Xraid shows amber but I only one controller connected with ethernet?

I Finally connected my G5 to an Xserve Raid that I've had for about a year and I only have one ethernet jack to hook up to the Raid. Only have 4 drives in it now and only the one ethernet connection going to the top controller. I have updated all the software/firmware and mounted the drives.
When I go into the Raid Admin, everything looks good except on the left the Raid indicator is amber. The first three lights (Arrays/components/Fibre channels are green, the fourth Network is amber as well.
When I click to get the information it shows Upper controller 1-7 is green and "link up" but the Lower controller is amber and say's "link down". I suspect this is because I don't have it connected with an ethernet cable. I wish I could get another ethernet connection to hook up the lower controller to test but I can't.
Is this normal and if so is the light next to the name suppose to be amber or should it be green? Right now it's amber and I'm concerned something isn't working correctly. Am I correct in assuming that I should have the other controller connected at all times to the G5 even if I don't have any drives in the 8-14 slots? Is the other fan also suppose to be running?
Any explaination or help would be great.
Thanks.
Dual 2 Ghz PowerPC G5 Mac OS X (10.4.8) Xserve Raid
Powerbook G4 15" 1.25 Ghz Mac OS X (10.3.9)

The light is amber because the ethernet port doesn't have a link. It's not really a problem as long as you expect it - if you had a cable in there and it was still amber, that's the time to worry.
You don't need both ethernet ports active - as long as one of them is active you'll be able to administer the box, so it's fine to leave it that way if you want.
Everything else sounds like it's running fine.

Similar Messages

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in

I need to scan wirelessly from a MAC (OS 1.7 or higher) through Adobe Acrobat Pro X (or higher). Have discovered that all in one printers say they are MAC compatible but will only scan when connected with a USB cable. Would prefer a laser, color, all in one. Does anyone have printer suggestions that you know will scan wirelessly?

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Can I use Prime to create a WLAN report for only one controller?

I have multiple controllers all configured with the same WLAN/SSID, like most people probably do.
I am trying to get a report on one WLAN/SSID from only one controller. I don't want a report for the WLAN/SSID that contains information from all controllers - just one controller.
Has anyone ever figured out how to do that? Am I missing something?

We're close to that, anyway. I have a guest WLAN configured on each controller, and I want to see how metrics on the guest SSID, but would like it broken out per controller.
The guest network client count almost equals our production client count, and all that traffic is getting tunneled across the backbone. I want to explore local connectivity options - possibly dumping the guest WLAN traffic out at the controller instead of it traversing the corporate backbone.
Can't seem to figure out how to get a report to show that - seems like it's "all or nothing"...

TS1702 Renewed my subscription with the Sun app, was charged £0.69 but app won't load seem that I am not the only one having issue with this app. How can I claim my money back?

Renewed my subscription with the Sun app, was charged £0.69 but app won't load seem that I am not the only one having issue with this app. How can I claim my money back?

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I downloaded Adobe Premiere Elements to my iMac but got only one choice, for windows. How do I get it for my iMac?

I downloaded Adobe Premiere Elements to my iMac but got only one choice, for windows. How do I get a download choice for my iMac?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Why can I copy music to my iPad or iPod touch from multiple computers but from only one computer using my iPhone?

Why can I copy music to my iPad or iPod touch from multiple computers but from only one computer using my iPhone?
IPads and iPod Touches don't seem to have the same media copying restriction that my iPhone has. My main computer is at home. I have music at home and at work and sometimes I like to add it to my iPhone from work. I can do this no problem using my iPad or my iPod touch, but when it comes to my iPhone, I can only copy music to it from my main computer.
Why would the iPhone have this restriction but not the other two devices?
ps. Where's my "add currently playing song to playlist" button? I can't even find a third-party music app with this feature.

Because...!
I've no idea why either.
Although it isn't normally possible to sync an iPod/iPad/iPhone with two computers (or manually manage an iPhone from more than one) it can be achieved if all computers have copies of the self same library. See Re: how do i sync on a second laptop without the data on my iPhone 5 being erased?
tt2

How to say application module(s) to consume only one DB connection

Hi,
In my application, i use UI Shell template. All of my task flows are said to have new transaction always and not to share the data control. i have bunch of application modules (not nested AM) with many view objects. All the view objects are custom java data source implemented and none of them requires DB connection as they interact with DB using tuxedo connection. Expected concurrent users will be around 800.
i can understand that application module requires DB connection for activation/passivation, but how can i say all of my application modules to consume only one DB connection??
Thanks in advance.
Raghuraman

