Xref with object number greater than trailer's size value

Hello,
a client sent to us a PDF with a strange xref table. Here is what it looks like:
xref
0 55
%% standart xref entries
200001 5
0000052507 00000 n
0000052793 00000 n
0000053079 00000 n
0000053365 00000 n
0000053727 00000 n
trailer << /Size 55 /Root 54 0 R /Info 53 0 R >>
startxref
54691
%%EOF
Those extra five objects are well formed link annotations. According to the standart, I should ignore those objects but all the tools I used to inspect the document found no problem in it.
So what should I do: concider /Size as the upper limit for object numbering in the document, or reach every reachable object, no matter what its object number is ?

It looks like some tool is applied to add those link annotations after the document is created and is quite lazy in its indirect object management: It seems to assume that by choosing a high enough object number (>200000) there wont be any collisions, and that it can simply insert the indirect objects (probably pregenerated and available as a blob with some placeholders to replace) somewhere before the xref table and an appropriate xref section just before the trailer, otherwise ignore the document, and everything is ok.
This, of course, is a mere assumption based on the few facts presented.
But if that is the case, the originator of those PDFs should hope he never substantially has to change the process of creating the source documents as such a tool will fail miserably with many documents nowerdays.
Furthermore you should inform the originator of the documents and tell him that his documents are broken in a way that might make post-processing break them utterly.

Similar Messages

Best way for to choice number greater than 0.0001

Hi
I must put in where condition all number greater than zero, but the precion must to be in 4th place
I tried in where condition
   trunc(abs(T$QUAN$O),4)>0.0001Is there some other way ?
There are many columns that must compared (10 )
Tia
using
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
PL/SQL Release 9.2.0.8.0 - Production
CORE     9.2.0.8.0     Production
TNS for IBM/AIX RISC System/6000: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production
Edited by: muttleychess on Jan 11, 2012 7:01 PM

I tried something like, but no work
WITH X AS(
SELECT 1 COD, 0.001 VALOR FROM DUAL UNION ALL
SELECT 2 COD, 0.0001 VALOR FROM DUAL UNION ALL
SELECT 4 COD, 0.00001 VALOR FROM DUAL UNION ALL
SELECT 5 COD, 0.000001 VALOR FROM DUAL UNION ALL
SELECT 6 COD, -0.001 VALOR FROM DUAL UNION ALL
SELECT 7 COD, -0.0001 VALOR FROM DUAL UNION ALL
SELECT 8 COD, -0.00001 VALOR FROM DUAL UNION ALL
SELECT 9 COD, -0.000001 VALOR FROM DUAL )
SELECT X.*, TRUNC(ABS(VALOR),5) TRUNCADO, ABS(VALOR)*10000 MULTIPLY
FROM X
WHERE TRUNC(ABS(VALOR),5)>0 should return only cod 1,2,4 and 5
but
       COD      VALOR   TRUNCADO   MULTIPLY
         1      0,001      0,001         10
         2     0,0001     0,0001          1
         4       1E-5       1E-5        0,1
         6     -0,001      0,001         10
         7    -0,0001     0,0001          1
         8      -1E-5       1E-5        0,1What is wrong ?

How to prevent numericstepper from setting the value to the defined Maximum when a number greater than maximum is entered in by keyboard and user hits the "Enter" key.

I need to set the Maximum so that the use can use the mouse to change the value of numericstepper (and not go over a certain number), but at the same time I have to allow the user to enter their value by typing in the text field. When the user enters a number greater than the Maximum, I disable the "Ok" button of the dialog and show a red warning(error message). The issue is that the user can hit "Enter" and numeric stepper would set the value to the Maximum and the dialog box would close and the rest of code would run. I want the numericstepper not to change the value and keep showing the warning even if the user hits the "Enter".
Note: Setting maxChar does not help since my maximum is 1000, and user might enter 5555
I would appreciate the help.

Thanks for trying to help, But
The issue is that if I set the maximum value of stepper 1 greater than the max value that I want, then the user can select an invalid value(of myMax + 1) when he clicks on the UP arrow of the numeric stepper(which is not acceptable for what I am working on).
I need to preserve the users invalid number, while not letting the user to select an invalid number by clicking UP key.
I noticed that when the user enters a number greater than the Maximum, and then click on the down arrow, it would set the value to 1 less than the maximum. This is not acceptable either.

In ITunes, my library was about 55 G. I have a Ipod Classic 160 G. I synchronised my IPod on ITunes and I checked the tag Convert songs with a throughput greater than 128 kbit / s ACC before synchronisation I took maybe 6 hours to synchronise, and af

In ITunes,
my library was about 55 G. I have a Ipod Classic 160 G. I synchronised my IPod
on ITunes and I checked the tag Convert
songs with a throughput greater than 128 kbit / s ACC before
synchronisation I took maybe 6 hours to synchronise, and afterward my library was
about 42 G. All my tunes, more than 9500, seem still be in library. Most of my
library is from music purchased in ITunes store along with copies on my old CDs
an some MP3 files from other discs. This is good for me but what happened?

