XServe and Blue Screen!

The host server in my Xserve RAID boots fine to the log in screen. When I enter the username and password I get a brief black screen and then a full blue screen. Server is available remotely, but is now seemingly headless!! Would have thought video card except that on boot up I get all the normal video.... the username and password work remotely just fine. This seems to have become an issue with the 10.4.11 update to XServe software. Until that time video was fine.

Hi:
Just had a similar problem.
(And I think the solution might apply to Leopard Server as well as client versions of Tiger and Leopard.)
Last night, I applied the 2009-001 security update to our PPC Tiger Server. I did it via a download from Software Update, controlling the server's screen remotely from home via ARD.
Upon restart, I could not longer see or control the server via ARD, but the mail server was still working. ssh prompted me for passwords, but wouldn't let me connect.
So I came to the office this morning and found a blue screen and a spinning wheel cursor.
I tried a number of things, including:
--Starting in safe mode (it wouldn't)
--Single user mode and running fsck
--Repairing permissions using Disk Utility (via a start-up CD)
--Repairing the disk using Disk Utility (via a start-up CD)
--Resetting the PRAM
--Disconnecting peripherals
Then I saw a tip on-line somewhere and reinstalled the security update in the following manner:
--Download the update from Apple's downloads page on CPU-matching hardware (that is, a PowerPC Mac.)
--Connect via FireWire Target Disk mode.
--Double-click the installation package and install it on the server's hard drive. (This didn't work the first time I tried installing from an Intel Mac.)
--Restart.
And the server restarted and away we go.
I've got some mail server issues to repair (it appears), but at least it's running again.
I have not tried restarting again to see what happens.
mm

Similar Messages

  • I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

  • Dmp file and blue screen error Windows 7

    Hi,
    Just wondering if someone can tell me how to read the dmp file created after the blue screen appears ?
    I have just recently upgraded my Toshiba P300 from Vista 64 bit to Windows 7 Home Prem 64 bit. 
    I dont know why Windows 7 keeps crashing and so far I have no idea of how to open the .dmp
    file (I have zipped the dmp file and attahced below).
    http://cid-7a99d6152c55359c.skydrive.live.com/self.aspx/.Public/minidump/022710-26223-01.zip
    The message that I been given so far says :
    Problem signature:
      Problem Event Name:                        BlueScreen
      OS Version:                                          6.1.7600.2.0.0.768.3
      Locale ID:                                             3081
      Additional information about the problem:
      BCCode:                                               a
      BCP1:                                                    FFFFF6FC40052000
      BCP2:                                                    0000000000000002
      BCP3:                                                    0000000000000000
      BCP4:                                                    FFFFF80002E62322
      OS Version:                                          6_1_7600
      Service Pack:                                       0_0
      Product:                                               768_1
      Files that help describe the problem:
      C:\Windows\Minidump\022710-26223-01.dmp
      C:\Users\Caroline\AppData\Local\Temp\WER-125393-0.sysdata.xml

