <SID>
2. Now you should be able to logon into the system with a user
different from DDIC.
3. Apply the note's changes manually. Please take into account the
note's prerequisites' corrections from note 1467470 have to be
applied also.
4. Lock the system with the following commands:
 tp locksys <SAPSID> pf=<transport profile>
 tp lock_eu <SAPSID> pf=<transport profile>
5. Repeat the failing phase.
Regards,
Paul

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

Error message into a Variable.

Dear users,
I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
My requirement is like this:
I have a message class in which I want to define a text 'Employee number & not found'.
I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
lv_text = e0xx(messageclass) USING '1234' which stores the text 'Employee number 1234 not found' in lv_text.
How would I acheive it??
Thanks, V!

Try tis way
message e999(00) with i_emp-empno into lv_text.
press f1 in message will provide you more details
a®

IPod seen by windows, not by iTunes+ weird error message

I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10x

I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ...

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

IPod Touch will no longer sync...error message.

For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone?

What is the exact wording of the error message?

Error Message: Need to purge Cache in Adobe Bridge CC (on PC)

I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive. The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache. There are 4 files in there that are taking up 124 GB! Can I simply delete these files or will it corrupt my regular files? I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.

Yes, you can delete the cache files manually, Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches. Depending on your files, that can take a few minutes or several hours.
A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.

Error message when installing Photoshop CS2 in Windows 8

I just upgraded to a computer with Windows 8. I use Photoshop CS2. I am getting the error message below when starting photoshop after installation. I changed program folders, but that did not work. Please advise.
Error: an error has been detected and activation cannot continue. Please restart your computer and reinstall application.

http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
HELP!

Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
--Ryan

Upload Error message: HTTPS protocol is not supported

Hi,
   Whenever I do a quick par upload i'm getting an 'Operation failed' message to check sap-plugin.log.
   Log says
Upload Error message: HTTPS protocol is not supported, please ensure this server is not using HTTPS. My webdynpro applications are getting deployed without any issues.
     How to resolve this?
Thanks
Sumathi

Hi Sumathi,
As there are often problems with the Quick PAR Upload reported, I would suggest to use the "normal" PAR upload from the icon tray (you have to activate the portal icons in the icon tray). That is almost that "quick" (one or two clicks more needed, we don't talk about more than a second) and - it works (it least it should, and at least it works in most cases even if the Quick PAR Upload fails).
Hope it helps
Detlev

Custom error message in SAP application log

Is there a way to add a custom error message to the SAP application log without passing the message variables MSGV1, MSGV2, MSGV3, MSGV4 and the Message class and number.
We want to pass a custom message from the BAPIRET2-MESSAGE without giving it a Message class and number. The reason for this is that we are using class based exceptions instead of the traditional message class with errors. When we catch the class based exception, we take the error text of the exception and put in in the BAPIRET2-message and set the BAPIRET2-TYPE as 'E'. Now we want to add this to the SAP application log.
The call to 'BAL_LOG_MSG_ADD' takes a structure BAL_S_MSG which is just like BAPIRET2. However this function builds the entry to the application log use the message variables MSGV1, MSGV2, MSGV3, MSGV4. There is no provision to pass in the BAPIRET2 message.
Add message to application log
CALL FUNCTION 'BAL_LOG_MSG_ADD'
 EXPORTING
 i_log_handle = app_log_handle
 i_s_msg = log_message
Thanks,
Jay

Hi Jay,
Did you see BAL_LOG_EXCEPTION_ADD?
This FM is represented by the structure BAL_S_EXC. This can have various versions as described below:
Data of BAL_S_EXC Structure / Use
EXCEPTION / Exception class from which an exception text
 is added to the log. This field must be filled.
MSGTY / Message type (MSGTY) of a T100 message.
 This field must also be filled for exceptions.
PROBCLASS,
DETLEVEL,
ALSORT, TIME_STMP / Message or exception attributes, such as
 problem class (PROBCLASS, for
 example, "very important"), level of detail
 (DETLEVEL, from 1 to 9), sort criterion
 (ALSORT, unrestricted) and timestamp
 (TIME_STMP). These fields can be displayed
 in the log (except TIME_STMP).
MSG_COUNT / This attribute is not used for exceptions.
Follow the link below for more details:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/d6/5d7f38f52f923ae10000009b38f8cf/frameset.htm">SAP Help DOc</a>
Hope this helps.
Thanks
Sanjeev

XPRAS_UPG Error Messages

Similar Messages

Maybe you are looking for