Jobinesh,
My application is based on UI tab shell template with each and every task flow set to begin with new transaction always.
I was using database tables for LOV view objects data population alone. Now that also has been changed to custom view data source implementation because of client requirement (LOV data needs to be cached till user-browser session)
With the new implementation,
1. I have some AMs with instances of entity driven VOs. With this, I do transaction with legacy system through Tuxedo. Custom view data source implementation is done to populate data from service. Similarly Update to service will happen by reading transaction listener list on save.
2. I also have couple of AMs with instances of non entity-driven VOs, which will be used as read-only table/LOV. For this also custom view data source implementation is done by reading the reference database table only one time during deployment.
3. As of now, none of my AMs are specified as Shared AM.
Questions:
1. I want to utilize the AM passivation/activation feature to control memory usage. I came to know "*The passivation process saves information used by the AM into the passivation store - usually a database*". I have a database, from where i am reading data for LOV during deployment. Can i have the single connection of that database configured for all the AMs (Both tuxedo transaction VO's AM and LOV VO's AM) so that i can avail this feature. If so, how can i configure all the AMs to consume only one connection?
2. Any other way to avail this AM passivation/activation without database.
Thanks in advance.
Raghu

Configuring PPP options for only one VPN connection

How do you configure PPP options for only one VPN connection that is using L2TP over IPSec? The built-in VPN client in 10.4.9 is failing authentication because it won't talk MSCHAP-V2 (this is the only authentication protocol I can use) with the server. I am able to establish a connection if I add the following to /etc/ppp/options:
refuse-eap
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
However, these options will affect all PPP connections. The preference file that contains the network configurations (/Library/Preferences/SystemConfiguration/preferences.plist) also contains PPP options for each specific network service. After some searching around, I found that there are several keys that seem promising (MSCHAP2, etc.). But these keys take a string value and I have no clue what they should be. These keys are defined in SCSchemaDefinitions.h file.
Any ideas?
Mac OS X (10.4.9)

Hi Brian,
I just tried to check all of ADDT´s "includes" files for any internal references (read: "require" or "require_once" statements) to the file "tNG_config.inc.php". So far I can only see this file referenced in the file "tNG.inc.php" (within the "$KT_tNG_uploadFileList1" array).
So what could this mean ? Maybe you´ll have to make copies of the the original "tNG.inc.php" as well and save them as, say, "tNG.inc_ital.php" file plus make sure that these copies internally point to a different "tNG_config_ital.inc.php" file -- because it´s always the first mentioned file which gets referenced from e.g. an ADDT login page (see the "Load the tNG classes" - part)
I want to use ADDT’s User Registration Wizard and I have looked at all the neat stuff in the Control Panel/Login Settings
The Control Panel will always update the main "tNG_config.inc.php" file, so any further modifications will have to become manually applied to the custom files you´re creating.
Cheers,
Günter

Two Macs - only one can connect to Airport at a time

Starting today, after 10 days of successful operation, when I came home I couldn't connect to my home (new "square" Airport Extreme) network with my Core 2 MacBook Pro. My wife was happily connected on her PowerBook G4.
Puzzled, I tried a few obvious things:
Airport OFF, Airport ON ... no joy
Logout and back in ... no joy
Restart ... no joy
Then I turned my attention to the Base Station:
Restart ... nope
Change to "None" security ... nope
Change back to "WPA Personal" ... nope
Humbled, I stopped and had dinner. My wife's G4 went to sleep, my Intel went to sleep. Now it gets interersting! My Intel woke up first and immediately joined the network -- I'm happy till I hear my wife say SHE can't get connected.
To make a long story short, I have two laptops on my desk, and only one can connect at a time! This is BIZARRE. Turn off Airport on either one and its buddy gets a connection immediately, and vice versa. Sleep the connected one and the other connects.
I am out of ideas.
Errors on the G4:
Feb 28 20:09:45 localhost configd[35]: WirelessConfigure: 88001003
Errors on the MBPro:
various 88001006 errors as reported by others in this forum.
Both Machines at all the latest updates; the MBPro has the new Extreme software installed from the CD that came with the new hardware.
I would welcome suggestions ...
MacBook Pro Core 2 Mac OS X (10.4.8)
G4 Cube Mac OS X (10.4)

Software Update is not offering me any Airport updates on the G4 (or the Intel).
The recent Airport Update, "AirPort Extreme Update 2007-001", is of course only for Intel Macs.
They could only be "trying to use the same IP address" if they were not configured to use DHCP, but they are configured to use DHCP, and whichever connects does get an address in the 10.0.1.[2-200] range so I think that's not the problem.