    I have try step 1 and didnt boot up the window normaly...same thing happened
    Window 7 is loading...then boom the screen failed and blue screen appear...
    there is the latet crash report
    Version=1
    EventType=BlueScreen
    EventTime=129810543666556864
    ReportType=4
    Consent=1
    ReportIdentifier=9fb6a978-99f3-11e1-9b67-fa9a72be4846
    IntegratorReportIdentifier=050912-14508-01
    Response.type=4
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.1.7601.2.1.0.256.1
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=3084
    UI[2]=C:\Windows\system32\wer.dll
    UI[3]=Windows has recovered from an unexpected shutdown
    UI[4]=Windows can check online for a solution to the problem.
    UI[5]=&Check for solution
    UI[6]=&Check later
    UI[7]=Cancel
    UI[8]=Windows has recovered from an unexpected shutdown
    UI[9]=A problem caused Windows to stop working correctly.  Windows will notify you if a solution is available.
    UI[10]=Close
    Sec[0].Key=BCCode
    Sec[0].Value=a
    Sec[1].Key=BCP1
    Sec[1].Value=0000000000000000
    Sec[2].Key=BCP2
    Sec[2].Value=0000000000000002
    Sec[3].Key=BCP3
    Sec[3].Value=0000000000000001
    Sec[4].Key=BCP4
    Sec[4].Value=FFFFF8000308BB7E
    Sec[5].Key=OS Version
    Sec[5].Value=6_1_7601
    Sec[6].Key=Service Pack
    Sec[6].Value=1_0
    Sec[7].Key=Product
    Sec[7].Value=256_1
    File[0].CabName=050912-14508-01.dmp
    File[0].Path=050912-14508-01.dmp
    File[0].Flags=589826
    File[0].Type=2
    File[0].Original.Path=C:\Windows\Minidump\050912-14508-01.dmp
    File[1].CabName=sysdata.xml
    File[1].Path=WER-27253-0.sysdata.xml
    File[1].Flags=589826
    File[1].Type=5
    File[1].Original.Path=C:\Users\Moz\AppData\Local\Temp\WER-27253-0.sysdata.xml
    File[2].CabName=Report.cab
    File[2].Path=Report.cab
    File[2].Flags=196608
    File[2].Type=7
    File[2].Original.Path=Report.cab
    FriendlyEventName=Shut down unexpectedly
    ConsentKey=BlueScreen
    AppName=Windows
    AppPath=C:\Windows\System32\WerFault.exe
    ive also have got a AI SUITE II crash...
    Version=1
    EventType=APPCRASH
    EventTime=129809041249476693
    ReportType=2
    Consent=1
    UploadTime=129809041250516752
    ReportIdentifier=ddea075d-9895-11e1-9a9f-eb38eba38a41
    IntegratorReportIdentifier=ddea075c-9895-11e1-9a9f-eb38eba38a41
    WOW64=1
    Response.BucketId=2555721005
    Response.BucketTable=1
    Response.type=4
    Sig[0].Name=Application Name
    Sig[0].Value=AI Suite II.exe
    Sig[1].Name=Application Version
    Sig[1].Value=1.0.0.40
    Sig[2].Name=Application Timestamp
    Sig[2].Value=00000000
    Sig[3].Name=Fault Module Name
    Sig[3].Value=KERNELBASE.dll
    Sig[4].Name=Fault Module Version
    Sig[4].Value=6.1.7601.17651
    Sig[5].Name=Fault Module Timestamp
    Sig[5].Value=4e211319
    Sig[6].Name=Exception Code
    Sig[6].Value=0eedfade
    Sig[7].Name=Exception Offset
    Sig[7].Value=0000b9bc
    DynamicSig[1].Name=OS Version
    DynamicSig[1].Value=6.1.7601.2.1.0.256.1
    DynamicSig[2].Name=Locale ID
    DynamicSig[2].Value=3084
    DynamicSig[22].Name=Additional Information 1
    DynamicSig[22].Value=0a9e
    DynamicSig[23].Name=Additional Information 2
    DynamicSig[23].Value=0a9e372d3b4ad19135b953a78882e789
    DynamicSig[24].Name=Additional Information 3
    DynamicSig[24].Value=0a9e
    DynamicSig[25].Name=Additional Information 4
    DynamicSig[25].Value=0a9e372d3b4ad19135b953a78882e789
    UI[2]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
    UI[3]=AI Suite II has stopped working
    UI[4]=Windows can check online for a solution to the problem.
    UI[5]=Check online for a solution and close the program
    UI[6]=Check online for a solution later and close the program
    UI[7]=Close the program
    LoadedModule[0]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
    LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
    LoadedModule[2]=C:\Windows\syswow64\kernel32.dll
    LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll
    LoadedModule[4]=C:\Windows\syswow64\WINTRUST.DLL
    LoadedModule[5]=C:\Windows\syswow64\msvcrt.dll
    LoadedModule[6]=C:\Windows\syswow64\CRYPT32.dll
    LoadedModule[7]=C:\Windows\syswow64\MSASN1.dll
    LoadedModule[8]=C:\Windows\syswow64\RPCRT4.dll
    LoadedModule[9]=C:\Windows\syswow64\SspiCli.dll
    LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll
    LoadedModule[11]=C:\Windows\SysWOW64\sechost.dll
    LoadedModule[12]=C:\Windows\syswow64\ADVAPI32.DLL
