Xserve RAID NO Power, need help please
HI all,
i have Xserve RAID, last night i shut down it normally, today i came to switch on, but its not responding, i can see only the Green LED on the power supply is blinking. NO POWER.
please if you can help ASAP.
thanks
hi
thanks for your reply,
i have tried to do everything, i removed one of the power supplies at each time, but same. i pressed the power button on the back, but nothing happened.
finally i opened the case of the XSR, i was surprised to find that the power cable between the power button on the back and the main board is disconnected, how i don't know, i never open it before, i vever move it, i don't know it was just disconnected.
any way, its working now, thanks all
Similar Messages
-
Xserve raid midplane(?) troubleshooting help
Hi,
I just inherited an XServe RAID with 12 180GB drives. My question is thus:
If I put the single RAID controller in the top slot, It recognizes all drives on the left side of the RAID, which is expected
If I put the single RAID controller in the bottom slot, it does not recognize any drives in any slots even if I swap those drives from the left side to the right (to rule out 5 bad drives.
I have two empty sleds that are on the right side of the RAID as well.
I am guessing, having never owned one before, that this is likely a problem with the midplane. Is there a way to troubleshoot the midplane? I very quick inspection, didn't reveal anything that was obvious. I plan on doing a more thorough inspection over the weekend.
I am also making the assumption that I do not have to have a controller in the top slot for the bottom controller to work since the top controller works without having a controller in the bottom slot.
Any help/insight would be appreciatedLIttle Update in case it would help someone with more knowledge of this than I:
When the Controller is in the lower position:
or
which I find interesting since I don't have an upper controller installed and the cooling modules both show as missing even though they exist (though 1 is failed).
If I look at the other tabs:
Info: Shows only Name: XServe RAID and Power State: On
Arrays & Drives: Shows Not Installed for all drives on that side of the XServe RAID
Fibre Channel is blank as I don't currently have it connected to my XServe
Events shows nothing of significance to me other than all disks online
When the controller is in the upper position however:
I am curious as to why the RAID controller shows as present in both slots when it clearly is not however.
Hoping it was just a cable from the midplane to the unit, I swapped cables this morning hoping for a failure, but did not get such failure, so I have ruled out the cable. The Controller seems to work when it is in the top slot, so I think that the controller is likely good as well. So I guess I can sum it up as:
Power supplies: Good x2, shows a green light in either slot, swapped in testing
Batteries: Good x2; Swapped in testing, Swapped in testing, works in upper slot, does not in lower slot
Cooling Unit: Good x2; Swapped in testing, works in upper slot, does not in lower slot
Controller: Good x1; works in upper slot, does not work in lower slot
Which leads me back to the midplane as there isn't much else inside this unit that I can see that could go wrong. Does this sound like an accurate assessment? I ask because I want to be confident I have found the issue prior to ordering a new backplane.
Once again, thanks in advance for any information. -
HI. When I plug in my charger and use my macbook, I feel some kind of roughness on the body. It feels like some current flowing around it. Need help please.
My 2006 MacBook Pro and my 2011 MacBook Air both do it. It happens because the earth ground stops at the power brick and is not carried through to the case of the machine. It is not dangerous or the machine would not have been UL approved.
Since I operate on battery 99.9999% of the time it doesn't bother me at all. -
How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks
Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!
I got it figured out myself... yaaaaay for me!
-
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
Bought a new macbook and want to manually manage music onto my iphone 4s (as it is already full of music from old windows laptop) but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!
Before you sync your iPhone make sure that all the music that was synced to your phonereviously has been copied to your iTunes on the new MacBook Pro. Then when you connect your phone you will be able to either sync all music or select only those playlists that you want on the phone.
-
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Contact iTunes
Contact iTunes -
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. When I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling -
i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.
To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
Connect your iDevice to your PC.
Launch iTunes,
Click on the device name on the left side of the iTunes Window.
Click on the Photos Tab in the iTunes window on the right.
Untick all of the photos or albums that you want to remove.
Click on Apply in the lower right corner of iTunes
If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync. -
My iPhone 6 can't find my macbook pro on the airdrop list, although everything is in place, bluetooth, wi fi gets, need help please ?
Dear Niel, thank you but my mac is (MacBook Pro (Retina, 15-inch, Early 2013).
and i can send from it to my iPhone , but not vice versa -
After many months of non-use, when I tried to open Photoshop CS4 Extended, I got an error message 148.3. "Licensing for this product has stopped working." I need help, please.
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
Mylenium -
I need help please I keep getting error messega 21 when i try uploading my iPhone 4 s!!!!!!!!! omg some one please tell me if and how to fix this please. thank you!!!
Hopefully this link will help you: http://support.apple.com/kb/HT2109
-
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
-
After updating my Iphone 5 my lock button isnt working well .... Need help please ..
After updating my Iphone 5 my lock button isnt working well .... Need help please ..
First, read here:
https://ssl.apple.com/support/iphone5-sleepwakebutton/
See if your phone is affected.
Maybe you are looking for
-
WebServer 6.1 SP3 SSL reverse proxy to Sun One Application Server 7
I have an application in the appserver7 that requires SSL authentication. I have already installed a self cert in the appserver7, and the authentication works fine when I browse directly to the appserver. The appserver7 has both listener for port 80
-
Create lock object with fun command
Hallo, Is it possible to create a lock object with the fun command? I tried to use: FUN ( ENQUEUE _<lockobject> , <interface> ). When I fill the importing parameters, execute the script and afterwards refresh the interace than the import parameters a
-
How do I create a web streaming app using digital publishing suite?
Hello, and thank you in advance. I'm looking for tutorials and guides on how to create a web streaming version of an app using digital publishing suite. Can anyone point me in the right direction.
-
Re: we do not recognize your sign in details
Few days ago I was kicked of my skype. Trying to log in again produced the same result: we do not recognize your sign in details. Meanwhile I created a new account, but lost important contacts. The problem is that I can not access registered email ac
-
Basics, On/Off, Quiting Ap and Grey Screen
Just got my iPad, and even though reading the User's Manual, having a hard time with the simplest things: 1. How do you turn it off? 2. How do you quit an application? Safari seems stuck, kind of problem I would normally deal with first by restarting