Xscreensaver daemon not starting on startup w/KDE

hope this is the place to post this!
I have tried putting xscreensaver in my daemon list in rc.conf.
I have put xscreensaver -no-splash & in my ~/.xinitrc before wm starts.
but, I have to manually start the daemon. So, obviously I'm doing something wrong. Could someone point out how to have the daemon start automatically?
I'm currently using kde 3.5.5 - all packages are current.
Also, I do not have screensavers enabled in KDE.
Thanks,
McRae

[mcrae@blackbox ~]$ desktop-file-validate /home/ mcrae/.kde/Autostart/xscreensaver.desktop
/home/mcrae/.kde/Autostart/xscreensaver.desktop: error: file doesn't contain a "Desktop Entry" s ection
This is the output? I'm sure the answer is right here but I'm not sure what to do with the output... :oops:

Similar Messages

Msg regarding "Dgraph did not start in startup timeout of 120 seconds"

Hi All,
Baseline update failed with following error message.
"WARNING: Component 'Dgraph1' did not start in startup timeout of 120 seconds.
SEVERE: Server component 'Dgraph1' did not start in the allotted startup time.Refer to component logs in /usr/local/endeca/EndAppR7/./logs/dgraphs/Dgraph1 on host MDEXHost1.
Occurred while executing line 5 of valid BeanShell script:
2|
3| DgraphCluster.cleanDirs();
4| DgraphCluster.copyIndexToDgraphServers();
5| DgraphCluster.applyIndex();
6|
7|
I've checked the dgraph1 logs and i don't see any difference than usual logs - like what i had yesterday.
"all dgraph transactions completed"
"Shutting down dgraph (pid=17398)"
It had been running well as daily scheduled job since last 1 week.
it has very small data to be indexed, just few MB.
I've checked main application log, dgraphs logs, forge logs just in case, and process.0.log in PlatformServices. I don't see any useful detailed information to find out what causes this issue.
And there was no locked flag on the application.
to resolve this issue, i just started the Dgraph1 from Workbench and run the baseline update to make sure if it does not fail again. it ran well.
But i'm wondering why... it happened.
Can anyone kindly tell me the possible cause or where i can find out the root cause?
Thanks,
Edited by: julia on Oct 31, 2012 11:06 AM

Julia,
After you issue the start command (either as part of a baseline update or with a runcommand.sh Dgraph1 start), you should see your Dgraph1.log file (in [your_app_folder]/data/dgraphs/Dgraph1/) get updated with information related to dgraph startup.
You should look there to see if your dgraph is actually starting in the 2 minute timeframe, the dgraph is up when you see the following line:
pid=[SOME_NUMBER] listening for HTTP connections on port [SOME_NUMBER] at [SOME_DATE_TIME]
If you don't see that, there is either an error starting the dgraph (you should see that in the same log file) or an error sending the command to start the dgraph (port 8888 not open, EAC Agent not running on the MDEX server, etc.).
If you do see a successful message starting the dgraph, it's likely that the EAC Central Server (i.e. likely where you ran the command) was not able to determine that the dgraph started. It usually does this by issuing an admin?op=ping to the dgraph port so it's likely that port 15000 (or whereever your dgraph is running) is blocked between those two servers.
Hopefully, that's enough for you to go on.
Patrick

Grid on a standalone server Cluster daemons not starting during server boot

Hi!I have installed Oracle Grid on a standalone server and setup Oracle db 11.2.0.2 on Oracle Linux 6.2 64 bit server.When I reoot the server and run crs_stat -t,several daemons havent started thus the ASM and db instances are also down as below
Name Type Target State Host
ora.DATA.dg ora....up.type OFFLINE OFFLINE
ora.FRADG.dg ora....up.type OFFLINE OFFLINE
ora....ER.lsnr ora....er.type ONLINE ONLINE amldb01dc
ora.amldb.db ora....se.type OFFLINE OFFLINE
ora.asm ora.asm.type OFFLINE OFFLINE
ora.cssd ora.cssd.type ONLINE OFFLINE
ora.diskmon ora....on.type ONLINE OFFLINE
ora.evmd ora.evm.type ONLINE ONLINE amldb01dc
ora.ons ora.ons.type OFFLINE OFFLINE
I am forced to manually start the daemons via command crsctl start resource -all then I manually start the ASM and db instances.
Yet when I run the commands
crsctl config has
CRS-4622: Oracle High Availability Services autostart is enabled.
crsctl check has
CRS-4638: Oracle High Availability Services is online.
Thus I would assume the daemons would start automatically during boot.
How can I resolve this?

