Xsane and Photosmart C4280 I can print but don't scan

hey,
after some problems with hplip i'm finally able to print, but when i try to scan i get only this reply
scanimage: open of device hpaio:/usb/Photosmart_C4200_series?serial=MY79LMM3DT04VP failed: Device busy
scanimage -L shows the scanner
device `hpaio:/usb/Photosmart_C4200_series?serial=MY79LMM3DT04VP' is a Hewlett-Packard Photosmart_C4200_series all-in-one
"sane-find-scanner", too
found USB scanner (vendor=0x03f0 [HP], product=0x5c11 [Photosmart C4200 series]) at libusb:005:002
i already tried
#If you want to use this driver with sane: # echo "hpaio" >> /etc/sane.d/dll.conf
but it doesn't work, so what can i do, or what do you need know further?

See my reply here: http://bbs.archlinux.org/viewtopic.php?id=65431
And wasn't hpaio something deprecated?

Similar Messages

HP Photosmart 7510 - I can print but not scan

Hello,
I bought my HP Photosmart a few months ago. It worked fine, and I could print wirelessly from my desktop to the printer, and I could scan from the printer to the desktop computer. In fact, last week I was able to scan.
Today, I wanted to scan something, and I could choose my computer in the list, but got the message that I needed to connect my computer to the printer. I checked what might be wrong, but everything looked okay. I downloaded the scan doctor, and received the message that DeviceSetup.exe could not be found. Which is odd, because when I look in the map, the file is there. I then rebooted the printer, which didn't work. Then I tried to reinstall the drivers on the hp website for my printer, but again got the message that DeviceSetup.exe could not be found.
Next, I removed the printer completely from the computer, reinstalled, and still had the same issue. Except this time in the list to scan to a computer, my desktop is no longer there and I get the message that "on windows, scan to computer will automatically be activated" (I'm translating from Dutch, so in English it could be slightly differently worded).
I retried the scan doctor, and this time I received the message that DeviceSetupLauncher.exe couldn't be found. Again, this is in the directory where it should be. I can see it in the map, but when I click on it, I again get the same notice!
Needless to say, I'm at a loss as to what I could do to fix it. The file I need is right there, but my computer acts like it's not. I'm a student and really need my printer. So I'd be very grateful for any advice on how to fix this problem!
Thanks in advance!

Hi,
For Windows 7 and Windows 8 machine, please keep the printer connected, download and run the following tool:
http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe
Can you see HP Scan when click Start (Windows 7) ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MX710 - I can print but I cannot scan

I just got a new Mac and cannot figure out how to set up scanning. I am using MP Navigator EX to scan and it does not recognize the scanner. Wireless printing is working just fine though.
In the Printers/Scanners tab, it shows the Canon MX710, but hangs there when I try to scan from that application.
I am pretty sure it is an "order of installation of drivers" thing, but I can't seem to figure this out.
Any assistance is appreciated.
Solved!
Go to Solution.

I found the solution:
In the MP Navigator MX software, click on preferences and in the Product Name drop down, selecting 'MX710 series Network', rather than 'MX710 series'.

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

Just purchased a office jet 6500A Plus so that I can print from my iPhone and iPad. I can print form my iPhone but my iPad 2 tells me there is no air printer available. Why does one device recognize the air printer but the other device does not?

I have the 6500A without plus and it is with a LAN cable connected with my Router.
First make sure you have the latest printer firmware installed.
Next restart the printer and the Router.
I had the same. Problem but it went away after rebooting the Router.

I just hooked up my Canon MP830 printer/scanner/fax to my MAC and can print but can't scan. Anyone out there know what to do with this?

I just hooked up my Canon MP830 printer/scanner/fax to my MAC and can print but can't scan. Anyone out there know what to do with this?

Have you downloaded the approriate Snow Leopard drivers for that printer? Make sure you get the appropriate and latest MP Navigator, as you start scans from the computer, not the all-in-one. Get them from http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp830#DriversAndSoftware

HT1338 I have updated my new MacBook Pro for HP Photosmart All-in-One, but it still will not scan - it will print, but will not scan. How can I fix this?

I have installed the updates for my HP Photosmart All-in-One c309a. It prints, but will not scan. Tells me to update - I did that, but still won't scan. Any suggestions to make the scanner work?
This all worked perfectly with my old 2008 MacBook Pro.

