Xserve and Compaq HSG80 won't play nice.

My company purchased a used HSG80 SAN to use in conjunction with an xserve. The xserve is only a few months old and has been fully updated to 10.5.3. They are connected through Fiber channel.
I have made available from the SAN that is 820GB in size. However whenever I try to write data to the mounted drive it will either not complete successfully at all in the case of files over a few hundred megabytes in size. Small files will write, but will be corrupted.
I have tried giving a linux machine access to his disk and it can partition and write files just fine.
Are there any known issues with writing to the HSG80, or any fiber channel SAN for that matter?

Donno if anybody has done any testing with an HSG80 and an Xserve with Mac OS X Server; the 'G is a fairly old controller. Most folks are probably using the MSA series controllers in this range now.
HP have published compatibility with a few of its StorageWorks widgets.
HSG80 firmware versions 8.7-7 or 8.8F look to be the current firmware. (There are some older versions of HSG80 that don't play nice with 146 GB or larger spindles.) What revision firmware do you have loaded?

Similar Messages

M-audio 410 and Soundtrack Pro won't "PLAY NICE" together!!

I can't get any output to my Firewire 410 from Soundtrack Pro. The input works but no output. I tried every setting with not one db of output. The most recent was not looping through another firewire device, but to go straight into my G5.
Does anyone have this device working on your mac?
Please help if you can,
JCB123

I have the same setup and haven't had any problems. I am connected by firewire. In STP, my input device and my monitor are set to Firewire 410. In System Prefernces / Sound, I have both my input and output set to Firewire 410 as well. And in the M-Audio Firewire 410 audio interface software under the Mixer Tab, I have spdif highlighted under Analog In. Then under the Output Tab I have Main highlighted under SPDIF OUT.
I run an optical cable from the 410 to a hometheatre system right now but have a proper set of audio monitors on the way. I intend to plug them into outputs 1&2 in which case I will also highlight 1/2 under ANALOG IN under the MIXER tab and highlight MAIN under 1/2 OUT under the OUTPUT tab.
Hope this helps a bit. I am still new to this but so far have been able to get this far. Good luck!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
Chris

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

I upgraded to the latest iTunes 10.2.2.12 and now it won't play any music. I can do everything else, except play music. I'm on Windows 7. Any ideas?

I upgraded to the latest iTunes 10.2.2.12 and now it won't play any music. I can do everything else, except play music. I'm on Windows 7. Any ideas?

i had this problem and finally figured it out. all that you need to do is go to your start menu and click on computer. select your main drive, (local drive) c usually. Next open the users file follow by your user name file, which is just like it sound it is a file labled as whatever your name is as you have it on your computer. Then you open up the AppData file. Next open the Roaming file. After that open the Apple Computer file followed by the iTunes file. Now you should see the folder labled iTunes Plug-ins folder. Now just Delete that folder. After that go to your iTunes and play your music.
If for some reason you don't see the AppData file you need to go to the upper left of your screen on select organize. a drop down menu will appear and you need to select folder and searc options. a small folder options window will appear. in this window you need to select the view tab. you need to select the show hidden files, folders, and drives bubble. now hit apply and then ok. that will allow the AppData folder to be seen.

Hi! I bought a song on itunes, and now it won't play on my computer or iPod. Itunes on my computer keeps telling me that I'm not authorized to play the song on my computer, even after reauthorizing it. Is there anything I can do to play the song?

Hi! I bought a song on itunes, and now it won't play on my computer or iPod. Itunes on my computer keeps telling me that I'm not authorized to play the song on my computer, even after reauthorizing it. Is there anything I can do to play the song?

Hello
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best of luck,
Mario

I know it's a little late but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play my music. It will play spotify and YouTube music but not my music. Everything else works fine but when I go to play a song it just skips to the next. Why

I know it's a tad late, but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play any of my music. It will play Spotify and YouTube just fine, but it won't play my music. It will just skip to the next a d the next and the next after a second or two without any sound. Please help! Thank you.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I have 2 ipad ist generations. I updated one to OS and now netflix won't play on it but my nonupdated one still plays netflix

I have 2 ipad ist generations. I updated one to OS and now netflix won't play on it but my nonupdated one still plays netflix.

I have the iPad2 with IOS5 and Netflix works fine with the Netflix application - I didn't try from Safari.
It shouldn't behave differently between iPad1 and iPad2.

Updated itunes and now it won't play any of my music, updated itunes and now it won't play any of my music

i updated my itunes, and now it won't play any of my music. i tried deleting it and reinstalling itunes, but it still is doing the same thing: whenever i click on a song, it looks like it's going to play (and my last.fm thing starts scrobbling it) but it just doesn't play the song, ever. it sits there, with the play button played. i am so frustrated with itunes, and i have no idea how to resolve this.

Hi ryanmar,
If you are having issues with audio playback in iTunes for Windows, you may find the following article helpful:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Regards,
- Brenden

HD version of TV show and my mac won't play

I accidently purchased the HD version of TV show and my mac won't play them so I paused the download. Anyway to cancel and download the SD instead?

iTunes: Frequently asked questions about viewing and syncing videos - http://support.apple.com/kb/HT2729 - including file formats supported by iTunes and on mobile devices, DVDs, etc.
iTunes: Purchasing and viewing HD videos - http://support.apple.com/kb/HT3209 - "When you purchase an HD video on a supported device or computer, only HD video will be downloaded. To download the SD version, you need to download the video again from your Purchased page." Other details about which formats are downloaded and when.

