Xserve Raid not recognized by Disk Utility

My Xserve Raid is recognized when I run the RaidAdmin utility. I can create new arrays everything shows up without any problems. I updated the firmware for the Xserve Raid using just the ethernet connection to administer it. Changed the card and the cables that are used to connect the Raid server to a G5 server, but it still does not get recognized by Disk Utility. I am at a loss of what to do next. I have green lights for everything....no problems showing up in RaidAdmin. Please, please help....

Hello
I have the exact same problem: after updating java and rebooting the server, the raid array is no longer visible. Everything is green, no errors in the log files, fibre channel is up and running, BUT: the array does not show with any SCSI address. LUN masking is off. Server is at 10.5.8 (intel). The array was mounting just fine before the reboot (and all before that). I've plugged the fibre channel into a PPC server, same thing: link ok, no SCSI. I'm reconditioning the drive at the moment, but it should still be visible.
Any help greatly appreciated.

Similar Messages

Hard drive not recognized in disk utility

I'm trying to replace the hard drive in my MacBook Pro , the old hard drive was not recognized in disk utilities after the computer crashed .After installing a new hard drive and booting from the original Mac OS install DVD,( leopard?) the new hard drive is not recognized either ? Help

It may be the internal connecting cable that is the problem. If you can install the new HDD in an enclosure, connect it to the MBP, then see if you recognize it using the OSX installation disk. If so, the internal connector should be replaced.
Ciao.

Hard crash now hard drive not recognized in disk utility.

During a virus scan the Macbook froze up now the computer does not seem to be accessing the hard drive. Tried to reinstall Leopard but the internal hard drive is not recognized (same is true when we tried to use Disk Utility). It will not start in safe mode either. Does this sound like a fried hard drive or maybe a corrupted drive that might be repairable with DiskWarrior? Any thoughts would be appreciated.

If the A/V you were using was Norton/Symantec, the drive may be OK. Norton is a virus.
Burn a Ununtu CD and see if you can boot into it and look at the drive before giving up on it.

Airport extreme hosted hard drive not recognized by Disk Utility

Hi, all. I've had success for a month now hosting a 4T hardrive wirelessly via my Airport Extreme. I use it for Time Machine backups and remote storage. So I'd like to repartition that hardrive via Disk Utlity, however Disk Utility no longer recognizes the 4T hardrive hosted via my Airport Extreme. How can I get my Airport Extreme external drive to show up in Disk Utility so I can format it again?

I'm not sure you're aware but I wanted to let you know that using an external drive connected to the Airport USB port as a Time Machine backup device isn't supported/recommended by Apple. don't be surprised if you think it's working and you go to use it to restore from a crash, and you can't. Just a warning.

XServe: Disks do not appear in disk utility

Hi,
I have the following problem with our Xserve (intel) with MacOS Server 10.6.4:
I have a bunch of firewire 800 external drives witch are daisy chained. They are configured as JBOD and were working just fine.
But suddenly they disappeared. I looked them up in the disk utility but coudnt find them there any more; but the system profiler still shows them in the FireWire tab.
This way it started: I cant attach external USB / FW Disks any more; they just do not appear in disk utility.
With another Mac I could verify that the disks are fine. The problem is with to the Xserve.
I even tred
Thanks in advance, Daniel

Hi Daniel,
Hope this doesn't sound silly but is the xserve locked or unlocked? If it is locked you need to unlock it for the disks to mount.
Hope that helps
Beatle

Improperly ejected external hard drive is not displaying on computer...not even in Disk Utility

My external hard drive has been repeatedly ejected improperly and now it is not displaying on my computer, not even in disk utility. How do I re-mount this external hard drive? In the past when this has happened, all I had to do was go to Disk Utility or use DiskWarrior to fix the issue but now it won't even show up in either of these apps.
Any help would be appreciated
2008 MacBook Pro 10.9.3, WD My Studio 1 TB External HD

From the menu bar, select
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
Start up in Safe Mode and test.
Reset the NVRAM.
Reset the System Management Controller.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

Replacement hard drive not shown in Disk Utility

So I just finished installing a replacement hard drive for my PB 12". I got a Seagate 2.5" ATA Momentus 5400 etc as per my previous thread. But after firing it up from the install disk, the new volume fails to show up. Anyone else had this problem? And fixed it? Opening up the case again now...

