Xraid Arrays gone after reboot

Hello,
I just inherited an XRaid. We have two XServes (10.3), XServe A is the main metadata controller, XServe B is backup.
The previous showed me it was working with XServe A, then did the following:
- Took off disk 2
- Took off disk 6
- Returned disk 2
- Returned disk 6
- Disconnected the two fiber cables of the top controller of the XRaid (where all 6 disks are) from XServe A and connected them to XServe B.
- Restarted XServe B.
- The array showed as offline on XRaid Admin.
- Performed Parity check. All good.
- Restarted XRaid.
After restart neither XServe sees the XRaid volumen. Now the XRaid Admin shows all components in green, including disks but zero arrays.
What would you recommend?
Putting the cables on the original Xserve?
Restart everything?
Change the bottom controller?
Forget about it.
Please help.
Francisco
The log.
     Upper Controller     09/06/05 08:26:04 AM     RAID Controller 1 Online
     Upper Controller     09/06/05 08:26:02 AM     Disk 6 Online
     Upper Controller     09/06/05 08:26:02 AM     Disk 5 Online
     Upper Controller     09/06/05 08:26:02 AM     Disk 3 Online
     Upper Controller     09/06/05 08:26:02 AM     Disk 1 Online
Warning     Upper Controller     09/06/05 08:26:02 AM     RAID Controller 1 Fibre LIP
     Upper Controller     09/06/05 08:26:02 AM     RAID Controller 1 Fibre Link Up
     Upper Controller     09/06/05 08:26:01 AM     Disk 4 Online
     Upper Controller     09/06/05 08:26:01 AM     Disk 2 Online
     Lower Controller     09/06/05 08:25:37 AM     RAID Controller 2 Online
Warning     Lower Controller     09/06/05 08:25:36 AM     RAID Controller 2 Fibre LIP
     Lower Controller     09/06/05 08:25:36 AM     RAID Controller 2 Fibre Link Up
     Upper Controller     09/06/05 08:25:32 AM     Enclosure Powered On
     Lower Controller     09/06/05 08:25:26 AM     Enclosure Powered On
     Upper Controller     09/06/05 08:24:48 AM     Enclosure Powered Off
     Upper Controller     09/06/05 08:24:46 AM     RAID Controller 1 Offline
Warning     Upper Controller     09/06/05 08:24:46 AM     RAID Controller 1 Fibre Link Down
     Lower Controller     09/06/05 08:24:44 AM     Enclosure Powered Off
     Lower Controller     09/06/05 08:24:42 AM     RAID Controller 2 Offline
Warning     Lower Controller     09/06/05 08:24:42 AM     RAID Controller 2 Fibre Link Down
     Upper Controller     09/05/05 09:33:39 PM     RAID Set 1 Verify Complete (0)
     Upper Controller     09/05/05 09:33:56 AM     RAID Set 1 Verify Started
Warning     Upper Controller     09/01/05 08:00:23 AM     RAID Controller 1 Fibre LIP
     Upper Controller     09/01/05 08:00:23 AM     RAID Controller 1 Fibre Link Up
Warning     Lower Controller     09/01/05 08:00:23 AM     RAID Controller 2 Fibre LIP
     Lower Controller     09/01/05 08:00:23 AM     RAID Controller 2 Fibre Link Up
Warning     Upper Controller     09/01/05 07:51:07 AM     RAID Controller 1 Fibre Link Down
Warning     Lower Controller     09/01/05 07:51:07 AM     RAID Controller 2 Fibre Link Down
     Upper Controller     09/01/05 06:36:18 AM     Disk 2 Online
     Upper Controller     09/01/05 06:36:13 AM     Disk 6 Online
     Upper Controller     09/01/05 06:35:30 AM     Error Status Cleared Using Service ID Button
     Upper Controller     09/01/05 06:35:28 AM     Disk 2 Offline
     Upper Controller     09/01/05 06:35:28 AM     Email Notification Sent (0)
     Upper Controller     09/01/05 06:35:25 AM     Error Status Cleared Using Service ID Button
     Upper Controller     09/01/05 06:35:21 AM     Disk 6 Offline
     Upper Controller     09/01/05 06:35:21 AM     Email Notification Sent (0)
Warning     Upper Controller     08/31/05 04:14:08 PM     RAID Controller 1 Fibre LIP
     Upper Controller     08/31/05 04:14:08 PM     RAID Controller 1 Fibre Link Up
Warning     Upper Controller     08/31/05 04:14:02 PM     RAID Controller 1 Fibre Link Down
Warning     Upper Controller     08/31/05 04:14:01 PM     RAID Controller 1 Fibre LIP
     Upper Controller     08/31/05 04:14:01 PM     RAID Controller 1 Fibre Link Up
Warning     Upper Controller     08/31/05 04:14:00 PM     RAID Controller 1 Fibre Link Down
Warning     Upper Controller     08/31/05 04:13:59 PM     RAID Controller 1 Fibre LIP
     Upper Controller     08/31/05 04:13:59 PM     RAID Controller 1 Fibre Link Up
Warning     Upper Controller     08/31/05 04:13:55 PM     RAID Controller 1 Fibre LIP
     Upper Controll

