Xserver-1.5.3 doesn't reset resolution after ending a full screen game

xserver-1.5.3 doesn't reset display resolution after ending a full screen game.
Is this a issue of the new xserver or the ati driver (i switched from catalyst to xf86-video-ati)?
And how can i solve it?
so long
ukognos
Last edited by ukognos (2008-11-30 18:01:19)

I have the same problem with catalyst 8.11 . On the game, if I change the resolution, the game halt.
I have Kde4 and a ATI HD 3450 and lastet upgrade...

Similar Messages

  • I recently had some repairs done to my ATT U-verse connection, and now my Safari doesn't open in a full screen.  How do I reset that to open in full screen?

    I recently had some repairs done to my ATT U-verse connection, and now my Safari doesn't open in a full screen.  How do I reset that to open in full screen?

    Mountain Lion is set up to close windows when you quit a program instead of saving them. To change this, put Safari in full-screen mode, move the cursor to the top, open Safari menu while holding Option key and close Safari from the menu.
    If you want to do it automatically with all programmes, open System Preferences > General, and deactivate "Close windows when quitting an application"

  • Safari 5.0.2 doesn't hide menu bar with flash full screen mode

    I have scoured these forums and others for an answer. I have deleted every little bit of Safari and Adobe/Macromedia/Flash preference file. I even tried using an older backup, which worked until I updated Safari on it.
    The menu bar won't go away!
    Is this a well known problem, or am I an unlucky slob?

    Unlucky so far, I'd say.
    So, picking something in particular so we're on the same page... does this refuse to hide the bar too?
    Is a New User Account the same ?

  • [Solved]Kwin doesn't restore Suspend desktop effects for full screen

    Hi! I am using latest Kwin with Plasma 5 on my Arch and I have noticed that I have to check "Suspend desktop effects for full screen windows" in Desktop Effects>Advanced every time I log in.
    What's wrong with Kwin?
    Solved: Kwin 5.2 is under development now so currently this functionality is not availible.
    Last edited by artem.jackson (2015-02-19 00:41:43)

    It saves the state for my NVIDIA blob but does not for Intel laptop. It also warns that not every setup is able to redirect, so maybe he thinks our cards are unsupported and unchecks it?

  • IPhoto 11 low resolution photo in full screen mode

    In the 09 version a low resolution picture is shown full on the screen, but can be a little bit blurry.
    In the 11 version the low resolution picture is shown small. How can we change that?

    I mean that a low resolution picture is shown as a small picture and can not be viewed as a large picture. In the old version a low or high resolution was shown the same. If it was a low resolution picture it would be a bit more blur. Now the picture is small and a higher resolution picture is shown full screen.
    Is this better?

  • Does anyone know why- when I iport a one minute video project into Final Cut X from I Movie the resolution that looked alright in IMovie full screen becomes worst in final cut, full screen...but clear when it is in still position?

    Does anyone know why- when I import a one minute video project into Final Cut X from I Movie the resolution that looked alright full screen in I Movie instantly becomes worst on full screen in Final Cut X...but clear again when I stop it to still position?

    I'm new to video editing but I think I recall seeing an option in FCPX which lets you choose the video quality for the preview window. I think the window reduces the quality when playing back for performance reasons and so perhaps that is why it seems to have less quality when moved over to FCPX? Just a possibility, I'm sure one of the more experienced users can confirm or deny this theory.

  • Touch screen doesn't work after resetting the phone. Could the screen be locked?

    After following the previous  touch screen not working message, I reset the phone but still doesn't work.  Could there be a screen lock?  Or any other way for the touch screen to work?

        Hi there Angelicness3011!
    The touch screen responding correctly is pretty important for you to even use your phone! I'm sorry to learn you've been having issues with it. Let's review some options together!
    You mentioned you reset the phone. Does this mean you removed the battery & put it back in? Or does this mean you able to complete an actual Hard Reset?
    Instructions on a Hard Reset can be found here: http://bit.ly/Q00sJ9
    Your information is generally backed up to Google or Backup Assistant and your SD Card. If possible, please sign in to double check.
    If you're unable to hard reset and removing the battery doesn't resolve the concerns we may have to look in to replacement. Does your phone have any physical or liquid damage? How long have you had your phone? Do you have insurance?
    I look forward to your responses!
    Melissa_VZW
    Please follow us on twitter @VZWSupport

  • Policy Agent doesn't reset Sun  Access Manager session time idle value

    Hi,
    We have the following setup in our environment:
    - apache web server/web and policy agent 2.2 for apache 2.0.54
    - webmethods portal server (jetty)
    -Sun Access Manager (with Sun Directory Server)
    We use policy agent for authentication purpose only (via Sun Access Manager/LDAP) when the users access the portal. We have custom code that creates session in Sun Access Manager for custom LDAP services. For testing purpose, we configure SAM session to have Max Session Timeout at 120mins and Time Idle at 15mins. I would assume that, after the initial login request, for all subsequent accesses to the portal the policy agent should intercept the request and reset the Time Idle value of SAM session. However, when I monitor time idle value using SAM console, session tab, the time idle value didn't change when the portal user access pages, submit actions, etc. I can see in the debug log of policy agent that requests are being intercepted/processed, but the time idle didn't get reset.
    Does anyone know if this is a bug in configuration or in policy agent itself or am I making the wrong assumption?
    Thanks a lot for the help.

