Xsan 1.4.1 and Quicktime Error -108

First, have a brief look through this old thread:
http://discussions.apple.com/message.jspa?messageID=2468809#2468809
This was a huge ongoing problem with anyone who was using final cut studio apps and xsan (until it was resolved in 1.4) As of recently (just after upgrading to 1.4.1) on one of the machines in our cluster, instead of 2048 corruption of rendered files 50% of of the time, I now am seeing a new issue that about 20% of the time, a render fails due to error -108, always on one of the machines.
So far I've tried rebooting and remaking the cluster, and nothing seems to have fixed the issue. I had been using this machine as well with just 1.4 and 10.4.8 without this issue for a decent amount of time as well. Apple support was nice enough last time to have submitted the problem to engineering even though I didn't have a support contract cause of the amount of heat they got for the 2048 issue, but this time it sounded like I would have to buy support for 4 seats before anything happened, so I'm kinda out of luck.
Wanted to know if anyone else had this issue and if it's a new potential issue, or just something that will need me to reinstall the OS on that machine.
Thanks for anyone who can provide some insight!

There seems to exist license issue.
Yesterday, I have upgraded MDCs from 10.4.6 & Xsan 1.3 to 10.4.8 & Xsan 1.4.
Xsan & StorNext clients can mount Xsan Volume.
But even shutting down a Windows client, total number of connected clients doesn't reduced at Xsan Admin.
So when the # of clients is more than # of SNFX licence.dat, the windows client can't mount Xsan volume.
BTW at cvadmin # of connected clients is recognized correctly.
Any idea?
Thanks!
Xserve G5 2.3 DP, PowerMac G5 2.7 DP Mac OS X (10.4.8) Xsan 1.4

Similar Messages

Failed: QuickTime Error: -108

Everytime I try to use Compressor to create a file using the 'HD for Apple Devices (10 Mbps). it fails within seconds with an error message of 'Failed: QuickTime Error: -108' . I only get this on my MacPro 12 core. The Macbook doesn't have this issue. I guess the error lies within Quicktime itself. Any suggestions appreciated!

OK, Compressor should show up in the list when you click the Purchases button:
The official way to reinstall is to hold down the Option key while you click the Purchases button. I assume it looks to see if it's installed. If it isn't, then it says Install at the right instead of Installed. Again, this is assuming you've trashed the original program from the Applications folder. I can't remember if it's enough to put it in the trash, or if you have to actually empty the trash, or if it also works if you've copied the App file to an external disk and then disconnect that.
If yours is not working this way, or if Compressor is not even showing up, then I think one of two things is going on. #1 - is it possible that you have two different Apple IDs and you're signed in with the one that did not make the Compressor purchase? or #2 - there is a problem with your Apple Account and you're going to have to get help from tech support. If it's the correct account but it does not remember what you have purchased, then you need to get that straightened out.
I'm sorry that you're having these glitches, but this is the accepted technique for reinstalling - I've done it myself.

Quicktime Error 108 - unknown error has occurred when I use URL function

Quicktime version 7.1.5
Windows XP pro
Dell 8300 / Dell Latitude / HP system
In quicktime, if I try to input an address in
File: URL,
the error 108: unknown error has occured.
this happens on 4 machines, 3 Dell running XP and 1 HP machine running on XP as well.
Am I missing something or is there a plug in I am missing.
Driving me bananas.
Thanks for help.
Michael

hmmmm. are all the PCs on the same network?
if so, is there systemwide security software? if so, check to see if the QuickTime Player is being allowed access to the internet.

ITunes and Quicktime Error after automatice Apple update, need help!!!

So I currently have a new labtop with windows vista. I have been runining iTunes for the pass 3 months already no problems. The Apple automatic update has never caused any problems till now. Quicktime needed to be updated today, and I accecpted the update, prior to that iTunes and Quicktime was working properly. Once the quicktime update was complete, it restarted my computer like usual. Then when I tried to open iTunes this error came up:
"iTunes cannot run because it has detected a problem with your audio configuration"
Now I checked the audio configuration and nothing was changed or anything, that has not been touched at all, so I still think it had to do with the update. The next error was came up when I tried to open Quicktime and it read:
"Runtime Error!
Program C://ProgramFiles/QuickTime/QuickTimePlayer.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information"
So as long as I have been using Quicktime and iTunes I have never encountered this, I tried to re-install but the error kept coming up after it was installed. Please help me out!

try doing following the steps in these articles
http://docs.info.apple.com/article.html?artnum=31115
and
http://docs.info.apple.com/article.html?artnum=93976
hope this helps