So this is an XSAN environment with two MDC (METADATA CONTROLLER)
Xserve A and Xserve B
DO YOU HAVE ANY ARRAYS CREATED BEFORE?
ALTHOUGH RAID ADMIN DOES NOT SEE THE RAID ARRAY, CAN THE OS SEES IT?
YOU CAN RUN SYSTEM PROFILER (ABOUT THIS MAC, MORE INFO, CLICK ON HARDWARE, FIBRE CHANNEL) to see if the OS sees it.
- THE HARDWARE HAS TO SEE THE LUNS (RAID ARRAYS IN THIS CASE), IN ORDER TO PASS INFO TO PASS ON TO DISKUTILITY OR XSAN.
IS THERE AN ACTIVE XSAN VOLUME?
- /Library/Filesystems/XSAN/BIN
WAS THE RAID ARRAY (OR RAIDSET) FORMATED WITH XSAN VOLUME?
WHAT VERSION OF RAID ADMIN ARE YOU USING?
- THE LATEST IS 1.32/1.26 FIRMWARE, 1.33 RAID ADMIN
ANY REASON WHY YOU DID A PARITY CHECK IN RAID ADMIN?
- THIS PROCESS SHOULD BE NON DESCTRUCTIVE TO DATA. IF THERE ARE BUGS, contact APPLECARE.

Similar Messages

User blogs "gone" after reboot

On 10.5.1 server, I had three users (myself included) that had started blogs.
On a reboot of the server, then re-surfing to the page, I get "no available users".
However, If I type in a name, the blog entries exist.
Note: I'm using Active Directory (AD)...
Any help?
Thanks,
Andrew

Little tip that might help. I was having the same problem with "no available users", even though I had successfully created a user blog and was able to access it directly via the /users/name manually entered URL.
I went into the Server Admin, selected the site, select the WebService tab, uncheck Blog, hit Save, check Blog again and hit save.
After that, the users start showing up, and new additions are getting added to the list without any problems. Go figure.
I'm guessing that there's an initialisation routine that reads the contents of the directory containing the user blogs, and turning the service off and on, it rereads the contents and gets itself back on track.

UWC calendar tab gone after reboot

Hi
I have JES3 ds+msg+cal+web+am installed on a single host. UWC (mail+cal+addressbook) worked fine until recent reboot. Now calendar tab is missing. UWC log file has these entries:
May 30, 2005 11:34:16 PM com.sun.uwc.common.auth.IdentitySSOAuthFilter doFilter
INFO: 15. settting mail as true
May 30, 2005 11:34:16 PM com.sun.uwc.common.auth.IdentitySSOAuthFilter doFilter
INFO: 16. settting cal as false
Thanks,
D.

This is fixed.
Bug id 6223252. Domain icsStatus gets set to inactive.
Fixed by patch 118210-23.
Thanks goes to Maggie Lee.
D.

Cookies missing after reboot

I'm running windows XP and lately all cookies were deleted every time I reboot my computer. All cookies, and default settings are gone after reboot, I even switched back to IE8 and same issue noted on both IE8 and Firefox 3.6.12

Again and again!!!I reformatted my usb drive and created a brand new safepoint.
everyting was ok but two days after, the system has rebooted (no warning and I don't know why) and my Safepoints are missing in the dashboard.
Obviosly in the WDMyCloud desktop app the SP are visible... Frustating! :-(