I downloaded a rental movie, and now it won't play. I get an error message that says "We could not complete your iTunes store request. An unknown error occured. (-42110)" This computer is authorized, and I am online and I've downloaded rentals b4. Help?!?

I downloaded a rental movie, and now it won't play. I get an error message that says "We could not complete your iTunes store request. An unknown error occured. (-42110)" This computer is authorized, and I am online and I've downloaded rentals before. Help?!?

Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Upgraded to the latest Keynote (5.3 1170) and now videos won't play in presentation mode, only audio

Upgraded Keynote on my home and work computers to the latest version in the AppStore and now videos won't play in presentation mode. In edit mode you can double click and it will play in the editor. This happens on both computers running the latest version of ML (10.8.4).
Any help here? Alread tried a reinstall of ML on one machine with no luck.
Was previously running Keynote 08 (non AppStore version). Tried creating brand new presentations in 09, no luck.
-steve

I had the same problem today in front of an audience with 300 people (MacbookPro OSX 10.10, Thunderbolt-VGA adapter, PPT 14.4.6).
Here what I figured out so far:
1. It happens when you have PPT open and connect to beamer afterwards
2. You can resolve it (in my case) by quitting PPT and launching it WHEN connected to beamer
3. Yet, make sure Mac does not go into sleep mode or you get a lock-screen in the waiting time. if you do so, you get back to square 1. quit PPT again 2. restart it.
4. Also.... in one case I had to hit the volume control once to get the sound back even though movie was playing
So in short: Connect to beamer first, then launch PPT
I know it is only a symptom fix but it worked for me

Bought an album and now it won't play!

I bought an album off of itunes store and it shows in my purchased and also in my music library, but it will not play. I push play and it stays at 0:00 and i'll move the dot to another time in the song and it still won't play. Anyone know whats wrong? I'm so mad if i can't do anything about it!!!!

Hi There
I suggest contacting the Apple iTunes Store by clicking the report button in your iTunes purchase history (Step by step guide for doing this: http://support.apple.com/kb/HT1933) or by filling in the form at http://www.apple.com/support/itunes/store/browser
Hope this helps
J.C

Burned and purchased songs won't play in iTunes

My wife got a new computer. Really nice rig. Runs Windows 7. And with that a new iTunes installation (she never installed the new one. she doesn't like change). All the songs she burned from CDs, and I was just informed all the songs she's bought, show up in iTunes, but won't play (I imported ALOT of stuff from an external HD onto the new computer). The music files still exist in the iTunes music folder. She can even play the song if she manually clicks on the file in that folder. But try to play the same song through iTunes and no luck. It's rather frustrating for her. And this kind of stuff doesn't exactly endear me to iTunes stuff either (and don't get me started on GameCenter on my iPhone).
Anyone know what's causing this issue and how to fix it?
Thanks.

The folder you see as My Music is really called Music. Windows will present such special folders with different names depending on the context, so the same folder on my computer when viewed from another user's account would show up as Steve's Music.
What we haven't established yet is the layout of the (original) media folder which is why I suggested the other route first followed by a clean up, however I was going to recommend that you rearranged things into the standard layout and from what I can see there is no reason why it shouldn't work if you just put things where they are expected to be right now.
Here are the typical layouts for the iTunes folders:
Note that in the newer layout all artist folders go into a Music subfolder within the media folder.
If you move everything that is currently inside iTunes Music into iTunes Media, including the hidden file iTunes Preferences.plist, iTunes should pick it all up without further problems.
Once iTunes is in touch with the media if the artist folders are at the level of iTunes Media rather than iTunes Media\Music use the option File > Library > Organize Library... > Rearrange files in the folder "iTunes Media".
tt2

I upgraded my iphone 3GS and now it won't play sounds from apps or music. I also cannot sync my music onto my phone.. PLEASE HELP! :(

Hi Guys
I recently upgraded my iphone 3GS to the new ioS 5.1. After I did this and synced my phone, it won't let me play any audio from apps, itunes or music. It will allow the phone to ring but that is all. When I use viber I have to press this button and change it from docking to iphone. I take it that the phone thinks I'm permanently on a docking system.
It also will not sync my music back to my phone. My music is on itunes but it won't let it sync.
I have restored my phone twice and it still won't work - HELP!! Please???

Your device is broken. If you want a device that works better than the one you have now, then you'll either need to bring your phone into Apple for out of warranty exchange ($149), or find a 3rd party repair shop in your area and see what they can do, if anything at all.

HT1550 I purchased a song from iTunes on my iPhone, downloaded the song and now it won't play?

I purchased a song from iTunes on my iPhone, downloaded the song and now I am unable to play it on my iPhone. It just keeps skipping to the next song and won't play it on my iphone but rather only on my laptop.....

Hey pnazaryan
If the purchased content is not playing, delete the songs from the Music app by swiping at the song. Then go through the process of downloading the track again.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Xserve and Compaq HSG80 won't play nice.

Similar Messages

Maybe you are looking for