    LoadedModule[13]=C:\Windows\system32\VERSION.DLL
    LoadedModule[14]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_ec83dffa859149af\COMCTL32.DLL
    LoadedModule[15]=C:\Windows\syswow64\GDI32.dll
    LoadedModule[16]=C:\Windows\syswow64\USER32.dll
    LoadedModule[17]=C:\Windows\syswow64\LPK.dll
    LoadedModule[18]=C:\Windows\syswow64\USP10.dll
    LoadedModule[19]=C:\Windows\system32\MSIMG32.DLL
    LoadedModule[20]=C:\Windows\syswow64\SHELL32.DLL
    LoadedModule[21]=C:\Windows\syswow64\SHLWAPI.dll
    LoadedModule[22]=C:\Windows\syswow64\OLE32.DLL
    LoadedModule[23]=C:\Windows\syswow64\OLEAUT32.DLL
    LoadedModule[24]=C:\Windows\system32\IMM32.DLL
    LoadedModule[25]=C:\Windows\syswow64\MSCTF.dll
    LoadedModule[26]=C:\Windows\system32\CRYPTSP.dll
    LoadedModule[27]=C:\Windows\system32\rsaenh.dll
    LoadedModule[28]=C:\Windows\syswow64\imagehlp.dll
    LoadedModule[29]=C:\Windows\system32\ncrypt.dll
    LoadedModule[30]=C:\Windows\system32\bcrypt.dll
    LoadedModule[31]=C:\Windows\SysWOW64\bcryptprimitives.dll
    LoadedModule[32]=C:\Program Files (x86)\ASUS\AI Suite II\AsMultiLang.dll
    LoadedModule[33]=C:\Windows\system32\WINSPOOL.DRV
    LoadedModule[34]=C:\Program Files (x86)\ASUS\AI Suite II\ImageHelper.dll
    LoadedModule[35]=C:\Windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.17514_none_72d18a4386696c80\gdiplus.dll
    LoadedModule[36]=C:\Windows\system32\USERENV.dll
    LoadedModule[37]=C:\Windows\system32\profapi.dll
    LoadedModule[38]=C:\Windows\system32\GPAPI.dll
    LoadedModule[39]=C:\Windows\system32\cryptnet.dll
    LoadedModule[40]=C:\Windows\syswow64\WLDAP32.dll
    LoadedModule[41]=C:\Windows\system32\SensApi.dll
    LoadedModule[42]=C:\Windows\system32\Cabinet.dll
    LoadedModule[43]=C:\Windows\system32\DEVRTL.dll
    LoadedModule[44]=C:\Windows\system32\WindowsCodecs.dll
    LoadedModule[45]=C:\Windows\system32\WINHTTP.dll
    LoadedModule[46]=C:\Windows\system32\webio.dll
    LoadedModule[47]=C:\Windows\syswow64\WS2_32.dll
    LoadedModule[48]=C:\Windows\syswow64\NSI.dll
    LoadedModule[49]=C:\Windows\system32\credssp.dll
    LoadedModule[50]=C:\Windows\syswow64\mswsock.dll
    LoadedModule[51]=\\.\globalroot\systemroot\syswow64\mswsock.dll
    LoadedModule[52]=C:\Windows\syswow64\WININET.dll
    LoadedModule[53]=C:\Windows\syswow64\Normaliz.dll
    LoadedModule[54]=C:\Windows\syswow64\iertutil.dll
    LoadedModule[55]=C:\Windows\syswow64\urlmon.dll
    LoadedModule[56]=C:\Windows\system32\Secur32.dll
    LoadedModule[57]=C:\Windows\System32\wshtcpip.dll
    LoadedModule[58]=C:\Windows\System32\wship6.dll
    LoadedModule[59]=C:\Windows\system32\IPHLPAPI.DLL
    LoadedModule[60]=C:\Windows\system32\WINNSI.DLL
    LoadedModule[61]=C:\Windows\system32\dhcpcsvc6.DLL
    LoadedModule[62]=C:\Windows\system32\dhcpcsvc.DLL
    LoadedModule[63]=C:\Windows\syswow64\CFGMGR32.dll
    LoadedModule[64]=C:\Windows\system32\uxtheme.dll
    LoadedModule[65]=C:\Windows\system32\DNSAPI.dll
    LoadedModule[66]=C:\Program Files (x86)\Bonjour\mdnsNSP.dll
    LoadedModule[67]=C:\Windows\system32\rasadhlp.dll
    LoadedModule[68]=C:\Windows\System32\fwpuclnt.dll
    LoadedModule[69]=C:\Program Files (x86)\ASUS\AI Suite II\AssistFunc.dll
    LoadedModule[70]=C:\Windows\system32\PROPSYS.dll
    LoadedModule[71]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\comctl32.dll
    LoadedModule[72]=C:\Windows\system32\apphelp.dll
    LoadedModule[73]=C:\Windows\syswow64\CLBCatQ.DLL
    LoadedModule[74]=C:\Windows\system32\wpdshext.dll
    LoadedModule[75]=C:\Windows\system32\WINMM.dll
    LoadedModule[76]=C:\Windows\System32\shdocvw.dll
    LoadedModule[77]=C:\Windows\SysWOW64\ieframe.dll
    LoadedModule[78]=C:\Windows\syswow64\PSAPI.DLL
    LoadedModule[79]=C:\Windows\SysWOW64\OLEACC.dll
    LoadedModule[80]=C:\Windows\syswow64\SETUPAPI.dll
    LoadedModule[81]=C:\Windows\syswow64\DEVOBJ.dll
    LoadedModule[82]=C:\Windows\system32\ntmarta.dll
    LoadedModule[83]=C:\Program Files (x86)\ASUS\AI Suite II\pngio.dll
    LoadedModule[84]=C:\Program Files (x86)\ASUS\AI Suite II\AsAcpi.dll
    LoadedModule[85]=C:\Program Files (x86)\ASUS\AI Suite II\asacpiEx.dll
    LoadedModule[86]=C:\Windows\system32\RpcRtRemote.dll
    State[0].Key=Transport.DoneStage1
    State[0].Value=1
    State[1].Key=DataRequest
    State[1].Value=Bucket=-1739246291/nBucketTable=1/nResponse=1/n
    FriendlyEventName=Stopped working
    ConsentKey=APPCRASH
    AppName=AI Suite II
    AppPath=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe

  • IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    If nothing else works, you might try this one. It has worked for many others ...
    Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414
    Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
    iPad 2 and iOS 8.0.2 Problems
    For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
    Here's one person's solution which will help a lot of iPad 2 users!
    keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
    Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
    SOLVED:  IOS 8 Issues on iPad 2:
    I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
    Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
    THE FIX:  FIRST, be sure you have a current iCloud backup of your device.  Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
    To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now!  :-)
    Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

  • Can Motion 5 replace a green screen and blue screen in the same shot?

    Can Motion 5 replace a green screen and blue screen in the same shot? I would like to replace a green screen with one image, and a blue screen with another.

    Fox gives a good example for keying green & blue (or any other color)  from the same shot. I'd suggest doing a few things to get better accuracy.
    First, the motion keyer always removes the color it detects the most of by default (blue/green). You can override this by setting the Strength parameter to zero, then use the Color sample tool to select the color you want. The advantage is motion will do a good job of targeting only the hue (color) that you want to remove and set an appropriate starting softness.  It also will remove spill based on this color.  Looking at Fox's example movie and the shot, I'd approach the same shot this way:
    Remove the Blue
    1. Apply the keyer and set the strength to zero.
    2. Use the Sample Color tool and select the blue (or other color) to be removed.
    3. Decrease the spill level (if needed). In Fox's example the spill from the blue glasses is going to be minimal, especially compared to the green screen, your shot may need different adjustments. Only de-spilling what you need to will give you more accurate color right away and minimize additional color correction that might be needed later.
    4. Use the Color selection tools (Chroma wheel/Luma bar) to fine tune.  Ideally you want a minimal tolerance, the inner selection, with a nice fall off, the outer selection. Try with the Scrub boxes setting first, then switch to manual if you need more control. Again see Fox's example.
    Remove Green
    It's the same as the blue, you could apply the keyed to the same clip or a parent group, at this point it's many user preference.
    With these techniques you can remove any color from a shot or create a mask based on a color. BTW, as you are learning to use the keyer I'd highly recommend  having the Color Selection open so you can see the graphs.  These give you real time feedback as you make selections and changes with the Strength, Refine and Color selection tools.  Watch what happens as you make selection or changes, sometimes the problem area is actually in the brightness not the color, or the softness may change  more than the tolerance selection.  Observing what is happening in these graphs will help you figure out wha to change and speed things up.