IPFW losing rules after reboot

I am trying to block port 137 UDP and TCP and after I reboot the rules are gone. I run the following commands:
sudo ipfw add 1 deny tcp from any to any 137 out
sudo ipfw add 2 deny udp from any to any 137 out
Before a reboot I run sudo ipfw list and things look great.....reboot and run it again and I just see the default rule.
Probably a stupid question, but I can't find the answer anywhere and I am a noob with ipfw. And Leopard just mixes the whole process up as well with ipfw and its new application firewall.
So I guess my questions are: Why do the rules disappear? How do I get the rules to stay?
Thanks,
Dan

Hi
It sounds like you need to configure a startup script without a startup script when you reboot your computer- the computer "forgets" the ipfw rules
You can google the search terms : "ipfw startup script " "launch daemons ipfw " " ipfw rules gone after reboot" "shell script launch firewall rules ipfw" "ipfw startup plist " -OR-
You can use WATERROOF waterroof is a free application that will help you configure your ipfw rules waterroof will also install a startup script and a startup plist on your hard drive
Check out this link to the waterroof website
http://www.hanynet.com/waterroof/
Hope This Helps

After iOS 8 upgrade keyboard shortcuts gone, just reboot

FYI,
apparently this also happened with the ios7 upgrade. Per the related ios7 thread, after a manual reboot of the phone, the shortcuts reappeared. The reboot solved my problem as my keyboard shortcut settings reappeared after reboot.

I lost all my keyboard shortcuts on my iPhone 5s after upgrading to iOS 8. They still showed up on my iPad Air (iOS 8) and iMac (10.9.5). There were, however, massive sync problems, sometimes they would only flow from one device to all the others, sometimes from one device to only one of the other two, sometimes not at all.
I deleted all my shortcuts and started from scratch, deleting “~/Library/Application Support/Ubiquity”, ~/Library/Dictionaries” and “~/Library/Mobile Documents/com~apple~TextInput” from the iMac and KeyboardDomain from my iOS devices.
Rebooted everything a dozen times.
Toggled Documents & Data Sync off and on a dozen times too in all kinds of combination with rebooting and deleting the aforementioned files.
Everything always starts working and syncing fine for a very short while, but sooner or later one of my devices stops receiving new shortcuts as I re-add them.
I reboot that device and it catches up. I enter new shortcuts, and that device doesn’t get any new shortcuts. This time, a reboot doesn’t fix anything.
After using my devices for a while, I notice shortcuts are entirely gone from both the iPhone and iPad, but not from the iMac.
I even upgraded my iPhone 5s to a 6, and right off the bat it had issues with keyboard shortcut sync. I also setup my iPad as new, and same thing: right off the bat, sync issues with keyboard shortcuts.

Ip address gone after evrey reboot.

I have already installed my via NIC card in the Sun Solaris10. But now also facing a new funny problem.
The ip address that i have configured in the ethernet interface is gone after rebbot. i want to make it permanent.
1) My ethernet interface name is vfe0
2) The README.txt in the driver bundle of my NIC is suggesting me to edit the file /etc/hostname.vfe0 to fix the IP address.
3) My hostname is sun1 but i cant see any file name /etc/sun1.vfe0
4) if u use the commands
ifconfig vfe0 193.1.1.1 netmask 255.255.255.0 up
ifconfig vfe0 plumb
then i can ping my host. And even see the interface by the commandifconfig -a
But not after reboot.
Please help me to solve it.
Masud from Bangladesh

I have configured my ethernet interface successfully.
And now it is available after reboot.But a little problem with ip addres still.
Its showing an error message during boot. "interface vfe0 cannot be configured (IP_V4)"
My desired configuraton is....
Host name : sun1
ip : 196.1.1.1 255.255.255.0
Domain : mylan.org
FQDN : sun1.mylan.org
So that i have mentioned some important files output of my system below
1) /etc/hostname.vfe0
sun1
2) /etc/hosts
127.0.0.1 localhost loghost sun1
196.1.1.1 sun1
3) /etc/networks
loopback 127
arpanet 10 arpa # Historical
mylan 196.1.1 vfe
4) /etc/netmasks
196.1.1..0 255.255.255.0
5) /etc/inetd/ipnodes
::1 localhost loghost sun1
127.0.0.0 localhost loghost sun1
196.1.1.1 sun1
The output of the ifconfig
# ifconifg -a
lo0: flags=2001000849< UP, loopback,RUNNING, MULTICAST, IPV4,VIRTUAL >mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
vfe0: 100084<BROADCAST, RUNNING,MULTICAST>mtu 1500 index 2
inet mtu broadcast 127.255.255.255
ether 0:13:d3:9e:63:6
Now will u please help me how i can solve the situation??
My ip address is not set during boot .
Masud
Edited by: masud_bd on May 19, 2008 1:31 PM

