XSan from GigE for Macbook Pro?

There isn't a fibre channel Express/34 card available, so...
How can I connect my Macbook Pro to my XSan?
We have an 8tb XSan with 4 G5 nodes over fibre channel.

You can "tap in" to the system by using the ethernet to piggyback onto an existing "full" x-SAN client. There are many network settings that have to be configured on both the host and client computer to make this work. Unless you have a dedicated server (host) to do this, you would be "sharing" the bandwidth allocated to whichever node you're tapped into. This can result in reduced performance for that node. So, now that you know it's possible, here's some more cautions:
Connecting via ethernet will NOT give you the same kind of bandwidth and performance as a "full" fibre connected client. This WILL work for Off-line RT resolutions, but DV and higher bandwidth is hit or miss.
We use this method for many "non-editors" to access the media on the SAN. Story dept, music dept, legal, producers, etc. can all "see" the off-line RT media and participate in the creative process. This is "read only" access. Writing to the SAN in this manner is a whole 'nuther can o worms.
Mark

Similar Messages

Upgrading to Leopard From Tiger for MacBook Pro

I am currently using a MacBook Pro with the following specs:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version: 1.2f10
Serial Number: W8613HYEVJ0
Sudden Motion Sensor:
State: Enabled
====================================
I have read about the new features in Leopard and would like to have them. At the same time I have read about dissatisfied user reviews about Leopard, mainly from non-Intel based Mac users. So I started this topic hoping to get an answer whether it is worthwhile for me to upgrade to Leopard as soon as possible, or wait til Apple releases more patches for Leopard to iron out the problems?

Sorry about the complexity, but my purpose for the work I did, and the way I did it was to safely upgrade a nicely running Tiger installation to Leopard, with minimum downtime incase things went badly.
The MBP internal drive that Apple uses is only 5400RPM and can't transfer data to boot the operating system or applications as fast as almost any drive in a PowerMac. Even with the ram maxed out, I was not getting all the performance from Tiger that a comparable PowerMac with the same CPU and video could get. Almost all modern PC's and Macs use 7200RPM (or faster) drives which can access and transfer data about 25% faster.
I decided to install Leopard to an external FW800 drive. I used an external drive because I didn't want damage my perfectly good running Tiger installation on the Laptop. I used FW800 because it is presently the fasted port on the Mac that supports booting. eSATA cards are available, but none of them guarantee booting.
I had already tested running applications from both drives by copying the WinXP hard drive file for Parallels and timing the launch from both drives. The external drive was at least 25% faster to boot Windows, and launch other large programs like Photoshop and GoLive.
So, I bought a 500GB newerTechnology miniStack V3 FW800/USB2/eSATA drive. This covers all the bases, Mac and PC, and will be useful for many purposes over the coming years. Who knows, Apple may support booting from eSATA on my next Mac and this drive can run even faster.
I installed Leopard to the new drive a couple of times. First, a clean install with none of my files transferred. This worked perfectly as far as all the hardware compatibility, and applications including TM worked perfectly.
Then I installed Leopard again and imported my applications and settings. This led to a couple of problems that were fixed with a couple of software updates and I fine tuned TM to a degree.
During the next 2 or 3 weeks, I only had to boot back to Tiger on the internal drive 3 times (out of the office).
Once I had a seemingly nice running installation of Leopard with all the updates and Time Machine tested as working well, I decided to clone my old Tiger installation onto an older slower USB 2 drive by using SuperDuper. I booted off of the clone to make sure it was good to go and then set that drive off to the side. It will get used for other projects in a few months, so no money wasted.
I installed Leopard onto the internal drive and imported my settings and files from the external drive. I made sure the system runs and the applications and files I need are available while out of the office.
What I ended up with, is a significantly faster Mac when working in the office with a second monitor helping the workflow, and a fresh, tested Leopard installation running Parallels and WinXP while on the road. When I bring the laptop back in from a field visit I boot from the internal drive and run TM if there has been many changes, then reboot back onto the external drive to do my normal work. I only leave the office with this MBP a day or so a week, and do almost all of my production work at the office on the faster drive.
Win/Win - if you need to spend money for an external drive, get the most out of it you can. In this case, I was also able to ensure that if my MBP is stolen, or hacked while in the field, my personal and financial records would not be on the Laptop.
OK, fingers tired...

Buying games from America for Macbook Pro

I have just purchased a macbook pro (still waiting its arrival) and wish to purchase a few games to kill time on long journeys. Firstly what are the implications of buying games from the US (cost, region settings, import costs if any)??? and secondly if i buy a game that doesn't have a Universal symbol will it still run on the intel based macbook pro??? i only ask because i've got a Quad G5 running on the power pc chip and wish to play games on that too?
thanks
P.S. i want my macbook pro

Games or software in general don't have regional zoning, I bought games in the US many times without any problems.
Regarding Universal Binary, you should have a look there:
http://guides.macrumors.com/UniversalBinaryGames
This is a report of games that are UB, and more importantly, wether a particular non-UB game works or not on Intel-based macs.
This is generally reliable, although I noticed that Star Wars Knights of Old Republic (KOTOR) doesn't work, and the UB patch that should have been available never came...