This is good for me but what happened?
I don't understand the question... Did something happen that you think should not have happened?
It took such a long time to sync, because iTunes was converting songs with bit-rate higher than 128 kbps "on the fly" while syncing. That takes much longer than just syncing the songs.
Also, since you have so much space on your iPod (compared to the size of your music library), you should not use that "convert to 128 kbps AAC" setting. For songs that are encoded higher than 128 kbps, the conversion reduces sound quality. You may want to uncheck Sync Music and Apply, to remove the songs on the iPod currently, and then sync it all again without the "convert" setting checked this time.

How to Create Purchase Order with Co Product greater than Consumption

Hi All,
I'm new to SAP. Can any one please help with the steps to create PO with Co Product greater than Consumption.
Thanks in Advance.

Hi Srinivasu,
If you are talking about handling by-products during subcontracting follow the following steps.
Create Purchase order with item category "L". In the components tab maintain by-product in negative quantity. If you are not sure about the actual quantity, enter theoretical quantity ( Actual quantity can be adjusted in Subsequent adjustment in Goods receipt).
Hope this helps you.
If this has not helped you, please elaborate your requirement.
Thanks
Vasuki B S

How do I number pages consecutively starting with a number other than 1?

In Pages, how do I number pages consecutively starting with a number other than 1?

Inspector > Document > Section > Page Numbering: click on the dropdown menu

How i can fetch the template greater than 32000 k size into reach text editor

how i can fetch the template greater than 32000 k size into reach text editor

Would this help you?
- Dynamic Action Plugin - Enkitec CLOB Load

Merging files greater than 100MB in size

How do I merge multiple pdf files greater than 100MB in size?

However...the talk of 100MB suggests you don't actually have Acrobat. This is indeed a fixed limit if you are a subscriber to PDF Pack (CreatePDF), and the way around it is to get Acrobat.

[svn:fx-trunk] 12552: DataGroup now tracks the indices of the active virtual item renderers with a list , rather than the min/max values.

Revision: 12552
Revision: 12552
Author:   [email protected]
Date:     2009-12-04 13:45:12 -0800 (Fri, 04 Dec 2009)
Log Message:
DataGroup now tracks the indices of the active virtual item renderers with a list, rather than the min/max values.
DataGroup/addItemRendererToDisplayList() now respects the overlay.
QE notes:
Doc notes:
Bugs: sdk-24052
Reviewer:
Tests run: DataGroup, List
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-24052
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/DataGroup.as

Hello Martin:
Thanks for your input. However I am not certain we have resolved this issue adequately, or understand the principles governing the css as regards this spry menu framework 2.0 (1.0).
For example, the menu only works in IE 6.0 if the css remains in the head. I agree with your original post that it shouldn't make any difference whether the css is posted in the head or in a separate style sheet (so long as specificity issues are addressed). Both should work -- and yet it doesn't.
If the CSS is placed in the separate style sheet governing the total site, it doesn't work for 6.0. If placed at the top of the style sheet, conflicts of specificity prevent the menu from rendering properly in any of the browsers causing the rules for general links to govern the menu.   This has been verified using a cross browser testing. If the styles are placed at the bottom of the style sheet to help them take precedence, they work in all the browsers except for IE 6.
The website I am building needs to support IE 6 for a variety of reasons, and because it is catering to the non-profit community and to low income persons, I am mindful of even small differences in page weight.
So for me, at least, the issue remains baffling.
I appreciate your input, but also would appreciate the input from others, and especially Adobe Community Professionals and employees. The spry framework in this regard is not well documented. I am not certain if this is exclusively a CSS problem, if it might also be complicated by the architecture of the spry framework, or if indeed other variables are at play.
I would be my hope that in resolving the problem, other users of the this particular spry framework might also benefit.
Thanks,
Steve.

CcBPM - switch with a condition (greater than) in XI 7.0

Hello.
I have this BPM that must have a switch condition like:
IF <field xpto> of the received message is greater than 0.
branch 1.
ELSE.
branch 2.
ENDIF.
In XI 7.1 is easy, because the condition editor has logical expressions like >, <, etc ...
In XI 7.0 we don't have that, but in SAP help I read:
You want to formulate the following condition: The booking number (BookingNumber) is greater than 0100.
Since the greater than (>) operator is not available in the condition editor, you can use the following solution: You define the relevant logical expression in the expression editor by means of an XPath predicate, and assign it to a node element. Using the condition editor you then just query the existence of this node element (by using the existence operator (EX)).
This means you first create the following expression in the expression editor:
/FlightBookingOrderConfirmation [BookingID/BookingNumber > 0100]
Using the condition editor, you then formulate the following condition:
(/FlightBookingOrderConfirmation [BookingID/BookingNumber > 0100] EX)
The meaning of this condition is as follows:
A node element FlightBookingOrderConfirmation exists, to which the following applies: The content of the subelement BookingID/BookingNumber is greater than 0100.
In my example, the xpath for the variable is:
/p4:EventMessage/p4:MessageBody/p5:Order/p5:Totals/p5:TotalGrossAmount
But i'm not getting how to use the bracket condition.
Regards,
Valter Oliveira.
Edited by: Valter Oliveira on Mar 10, 2009 6:04 PM

Hi, valter:
Existence operator (EX) is to check if the node exist in your source message or not.
It is used in Conditional Editor, mostly in the conditional routing in ID.
IF <field xpto> of the received message is greater than 0.
branch 1.
ELSE.
branch 2.
ENDIF.
If your branch 1 or 2 is a send step, then you can use the conditional routing to substitute BPM logic.
otherwise, you can not use conditon editor to replace your BPM logics.
Regards.
Liang

Transferring data to a flat file with a length greater than 255 bytes??