crstcl check crs seems not to be applicable to single instance but for RAC,since I have a single instance db,the output of the command is as below
crsctl check crs
Parse error:
'crs' is an invalid argument
Brief usage:
crsctl check has
Check status of OHAS.
There is no crsd.log in path /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/crsd.The output of crs_stat -t is already posted in initial post and output of entire alert log is as below
2012-07-03 16:18:35.975
[client(8182)]CRS-2101:The OLR was formatted using version 3.
2012-07-03 16:18:36.471
[client(8218)]CRS-1001:The OCR was formatted using version 3.
[client(8293)]CRS-10001:CRS-6021: No msg for has:crs-6021 [l][unlimited]
[client(8294)]CRS-10001:CRS-6021: No msg for has:crs-6021 [n][65536]
2012-07-03 16:18:42.528
[ohasd(8291)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-03 16:18:42.538
[ohasd(8291)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-03 16:18:51.271
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:18:52.299
[evmd(8479)]CRS-1401:EVMD started on node amldb01dc.
[client(8520)]CRS-10001:03-Jul-12 16:18 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
[client(8889)]CRS-10001:03-Jul-12 16:19 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
2012-07-03 16:19:22.600
[cssd(9014)]CRS-1713:CSSD daemon is started in local-only mode
2012-07-03 16:19:31.128
[cssd(9014)]CRS-1601:CSSD Reconfiguration complete. Active nodes are amldb01dc .
[client(10038)]CRS-10001:03-Jul-12 16:25 ACFS-9459: ADVM/ACFS is not supported on this OS version: 'error: file /etc/SuSE-release: No such file or directory
2012-07-03 16:34:13.791
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5010:Update of configuration file "/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/oratab.bak.amldb01dc" failed: details at "(:CLSN00011:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:37:39.674
[ohasd(8291)]CRS-2765:Resource 'ora.DATA.dg' has failed on server 'amldb01dc'.
2012-07-03 16:37:43.636
[ohasd(8291)]CRS-2767:Resource state recovery not attempted for 'ora.asm' as its target state is OFFLINE
2012-07-03 16:38:06.905
[cssd(9014)]CRS-1603:CSSD on node amldb01dc shutdown by user.
2012-07-03 16:38:07.006
[cssd(9014)]CRS-1660:The CSS daemon shutdown has completed
2012-07-03 16:38:10.118
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(8465)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:42:09.578
[ohasd(4827)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-03 16:42:09.649
[ohasd(4827)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-03 16:42:10.437
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:2:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:10.667
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-03 16:42:40.463
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:40.464
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:54.641
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-03 16:42:55.675
[evmd(5060)]CRS-1401:EVMD started on node amldb01dc.
2012-07-03 16:54:35.840
[cssd(5256)]CRS-1713:CSSD daemon is started in local-only mode
2012-07-03 16:54:44.396
[cssd(5256)]CRS-1601:CSSD Reconfiguration complete. Active nodes are amldb01dc .
2012-07-03 16:54:56.832
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5010:Update of configuration file "/u01/app/oracle/product/11.2.0/dbhome_1/srvm/admin/oratab.bak.amldb01dc" failed: details at "(:CLSN00011:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:03:53.530
[ohasd(4827)]CRS-2767:Resource state recovery not attempted for 'ora.asm' as its target state is OFFLINE
2012-07-04 10:04:02.701
[cssd(5256)]CRS-1603:CSSD on node amldb01dc shutdown by user.
2012-07-04 10:04:02.809
[cssd(5256)]CRS-1660:The CSS daemon shutdown has completed
2012-07-04 10:04:03.008
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5046)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:07:48.492
[ohasd(4698)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:07:48.534
[ohasd(4698)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:07:49.059
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:07:49.192
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:08:19.085
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:19.093
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4946)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:33.278
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5053)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:08:34.319
[evmd(5069)]CRS-1401:EVMD started on node amldb01dc.
2012-07-04 10:27:13.716
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5053)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:30:57.260
[ohasd(4619)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:30:57.280
[ohasd(4619)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:30:57.660
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:30:57.784
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:31:27.685
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:27.685
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4992)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:41.868
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5168)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:31:42.916
[evmd(5184)]CRS-1401:EVMD started on node amldb01dc.
2012-07-04 10:39:17.166
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5168)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:43:01.219
[ohasd(4575)]CRS-2112:The OLR service started on node amldb01dc.
2012-07-04 10:43:01.240
[ohasd(4575)]CRS-1301:Oracle High Availability Service started on node amldb01dc.
2012-07-04 10:43:01.643
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:1:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:01.781
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5016:Process "/u01/app/oracle/product/11.2.0/grid/bin/lsnrctl" spawned by agent "/u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin" for action "check" failed: details at "(:CLSN00010:)" in "/u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log"
2012-07-04 10:43:31.680
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5818:Aborted command 'check for resource: ora.FRADG.dg amldb01dc 1' for resource 'ora.FRADG.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:31.680
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(4971)]CRS-5818:Aborted command 'check for resource: ora.DATA.dg amldb01dc 1' for resource 'ora.DATA.dg'. Details at (:CRSAGF00113:) {0:0:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:45.864
[u01/app/oracle/product/11.2.0/grid/bin/oraagent.bin(5120)]CRS-5815:Agent '/u01/app/oracle/product/11.2.0/grid/bin/oraagent_grid' could not find any base type entry points for type 'ora.daemon.type'. Details at (:CRSAGF00108:) {0:4:2} in /u01/app/oracle/product/11.2.0/grid/log/amldb01dc/agent/ohasd/oraagent_grid/oraagent_grid.log.
2012-07-04 10:43:46.915
[evmd(5136)]CRS-1401:EVMD started on node amldb01dc.