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

I want to remove the monitor from my 17" Macbook Pro 2008 to use as an external for my Macbook Pro 15" 2012. How can I convert lvds to Thunderbolt and power the monitor?

It's almost impossible. The new iMacs have a Target Display Mode, but it's built to do that. Without ripping your screen out, finding an acceptable power supply, frame, and whatever electronics to convert a Thunderbolt signal to the screen, the cost will be much larger than buying a cheaper HiDef monitor that runs with an HDMI to Thunderbolt cable to your MacBook 15. In fact, you can sell your 17" MBP for a lot of money, unless it's broken or something, buying you a really sweet monitor.
By the way, I found your answer by searching this forum. I would suggest using the search function here in the futuere.

I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air. I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but i

I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air. I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but it didn't work. The files copied fine, but when I tell iTunes on the Air to look at the external drive for the library, it doesn't find anything. What I copied was the entire iTunes Media folder. So, how do I move the necessary iTunes files from my old Pro to a external drive so I can access them from my new Air? Whew!

iTunes- How to move the library to an EHD
After you move the library you need to open iTunes by first depressing the OPTION key then launching iTunes. You will be given a choice of which library to use. This can then be made a permanent change, if you wish, in the Advanced section of iTunes preferences.

What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

All you need is an Ethernet cable.
Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately.

I have just gone from PCM to MacBook Pro retina and would like to now go to imac. Is it worth waiting for retina on imac and when will it arrive

I have just gone from PCM to MacBook Pro retina and would like to now go to imac. Is it worth waiting for retina on imac and when will it arrive

I'm not Klaus but can give an opinion on this part:
As a Mac man yourself do you think that the retina display is worth waiting for?
I'm 65, have used Macs since 1989, and struggle with displays, cataracts, and bifocals. What I've seen of the Retinas in stores is that text size gets sacrificed for image quality. There are quite a few complaints about Retina in the MacBook Pro forums about not being able to increase the size of menu text without it getting fuzzy.
My iMac 27-inch is about a year old and I can set the display res from its default of 2560x1440 to 1920x1080 and everything is sharp. I understand that handy trick will not work for either the older hi-res macbook pros or the Retinas, so I don't expect it for any other Macs.
Speculation on Apple policy and new product releases is actiually not allowed by the Terms of Use around here so I doubt you'll get an answer to the "when" part. Anyone who does answer "when" is either guessing it up or violating a non-disclosure agreement! Apple plays its cards close to its vest and we average users only know "when" when Apple posts the announcement.

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

HT1296 I just bought a new MacBook Pro and moved data over from my old MacBook Pro. Everything seemed fine at first but Outlook 2011 for Mac will not run. It just flashes the Outlook logo briefly and then closes. Help!

Everything seemed to work fine after moving everything over from my old MacBook Pro at first but I cannot run Outlook 2011 for Mac. The logo displays briefly and then the app closes. It never really even gets anything loaded other than the little logo.

Try removing and reinstalling Outlook
Next try posting in a more appropriate forum. this is the iPod touch forum

From where i can buy arabic keyboard for macbook pro 15" ?

from where i can buy arabic keyboard for macbook pro 15" ?

Nobody in these forums represents any store, so you will have to contact them yourself directly. Try
http://www.welovemacs.com/

How do I install windows from USB on Macbook pro 3,1

How do I install windows from USB on Macbook pro 3,1 ?
My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
- My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
After rEFIt I booted and then I got this error:
Starting bootmgr.efi
Error: Unsupported while loading bootmgr.efi
I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
Point: Nothing is wrong with the windows software, and windows runs fine.
I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
rEFIt - Booting Legacy OS
Starting legacy loader
Using load option ´USB´
Error: Not found returned from legacy loader
Error: Not found from LocateDevicePath
(x 9 times)
Error: Load Error while (re)opening our installation volume
The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
(Hey Apple please send out a updated firmware that fix this issue?!)
So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ? Or just run windows on the mac and forget about mac software ? What a stupid solution...

There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
This is 5 page thread, so a little more 'meat' to it:
https://discussions.apple.com/thread/3410900?start=60&tstart=0
And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
What you have here seems to be everything and everyone is excluded unless there is a mac-model device ID string that specifies yes. An unnecessary hurdle.

The normal value of battery capacity for macbook pro

Hi there,
I noticed my battery full charge capacity value is way below the technical specification from Apple.
For macbook pro 15" early 2011 version a 77.5W battery is built-in.
However, so far after 4 cycle, my full charge capacity is 6913mAh.
It seems that I missed something. Though I didn't really notice the initial value when it's brandnew.
Statistically what's the average value of the new battery will be ? around 75W or 7500mAh? Any idea?