Is there a way to do this? At the end of the month, my dataset will reach a length of anywhere between 271 and 335. Even though I have the transfer field setup with a length of 512, I am only getting 255 characters worth of data when I pull the flat file in from the server.
Has anyone discovered a way to handle this? I cannot break the record up into blocks of 255, the Transfer has to be able to handle something greater than a length of 255.
Many Thanks!
Tavares L. Phillips

OK - according to OSS note 626010:
Short text          "TRANSFER f TO dataset" ignores LENGTH addition
Responsible         SAP AG
Component           BC-ABA-LA
                    Syntax, Compiler, Runtime
Long text
Symptom
In rare cases, the "TRANSFER f TO dataset" statement ignores the LENGTH
addition.
Other terms
DATASET, FILE
Reason and Prerequisites
This is caused by a kernel error.
Solution
The error is corrected for SAP_BASIS 6.20 using kernel patch 848.
Valid releases
Software Component                        Release
                                          from            to
SAP_BASIS SAP Basis component
610          - 620
It's an old note but...?
Rob

Edge Animate CC 2014 issue with SVG - Images greater than 1024 x 1024

Hi, since i updated my Edge Animate CC for Edge Animate CC 2014 i have issues when i import .svg files. Edge told me "Images greater than 1024 may cause unexpected behavior on mobile device" when i import .svg files smaller than 1024 x 1024 ?
When i publish my animation i have a weird things happening and my image scaling default is 10% instead of 100% when i import. Someone had this issue ? Something we can do ? My images a less then 1024 x 1024 and work perfectly in Edge Animate CC 2.0

Ok. I've solved. I needed to load some things:
EC.Parallax.setup (sym);
The full code (that works for me) is:
-- compositionReady:
EC.Parallax.setup(sym);
// Load Edge Commons
yepnope({
load: [
"http://cdn.edgecommons.org/an/1.1.0/js/min/EdgeCommons.js",
// Load style sheet for the overlay
"http://cdn.edgecommons.org/an/1.1.0/css/style.css"
-- click
// Open image in spotlight overlay
// Set up configuration
var config = {
width: "1024",
height: "768",
type: "image",
source: "images/dog.jpg"
EC.Spotlight.open( config );
I hope to serve others.
Regards

How do I search for files greater than 500M in size within a directory?

I would like to know how to recursively search through a directory and it's subdirectories for files greater than 500M. What is the command for this?
Thanks!

Oh my, it's too early...
You want >500M files, here you go...
find /path/to/dir -type f -size +524288000c
**BLUSH**
To add something useful here, in ksh you can type
find /path/to/dir -type f -size +$((500*1024*1024))c

Does Labview have a Random Number Generator for U16 with a periodicity greater than 64 Million instances of U16words and one with SEED as the connector?

We are doing some testing that requires 64MegaWords be written to our DSP memory with random values to do a validity check and without repeating sequences with using the previous value as the seed for the next and us passing it the initial seed. The dice one doesn't meet that criteria, and I was not sure how the continuous random number generator parameters work and if any of them would meet this criteria. Anyone have any information that might help?
Thanks,
Sue

Hi suem,
There is no reason why you couldn't simply write a pseudo-random number generator by yourself. Simply select a random number algorithm you want to use and implement it in LabVIEW. You do not need to interface code written in another language in order to implement a pseudorandom number generator. If you have a DAQ card or something, you can also use inputr noise or some other hardware soruce to generate real random numbers. For that also LabVIEW is an excellent tool.
Tomi
Tomi Maila

Creating PDFs using Adobe Acrobat 9 Pro and can only see the first 10 pages in PDF even when the page numbers on bottom state 10 of 13 (or any number greater than 10).

PDFs create great, unless they should be over 10 pages and then it appears the data was converted to PDF by viewing the page numbers at the bottom of the PDF but you can only view the first 10 pages in the pdf file.

Hi stephaniec0103,
Could you please let me know what exact dot version of Acrobat 9 and OS you are using.
Have you tried repairing Acrobat from the Help menu?
Acrobat 9 is an older version and incompatible with new OS versions, so I would suggest you to try using Acrobat XI (latest version) and check for the same.
You may download a 30-day free trial version of Acrobat from the below mentioned link:
Download Adobe Acrobat free trial | Acrobat XI Professional
Let me know how it goes.
Regards,
Anubha

Xref with object number greater than trailer's size value

Similar Messages

Maybe you are looking for