Bluetooth daemon not starting

Hi,
Not so much of a problem but, bluetooth daemon does not start on boot up.... sure I have it in daemons [no @!] but when you run hcitool scan you get no device found..
Is there a better place to start /etc/rc.d/bluetooth? ir rc.local maybe ?
thanks
MrG

we havent resolved the issues we have with RDA.
First when we opened a msg with SAP they asked to apply these notes:
1048864 - RDA daemon does not close empty requests
1042790 - P14: Real-time: QM action for real-time PSA request
Which fixed most of issues and but the delta queue wasnt being deleted in source system even after the data is loaded and request closed. Now they asked us to apply other note 1089041 - RDA InfoPackage does not delete delta queue which is supposed to be part of SP16. And guess what we patched our system with SP16 and Now the RDA doesnt work at all :). The RDA is active but the daemon never wakes up - So opened anyother note with SAP. And pretty soon I hope I will be making good friends with the SAP consultant I'm working with all the messages going back and forth.
Let us know if you found a magical way to make ur RDA work. I guess we decided to hold on RDA till starts behaving stable (may be SP53- you never know). And I would personally like to be able to close the request in 30mins and not 1hr default it has. I tried playing around with the FM's - no luck.

Daemon not starting

a) Created DTP for RDA..
b) Created infopackage by clicking RDA and assigned ..
c) Created Daemon
d) asssigned Damon to the package and atttached DTP..
e) when said Start all infopackages from the Daemon.... it is not starting and the request is going to Red.
Inititally it was green after some time., it has become red and now it is inactive. Can anyone tell me the reason.. I deleted everything and tried to created once again DTP and infopackage and Daemon.. but no use...
Eagerly waiting for reply

