Xsd - java : create enumeration file with non default ordinals
Hi,
i'd like to create an XSD file which will create a java enumeration file.
I successed to create the enums in the java file like this :
RED,
ORANGE,
BLUE
(with default ordinals - 0, 1, 2 ...)
but i want this to look like :
RED (1),
ORANGE (3),
BLUE (10)
thanks in advance,
nati
I'm not sure that you understand my meaning.
I want that my XSD file will create automaticlly an enum file (in Java).
right now, my XSD file looks like that :
<xsd:simpleType name="colors">
<xsd:restriction base="xsd:string">
<xsd:enumeration value="RED"/>
<xsd:enumeration value="ORANGE"/>
<xsd:enumeration value="BLUE"/>
</xsd:restriction>
</xsd:simpleType>
and the java file which this XSD creates has the values above with the ordinals : RED - 0, ORANGE - 1, BLUE - 2.
I'm asking if there is any way to control the ordinals of those values in the XSD file (NOT in the Java file) ?
Thank you very much....
Similar Messages
-
Generate configuration file with non-default binding configuration in WCF 4.5
Hi,
I am using WCF 4.5 for generating configuration file.
I have referred following MSDN link for generating configuration file.
https://msdn.microsoft.com/en-us/library/hh309266(v=vs.110).aspx
I want binding property for e.g 'maxReceivedMessageSize' in configuration file.
I changed default value of 'maxReceivedMessageSize' to non-default value, but i could not able to saw 'maxReceivedMessageSize' binding property in configuration file.
Is anyone know why i am not able to see non-default value in configuration file.
Thanks.Hi Amy,
Thanks for reply. Please see below content of configuration file.
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<system.serviceModel>
<bindings>
<netTcpBinding>
<binding name="TestCustBind_CustomerService" />
</netTcpBinding>
</bindings>
<client>
<endpoint address="net.tcp://ABC/CustTest"
binding="netTcpBinding" bindingConfiguration="TestCustBind_CustomerService"
contract="CustomerService" name="TestCustBind_CustomerService">
<identity>
<userPrincipalName value="[email protected]" />
</identity>
</endpoint>
</client>
</system.serviceModel>
</configuration>
Thanks. -
Configuring IPIB with non-default partition key
Hello
I want to put IB HCA port into non-default partition to create separate network on my IB fabric. On IB switch (Voltaire ISR9096) I created network with non-default partition key 0x7ffe and add HCA port to this partition.
But this IB-VPPA was displayed as unconfigured on Solaris host
ib::3BA0001004181,ffff,ipib IB-VPPA connected configured ok
ib::3BA0001004182,fffe,ipib IB-VPPA connected unconfigured unknown
ib::3BA0001004182,ffff,ipib IB-VPPA connected configured okConfiguration of new VPPA with cfgadm was unsuccessful:
# cfgadm -c configure ib::3BA0001004182,fffe,ipib
Configure the device: /devices/ib:fabric::3BA0001004182,fffe,ipib
This operation will suspend activity on the IB device
Continue (yes/no)? yes
cfgadm: Hardware specific failure: configure operation failed ap_id: /devices/ib:fabric::3BA0001004182,fffe,ipibI unconfigured VPPA with default partition key (0xffff) on HCA port 0x3BA0001004182 and issued cfgadm for VPPA with pkey 0xfffe again - the same effect.
I tried this on Solaris 10 8/07 and OpenSolaris b72 with the same result - no success ;)
Is it possible to configure VPPA with non-default pkey on Solaris ?
Is it possible to configure more than 1 IPIB VPPA on single HCA port ?
How to perform these configurations ?
Thanks in advance.
Regards,
Denishi
I was able to setup the listener to serve both databases using netmgr, thanks. Apparently I was trying to use the wrong tool for this previously.
Now i'm able to access the EM Database Control and it seems to be working fine though i get the following error message
Logged in As SYS
Error
java.lang.Exception: Number of responses does not match queries
Database Instance: devel.foo.bar
Now, i'd like to be able to use EM for administering two separate databases (running on the same host). Do i need to migrate the database control somehow to grid control? How do i do that?
What about security? I'd like to use SSL and limit connections to selected clients only.
regards,
aspa -
Sharing digital files with non Adobe users
Can someone tell me how to share Adobe files with non-Adobe users? At the Adobe Max Conference, they mentioned that this was possible, but I'm not sure if this is something that is available now or just in the future. Thoughts, comments?
