XServe RAID email notifications

Hello All,
I'm a bit stumped on this one. I've never had trouble sending email notifications from an XServe RAID before. But, despite several different attempts to several different SMTP servers both internal and external, I just can't get it to send a notification message. Has anyone come across something like this?

We are having the same problem.
XServe RAID should send mails, but NOT with a local account (it's not allowed to have an additional mail server in our company).
We tried various mail accounts (google, yahoo etc.) without any success. Unfortunately there are no seetings in RAID admin available how to configure SMTP server authentication, no port etc. Additional, there is no information about the sending process, not even a log file...
So, is there any solution?
Best,
tom

Similar Messages

Xserve RAID email problem notification problem

Hello,
I had a big problem last week with losing a lun on the Xserve RAID, after rebuilding the raids and replacing the data, I can no longer send email notifications, I can add email addresses, but nothing happens during email tests.
Any ideas where to start looking?
Thanks in advance,
Michael Germana

I also have this problem but it has been since we first installed the system. Test e-mails don't go out, nor do actual alert e-mails. There is nothing on the SMTP server to evidence that it is receiving any notifications to send, let alone denying any e-mails.

Intel Xserve + Xserve RAID + SCSI

I have a requirement for an Intel Xserve system that I can connect an Xserve RAID and SCSI tape autoloader to. It seems that Apple won't let me configure a system with a SCSI card and a fibre channel card in it at the same time, and repeated phone calls to them have yielded precisely nothing (very disappointed with the lack of professionalism and knowledge displayed by the Apple sales and tech staff on this matter).
Can I have such a configuration? It seems that I can only fit a fibre channel PCIe card in expansion slot 1 as it is too long to fit in slot 2 which is limited to 6" long cards. I've seen that Atto do PCIe SCSI cards but there is no mention on their site about whether they will fit/work in slot 2 of an Xserve and emails to them have gone unanswered.
If anyone has any info on this, or could point me in the direction of the info, I would be very grateful. Or if what I want isn't possible, ideas on how to back up a 7TB array without direct attached tape storage would also be appreciated.

Actually, having just looked at the store, Apple
don't seem to offer any PCIe SCSI cards, just a PCI-X
one with a PCI-X riser. Would this configuration stop
me using a PCIe card in slot 2?
Avoid the Apple BTO SCSI card like the plague. It's junk.
It's really a rebranded LSI Logic 22320. Ours never worked
right in our Xserve G5; we replaced it with an ATTO UL4D and
all of our problems went away. The right card for the intel
Xserve is the ATTO UL5D or UL5D low profile (both are PCIe).
Link is here:
http://www.attotech.com/hostadapter.html
The Apple-rebranded LSI Logic 22320 sits on a shelf gathering
dust.
Russ
Xserve G5 2.0 GHz 2 GB RAM Mac OS X (10.4.8) Apple Hardware RAID, ATTO UL4D, Exabyte VXA-2 1x10 1u

Email notification of temperature rise?

Is there a way to set up a notification on Xserve that will send me an email when the inlet temp reaches a certain preset level? For example: Inlet temp hits 80 degrees, system sends me an email.
thanks

This happen automatically if you've configured email notifications via Server Monitor.

Advice on Xserve Raid

I need advice please. I want to buy the following second hand. is this a worthwhile buy or is it an old model of Xserve RAID? Can 400GB HDs be put in in place of the 250 GB?
Xserve RAID Chassis
14x250GB Hard Drives
2 SFP Controllers w/ 512MB Cache ea
2 Battery Cache Modules
2 Power Supplies
2 Cooling Modules
Rail Kit
2 Apple AC Power Cables
The owner will also throw in the PCI SFP card (pulled from the Xserve that ran this array) and SFP cables.
PowerBook G4 Mac OS X (10.4.7)

The Xserve RAIDs haven't changed physically since they were upgraded from the 180 GB drives (which used an HSSDC2 connector instead of the SFP connector that the current ones use).
You can use larger modules (up to 500 GB) but if you want full functionality (i.e. notification of drive failures) and optimal performance you need to purchase full Apple Drive Modules. Removing the 250's from the modules and replacing them with your own drives may give up some functionality, and it will certainly void the warranty on those drives. To use drives larger than 250 GB, you need to ensure you're on the latest firmware version -- 1.5 as of this note. You can check the firmware version using the RAID admin application.
As far as the 250's... in general the drives are probably good for about 3 years of 24x7 use. So that's about 26,000 hours. In RAID Admin, with the 1.5 firmware, you can check the power on hours of each drive. So I'd advise checking this, and based on the number, decide whether you want to upgrade, depending on whether you really need more capacity than the 2.8 TB usable that 14x250 will give you in a RAID 50 configuration.