RAID 5 missing after reboot; RA Utilities non effective

I had 7 drives formated in RAID 5, after reboot, on my Xserve I can not mount RAID.
If I check with RAID admin, it seems everything to be o.k, but one event is strange:
RAID Controller 1 Fibre LIP; A Fibre Channel Loop Initialization Primitive (LIP) was detected. This often occurs when a new device is connected to the Fibre Channel network.
I did not connect any new devices... Same is with controller 2.
Every one of drives is described as "spare" but they were in RAID 5 all of 7 drives. If I check the arrays tab, no arrays are present.
If I try to Verify the array the "verify array" button is dimmed so I can not proceed.
Same is with Rebuild parity data or recognize array on both controlers.
Is there any possibility that I can establish RAID with all data?
I did not found any terminal commands for that...
Any idea? Any hint?

Hi Milos,
I was in the same situation few months ago. The same problems you reporting there, except of that, that my array dissapeared after successfull firmware update (and I had RAID3 on 6 disks). After unsuccessful technical support here I managed two trips of my disks to Apple engeneer in USA (I am from Czech Rep.) with no success. For the first time, they gave me back RAID 3 on 5 disks (not on 6 as I had before) and after second trip, thay gave me back 5 empty disks and the 6th one was damaged. So, my opinion as a man from Central Europe is, that we have no chance to have our datas back!
Problem was, that first 64 kB were zeroed (metadata with RAID schema are placed there). They tried (in Apple) to restore these metadatas on disks back, but as I said before, thay probably had a bad days.
Only one thing you can try is to find someone with XRAID at your place and try to put your disks there. May be your array will appear there, so you will be able to copy your data to some other disk. But if the first 64 kB on disks are zeroed ....
Anyway, please let me know if you solve your problem. I still have my disks untouched waiting for some miracle...

Mac OS 8.6 Auto network connect to a server after reboot is not working

We have multiple old blue and white systems on a network. All but one will automatically connect to the network when rebooted. I have gone into Chooser, Appletalk, put in the server IP address, put in the server password, checked the boxes that say remember Server name and password for next startup. I can connect at that time with no problem. When I reboot, the server does not automatically hook up. I have to go back into Chooser, etc. I created an alias on the desktop, but it still prompts me for a password to connect. I have performed a clean install of the Mac OS 8.6. It still does not connect to the server after reboot (after configuring all the settings again after the clean install). Please help..

Hi,
Thank you for posting in Windows Server Forum.
Can you please create the database manually with below command and verify.
PS C:\> Set-RDConnectionBrokerHighAvailability –DatabaseConnectionString
"DRIVER=SQL Server Native Client 11.0;SERVER=<SQL Server
Name>;Trusted_Connection=Yes;APP=Remote Desktop Services Connection Broker;
DATABASE=<DB Name>" -DatabaseFilePath "C:\DbFiles\<DbName>.mdf"
-ClientAccessName "<DNS RR Name>"
Grant DBO permissions to the service account on the RDS server and try to run your wizard again.
More information.
RD Connection Broker High Availability in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/27/rd-connection-broker-high-availability-in-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

ElementsAutoAnalyzer abends within a few minutes after rebooting the PC. How can I fix this?

I decided to start my PC from scratch (new hard drive, reinstall Windows 7 Ultimate 64-bit, then all software). ElementsAutoAnalyzer abends within a few minutes after rebooting the PC. How can I fix this?
Event viewer shows:
Faulting application name: ElementsAutoAnalyzer.exe, version: 12.0.0.0, time stamp: 0x530b7bfc
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000005
Fault offset: 0x0000000000031ccc
Faulting process id: 0xbdc
Faulting application start time: 0x01d072bd95218cd4
Faulting application path: C:\Program Files (x86)\Adobe\Elements 12 Organizer\CAHeadless\ElementsAutoAnalyzer.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: ea495e82-deb1-11e4-9750-001c25e903e8

Erica from Apple support: Your efforts to help on this subject are appreciated. However, during my wait for your supervisor, just when I stepped away from my desk for a moment you must have picked up your phone again. When I heard a noise (other than the hold music) I rushed back to my desk only to hear you hang up. When the phone rang and the ANI said "Apple support" I tried to pick up but you were gone by the time I got the button pressed.
Hopefully you'll see this note and leave a message on how to resolve this issue for me and the others from other similar questions posed on this forum.
Thanks,
George