ITunes Error -3 and QuickTime Error 1722

Help!
I'm at the end of my tether here, I've been trying to install iTunes 6.0 on Windows XP SP2 and getting the error -3. So, I tried the standalone Quicktime installer as recommended on this forum and I get the 1722 error.
I've followed all the recommendations for fixing the 1722 error:
- I've uninstalled iTunes & all versions of Quicktime
- I've stopped all Anti-Virus/Anti-Spyware software
- I have full admin rights to the machine
- I've updated my Windows Installer
- I've run the Windows Installation Clean-Up Utility
- I've hacked the registry to death giving permissions to anything vaguely associated with Apple
- Ditto for permissions for the WINDOWS\Registration folder and the Program Files\Apple folder and the folder I'm installing from.
- I've stopped nearly every service I can and uninstalled just about everything that's non-essential
Are all Apple's updates so difficult to get working for Windows users? Should I just go back to the version of iTunes I got with my iPod and forget about updates or perhaps it's a cunning ploy to get me to buy a Mac?
Please, please help! I'm sick of this.
Thanks.

I tried the standalone Quicktime installer as recommended on this forum and I get the 1722 error
good lord, psifive ... are we talking: "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected." here?
that's an extremely unusual and exotic error message to be getting in this context.
let's proceed fairly cautiously, and start with something minimally aggressive. try
b method 1
from the following document:
http://support.microsoft.com/default.aspx?scid=kb;en-us;555175
does the standalone go through now?
love, b

ITunes and Quicktime Error Messages

Hello all,
I get the following error message when I try to open iTunes and Quicktime from my desktop:
"The feature you are trying to use is on a network resource that's unavailable."
When I tried to uninstall iTunes I got the following error message:
"This action is only valid for products that are currently installed."
When I went to the specific folder(s) that they are in, I was able to open iTunes and Quicktime without a problem.
Has anyone ever encountered an issue like this? I just started having problems with these programs.
Thank you all in advance for your help.

I figured out the problem. I had to use the Windows Installer Cleanup. I haven't had any other problems thus far.
Thanks again.

Itunes and Quicktime errors when installing

HELP! I tried installing the latest version of Itunes, but I keep receiving a variety of error messages. When I install the Itunes and Quicktime bundle, I get "Error Code: -3" and when I try to install the standalone Quicktime, I get a bunch of messages saying that a file cannot be found, then error message 1714, and then to consult the Windows Installer help (Msi.chm). I tried to manually remove the old Itunes and Quicktime, but it won't work. Any information on the topic would be greatly appreciated.

hi jmorta!
apologies for the slightly impersonal nature of this reply, but i've just started troubleshooting one of these off in another thread in my post immediately prior to this one ...
let's start you off with the techniques i'm starting anndruu off with over here:
http://discussions.apple.com/message.jspa?messageID=1789002#1789002
love, b

Itunes 9 and Quicktime error 1402 hkey_local_machine\software\machine\micro

Hi,
I am a beginner when it comes to software and dowloading problems. I gave my husband an Ipod Nano for Christmas and I have spent close to 12 hours trying to figure out why we can't get Itunes 9 and Quicktime to load. Everytime we try we get to the very end and we get the following message:
error 1402
hkeylocalmachine\software\machine\microsoft\windows\currentversion\run
Any help would be appreciated as my husband was so excited to receive this gift and it is just a paper weight at the moment! Thank you!

Hello, I hesitate to post this advice to a person who states they are a beginner with software, since it involves going into the PC's registry. Don't do this if you are not comfortable with it.
Using the registry editor ( go to Start, Run, type in "regedit", then click OK )
navigate to the key from the error message, click once on it, then click Edit, Permissions.
If your User Profile has Administrator rights, then the boxes should be checked next to Full Control and Read. SYSTEM should be set the same.
If they aren't, I suggest you change them.
Another option would be to create a new Windows administrator account, and see if you can get itunes to install using that.

QT 10 and OSStatus-Error -108

Hello readers
I did try to use the Screen Recording function but as soon as I hit the menu entry I get the error "OSStatus-Error -108". If I hit "OK" and then do the same command again, I won't see the error again but if I quit QT it will freeze.
Does anyone have a idea what's wrong?
Thank you for your help.
Kind regards
Thoams Thaler

I did test the machine with an second user, but I still have the same error message.
Alos a installation of the Mac OS X 10.6.2 Combo didn't solve the problem.
I just don't like to setup this machine again from scratch as I did install some software which takes an additional 1hour of installation and setup.

IMovie '09: Export to Quicktime: Error -108

I've been trying to export a movie - just over an hour long, primarily photos - to Quicktime. I was using the Apple Codec now I'm trying the MPEG-4 setting, with the HD 190X1080 16:9 size and 48,000KHz audio.
Every single time I try I get the "error code -108" message - not enough RAM. However I'm using a 24" iMac with 4GB.
I have NO ideas what-so-ever can some please point me in the right direction?
I'm running Snow Leopard - I've restarted the machine, repaired the permissions, the only thing I can imagine it's related to is that some of the material (music) is running off of an external hard-drive. Please? Some one help!