Don't know if your problem solved. Had the same thing happen to me. Was told that new HD was bad (unlikely), Logic board was bad (disaster). Then finally was tole by another tech (OWC) that it sounded like a bad cable connection. Took it apart again and reseated both ends of HD cable a couple of times. Started up and the HD recognized by disk utility. Works great since. Hope your problem as simple as mine.

External hard drive not showing in disk utility

my samsung external hard drive has always worked with no problem on my mac..
I have just plugged it in to do some work and it will not appear anywhere..
not even in disk utility
i have tried the USB port and it is working fine because i also have a mouse and that worked fine in that port..
PLEASE SOMEONE HELP ME!

Try following tips.
USB and FireWire Quick Assist - Apple Support

Thunderbolt WD Duo, does not show in Disk Utility

Hi Have imac 27 (late 2012) with 10.8.3 update OSX. Connecting to WD Thunderbolt Duo, the disk does not show in disk Utility, sys log or in any connection to the system. WD utility does not seems it either. Restart does not help. By disk returning to seller, the disk works fine on other comp (with the same cable, with the same power adapter)
Is there any issue known with the thunderbolt ports? Tried both all found on internet, but no resolution, to my issues.
Seems to be my imac hardware or maybee the software (thunderbotl 1.2) update.
Lukas

All thunderbolt port tried, cable exchanged, no change
I have done following procedure , no change
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it. I had it connected via ethernet and it still did not see it. Then i disconncectd it from ethernet and did the Wi-fi connection and am able to post this message but air port still does not see it.

Disk Utility will not "see" the Time Capsule, so no need to waste any more time on that issue.
but air port still does not see it.
Not sure what you mean by "air port" here.

Time Capsule Not Seen By Disk Utility, Not On Desktop

My 1T TC works like a champ and backs up as expected. Can TC be used as an ordinary external HD in addition to being the location of TM back ups. The TC does not appear on my desktop and is not discovered by Disk Utility.

Rocky,
Be very careful with the xxxxxx.sparsebundle file. That is an image of all of your Time Machine backups. Leave it alone unless you want to delete all of your backups.
If you do want to delete your Time Machine backups, use the gear icon just above the xxxxx.sparsebundle file. Click the .sparsebundle file to highlight it and select Move to Trash. This is only safe way to do this.
There is also an alternate way to delete your backups and wipe the Time Capsule clean if that is what you want to do. Open AirPort Utility, select Manual Setup, click on the Disks icon, then click on the Disks tab just below that and select Erase. This is probably the better option if you want to start over with a clean disk.
Now, if you want to create a folder or folders on the Time Capsule to move files into, use that same gear shaped icon in the preceding paragraph and select New Folder. Once you see the folder, you can rename it as needed. Create more folders in the same way. You can drag files into the folder from the desktop.
I haven't tried any kind of automated backups into the folders and don't know if this might be possible.
If you add folders and keep your Time Machine backups, Time Machine will leave the folders alone even if the TC is full and deleting old backups to make room for new Time Machine backups.
Hope this helps. Just be careful and you will be fine.

Lacie external HD not appearing on desktop but recognized in disk utility

Hi,
I have a Lacie 1Tb external HD. It worked fine when I first purchased it about 4 months ago but recently when I connect the external to my MacBook, it is not recognized in Finder nor does it appear on the desktop. However, when I open disk utility the external is recognized but I can't verify or repair it and there is no "mount point" associated with this drive. Has anyone encountered and fixed this type of problem.
Thanks

Try verify/repair the hard drive with disk utility. http://support.apple.com/kb/HT1782

Disk Utility not recognizing connected disks half the time

About half the time i run Disk Utility all i get is the Disk Utility window that's blank on the left side where my connected drives should be and in the main area of the DU window is the message "Gathering disk information" will a spinning wheel type thing under it. The only way i can quit DU is by forcing a quit. I don't have any idea why this happens so much. I've run repair permissions and repair disk from the install disk. No problems detected.
Any ideas?
thx
lenn

disk utility can only repair directly attached drives. it can not work on network drives like Time Capsule. but you can try repairing the sparse bundle itself. drag it to disk utility's left pane, select it there and choose "repair disk".