Best battery info resource is here:
https://discussions.apple.com/thread/1764220?threadID=1764220

I bought the wrong version as I need it for macbook pro but somehow bought windows...help

I guess I will have to wait until normal office hours. I have no idea why it bought the window version as I did not realize that is what was selected. I hope I can get it exchanged for the photoshop elements 13 for macbook pro retina display. Anyone know if this is an easy switch and one they will do?

When buying HD versions of shows, only the HD copy will automatically download now (probably due to requests from people who don't need/want the SD version and complained about it being forced on them). The SD copy can be downloaded from your purchases area in iTunes, though. On the main iTunes Store page, go to Purchases under the Quick Links and then select TV shows. Click the "Not On This Computer" button. Uncheck the "Download HD when available" box and you should then see the SD copies of the shows and be able to download them.
Regards.

Trapped at transferring data from my old macbook pro to iMac

I got a new iMac yesterday and was trying to transfer data from my old macbook pro to iMac through time machine...
However, I encountered HUGE problems....
Background info: I set up a new account before I transffered my data.
Here is what I did:
I used migration assistance to transfer data. I chose to transfer everything listed on migration assistance from time machine to my new iMac.
After this process was completed, I switched to the transferred account from my newly-set account. Then I realized all the old stuf, (including the software problems + old apps such as microsoft 2008, had been transferred to my new iMac. what I really wanted were all the documents, pictures and music! Therefore I decided to delete this account....
Question 1:
1) I deleted the transferred account, then there was a windown came up asking me if i wanted to keep the home folder, I chose no. then mac started cleaning up and BACKING UP. Since I already had a copy of everything, I stopped the backup process....then this transferred account was deleted. However, everything was still on my mac that I don't have access to (at least I don't know how...) when I checked my mac stroage!
Could anyone tell me how to delete all the files I transferred from time machine to my new iMac?
Question 2:
2) how can i only transfer documents+pictures+music from my old macbook pro to new iMac through time machine without creating a new account? I want all the files to be directly transferred to my newly-set account...
LSS:
Question 1
I tried to transfer everthing from my old macbook pro to new iMac but i realized there were something I didn't want that had been transferred as well. Therefore I deleted this transferred account. However, all the files are still in my mac even if I have deleted that account. Could anyone tell me how I can access to those content and delete them?
Question 2
I just want the documents, music and pictures (from iPhone library) to be directly transferred to the newly-set account on my iMac through time machine (instead to transferred the whole old account to my imac) How can I do it??
THANK YOU FOR YOUR PATIENCE OF GOING THROUGH THIS MESSAGE. I WOULD REALLY APPRECIATE IF YOU COULD GIVE ME A HAND.
btw, you can totally see that i'm not a computer person at all....:( thanks for your help!!

I suggest starting over. Boot into Recovery mode, wipe the HD, reinstall the OS, and, on first boot, use the steps in Pondini's Setup New Mac guide to do the migration.'

How can I export slideshows created in Aperture v3.3.2 from Mid-2009 MacBook Pro-17 to blank DVDs?

(Fifth futile attempt in two hours, before I learned there was a Post webpage – I’m new to ApSuppCom - and after I learned that I am not allowed to update previous content, so I had to back out, make a few changes, and start over.) How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ? (Some other specs: Mac OS Lion 10.7.5; Capacity 499.5 GB; Processor 2.8 GHz Intel Core 2 Duo; Memory 4GB 1067 MHz DDR3; Graphics NVIDIA GeForce 9400M 256MB)
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.” Advisors and Mac Geniuses at local Apple Stores have told me to try Roxio Toast. When I visited the Roxio website, and found numerous other company products, the descriptions all seemed to suggest that most of the apps shown can easily export videos to DVDs, but nothing was said about finished digital slide shows being exported. At future events soon, I hope to be handing out these finished DVDs (free) to the people in them. Any help will be greatly appreciated. A.Z.

How can I export slideshows created in Aperture v3.3.2 (complete with superimposed captions and music tracks) from Mid-2009 MacBook Pro-17 to blank DVDs ?
Aperture cannot burn slideshows to a DVD. It only can export a video of your slideshow.
In Aperture 3 you use the "Export" button in Aperture's slideshow project to render a video to a folder on your disk.
Then you use iDVD or another program to burn a video DVD.
I cannot do a copy (export) without various error messages appearing and the inevitable stoppage occurring. Always with the DVD Video Player final message reading, “Supported disc not available.”
Could you please describe the exact steps that are causing these error messages?
How are you exporting your slideshow from Aperture? Which settings are you using? And how are you importing the video to iDVD or Toast to burn a video DVD?
For more suggestions see Karsten Schlüter's user tip: How to create a video-DVD? (Macs without iDVD)

XSan from GigE for Macbook Pro?

Similar Messages

Maybe you are looking for