we havent resolved the issues we have with RDA.
First when we opened a msg with SAP they asked to apply these notes:
1048864 - RDA daemon does not close empty requests
1042790 - P14: Real-time: QM action for real-time PSA request
Which fixed most of issues and but the delta queue wasnt being deleted in source system even after the data is loaded and request closed. Now they asked us to apply other note 1089041 - RDA InfoPackage does not delete delta queue which is supposed to be part of SP16. And guess what we patched our system with SP16 and Now the RDA doesnt work at all :). The RDA is active but the daemon never wakes up - So opened anyother note with SAP. And pretty soon I hope I will be making good friends with the SAP consultant I'm working with all the messages going back and forth.
Let us know if you found a magical way to make ur RDA work. I guess we decided to hold on RDA till starts behaving stable (may be SP53- you never know). And I would personally like to be able to close the request in 30mins and not 1hr default it has. I tried playing around with the FM's - no luck.

[Resolved] DAEMONS not starting

No daemons are starting even though my rc.conf is configured correctly. I am also in runlevel 3.
Anybody know what the problem is?
[root@pollux etc]# cat rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MODULES=()
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME="pollux"
interface=
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
Daemons=(syslog-ng dbus crond alsa !network net-profiles netfs sshd ntpd !hwclock)
[root@pollux etc]# runlevel
N 3
[root@pollux etc]# rc.d list
[STOPPED][ ] adsl
[STOPPED][ ] alsa
[STOPPED][ ] avahi-daemon
[STOPPED][ ] avahi-dnsconfd
[STOPPED][ ] crond
[STOPPED][ ] dbus
[STOPPED][ ] derby-network-server
[STOPPED][ ] fam
[STOPPED][ ] fluidsynth
[STOPPED][ ] ftpd
[STOPPED][ ] git-daemon
[STOPPED][ ] gpm
[STOPPED][ ] heimdal-kdc
[STOPPED][ ] hwclock
[STOPPED][ ] irexecd
[STOPPED][ ] kadmind
[STOPPED][ ] kpasswd
[STOPPED][ ] krb5-kadmind
[STOPPED][ ] krb5-kdc
[STOPPED][ ] krb5-kpropd
[STOPPED][ ] lircd
[STOPPED][ ] lircmd
[STOPPED][ ] mdadm
[STOPPED][ ] net-auto-wired
[STOPPED][ ] net-auto-wireless
[STOPPED][ ] netfs
[STOPPED][ ] net-profiles
[STOPPED][ ] net-rename
[STOPPED][ ] network
[STOPPED][ ] nscd
[STOPPED][ ] ntpd
[STOPPED][ ] ntpdate
[STOPPED][ ] ppp
[STOPPED][ ] redis
[STOPPED][ ] rpcbind
[STOPPED][ ] snmpd
[STOPPED][ ] sshd
[STOPPED][ ] syslog-ng
[STOPPED][ ] tftpd
Last edited by ecallen (2012-07-31 02:03:46)

Please mark your thread a solved and, while you are editing your original post, enclose your code in the correct tags:
https://wiki.archlinux.org/index.php/Fo … s_and_Code

POP3 and IMAP daemons not starting?

Ahoy, my mail server's been running fine for months now, but this morning it wasn't working.
On closer inspection, Server Admin says that POP and IMAP are disabled. In the settings they are definatly enabled.
I tried restarting the server, and I also updated to 10.4.8, but still nothing.
Does anyone know how I can get an error log or something that might tell me why they're not starting?
thanks!

Fixed it.
Apologies for the false alarm. I looked at the logs and config and thought 'This looks messy. I need to look cool in front of these guys, I should clear this up.'
So I restored the default main.cf file and reconfigured my mail server from scratch, and now it's working...
Thanks anyway!