Striped RAID not recognized by Macbook Pro

I have a pair of external firewire 250GB drives that I had configured into a striped RAID set on my Powerbook Titanium. I recently purchased a Macbook Pro. When I plug the drives into the new machine, they are not recognized and the array (and I use the term loosely since it only refers to a pair of drives!) will not mount. When I launch DIsk Utility, the drives appear in the list and are offline. I cannot find a way to bring the thing online.
When I created the RAID, I used Mac OS Extended (Journaled) format. The disk set still works fine on my Powerbook and checks out fine with Disk Utility on that machine.
Does anybody have any suggestions on how to use my striped set on my new machine?

Hi, P. J.
Unfortunately, I don't have an answer for you, but — seeing as how your question has gone unanswered — I thought I'd offer the following hypothesis: I suspect it may have something to do with the different partitioning schemes used by PPC and Intel-based Macs.
Theoretically, "Any Macintosh computer running Mac OS X 10.4 and later can mount GPT-partitioned disks," per "Technical Note TN2166, "Secrets of the GPT." However, the RAID you created on your PPC-based Mac used the APM (Apple Partition Map) scheme.
Perhaps all the bugs haven't been worked out, esp. concerning RAID. For example, there is a known issue that some Intel-based Macs cannot boot from RAID volumes.
You may want to try your question on the MacBook Pro Discussion to see if others with your same Mac have had better luck. I'd also suggest providing more details (manufacturer, make, model, etc.) of the FireWire drives you've used in the RAID. If both are from the same manufacturer, then you might also want to check with the manufacturer to see if they've had similar reports.
One option, albeit a good bit of work, would be to backup the contents of the RAID to another drive, then recreate the RAID on your Intel-based Mac, restore the data, and see if that works on both your PPC- and Intel-based Macs.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Different capacity of array in RAID Admin as in Disk Utility

I've an XRAID controlled by XServe PPC with MacOSX 10.3.9.
In Lower Controller I've two arrays:
4x500GB drive=1,4TB RAID5,
2x500GB drive=0,931GB RAID0.
1x500GB drive as HotSpare.
I've expanded RID5 Set with 5th Drive (RAIDAdmin->Advanced->Expansion) - initialization take about 50 hours (but not the time is a problem).
My problem is that - after initialization RAIDAdmin shows that this Array has 1.82TB Capacity but Disk Utility show that this volume has only 1.4TB. I can format this volume, I can partition but I'm limited to this 1.4TB.
I've restarted Controler, restartet whole RAID, restarted ma XServe - but it give nothing. I've also do so: slice'ing and back - merging this Array. The same situation.
What should I do to have the right capacity?

The disk format comes from Disk Utility when you initialize it. When the raw RAID is created it is just raw storage that could be any format. When you create a partition in Hard Disk Utility is when the type of disk is chosen.
Mac OS Extended is HFS+. Unless you're doing disk heavy work like video editing or capture you probably want Journaling. I would stay away from Case sensitivity unless you're specifically working with Unix machines - especially on earlier OS X versions.
I'm a little confused from your post about where you are in the initialization process - it sounds like you've started it already. With 500GB drives expect it to take in the ~30 hours range. If you choose "Use RAID now" you've be able to format and use your during that 30+ hour initialization process but certainly not at anything like full RAID 5 speeds. If you can wait I would wait, but many people use it that way. Once your RAID is ready it should show up as the full size when you go to partition it.
HTH,
=Tod

Xserve Raid not recognized by Disk Utility

Similar Messages

Maybe you are looking for