Thanks,
-JLUMBERYou first need to upload the file you want to share to Creative Cloud, then through the web interface (https://assets.adobe.com/files you can select the file in question, click the "Send Link" button near the top of the file list, and then click "Create Public Link".
This will make the file public and provide you with a link to share to your intended recipient.
It actually works quite nicely.
Cheers,
Dave -
Java-wsdl-mapping file with incorrect case
Hi. We're working with JDeveloper 10.1.3.1 preview and have encountered what I believe to be a bug. We have a schema with element names that are mixed case (such as FirstName). We are trying to use JAXB to create our classes and then wrap it as a web service. The problem is, the WSDL and java-wsdl-mapping file references the element names as firstName rather than FirstName.
In experimenting, I've learned that if I create the WSDL and schema first and "Create Java Project from WSDL" that it creates a java-wsdl-mapping file with the case preserved. However the first time I go into the web services properties dialog and click OK, it re-creates these files with the case changed again.
Please advise if this is expected behavior...although I don't see how it could be since it is inconsistent.
Thanks very much,
Richard DavisI was told the product manager and/or developers from Oracle watched this board. Doesn't anyone have a response to this?
-
How to create pdf files with text field data
how to create pdf files with text field data
That looks like it should work, but it doesn't.
I opened the PDF I had created from Word in Acrobat (X Pro). Went to File > Properties. Selected "Change Settings". I then enabled "Restrict editing...", set a password, set "Printing Allowed" to "none", "Changes Allowed" to "none", and ensured that "Enable copying of text..." was disabled.
I saved the PDF file, closed Acrobat, opened the PDF in Reader, and I was still able to select text and graphical objects.
I reopened the PDF in Acrobat, and the document summart still shows everything as allowed. When I click on "show details" (from File > Properties) it shows the correct settings.
Any ideas? -
How do I move a picture from one pdf-file to another, already created pdf-file, with adobe reader?
Reader doesn't have editing capabilities.
-
Error when import file with non-english character
Hi,<br /><br />I have images file with non-english character (unicode), for example ABC<X>.png where <X> is non-english character such as japanese, chinese, etc.<br /><br />Whenever I want to import the file to After Effects (right click -> import -> file), I always encounter error:<br /><br />Finding file/dir info for the file "C:\...\ABC?.png" -- file not found (-43) (3::30)<br />Can't import file "ABC?.png": unsupported filetype or extension. (0::1)<br /><br />My PC is Windows XP Professional 2002 SP2 English.<br /><br />How to solve this problem?<br /><br />Thanks
Adjust your system language settings. Proper file name conventions require a consistent Unicode environment, so install the respective foreign language support files or switch the language system-wide. Mixing different zones/ code ranges is always a bad idea. If your system is not in Japanese, AE will always misinterpret the characters and refuse to import. If that's not feasible, simply rename the files.
Mylenium -
Creating XML files with the DME
Hi All,
I'm working on an integration project between my company and HSBC, they are requesting that we supply our AP payment files for foreign currency in XML format.
I have some limited experience with the DME and know it can create XML files, however, the elements available for XML files are different to standard flat files. Also it doesnt seem like I can create files with multiple levels? e.g.
<InitgPty>
......... <Id>
............... <OrgId>
...................... <BkPtyId>ABC00103003</BkPtyId>
.............. </OrgId>
........ </Id>
</InitgPty>
Does anyone have any documentation or experience with creating XML files with DME?
thanks
Phil.Hi,
Please ask any Implementation team in ABAB or Report painter team with your friends,
Thanks and REgards
N.Soma Sundaram -
Creating a file with content conversion
Hi all,
I have a scenario in XI which i create a file in it,
I want to create the file with the content conversion option but with no field separator.
I have an error message - "File adapter receiver channel is not initialized. Unable to proceed: null" if i don't use the fieldSeperator option.
I don't want to use this option, I want the file to be created without separators.
Thanks,
NaamaHi Namma,
Go through very imp blogs:
File Content prameters for the Receiver Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
File Content prameters for the Sender Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Refer
File Receiver with Content Conversion
File Receiver with Content Conversion
Configuring the Receiver File/FTP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
File content conversion sites:
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
File Receiver with Content Conversion
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
How to send a flat file with various field lengths and variable substructures to XI 3.0
Content Conversion (Pattern/Random content in input file)
NAB the TAB (File Adapter)
File Content Conversion for Unequal Number of Columns
Content Conversion ( The Key Field Problem )
The specified item was not found.