Pdnsd works fine, but not after reboot

Hey guys, I just installed pdnsd and it works great, except that after each reboot, the server fails.
I've included it in my daemons array right after networking, and on reboot the boot messages show that it's starting successfully, but then it doesn't work and only gives a server failed error message when I run an nslookup or dig search.
Once booted, I can run /etc/rc.d/pdnsd restart and all is working fine again.
Anyone have any idea what the problem might be?
Thanks for any help.

skymt wrote:Did you get my email? I asked you to run pdnsd as root and see what errors it prints. I've also discovered since then that pdnsd logs to /var/log/daemon.log, so the relevant contents of that file might also be useful.
Yes, I did skymt and thanks for that. I got no errors at all and it ran just fine. I had already looked in daemon.log but didn't see anything that led me to a fix.
I've found that if I use the "none" option for uptest in the server section, everything works fine on a fresh reboot. Is there any problem with me using that option? Or would changing some other option fix it, perhaps?
All the permissions seem to be in order on all files and folders related to pdnsd.
Thanks a million for the reply and help.

Also RAID 5 missing after reboot; RA Utilities non effective

I am having a nearly identical problem as listed in the "RAID 5 missing after reboot; RA Utilities non effective" thread, with one or two small differences.
We shut down our Xserve RAID normally on friday, started it back up on Monday to find that one of the arrays was no longer there. RAID 1 is still working perfectly, but RAID 2 now has all the drives listed as spare. Tried all the tools in RAID Admin, but nothing has worked. At the advice of Apple tech support i updated the firmware to 1.5, swapped out controllers and cables, and tried using the Recognize RAID command in utilities. Nothing has worked. Apple recomended bring the drives to Drive Savers to get the data recovered. Does anyone have any other ideas?
Oh, also this raid was reporting a failed drive on friday before it was shut off, when powered back on the drive now claims to be fine.

Guess I got lucky.... After a reboot of the Xserve RAID, RAID #2 mounted again. Did my backups, shut it back down, and updated firmware to 1.5 with no problems. All seems good now.
Still wondering what happened.
It appears that drive #8 failed, and after the rebuild with new replacement drive, it seems as though the controller needed to be restarted too. The odd thing is, before the restart, #2 was acting like it had three new drives and no array configured at all. After the reboot, there is the RAID 5 array, no rebuild or anything - ready to go.
So here is my question:
How often does everyone reboot their Xserve RAID? should it be done periodically? Every 3 months? Every month?
Or is this just a hiccup with the parity rebuild, and nothing else to worry about, or even a firmware issue for the controller(s) that 1.5 may resolve?

All 3rd party plugins gone after update !!! HELP APPLE !!!!!!

All my 3rd party plugins are gone after the new update from apple !! I am running lep and logic studio G5 dual 2.5 ppc 8 gigs of ram !!!! What happen ???? Can not get the AU manger to launch !!!!! Help dead in the water !!!!!!!

Relax guy!
Try trashing to audiounits cache, and the Logic caches:
user/library/caches/com.apple.audiounits.cache
and
user*/library/caches/Logic/
Reboot, and try again...