    Thanks for the reply, Shivaram. The issue appears to occur at random time, not accurately at the 3 min interval as you mention. I tested changing this value to 1, theoretically, after one 1 minute of idle time, accessing a link would make the agent reset the time idle value for the user session in SAM, but it didn't even after 3 minutes. This seems to be either a policy agent or system access manager bug.
    We performed a 'vanilla' test using the apache server manual pages (only plain HTML, no POST requests), the pages are protected by the policy agent. At the first login, rwe were prompted to enter credential to be validated by SAM/LDAP, and then a user session is created in SAM session table. We browse around the manual pages, once in a while, certain pages cause the policy agent to reset the time idle. However, revisiting these links after a few minutes doesn't reset the idle value. Caching setting has been disable as well. Could there be or lack of some settings in AMConfig.properties or AMAgent.properties that might have caused this behavior?
    Thanks for all your help,

  • Hello I have a problem with my Iphone 5S and it`s under warrenty it doesn`t turn on and a blue screen cames up and it doesn`t reset what can I do, I live in Argentina Buenos Aires, please contact me soon, thank you

    Hello I have a problem with my Iphone 5S and it`s under warrenty it doesn`t turn on and a blue screen cames up and it doesn`t reset what can I do, I live in Argentina Buenos Aires, please contact me soon, thank you

    Where did you purchase the phone? Then, you can use this support document to find out how to contact Apple Support from your location. Contact Apple for support and service - Apple Support

  • The Iphone 4 patch IOS 7.6 is suppose to be a security update but it freezes the phone and doesn't reset. Help I need my phone. What makes the phone go back to normal? There is nothing but a simulated plug in wire and an ITunes icon on a black screen.

    The Iphone 4 patch IOS 7.6 is suppose to be a security update but it freezes the phone and doesn't reset. Help I need my phone. What makes the phone go back to normal? There is nothing but a simulated plug in wire and an ITunes icon on a black screen.

    Hi SDPISMENOW,
    If you are having issues updating or restoring your iPhone after attempting the iOS 7.0.6 update, you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • HT1212 How can I reset my Ipod's pass code, restoring doesn't reset anything and I still don't know my code

    How can I reset my Ipod's pass code, restoring doesn't reset anything and I still don't know my code?

    Passcode for what?
    Was the restore successful, that it did the iPod/iTunes go through all the steps without errors?
    For screen-lock passcode:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    For Restrictions passcode yo have to restore to factory settings/new iPod since restoring from a backup made when the iPod had the Restrictions passcode the Restrictions passcode willaalso be restored.

  • Ipod touch doesn't reset

    The iPod Touch 4thG IOS 6.0
    The iPod's screen is totally white and it doesn't reset, i tried to hold menu and power, put in dfu and to shut down, but it does't respond.
    and the iTunes doesn't recognize it.
    What can I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Resetting Resolution

    I changed the resolution on a photo to 500 in the export screen.  What do I reset it back to for the highest resolution.  I changed to 500 to email a photo.

    Thank you for your help.  Good to know you are there to help.
    In a message dated 3/13/2013 3:23:59 P.M. Eastern Daylight Time, 
    [email protected] writes:
    Re:  Resetting Resolution
    created by  djpaige_ (http://forums.adobe.com/people/dj_paige)  in 
    Photoshop Lightroom - View the full  discussion
    (http://forums.adobe.com/message/5138898#5138898)

  • Microphone doesn't work and screen resolution doesn't change to full screen

    my laptop is Toshiba Satellite M300, i dont know the series, this is information from bottom label
    TOSHIBA M300
    T660 2048 320 14WC DMD agnBT 6C VBX 1Y
    PSMDCL-08T010
    69080277W
    after i install windows 7,
    1.why the microphone doesnt work???
    2. why the sreen resolution not full screen when i play games??(in vista no proplem about the screen resolution)
    thank you..

    How did you upgrade? Clean?
    Did you get your drivers here?
    -Jerry

  • Full screen vertical scroller sometimes works, sometimes doesn't

    Curious to know if anyone else has had this problem or there's some information that my elucidate this mystery:
    Our publication ran a page with a full-screen vertical scrolling overlay today for the iPad. Inside of Viewer the folio flipped from page to page just fine, but once published we were unable to move between pages any longer once on this particular page. We've run full-screen vertical overlays before without incident and we're stumped to understand why the Viewer elicited no issues while the final publication did.
    I put this question to you, Forum: Any thoughts?

    Hey Lightgarden,
    Welcome to Apple Support Communities.
    From what I gather, your iPhone 4s intermittently stops responding and displays a blank black screen. If you haven’t already, take a look at the article linked below and try the troubleshooting suggestions that it provides.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If your device doesn't respond when you press buttons
    Your device might not return to the Home screen when you press the Home button, wake from sleep when you press the Sleep/Wake button, slide to unlock or power off, or it might appear frozen. Try these steps:
    Restart your device.
    If it still doesn't respond, or if it doesn't turn back on, reset your device.
    Get more help
    If you still need help after trying the steps above, contact Apple Support.
    Cheers,
    -Jason

Maybe you are looking for