I have the new ipad and inserted a new tata docomo sim , it shows network but is not able to connect to the internet,,, can any1 plzz help me out

i have the new ipad and inserted a new tata docomo sim in it, it shows network but is not able to connect to the internet,,, can any1 plzz help me out

Let's start with the most obvious? Have you paid for service? If yes, thry THIS.

In partial delivery, what does it mean by Create only one delivery (also with qty = 0)?

Hi Expert,
I would like to ask
"Create only one delivery (also with qty = 0)"
It is mentioned in Partial Delivery
The following partial delivery agreements exist:
A Create a delivery with qty greater than zero
B Create only one delivery (also with qty = 0)
C Only complete delivery allowed
D No limit to subsequent deliveries
Please provide example together.
Many thanks.
Rgds,
Ong

Dear Lit Yit Ong
The use of B is Creating only one delivery (also with quantity = 0) Same like as indicator A, only the difference is we can create a delivery with zero qty also.
Regards
venu Gopal reddy

Am I the only one having problems with ringer volume since the update?

Am I the only one having problems with ringer volume since the update?? I'm hard of hearing and before updating to IOS7 I could hear my alarm and ringer just fine. Volume is turned up all the way and I've chosen the loudest sounds I could and still having a difficult time hearing.

Annie Hall is available on DVD only.
It is not available for streaming and I believe movies available for streaming are the only movies available with the Netflix app on an iOS device.

APE only works when connected via ethernet

I have a new AirPort Extreme that I am trying to add to my existing network (an older APE base station and 2 Express) and no matter how I try to configure it, I can't get it to work without being connected with an ethernet cable (either to my MacBook Pro or to the other APE base station).
I also tried setting it up on its own with a new network and that wouldn't work either.
If it isn't plugged in, and I try to change the configuration, i get this error:
"AIRPORT UTILITY WAS UNABLE TO FIND YOUR BASE STATION AFTER RESTARTING.
The settings for this base station have been successfully updated, but there was a problem re-joining the wireless network or finding the base station. You may need to select your network from the AirPort menu and try again."
The amber light flashes, and it never shows up again. It doesn't matter if i unplug the APE, turn AirPort off and on, restart the utility, restart my mac... it won't ever show up unless I connect via ethernet, but as soon as i connect the ethernet cable, everything works fine.
Does this mean that there is something wrong with the APE, or is there something I'm doing wrong with my setup (I've tried the assisted setup and manual setup following the instructions in the "Designing Air Port Extreme 802.11n Networks" pdf)?

Yes. It's just the one APE that is a problem. The rest of the network is fine.
If I connect the new APE to the older APE with an ethernet cable, I can see it in AirPort utility and use AirPort Disks connected to it, too; but as soon as I unplug the ethernet cable, it can't get back on to the network and it no longer shows up in AirPort utility.

Why does my 5th gen airport extreme go on the fritz and disconnect all 2.4GHz devices when one device connects with 5GHz? I've done some research and it seems other people have had this problem too? I'm very frustrated and want my money back

Running an apple tv 3rd gen, iPod 4th gen, iPhone 4s, windows vista laptop, and Xbox 360 with media center. 2.4GHz devices work great when apple TV is connected with ethernet, but as soon as I switch the apple tv to wireless, the 5th gen AEBS kicks over to 5GHz, my 2.4GHz devices lose connection and I can't reconnect my 2.4GHz devices, until I do a hard reset of my AEBS and reconfig the network with my iPhone, if I use the airport application for PC, my wireless devices still won't connect. I bought this router 20 days ago so I could run dual band wireless, if I wanted to limit all my stuff to 2.4ghz, I would've got a g router and saved some money. This thing supposedly has 3 antennas, one for 2.4, one for 5, and one for the guest network, so why do I loose my 2.4 when it "switches" to 5GHZ if it's supposedly always broadcasting both freq's????????

I had a problem with dual bands running almost everything you have there. When I'd have a iPad and MacBook running, I'd turn on my 360 and I'd loose all connections though. Until a hard reset and the same cycle. I returned my airport a day later for a new one. No problems since. I had a faulty one. Not saying yours is, but mine was. I troubleshooted everything from options, manual setup, everythinggggggggg. It was a wasted 7plus hours to find out it was faulty. I have a pc, MacBook, apple tv, 360, and 2 iPads using it now flawless.

We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?

We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?

Joining an encrypted WEP or WPA Wi-Fi network

Xraid shows amber but I only one controller connected with ethernet?

Similar Messages

Maybe you are looking for