ASM not mounting after reboot of external storage

I have a setup with 4 internal drives and 12 external drives(external storage, multipath). The diskgroup was orignally created on the 4 internal drives and then the disk group altered to add the external storage. Everything was fine until the external storage array got powered down. Then we rebooted both boxes and ASM did not come up. I also see the HEADER_STATUS as UNKNOWN for all the external storage drives.
Tue Oct 14 11:49:34 2008
SQL> ALTER DISKGROUP ALL MOUNT
Tue Oct 14 11:49:34 2008
NOTE: cache registered group DATA number=1 incarn=0xf4a85ef9
Tue Oct 14 11:49:34 2008
Loaded ASM Library - Generic Linux, version 2.0.3 (KABI_V2) library for asmlib interface
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
NOTE: Hbeat: instance first (grp 1)
Tue Oct 14 11:49:39 2008
NOTE: start heartbeating (grp 1)
Tue Oct 14 11:49:39 2008
NOTE: PST update: grp = 1, dsk = 4, mode = 0x4
NOTE: PST update: grp = 1, dsk = 5, mode = 0x4
NOTE: PST update: grp = 1, dsk = 6, mode = 0x4
NOTE: PST update: grp = 1, dsk = 7, mode = 0x4
NOTE: PST update: grp = 1, dsk = 8, mode = 0x4
NOTE: PST update: grp = 1, dsk = 9, mode = 0x4
NOTE: PST update: grp = 1, dsk = 10, mode = 0x4
NOTE: PST update: grp = 1, dsk = 11, mode = 0x4
NOTE: PST update: grp = 1, dsk = 12, mode = 0x4
NOTE: PST update: grp = 1, dsk = 13, mode = 0x4
NOTE: PST update: grp = 1, dsk = 14, mode = 0x4
NOTE: PST update: grp = 1, dsk = 15, mode = 0x4
Tue Oct 14 11:49:39 2008
ERROR: too many offline disks in PST (grp 1)
Tue Oct 14 11:49:39 2008
NOTE: cache dismounting group 1/0xF4A85EF9 (DATA)
NOTE: dbwr not being msg'd to dismount
ERROR: diskgroup DATA was not mounted
Tue Oct 14 11:49:39 2008
WARNING: PST-initiated MANDATORY DISMOUNT of group DATA not performed - group not mounted
Tue Oct 14 11:49:39 2008
Errors in file /home/oracle/admin/+ASM/bdump/+asm_b000_6358.trc:
ORA-15001: diskgroup "DATA" does not exist or is not mounted
Tue Oct 14 12:31:17 2008
Shutting down instance: further logons disabledPATH NAME HEADER_STATUS MOUNT_STATUS MODE_STATUS STATE GROUP_NUMBER DISK_NUMBER FREE_MB READ_ERRS WRITE_ERRS
ORCL:DISK1 MEMBER CLOSED ONLINE NORMAL 0 0 0
ORCL:DISK9 UNKNOWN CLOSED ONLINE NORMAL 0 15 0
ORCL:DISK11 UNKNOWN CLOSED ONLINE NORMAL 0 2 0
ORCL:DISK12 UNKNOWN CLOSED ONLINE NORMAL 0 3 0
ORCL:DISK13 UNKNOWN CLOSED ONLINE NORMAL 0 4 0
ORCL:DISK14 UNKNOWN CLOSED ONLINE NORMAL 0 5 0
ORCL:DISK15 UNKNOWN CLOSED ONLINE NORMAL 0 6 0
ORCL:DISK16 UNKNOWN CLOSED ONLINE NORMAL 0 7 0
ORCL:DISK2 MEMBER CLOSED ONLINE NORMAL 0 8 0
ORCL:DISK3 MEMBER CLOSED ONLINE NORMAL 0 9 0
ORCL:DISK4 MEMBER CLOSED ONLINE NORMAL 0 10 0
ORCL:DISK5 UNKNOWN CLOSED ONLINE NORMAL 0 11 0
ORCL:DISK6 UNKNOWN CLOSED ONLINE NORMAL 0 12 0
ORCL:DISK7 UNKNOWN CLOSED ONLINE NORMAL 0 13 0
ORCL:DISK8 UNKNOWN CLOSED ONLINE NORMAL 0 14 0
ORCL:DISK10 UNKNOWN CLOSED ONLINE NORMAL 0 1 0
16 rows selected.

Hi,
Verify if oracle software has read write privileges on raw devices, cause some Operating Systems changes owner to root after reboot the servers.
regards,
Rodrigo Mufalani

Why does mls qos trust dscp dissapear after reboot?

The command takes but after reboot, Invlaid inputs detected show up and "mls qos tust dscp" is gone from every interface.
Happens on both 2960-24PC-S / 2960-48PST-S switches.

Hi,
thanks for your reply.
mls qos
interface GigabitEthernet3/34
description *** DATA VLAN 35 - VOICE VLAN 34 ***
switchport
switchport trunk native vlan 36
switchport trunk allowed vlan 34,36
switchport mode trunk
mls qos trust dscp
no cdp enable
spanning-tree portfast trunk
If i don't include the global 'mls qos' command then the voice packets keep the dscp 46 value. If I add the mls qos command this causes the switch to set the dscp values to zero.
Thanks again
ps. there are some other mls commands on the switch... i don't know if these could interfere but they were already on there so i'm reluctant to remove them..

Xraid Arrays gone after reboot

Similar Messages

Maybe you are looking for