G500 need help with Intel Rapid Storage Technology email notifications configuration.

I have a new Lenovo G500 laptop running Win 8.1. I have discovered the Rapid Storage Technology icon and have been trying to set up email notifications in Preferences using the desktop interface.
Without going into a lengthy description about what I have done already, I can tell you that I have configured the Email Preferences so the test email does not fail immediately, but it does not send the email, either; it just spins In Progress without stopping until cancelled manually using the button. I get no error messages.
I have looked at firewall and allowing IntelCpHeciSvc.exe through because I wanted to see if it made a difference; I have looked for Intel entries in System Configuration & Task Manager Services to try and find a reason for the test email not sending, there.
I have the correct SMTP host address and corresponding Port correct, having gleaned the info from BT's web site, and all the email addresses I have included are active.
Can anyone suggest what I am failing to address?
Moderator Note; subject edited

Hi,
IRST(Intel Rapid Storage Technology) is mainly used for RAID setup and management.
According to Intel, it provides benefits to users of single drives as well.
http://www.intel.com/support/chipsets/imsm/sb/CS-020784.htm
It's recommend you install the proper version which is applied to every OS.
Pre-OS install driver is mainly basic driver used to make sure boot system successfully. Post-OS driver is primarily intended to some function working better.
Karen Hu
TechNet Community Support

Server Monitor Version 1.6.1 (2) won't send email notification

I am running Server Monitor Version 1.6.1 (2) on a Mac Pro 10.5.8. It is monitoring an Intel XServe 10.5.8 and a Dual G5 XServe 10.4.11.
I had a bad UPS and Server Monitor only emailed notification of the 10.4.11 XServe going down but not about the 10.5.8 Intel XServe going down. I checked the log for the Intel XServe and it says, "Email notification could not be sent to ..."
The email notification settings are the same for both Servers.
Any ideas how to get email notification working for the Intel XServe.

A little more info...
Also, the G5 XServe uses it's actual IP address while the Intel XServe uses a different IP because of LOM.
The G5 Xserve requires password authentication to change email settings while the Intel XServe does not.
ANY suggestions here???
Thanks!

How to find drivers for XSERVE-RAID module bought 2 years ago?

Hello,
2 years ago, we puchased a Xserve raid module. About 3 months later, they came up with the Primse Vtrack. Now we are looking to add drives to our old X-Serve-Raid module and we can't find anywhere to buy them. Any idea? it is currently loaded with Hitachi Deskstar 250GB Drives (from teh sticker on the drives)

I believe they are still available at a massively overinflated price as Apple Service parts. Over here in the UK the only places I have found them is on eBay and on http://www.scrumpymacs.co.uk/ (Scrumpy Macs) - email them if you can't find them on the site. They sell drives with ATA drives, or just the bare caddies.
I've recently had to increase storage on a budget so purchased 10 caddies, then 10x500 GB drives for them from a 3rd party supplier which are the same drive used in 'legit' drive modules.
Hope that helps

SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification

I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.

Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered

Facebook Notifications and email notifications on ...

Hi
Is that possible Facebook Notifications and email notifications on sleeping screen nokia 808 like it had on N9..
On my 808 it shows only msgs and miscalls....any fix??
Thanks

not possible unless the app supports that behaviour. but email notifications and on notification lights has been broken on Symbian for a while, and as Symbian is in maintenance mode, is unlikely to see a fix, possibly ever.

Procedures and Email Notifications

boldEN*bold*
Hi everyone!!
In my BPM development, i'm trying to automatize the email notifications, based on due process periods. Also, I need to inform, based on the delay, some other participants that escalates the alarm message.
Is it possible to do it using an "E-Mail Notification" component that can be reused during all the process, even that the interval conditions and informed users varies upon each activity.
Is there another way to solve it?
Thanks
boldSP:*bold*
Saludos a todos!
En mi desarrollo BPM requiero automatizar el proceso de envio de email, al caducar ciertas actividades. Basado en ello, el tiempo de caducidad varia de acuerdo a cada actividad y al usuario, ya que varian tanto los intervalos de aviso, como los correos y su escalamiento en caso de demoras mayores a lo solicitado.
Pienso que es posible tomar un procedimiento especializado que permita ser reutilizado en este y otros proyectos, a pesar de que requiera parametrizar tanto los usuarios "base" y "escalados", como los intervalos de alarmas, durante el proceso.
¿ Existe otra forma de realizarlo?
Gracias,