Launchd daemon not starting correctly on launch

Hi All,
I have a script that I like to have run anytime my wireless network changes. The script needs to be run under sudo, so I created a daemon inside of /Library/LaunchDaemons .
My plist file looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Disabled</key>
               <false/>
          <key>Label</key>
               <string>my.plist.name</string>
          <key>ProgramArguments</key>
               <array>
                              <string>/path/to/script/to/run.sh</string>
               </array>
          <key>WatchPaths</key>
               <array>
                              <string>/Library/Preferences/SystemConfiguration/com.apple.airport.pr eferences.plist</string>
               </array>
</dict>
</plist>
So here's where the oddness starts happening. When I start up my computer, launchctl tells me that this daemon is loaded. (I run sudo launchctl list and it's there). However, the script does not run when it should.
However, if I manually unload and then load the plist using the launchctl command then everything works completely fine.
So the question is, why does it work when I load it manually, but not work when the system loads it on startup?
Thanks,
Q

No suspicious message in the console. When I sudo launchctl list it shows up with a 0 in the second field.
The only thing I can find in doing some google-ing is this:
https://managingosx.wordpress.com/2006/05/10/launchd-gotcha/
Which seems to imply that a launch daemon that is watching a file will fail to work if that file doesn't exist at all times. However, I would think that /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist should always exist. So I'm still perplexed.
Right now I have a seomwhat convoluted system set up as the following:
My launch daemon (that needs to run as root) is set to watch a folder ~/random/
Then I have a launch agent which successfully watches for changes in /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist and when it sees them touches a file in ~/random/.
The launch daemon then deletes that file and successfully runs the script I want it to run.
It seems weird/odd/annoying to have to set up a this double-headed process just to do something simple like this, so I'm open to suggestions as to what is going on.

NetworkManager daemon not starting since systemd 208-2 upgrade

Hi, Since i updated my system to systemd 208-2 NetworkManager fails to start at boot.
I haver this behaviour both with the LTS kernel and the 3.7.9.2 kernel.
I use only a wifi card, Atheros Ar9271. However even when the card is not connected Network Manager fails to start.
I have downgraded to 208-1 as a workaround for the moment.
has anyone similar behaviour?
Should i repor a bug ??
Here are some logs :
systemctl status Network.Manager.service :
NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled)
Active: failed (Result: exit-code) since lun 2013-10-28 01:02:34 CST; 1min 0s ago
Process: 291 ExecStart=/usr/bin/NetworkManager --no-daemon (code=exited, status=127)
Main PID: 291 (code=exited, status=127)
CGroup: /system.slice/NetworkManager.service
journalctl:
oct 28 01:02:46 archlinux systemd[333]: Failed to open private bus conne...y
oct 28 01:02:46 archlinux systemd[333]: Mounted /sys/kernel/config.
oct 28 01:02:46 archlinux systemd[333]: Stopped target Sound Card.
oct 28 01:02:46 archlinux systemd[333]: Starting Default.
oct 28 01:02:46 archlinux systemd[333]: Reached target Default.
oct 28 01:02:46 archlinux systemd[333]: Startup finished in 222ms.
Edit: added logs
Last edited by hydrosIII (2013-10-28 07:09:03)

Hmm, I still seem to have this issue. For me, it's random. Most of the time I start my computer and I have no internet. At boot it tries to start internet on eth0 all the time.
Every boot I run "ifconfig" to see if I got internet or not. Most often I do not have any, and running "dhcpcd eth0" will not do anything, at this time I am required to run "dhcpcd eth1".
Rarely, I boot my computer, run "ifconfig", and see that I got a local IP address. But that happens rarely. I am using 208-3.

Mac does not start -your startup disk is full

Hi,
When i turn on my macbook pro 13" (snow leopard) i get the following message:
"your startup disk is full
you need to make more space available on your startup disk by deleting files"
then i log on my account and the screen remains with the mac pink sky without any items.
i restarted and connected the mac to another mac with firewire a deleted some files to get free space.
I turn on again and i get the same message not being able to start the mac.
Is there any solution for that??
best regards

Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751

Adsl daemon not starting

I have pppoe connection, in the past worked very well, I 've recently replaced an antique motherboard 10 years old with a 775 socket Asrock, chipset G41 that has Realtek 8102E/8103E on-board lan and I have since then always had to manually do sudo /etc/rc.d/adsl start
That's when I have adsl backgrounded in rc.conf. I mention that pppoe is configured correctly like always did for some years now. It's a real pain starting system and when someone in the family wants to surf the web I have to come and put a daemon to work.
Can anybody help me?
Last edited by innn (2011-07-23 19:27:52)

ok, this is from /var/log/daemon.log
Jul 26 18:41:46 localhost [ 1.090100] udevd[48]: starting version 171
Jul 26 18:41:46 localhost [ 3.435828] udevd[235]: starting version 171
Jul 26 18:41:48 localhost pppd[679]: pppd 2.4.5 started by root, uid 0
Jul 26 18:41:48 localhost pppd[679]: Using interface ppp0
Jul 26 18:41:48 localhost pppd[679]: Connect: ppp0 <--> /dev/pts/0
Jul 26 18:41:49 localhost dbus[630]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Jul 26 18:41:50 localhost dbus[630]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Jul 26 18:41:50 localhost polkitd[798]: started daemon version 0.101 using authority implementation `local' version `0.101'
Jul 26 18:41:50 localhost dbus[630]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jul 26 18:41:50 localhost dbus[630]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jul 26 18:42:19 localhost pppd[679]: LCP: timeout sending Config-Requests
Jul 26 18:42:19 localhost pppd[679]: Connection terminated.
Jul 26 18:42:19 localhost pppd[679]: Modem hangup
Jul 26 18:42:21 localhost pppd[1184]: pppd 2.4.5 started by root, uid 0
Jul 26 18:42:21 localhost pppd[1184]: Using interface ppp0
Jul 26 18:42:21 localhost pppd[1184]: Connect: ppp0 <--> /dev/pts/2
Jul 26 18:42:21 localhost pppoe[1187]: PADS: Service-Name: 'ftth'
Jul 26 18:42:21 localhost pppoe[1187]: PPP session is 115 (0x73)
Jul 26 18:42:21 localhost pppd[1184]: PAP authentication succeeded
Jul 26 18:42:21 localhost pppd[1184]: Cannot determine ethernet address for proxy ARP
Jul 26 18:42:21 localhost pppd[1184]: local IP address 79.114.206.165
Jul 26 18:42:21 localhost pppd[1184]: remote IP address 10.0.0.1
Jul 26 18:42:21 localhost pppd[1184]: primary DNS address 213.154.124.1
Jul 26 18:42:21 localhost pppd[1184]: secondary DNS address 193.231.252.1
Jul 26 18:42:23 localhost pppoe[689]: Timeout waiting for PADO packets
Jul 26 18:42:23 localhost pppd[679]: Exit.
messages.log
Jul 26 18:41:47 localhost kernel: [ 10.999453] r8101: eth0: link up
Jul 26 18:41:47 localhost kernel: [ 11.065529] PPP generic driver version 2.4.2
Jul 26 18:41:48 localhost pppd[679]: pppd 2.4.5 started by root, uid 0
Jul 26 18:41:48 localhost pppd[679]: Using interface ppp0
Jul 26 18:41:48 localhost pppd[679]: Connect: ppp0 <--> /dev/pts/0
Jul 26 18:41:49 localhost dbus[630]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Jul 26 18:41:50 localhost dbus[630]: [system] Activating service name='org.freedesktop.PolicyKit1' (using servicehelper)
Jul 26 18:41:50 localhost polkitd[798]: started daemon version 0.101 using authority implementation `local' version `0.101'
Jul 26 18:41:50 localhost dbus[630]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jul 26 18:41:50 localhost dbus[630]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jul 26 18:41:58 localhost kernel: [ 21.941423] chromium-sandbo (894): /proc/892/oom_adj is deprecated, please use /proc/892/oom_score_adj instead.
Jul 26 18:42:19 localhost pppd[679]: LCP: timeout sending Config-Requests
Jul 26 18:42:19 localhost pppd[679]: Connection terminated.
Jul 26 18:42:19 localhost pppd[679]: Modem hangup
Jul 26 18:42:21 localhost pppd[1184]: pppd 2.4.5 started by root, uid 0
Jul 26 18:42:21 localhost pppd[1184]: Using interface ppp0
Jul 26 18:42:21 localhost pppd[1184]: Connect: ppp0 <--> /dev/pts/2
Jul 26 18:42:21 localhost pppoe[1187]: PPP session is 115 (0x73)
Jul 26 18:42:21 localhost pppd[1184]: PAP authentication succeeded
Jul 26 18:42:21 localhost kernel: [ 44.479616] PPP BSD Compression module registered
Jul 26 18:42:21 localhost pppd[1184]: local IP address 79.114.206.165
Jul 26 18:42:21 localhost pppd[1184]: remote IP address 10.0.0.1
Jul 26 18:42:21 localhost pppd[1184]: primary DNS address 213.154.124.1
Jul 26 18:42:21 localhost pppd[1184]: secondary DNS address 193.231.252.1
Jul 26 18:42:23 localhost pppd[679]: Exit.
errors.log
Jul 26 18:42:21 localhost pppd[1184]: Cannot determine ethernet address for proxy ARP
Jul 26 18:42:23 localhost pppoe[689]: Timeout waiting for PADO packets
kernel.log
Jul 26 18:41:47 localhost kernel: [ 10.999443] r8101 0000:01:00.0: Not Support EEE
Jul 26 18:41:47 localhost kernel: [ 10.999453] r8101: eth0: link up
Jul 26 18:41:47 localhost kernel: [ 11.065529] PPP generic driver version 2.4.2
Jul 26 18:41:58 localhost kernel: [ 21.941423] chromium-sandbo (894): /proc/892/oom_adj is deprecated, please use /proc/892/oom_score_adj instead.
Jul 26 18:42:21 localhost kernel: [ 44.479616] PPP BSD Compression module registered
basically these 3 or 4 lines I found in dmesg also