Have you tried scanning from Image Capture or Preview?
A current driver is shown to be available for Mavericks (auto-downloaded):
http://support.apple.com/kb/ht3669#HP
But many people have found that manufacturer scanning control software doesn't work. They have to use the Apple-provided software.

I can print but can't scan

I have a HP Officejet Pro 8500A. I can print but I can't scan. I am running windows 7. I am attempting to scn by clicking on the icon. When I click the icon, I get this error message: "The HP Officejet Pro 8500 A 910 was not found". Please help.

MurryLaw
Welcome to the HP Community Forum.
Icons are nothing more than links to programs -- and a link is a pointer, not an actual program.
It may be that the printer software is not working properly or that the Icon you are using is just not connected, that is, pointing to -- anything useful.
You can perhaps correct the whole mess by installing (reinstalling) the Full Feature Software for the printer. The installation process may take care of the broken Icon and whatever else is going on elsewhere that is keeping the scanning function from working properly.
General Instructions to Install the Printer Software
Reminder:
In most cases, the Solution Center has been replaced by the Printer Assistant.
The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
Windows Operating System:
Create Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Officejet Pro 8500A e-All-in-One Printer series - A910
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
After the initial installation is complete and working, check / install Category - Update
There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

HT204053 Hello, I want to change my ID but I can't.i go to my iPad store and sign in my new ID but don't accept.

I want to change my ID but I can't.i go to my iPad store and sign in my new ID but don't accept

I find that the easiest way to change the account you are using on your mobile device is to scroll down to the bottom of the iTunes Store or App Store on the device and tap the Apple ID button. Then:
- To sign out, or to sign in to a different account, tap the Sign Out button.
- To sign back in, tap the Sign In button, then tap either Use Existing Apple ID or Create New Apple ID, and follow the on-screen instructions from there. I hope this helps.

Ok i work at a military base and there were iPod touch's given out to some units and I have found one and would like to return it but don't know the owner so is there a way to track a name with the serial number?

Ok i work at a military base and there were iPod touch's given out to some units and I have found one and would like to return it but don't know the owner so is there a way to track a name with the serial number? Or how can I find out who owns it?

No. Turn it into the military police.

I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
Power down the system and restart with the drive connected, go to DU and see it it is seen.

HT201210 What To Do When You Restore Your 1st Gen. iPod And iTunes Says It Can Not Be Done Due Too An Unknown Error (1)

What To Do When You Restore Your 1st Gen. iPod And iTunes Says It Can Not Be Done Due Too An Unknown Error (1)

ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I've bought books and now want to buy another but don´t accept my credit card details, why?

I've bought books and now want to buy another but don´t accept my credit card details, why?

Nobody here could possibly know why your credit card is not being accepted. We don't work for Apple, we are just other users voulnteering out time to help.
Did you get any message from when you attempted to make the purchase? Did you review your credit card details in your iTunes account? Did your crest card expire and you forgot about it?

I own CS5 and want to upgrade to CS6 but don't want to pay a monthly fee for the Cloud. Is it possible to purchase a non-Cloud upgrade? If so, where and how much?

I own CS5 and want to upgrade to CS6 but don't want to pay a monthly fee for the Cloud. Is it possible to purchase a non-Cloud upgrade? If so, where and how much?

Creative Suite 6
Mylenium

In Photoshop Elements 12 I can print but not scan..error message "Cannot find Wia compliant device". It can find the device or else it wouldn't print. How do I get it to scan??

I have tried everything to get the program to see my printer. By reinstalling divice drivers for printer to reinstalling program several times. Still I can print from my printer but not scan. Any help would be appreciated.

Hi,
Thanks for the update.
If you can scan with the HP software then at least we know the system can see the scanner.
Can you try the organizer to see if that works any differently. Once you load the organizer, go to the Edit menu and select Preferences -> Scanner - see if that sees it.
Since you are on Elements 12, you still have the twain option available to try. See the following document which describes moving the twain driver.
https://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html
Brian

After updating to WIndows 10, I can print but not scan with my HP 2210 all in one

I updated to Windows 10, and since then I'm able to print but not scan with my HP 2210 All-in-one printer. I've tried downloading the software updates but nothing seems to work. Any suggestions

Hi , and I see you are both having trouble scanning after upgrading to Windows 10, and I may be able to help. Most products do have updated software available on HP's support website for Windows 10. I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too. HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive. Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8
(It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type Paint.Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan. Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

Xsane and Photosmart C4280 I can print but don't scan

Similar Messages

Maybe you are looking for