I think I understand what you're after. I think you want to use the same escalation logic for all of your processes and instead of embedding this in every process you want something reusable. If this is not the case, read no further.
While you can do this, there are still going to be 5 things each process would still need to have inside of them:
<li> your process would need to set the "deadline" predefined variable to the intial timeout (2 hours in the future in your example)
<li> your process would need an Exeption Handler needs to be added with an Exception transition set to "Instance Expiration"
<li> your process would need an Integer instance variable "alertLevel" to keep track of the current level
<li> your process would need a String instance variable "currentlyAssignedTo" to keep track of who's supervisor you want to notify
<li> your process would need an Automatic activity with one line of logic inside it.
You could have the Exception transition leaving the Exception Handler activity go to a subprocess using a Subflow activity. This subprocess would send the emails, determine the new deadline interval, determine the new priority of the instance, look up the currently assigned user, manager and supervisor's email addresses and send the email(s). The subflow would have two input argument variables (alertLevelArg and currentlyAssignedToArg). In the Begin activity, these arguments would be mapped to corresponding instance variables. Inside this subprocess there would be an automatic with the logic to send the email to the user / manager / supervisor based on the alertLevel instance variable. This subprocess would pass back out through its output argument variables the new alertLevelArg, and new deadline (a time argument variable set to some time in the future based on the new alert's level).
Once the instance in the called subprocess completes, the output arguments need to be mapped to the original process's "alertLevel" and "deadline" variable. From the Subflow activity, you'd have an unconditional activity that flows into an Automatic activity via an unconditional transition. This automatic activity would have the single line of logic "action = BACK" so the instance is sent back from the Exception Hanldler's flow back to the activity inside the process it was in when the Instance Expiration exception occurred.
Avoid hard coding the values of "2" and "5" and "8" for the number of hours to have elapse inside your logic. Instead make them business parameters capable of being edited by an business owner.
Dan

How to cancel email notifications in ical?

Please help.
I share a work calendar with a colleague via ical and syncing via mobile me.
When I as the "owner" of the calendar send or update an event in ical my colleague recieves an email notification.
I update the calendar many times each day and each time an email notification is recieved by my colleague in mac mail....this is proving very boring and unnecessary and meaning he is getting more than 50 emails a day referring to our shared calendar .
Is there any way to cancel these email notifications as we always have our calendars open and can see the updates / changes?
Many thanks

I have the exact same problem. No one out there with a solution??
thanx

Cannot Send Email Notification Using Stored Procedure.