  • Cropping and Blue Screening - 2 unrelated questions.

    1) When I straighten a still in Canvas by using the wire frame, to make a house level, say, the cropping lines, naturally, move with it. So a cropping line at an angle will give me a slanting top and bottom line. So how can I crop it so that the picture has a square aspect? Is the only recourse to go back to the original site for the picture, GIMP or iPhoto, perhaps, crop it there and re-import the photo into FCE? Or is there a quicker way?
    2) I have added a number of videos above my main video to show, for example, falling snow, and eliminated their black background by Modify - Composite Mode - Screen. Very easy and by no means unusual. So, my question, is, why all the fuss about green and blue screening? Setting it up seems troublesome. A black background for the purpose is much easier to make, and, for that matter, easier to find. I looked down my back yard this morning and this side of the creek are jet black bushes which would seem ideal for such a purpose. This seems such a no-brainer that I think I must be missing something. But it is curious.
    Allosaurus

    1) I shall immediately turn to the garbage matte section in your book - I'm sure I remember seeing one - and work it out from there. And here I always thought a garbage matte was that rug I bought in Cairo.
    2) A black screen. That does give me a thought. When I return to my upcoming masterpiece, " "Orrible Murder at the Castle Doom" I could put one of my granddaughters in a black suit, photograph her against a black background and Voila! a floating head. I wonder if they give out Oscars for original ideas?
    Once more. Thank you.
    Allosaurus

  • Blank Black Screen And Blue Screen. Do I Need To Do Reflow To Ati Chipset?

    Hello i want to tell you my problems and what i did until now.
    I have hp pavilion dv3 4150st. I was using win7 64 bit . and i was geting an error that says "display driver amd driver stopped responding and has successfully recovered".I started to get this eror often . And a few days later  my pc startet to get blue screen errcor after a few second later than display driver error. . And  after 2-3 blue screen error i lost my screen. It was blank black . when i restart pc the screen was blank black. there was no image. When i started to fix another monitor, i saw screen . And i installed the win 7 with another external monitor. Bu i had still black screen after install the windows.. Itand  was still black after i remove the ectgernal monitor. I installed bios again but i had still black screen. And i tried the install ati display driver after installing windows . But after i installed the display driver, i had the blue screen error again. And now i have still both blank black screen and blue screen problem. 
    I cleaned the motherboard. I resetted bios. I installed bios. i installed windows again. i installed ati display driver.But these couldnt solve the problems. Please can you tell me what can i do now ?

    Hi beginner_2012,
    Thank you for your post, I will do my best to assist you.
    I grasp that you were getting the error "display driver amd driver stopped responding and has successfully recovered" quite often.  Then a  few days later you got the blue screen then the above error message, after 2 -3 more errors the screen is now blank or black. Here is a document to assist you with this.  Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • My ipnone 5s keeps crashing and blue screening any advice

    My ipnone 5s keeps crashing and blue screening any advice

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced 6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen

    grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (sorry, I think  it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.
    Thanks for any help!

    You have to take the computer to the Apple store to have it checked out.
    Genius Bar reservation
    http://www.apple.com/retail/geniusbar/
    Best.