Startup disk full and mac will not start up, startup disk full and mac will not start up

my startup disk is full, and now my macboom air will not startup

I finally figured out how to start up the macbook in "safe' mode wchich allowed me to boot up and delete a bunch of extra files, then install an external drive to transfer everything over. Once i set up that drive, it works like a champ. kinda annoying thta you have to pay the kind of money that apple wants for these things just to go out and have to spend more on an external...but whatever. anyway, to start in safe mode follow this link...(sorry, i tried to cpoy and paste, but i couldnt with this stupid reply program...
http://support.apple.com/kb/ht1445
hope this helps.

Oracle Not Starting : error ORA-19809

Hello All,
I was trying to start the 11gr2 database and getting the following error. Please can any one give some advise ? I manually deleted all archive logs using OS command but still i get the
same error when i try to start the database.
ORA-19815: WARNING: db_recovery_file_dest_size of 4039114752 bytes is 100.00% used, a nd has 0 remaining bytes available.
You have following choices to free up space from recovery area:
1. Consider changing RMAN RETENTION POLICY. If you are using Data Guard,
then consider changing RMAN ARCHIVELOG DELETION POLICY.
2. Back up files to tertiary device such as tape using RMAN
BACKUP RECOVERY AREA command.
3. Add disk space and increase db_recovery_file_dest_size parameter to
reflect the new space.
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Errors in file /u01/app/oracle/diag/rdbms/orcl/DB11G/trace/DB11G_ora_2921.trc:
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 50629632 bytes disk space from 4039114752 limit
ARCH: Error 19809 Creating archive log file to '/u01/app/oracle/flash_recovery_area/O RCL/archivelog/2012_02_18/o1_mf_1_95_%u_.arc'
2012-02-18 15:58:55.099000 -05:00
ARC3: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARCH: Archival stopped, error occurred. Will continue retrying
ORACLE Instance DB11G - Archival Error
ORA-16038: log 3 sequence# 96 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_3_7kp sygwt_.log'
ORA-00312: online log 3 thread 1: '/u01/app/oracle/flash_recovery_area/ORCL/onlinelog /o1_mf_3_7kpsyj6n_.log'
Errors in file /u01/app/oracle/diag/rdbms/orcl/DB11G/trace/DB11G_arc2_2927.trc:
ORA-16038: log 3 sequence# 96 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 3 thread 1: '/u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_3_7kp sygwt_.log'
ORA-00312: online log 3 thread 1: '/u01/app/oracle/flash_recovery_area/ORCL/onlinelog /o1_mf_3_7kpsyj6n_.log'
Errors in file /u01/app/oracle/diag/rdbms/orcl/DB11G/trace/DB11G_ora_2921.trc:
ORA-16038: log 2 sequence# 95 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/ORCL/onlinelog/o1_mf_2_7kp sydnm_.log'
ORA-00312: online log 2 thread 1: '/u01/app/oracle/flash_recovery_area/ORCL/onlinelog /o1_mf_2_7kpsyfp7_.log'
USER (ospid: 2921): terminating the instance due to error 16038
2012-02-18 15:58:56.976000 -05:00
Instance terminated by USER, pid = 2921