Hi Friends,
I tried to execute this job scheduler...
begin
dbms_scheduler.create_job(
job_name => 'ILMS_JOB_SCHEDULE'
,job_type => 'PLSQL_BLOCK'
,job_action => 'begin ilms.check_reminder(); end; '
,start_date => SYSTIMESTAMP
,repeat_interval => 'FREQ=DAILY'
,enabled => TRUE
     ,end_date => NULL
,comments => 'Ilms job schedule for notification.');
end;
However, since the effect is too long I rescheduled the frequency to be every one minute in this set attribute...
BEGIN
DBMS_SCHEDULER.SET_ATTRIBUTE(
          name => 'ILMS_JOB_SCHEDULE'
          ,attribute => 'repeat_interval'
          ,value => 'FREQ=MINUTELY;INTERVAL=1'
DBMS_SCHEDULER.DISABLE('ILMS_JOB_SCHEDULE');
DBMS_SCHEDULER.ENABLE('ILMS_JOB_SCHEDULE');
END;
Check Reminder is the stored procedure invoked by job scheduler to check values in database columns before sending email notification to the respective recipients' email address and also the format of the email notification to be sent to the recipients...
CREATE OR REPLACE PROCEDURE check_reminder AS
NO number;
CURSOR emp_cur is
select * from pergerakan_ks where TASK_FLAG=7 and TASK_STATUS='InProgress';
emp_rec emp_cur%rowtype;
email_to varchar2(200);
default_email varchar2(200);
mesg varchar2(4000);
no_kes varchar2(100);
subj varchar2(4000);
kpi number;
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
BEGIN
default_email:='@abc.com.my';
FOR emp_rec in emp_cur
LOOP
if emp_rec.PKS_TKH_TERIMA is null then
dbms_output.put_line('count day ' || round(sysdate - to_date(emp_rec.pks_tkh_hantar)) || crlf || crlf);
if round(sysdate - to_date(emp_rec.pks_tkh_hantar)) >3 then
email_to:=emp_rec.pks_penghantar_id||default_email;
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
dbms_output.put_line('update old pergerakan pks_id : '||emp_rec.pks_id);
update pergerakan_ks set task_status='Done' where pks_id=emp_rec.pks_id;
dbms_output.put_line('insert new pergerakan ks : ');
insert into pergerakan_ks(pks_id,pks_ks_id,pks_km_id,pks_penghantar_id,pks_tkh_hantar,
pks_penerima_id,pks_tkh_terima,task_name,task_owner,task_status,task_flag,fb_id)
values(pks_id_seq.nextval,emp_rec.pks_ks_id,emp_rec.pks_km_id,
emp_rec.pks_penghantar_id,sysdate,
null,
null,emp_rec.task_name,
emp_rec.pks_penghantar_id,
'InProgress',6,emp_rec.fb_id);
commit;
e_mail_message(email_to,email_to,subj,mesg);
end if;
end if;
if emp_rec.PKS_TKH_TERIMA is not null then
dbms_output.put_line('emp_rec.pks_km_id ' || emp_rec.pks_km_id || crlf);
select c.KM_KPI into kpi from keluar_masuk_ks c where c.KM_ID = emp_rec.pks_km_id;
no := round(sysdate - to_date(emp_rec.pks_tkh_terima))-kpi;
dbms_output.put_line('count day - kpi' || no || crlf);
dbms_output.put_line('kpi ' || kpi || crlf);
if no = 1 then
email_to:=emp_rec.pks_penghantar_id||default_email;
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
email_to:=emp_rec.task_owner||default_email;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
e_mail_message(email_to,email_to,subj,mesg);
e_mail_message(email_to,email_to,subj,mesg);
end if;
if no = 3 then
select b.KS_BIL_NO into no_kes from kertas_siasatan b where b.KS_ID = emp_rec.pks_ks_id;
email_to:=emp_rec.task_owner||default_email;
subj:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
mesg:='Reminder untuk Membuat Tindakan Bagi No Kes '||no_kes;
dbms_output.put_line('Sending email to ' || email_to || ' subject: ' || subj);
e_mail_message(email_to,email_to,subj,mesg);
end if;
end if;
END LOOP;
END;
E_mail_message is the stored procedure invoked by the check_reminder to tell scheduler information of the connection and the email address of the recipients...
CREATE OR REPLACE procedure
e_mail_message
from_name in varchar2,
to_name in varchar2,
subject in varchar2,
message in varchar2
is
l_mailhost VARCHAR2(64);
l_from VARCHAR2(64);
l_to VARCHAR2(64);
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
l_mail_conn UTL_SMTP.connection;
mesg VARCHAR2( 4000 );
BEGIN
select a.SERVER into l_mailhost from email_setting a where a.SERVER is not null;
select a.USERNAME into l_from from email_setting a where a.SERVER is not null;
--UTL_SMTP.open_data(l_mail_conn);
mesg:= 'Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || crlf ||
'From: <'||l_from||'>' || crlf ||
'Subject: ' ||subject|| crlf ||
'To: '||to_name || crlf || '' || crlf ;
mesg:=mesg||message;
l_mail_conn := UTL_SMTP.open_connection(l_mailhost, 25);
UTL_SMTP.helo(l_mail_conn, l_mailhost);
UTL_SMTP.mail(l_mail_conn, l_from);
UTL_SMTP.rcpt(l_mail_conn, to_name);
UTL_SMTP.data(l_mail_conn, mesg);
UTL_SMTP.quit(l_mail_conn);
END;
I tried to execute to execute the e_mail_message procedure but received this error. Also, no notification sent to the email address...
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 99
ORA-06512: at "SYS.UTL_SMTP", line 241
ORA-06512: at "ILMS.E_MAIL_MESSAGE", line 33
ORA-06512: at line 13
Please help so that I can receive the email notification into my email...thanks in advance for your time..

user13281540 wrote:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 21
ORA-06512: at "SYS.UTL_SMTP", line 99
ORA-06512: at "SYS.UTL_SMTP", line 241
ORA-06512: at "ILMS.E_MAIL_MESSAGE", line 33
ORA-06512: at line 13This is not an Oracle error - this is the mail server saying "+hey, I don't like that e-mail address you are supplying, I'm not accepting it!+".
If you look at RFC821 (Request For Comments memo 821 describes the SMTP specifications), you'll see that the sender and recipient needs to be supplied in the format +<[email protected]>+, e.g. +<[email protected]>+.
I have found that not all SMTP servers are equal in this regard. Some may insist on the brackets around the address, some may not.
You need to confirm the format of the addresses you use in the "+MAIL FROM+" and "+RCPT TO+" commands.. and ensure that these formats are accepted by your SMTP server - and if not, change your code to use an acceptable format.
The easiest way to do this is using telnet - and interacting directly and manually with the server. SMTP is a clear text protocol and easy to use manually. Try it. It is the best way to test SMTP interaction and validate the approach and SMTP commands and arguments used by your code.