I would suggest trying it at 960x540. That will cut down the size by a factor of 4 and may let it fit in the RAM. This size upscales very nicely on most TVs because it is a simple transform to go to 1920x1080.
If that does not work, you may need to split your movie into shorter pieces.
What is your final destination? BluRay?

New ipod nano and error in updating itunes and quicktime (error 1905)

this is really annoying me, i have itunes 6.0 or 6.1 or something, and i recently purchased an ipod nano.it said the new nano was only compatable with itunes 7.1, so i went to apple.com and downloaded it. it took two hours to download the set-up for itunes 7.1. i ran the set-up, and then in the middle of it this error came up:
Error 1905.Module C:/ProgramFiles/Quicktime/GTUIPanelControl.dll failed to unregister. HRESULT -2147220472. Contact your support panel.
i pressed okay twice, and it went through the rest of the process and it says this:
Could not open key:
HKEYLOCALMACHINE/Software/Classes/QuickTime/CLSID. Verify that you have sufficient access to that key, or contact your support personel.
all of this is very frustrating, but after i click "ok", it reads this:
The installation of QuickTime did not complete successfully.iTunes requires QuickTime.
Please help!i would like to utilize this ipod sooner than later, obviously.
thank you

http://www.microsoft.com/downloads/details.aspx?FamilyId=0A8A18F6-249C-4A72-BFCF -FC6AF26DC390&displaylang=en
I used that download, which seems to have worked for some people, but not others. It has something to do with downloading a VBScript. Anyway, I did this, but when I tried to complete its download, it said "Error registering the OCX C:\WINDOWS\system32\vbscript.dll"
I then tried to run that file through Run, typing in "regsvr32 %SystemRoot%\system32\vbscript.dll"
I was told it would "reregister" it. Unfortunately, I was met with other error message. ""DllRegisterServer in c:\WINDOWS\system32\vbscript.dll failed. Return code was 0x80004005"
I was told that it had something to do with not having adminstrative privilegdes. I've dealt with these "adminstrative priviledges" before when Norton refused to work, and its no happy mess. But if someone can shed any light on the situation, that would be great.

ITunes and Quicktime error...

Hiya...
I've read all the threads and still can't find an answer to my problem, I hope someone can help me...
when i try to open iTunes the following message pops up:
"QuickTime failed to initialize (error -2093).
QuickTime is required to run iTunes. Please re-install iTunes. "
... so I re-install iTunes and everything is hunky-dorey until after I turn off my pc and come back to go into iTunes... then the message pops up again...
... I have gone into task Manager Processes and iTunes.exe is there when the message pops up, but in the applications tab, the note is there about QuickTime not being able to run...
any ideas?? I'm getting tired of having to re-install iTunes everyday!!
MESH Windows XP

try doing following the steps in these articles
http://docs.info.apple.com/article.html?artnum=31115
and
http://docs.info.apple.com/article.html?artnum=93976
hope this helps

Windows7 and Quicktime error -43

I've downloaded QuickTime and installed it. If I click on the desktop shortcut, nothing appears to happen although the program is listed as running in the task manager processes tab. If I go to the directory where the software was installed and double click on sample.mov I get error -43: a file could not be found. I've uninstalled and reinstalled Quicktime with no change.
I'm running Windows7 64 bit.
Thanks

See if anything in this post might be of help
https://discussions.apple.com/message/12563573#12563573

Dynamic Link and Quicktime error in Adobe After effects cs6.

Hi.
So i have installed this software for a long time and yesterday, when i opened it. it showed the error message:
But i already have Quicktime installed in my PC?!?!, so i click "ok" and then it showed this:
So i just skip ahead, and after that when it initialized the User Interface, it showed this:
after that it showed this:
And then it just crashed and exit.
PLEASE SOMEONE HELPP!!!
btw i'm running a Windows 8 PC with an intel core i3 and 4 Gigs of RAM, also with an intel HD graphics Family GPU.

fixing permissions problem that impedes start of Adobe applications

I have 12 brand new installs of 27" I-Macs, all running Adobe CC. I have several users trying to make simple saves and getting Error -108 Out of Memory errors.

The Mac OS is 10.9.5.
I've already gone into plug ins and Scratch disk preferences and changed the secondary location to the user's hard drive, but this does not solve the problem.
I cannot change the "primary " from Startup, but I did change the secondary to the user's ID instead of None.
These are all brand new Macs in use no more than two weeks.

Windows 7 includes DirectX 11 in its baseline and it is not necessary to install another version of it. Your problems may be caused by the installation of the version of DirectX you installed. Uninstall the one you installed and see if you
still have the errors.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Xsan 1.4.1 and Quicktime Error -108

Similar Messages

Maybe you are looking for