File Receiver with Content Conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
The specified item was not found. - FCC
The specified item was not found. - FCC
File Content Conversion for Unequal Number of Columns
File Content Conversion for Unequal Number of Columns - FCC
Content Conversion (Pattern/Random content in input file)
Content Conversion (Pattern/Random content in input file) - FCC
XI Configuration for MDM Integration - Sample Scenario - FCC - MDM
Thanks,
Satya Kumar -
To create multiple files with same content but with different names
Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
VarmaWhat do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek. -
Create dump file with datapump, with read right for everybody
Hello,
I have a problem under Linux : I am creating dump files with datapump.
Those dump files are owned by a dba group, with no read access for users not in the dba group.
Is there a way that the datapump utility creates dump files with a read access given to any user ?
FranckUnlike "exp", when using "expdp", the dumpfile is created by the server process. The server process is forked from the database instance. It inherits the umask settings that are present when the database instance is started.
(Therefore, the only way to change the permissions would be to change the umask for the oracle database server id and restart the database instance --- which is NOT what I would recommend).
umask is set so that all database files created (e.g. with CREATE TABLESPACE or ALTER TABLESPACE ADD DATAFILE) are created with "secure" permissions preventing others from overwriting them -- of course, this is relevant if your database files are on FileSystem.
Hemant K Chitale -
In Adobe Captivate, there is a "PDF export" checkbox available when you publish your project.
It checked the box, and the project pulication created a file with a PDF extension.. but it's actually a video. Shouldn't it export the slides as a proper PDF document ?Thanks for the quick answer. I did not know about interactive PDFs..
I just found how to export as a Word document. I would have expected to find that option in "Publish" or "Export", not "Print".. Anyway, I now have what I needed -
Re: to create outbound file with multiple header ,detail and trailor in informatica
Dear Mohan Prakash, Please mentation The Target Which Format you need. Please let me know. Thanks & RegardsKasireddy+966545281845
hi I want to create a file with muiltple header detail and trailorSample of my file 1F99500094959 5F99000000999911025F99000000999912025F99000000999913029F99500094959 1G83341002729803 5G83000000999918020109G83341002729803 1G83910377940 5G830000009999190201011050003522029G83910377940 T20110720000000900000006750{ In this file 1 is header and 5 is detail and 9 is trailer and in last T segment is also trailerI have any idea to create seperate 3 files and in lastconcatenate all file with the help of unixbut in my case data is so large (in millions) this approach is not use full please suggest my any ideaHow to create VSAM file
-
How can I automatically create the files with serie-name?
Hello, Everyone,
I have a question again.
How can I automatically create the file with a serie-filename?
e.g. I have a program, it will repeat 5 times, and every time it will create a bmp-file, and I want to let this program automatically save these 5 files with a Serie-filename like File001.bmp, File002.bmp, .... File005.bmp.
How can I do it?`
Thanks a lot.
Regarts,
JohnnyHi Deepu,
one more comment
The format code should be "%04d" to get leading zeros and have filenames with same length...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Maybe you are looking for
-
How to pass a table of data to transaction.
Hi, I need to pass several rows of data to an internal table of a bapi from a page . I know how to create a table in xMII transaction within itself. But I couldn't figure how to pass several rows from a HTML page to an input parameter of a Xacute que
-
yesterday i downloaded dead trigger and asphalt 8 and transferred them to my iphone 5c via itunes downloaded to my laptop, but whenever i log in again to itunes store it starts downloading those applications again which i want to stop, how to do that
-
Hi In the developement system when I enter the alternate payee and permitted payee field in the vendor master and then go to transaction F-48. I can see the payee field. When I try the same in the quality the payee field does not populate in F-48. pl
-
Program in which i am downloading p0002-pernr , pernr-ename , p0002-sp
I have written a program in which i am downloading p0002-pernr , pernr-ename , p0002-sprsl in to c:\temp in csv format , i am able to download the file but the program continue running its not stoping its acting like an infinite loop pro
-
Using loadMovie command... sizing?
on (press){ contentMC.loadMovie("Ilab7_McCullough.swf"); As shown in the example... I have entered an action to load a movie when I press a button. It works fine but the original swf was made at 800 by 600 when I need it to be 400 by 200. Is th