Cannot send email notification to more than one people

Hi everyone,
Hope anyone could help me to solve this. I want to send email notification to two people. First to the staff to alert him that his claim is ready. And also to his supervisor that the claim has been disbursed. Below is the PL/SQL procedure, check_claim being used..
CREATE OR REPLACE PROCEDURE TEST.check_claim AS
NO number;
CURSOR emp_cur is
select * from emp where dept=7 and status='active';
emp_rec emp_cur%rowtype;
email_to varchar2(200);
default_email varchar2(200);
mesg varchar2(4000);
subj varchar2(4000);
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
BEGIN
default_email:='@phantom.com';
FOR emp_rec in emp_cur
LOOP
if emp_rec.claim_status ='Y' then
email_to:=emp_rec.staff_id||default_email;
subj:='Claim No'||emp_rec.claim_id;
mesg:='Your claim has been disbursed. Please check.';
email_to:=emp_rec.staff_hod||default_email;
subj:='Claim'||emp_rec.claim_id;
mesg:='Claim No'||emp_rec.claim_id||' has been disbursed';
e_mail_message(email_to,email_to,subj,mesg);
e_mail_message(email_to,email_to,subj,mesg);
end if;
END LOOP;
END;
The first email_to is to be sent to staff_id and the second email_to is to be sent to staff_hod.
The PL/SQL procedure then called the e_mail_message procedure shown below for the connection information..
CREATE OR REPLACE procedure
TEST.e_mail_message
from_name in varchar2,
to_name in varchar2,
subject in varchar2,
message in varchar2
is
l_mailhost VARCHAR2(64);
l_from VARCHAR2(64);
l_to VARCHAR2(64);
crlf VARCHAR2( 2 ):= CHR( 13 ) || CHR( 10 );
l_mail_conn UTL_SMTP.connection;
mesg VARCHAR2( 4000 );
BEGIN
select a.SERVER into l_mailhost from email_setting a where a.SERVER is not null;
select a.USERNAME into l_from from email_setting a where a.SERVER is not null;
--UTL_SMTP.open_data(l_mail_conn);
mesg:= 'Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || crlf ||
'From: <'||l_from||'>' || crlf ||
'Subject: ' ||subject|| crlf ||
'To: '||to_name || crlf || '' || crlf ;
mesg:=mesg||message;
l_mail_conn := UTL_SMTP.open_connection(l_mailhost, 25);
UTL_SMTP.helo(l_mail_conn, l_mailhost);
UTL_SMTP.mail(l_mail_conn, l_from);
UTL_SMTP.rcpt(l_mail_conn, to_name);
UTL_SMTP.data(l_mail_conn, mesg);
UTL_SMTP.quit(l_mail_conn);
END;
However, the email notification only being sent to the supervisor / head of department. The staff concerned does not receive any email notification. Please help. Thank you for your time...

from wht i see
email_to:=emp_rec.staff_id||default_email;
subj:='Claim No'||emp_rec.claim_id;
mesg:='Your claim has been disbursed. Please check.';
email_to:=emp_rec.staff_hod||default_email; -- wrongit should be
email_to:=emp_rec.staff_id||default_email;
subj:='Claim No'||emp_rec.claim_id;
mesg:='Your claim has been disbursed. Please check.';
email_to:= email_to || ' , ' || emp_rec.staff_hod||default_email;

Auto-included link to list item not working in Workflow or email notification

I made a workflow straight from my SharePoint site--NOT from SharePoint Designer. (My computer is still running on Windows XP, so I can't download Designer until my boss upgrades me to a newer system.) When creating the workflow, you have the option to include
a link to the list item by clicking a checkbox. The links don't work in either the email notification or in the workflow properties. Extra characters are being added for some weird reason. (For example, the correct link looks like "https://www.w14b.comcast.net/sites/<yada
yada>.docx" and the links in the workflow and email look like "http://www.w14spw-po-b1.com/sites/<yada yada>.docx") I see no place to edit the URL. How do I fix the links???

Hi,
Please check if the http://www.w14spw-po-b1.com/sites/ is the url of default zone of the web application where this site resides.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/d17ad498-0b6f-4b12-9885-b8057fa04d88/sharepoint-2010-workflow-inserting-link-to-list-item?forum=sharepointgeneralprevious
In addition, Windows XP SP3 is supported for SharePoint designer 2010:
http://www.microsoft.com/en-in/download/details.aspx?id=16573
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

XServe RAID email notifications

Similar Messages

Maybe you are looking for