Rama Krishna wrote:
I think database need to be started before you do any thing with RMAN my problem is database not even starting!You told SB that you had done "option 4":
4. Delete unnecessary files using RMAN DELETE command. If an operating
system command was used to delete files, then use RMAN CROSSCHECK and
DELETE EXPIRED commands.
Oh well. So you " *think* database need to be started before you do any thing with RMAN"
Did you try?
We don't need the database to be open for this, just have the control file mounted:
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@vmlnxsrv01 ~]$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Sat Feb 18 16:21:25 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area     849530880 bytes
Fixed Size                     1339824 bytes
Variable Size                578817616 bytes
Database Buffers             264241152 bytes
Redo Buffers                   5132288 bytes
RMAN> crosscheck archivelog all;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
validation succeeded for archived log
archived log file name=/orafra/ORCL/archivelog/2012_01_15/o1_mf_1_66_7k6t71k9_.arc RECID=3 STAMP=772653704
<snip>
archived log file name=/orafra/ORCL/archivelog/2012_02_18/o1_mf_1_80_7n06cfq0_.arc RECID=17 STAMP=775582480
Crosschecked 15 objects
RMAN> exit
Recovery Manager complete.
[oracle@vmlnxsrv01 ~]$ exit
logoutEdited by: EdStevens on Feb 18, 2012 4:32 PM

Oracle 11g database instance will not start

I have an oracle 11g instance running on 64bit windows server 2008. The instance will not start:
SQL> startup
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 4526317568 bytes
Fixed Size 2262648 bytes
Variable Size 2566916488 bytes
Database Buffers 1946157056 bytes
Redo Buffers 10981376 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 6496
Session ID: 107 Serial number: 3
After that, the oracle service for the instance stops.
It will startup with nomount and I can mount it with no issue, but as soon as I try: alter database open; it fails.
I ran a validate in rman, and no error were found.
How do I troubleshoot this?

Ok, thanks to all for pointers on finding the alert log. Found it. here's the relevant section, I believe:
ARCH: Error 19809 Creating archive log file to 'D:\ORADATA\FASTRECOVERY\....\ARCHIVELOG\2012_11_07\O1_MF_1_2456_%U_.ARC'
Errors in file C:\APP\diag\rdbms\....\trace\ukgb01_ora_3308.trc:
ORA-16038: log 2 sequence# 2456 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 2 thread 1: 'F:\ORADATA\REDO\....\REDO02.LOG'
USER (ospid: 3308): terminating the instance due to error 16038
ARC0: STARTING ARCH PROCESSES
System state dump requested by (instance=1, osid=3308), summary=[abnormal instance termination].
System State dumped to trace file C:\APP\diag\rdbms\.....\trace\xxxxx_diag_504.trc
Dumping diagnostic data in directory=[cdmp_20121107205514], requested by (instance=1, osid=3308), summary=[abnormal instance termination].
Instance terminated by USER, pid = 3308
Wed Nov 07 21:13:40 2012
Adjusting the default value of parameter parallel_max_servers
from 640 to 185 due to the value of parameter processes (200)
Starting ORACLE instance (normal)
I'm new to all this. What do I do in rman to clear this up?

Cc does not launch at startup

CC does not start at startup.. no icons no nothing

open your cc app>click the gear icon> click the general tab>tick launch at login

Xscreensaver daemon not starting on startup w/KDE

Similar Messages

Maybe you are looking for