  • X-Fi Titanium and Blu-Screen (Win XP)

    %[ Hi ti all, i am a new user and, of course, i have my first big problem with creative drivers/software.
    Before installation of audio card all worked greatly but after i get a blu screen at shut down or at reboot (is the same).
    I used the latest version of the drivers available on the web (2.7.0006).
    I removed audio card and drivers and all works greatly, too.
    I reinstalled audio card + drivers and blu screen at shut down/reboot appears again.
    Anyone knows the solution.
    Audio card works correctly but with this blue screen ?the creative console don't save any settings, so every time
    i turn on the pc i have to configure it (effect, mixer, number of speakers, mic amplifiers, etc. etc.).
    Please help me.
    This is my configuration:
    Cpu Intel Core i7 920
    M/b Asus P6T (bios 0603)
    Ram 6 Gb DDR3 (3x2Gb DDR3 Corsair) ('cause i have Vista64 on another partition)
    ATI Radeon HD4890 Gb?
    HD Seagate 500 Gb
    Thanks in advance.

    Anyone?Message Edited by Rayman968 on 08-0-2009 2:47 PM

  • Gateway FX and Blue Screen of Death

     Computer:
    Gateway FX 7024
    GeForce 8800GT 512 mb
     Problem:
     I've had the computer for 1 1/2 years with very few problems. Recently, the screen will lock up solid and be illegible with "static" lines all the way down the monitor. Sometimes before the screen locks up, it will flip to the blue screen of death, say it's dumping physical memory, and then lock up. Only thing I can do is restart, but it will do it again at random lengths of time. Happens more while I'm playing games than anything else. Sounds to me like the graphics card has gone Tango Uniform, but a computer guru, I am not. Any ideas?
     What I've done so far:
     I have checked for updated drivers and installed them.... no fix. I rolled back the drivers.... no fix. I have visually checked fans on power supply and graphics card to make sure they are working and they are fine. The fan on the motherboard spins, but doesn't appear to be moving overly fast. I checked BIOS and everything looks around what it should be for temp settings. In the "problems and solutions" application, it shows a video hardware error.
     The only thing i did notice was there is only a 400W power supply installed and from the posts I've read, the 8800GT graphics card should have a 700-900W power supply. However... I've never had problems with it before. Could this cause the problem after 1 1/2 years?
     help... i'm shaking from game withdrawals

    Visited a company IT department today and an engineer looked at the AT&T Net Client settings. It now works - this may have been the "fix" for those in a similar predicament (all in the AT&T Net Client):
    1. Click "Settings".
    2. Click "Show the login properties window".
    3. Click "Configure".
    4. Click "Next".
    5. Select the "Both the internet and my company's intranet" radio button.
    6. Select "Managed VPN - SSL DualAccess" from the dropdown.
    7. Click "Finish".
    Cheers,
    - Pete

  • MSI GT70 Crashes and Blue Screens

    I just bought an MSI GT70 and have had it crash every time I browse the web and try to play anything.  I've updated my drivers to try and fix it as well as trying a reset to factory defaults.  So far I haven't had any luck.  It doesn't seem to mind just sitting there but when I play anything it will do one of 3 things.  It will crash the program and send me back to the desktop, it will restart the computer, or it will blue screen.  I've never really had issues like this before so anything that might help would be appreciated.
    And Posted in the wrong Section    What a wonderful start.

    looks like you have to rma it

  • PLease Help!! Leopard and Blue Screen

    I know there is a lot of discussion out there about a blue screen after installing Leopard. Well I had leopard installed and working for a while and then one day i started having issued where iTunes would lock up my MacBook and I would have to restart the MacBook because i could not stop it from "determining gap less playback" It would do it every time i plugged in my iPhone or my iPod. So everything was working great other than the iTunes issue. Then one night while my wife was using the MacBook it turned off on her so she proceeded to turn it back on only to have it boot up to a blue screen. Keep in mind we had been running Leopard for a few months this was not a brand new install. I purchased my MacBook used from a fried who did not provide me with the CD/DVD's to restore the MacBook since he lost them in his move. So I have searched far and wide trying to resolve this issue. I have booted into Single user mode and did the command prompt options...
    1. Reboot into single-user mode (hold Cmd-S while booting machine)
    2. Follow the directions OSX gives you when you get to the prompt (I think these were them - just type the two commands it tells you to):
    fsck -fy /
    /sbin/mount -uw /
    3. Remove the following files:
    rm -rf /Library/Preference Panes/Application Enhancer.prefpane
    rm -rf /Library/Frameworks/Application Enhancer.framework
    rm -rf /System/Library/SystemConfiguration/Application Enhancer.bundle
    rm -rf /Library/Preferences/com.unsanity.ape.plist
    4. Exit, to continue booting normally
    exit
    restart
    I have tried to boot the MacBook in safe mode with no luck. I think i have done everything i can. I called Apple support and was told that the MacBook is out of warranty by 408 days. Can i buy the restore CD/DVD? Is there something that I am missing? What am I not doing? Please help me???

    Does the Blue Screen happen after the Gray screen with the Apple logo and the spinning gear below it or when you turn on the computer you see the blue screen right away? You can try resetting the PRAM. Turn on the computer while holding the CommandOption+PR. These buttons will reboot your computer manually so let go after you saw the computer restart by itself. You also mentioned that you installed Leopard on your computer. So do you still have the Leopard install disk with you? If you do, boot from that disk. With the Leopard disk inside your optical drive, press the C key while turning it on. Once booted, try do repair the disk permissions and disk in Disk Utility.
    Hope this helps.

  • Error and Blue screen with pc suite

    Hello
    Recently I am having a problem wid nokia pc suites. After putting the notebook on sleep or hibernation, when i resume windows, i get an error message  saying rundll32 has stopped working. details of the error is as follow -
     Problem signature:
     Problem Event Name:    APPCRASH
     Application Name:    rundll32.exe
     Fault Module Name:    USER32.dll
     Locale ID:    16393
    Sometimes i get the blue screen randomly with the same error details. 
    The problem gets solved when I have uninstalled pc suite. I have tried with 2 different versions, 7_1_18_0 and   7_1_26_0
    but i am having this issue with both the versions.
    Details of my system are - Vista Home Premium,  Service pack 1, 32 bit, 3 gb ram , intel core2 duo. Connectivity mode is cable and bluetooth

    Hello
    Recently I am having a problem wid nokia pc suites. After putting the notebook on sleep or hibernation, when i resume windows, i get an error message  saying rundll32 has stopped working. details of the error is as follow -
     Problem signature:
     Problem Event Name:    APPCRASH
     Application Name:    rundll32.exe
     Fault Module Name:    USER32.dll
     Locale ID:    16393
    Sometimes i get the blue screen randomly with the same error details. 
    The problem gets solved when I have uninstalled pc suite. I have tried with 2 different versions, 7_1_18_0 and   7_1_26_0
    but i am having this issue with both the versions.
    Details of my system are - Vista Home Premium,  Service pack 1, 32 bit, 3 gb ram , intel core2 duo. Connectivity mode is cable and bluetooth

  • ITunes 9.2 causes fatal error and "blue screen of death"

    I installed Itunes 9.2 this morning and whenever I tried accessing this version of Itunes, my system hangs and showed me the infamous “blue screen of death”. I have tried uninstalling and reinstalling Itunes but nothing seems to work.
    Anyone encountering this problem and is there any way to solve this? Thanks!

    I was using v9.1.1.12 and could not synch my iphone with outlook although with other versions there was no problem so was keen to install the new version of iTunes yesterday (9.2.0.61). Installation went fine, iTunes opened up perfectly and read my music library and hey presto synched my phone with outlook. I was well pleased. Closed down itunes and went back to working A couple of hours later as my secretary had updated my calendar I plugged in my iphone and itunes started to open then.... disaster. The blue screen appeared.
    I restarted again, and again and again and the same thing happens everytime iTunes was opened (independently or when plugging my iphone in). Tried 4 times.
    I did a repair using itunes installer. No change stilled blue screened when opened. I then had the bright idea of uninstalling iTunes totally and reinstalling. No change - itunes begins to open then causes blue screen.
    The next step I uninstalled itunes. Did a disk defrag and then thought I would reinstall version 9.1.1.12 and install the newer version over the top. But hey you have guessed it, the older version would not open because the library it was using had been created with a newer version i.e. v9.2.0.61 - nice one iTunes!!
    So at the moment I have no iTunes at all so am stuffed. So, iTunes solves one problem but creates another. Do they ever check these things???
    Help!!

Maybe you are looking for