Xserver not start after installing linux-sony [SOLVED]
hi
i have a vaio F111Fx laptop .
today i installed linux-sony kernel from aur and i have changed my menu.lst like this :
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /boot/vmlinuz-linux-sony root=/dev/sda1 ro quiet nomodeset vga=792 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons resume=/dev/sda3
initrd /boot/initramfs-linux-sony.img
but after this xserver does'nt start and when i login in tty and run xinit i get this eror :
X.Org X Server 1.11.1
Release Date: 2011-09-24
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0-ARCH i686
Current Operating System: Linux Mohammad 3.0-sony #1 SMP PREEMPT Thu Oct 13 02:02:16 IRST 2011 i686
Kernel command line: root=/dev/sda1 ro quiet nomodeset vga=792 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons resume=/dev/sda3
Build Date: 10 October 2011 08:49:15AM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 17 14:45:43 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
FATAL: Module nvidia not found.
(EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
(EE) NVIDIA: system's kernel log for additional error messages.
(EE) Failed to load module "nvidia" (module-specific error, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
what should i do now ? please help me
tnx
Last edited by MohammadR (2011-10-17 13:49:31)
https://wiki.archlinux.org/index.php/NV … tom_kernel
and
https://aur.archlinux.org/packages.php?ID=32908
Last edited by lowph (2011-10-17 13:39:14)
Similar Messages
-
Windows 8.1 is not starting after installing Bluetooth driver
I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
It was perfect before installing RaLink Bluetooth Driver update.
I use "HP ENVY 15 Touchsmart j001tx" laptop.
Please have a look on this articles also:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
Further information:
HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
Sushovan MukherjeeHi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1 -
Game does not start after installing on mac pro
Game does not start after new install on mac pro ?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
IPod service manager will not start after installing iTunes 10
iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).
-
CSA : Cluster not started after installing CSA 6.0.0.209
After installing CSA 6.0.0.209 on Win2003 Server,
the cluster service is not started.
The server said that the network connection service is not started.
The CSA is registered in the Management Center.
And the group is in LEARN MODE.
What is the source of this problem?First off, do you get any events from that machine in the csamc ? If not, does it solve the problem if you disable csa and try to start the cluster service ? If so, then you could have a deny rule that has no log (even though that is highly unlikely if you are using the default policies) Also what clustering software are you using, microsoft or some other 3rd party sw ?
Jan -
Oracle web tier install+config: opmn does not start after install
Centos 5 box.
After a silent install of web tier 11.1.1.2 opmn will not start. The installation was "complete" but I found some errors in the various log files.
When I try to start a process (for example) using opmn this error occurs in the log file:
[2011-03-31T16:31:49][opmn][TRACE:1][][OPMN]Failed to open wallet (file:/apps/oracle/orahttpserver/as_1/instances/instance2/config/OPMN/opmn/wallet) [default password] (28759)
Command line says unexpected error, code 512 or something to that effect. The given wallet directory is empty.
Checking back through the install & configure logs:
java.lang.NoClassDefFoundError: oracle/security/crypto/core/PublicKey
at oracle.as.config.utl.FileUtil.createSelfSignedOracleWallet(FileUtil.java:697)
at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:631)
at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:667)
at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:558)
at oracle.as.config.impl.OpmnProvisioner.generateWallet(OpmnProvisioner.java:70)
at oracle.as.config.impl.OpmnProvisioner.createOpmnConfiguration(OpmnProvisioner.java:366)
at oracle.as.config.impl.OracleASInstanceImpl.createOpmnConfiguration(OracleASInstanceImpl.java:586)
at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:107)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:137)
at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createStandaloneASInstance(CreateASInstance.java:83)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureInstanceStandalone(WebtierConfigurationAction.java:590)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:441)
at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:174)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: oracle.security.crypto.core.PublicKey
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
... 22 more
The configuration of completed successfully.
Checking a screen shot of someone else's configure output theirs continues beyond
"Bootstrapping OPMN configuration files..."
and correctly generates the instance etc.
I have tried a reinstall, and also tried a generate a new instance using the silent config tool. Same errors each time.
Log also states;
Oracle Instance Home
Instance Home Size: 0 MB (or 40mb)
Available: 0 MB
. This varies between installs and configs but available is always 0. There is Gb's of space available in the directory and the user has write permissions.
Can anyone tell me why it is failing to correctly generate the wallet?Solved. Oracle_home and Instance home must be subdirectories of MIDDLEWARE_HOME. MIDDLEWARE HOME and command to not install updates must be added to response file. Helpful to install and configure separately.
-
Apache does not start after installing the policy web agent
Hi,
We get the following error when we start the apache webserver on linux which has opensso policy agent installed/configured to it.
./apachectl start./apachectl: line 77: 4453 Segmentation fault $HTTPD -k $ARGV
Environment:
OS: Linux SystemName 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:27:17 EDT 2006 i686 i686 i386 GNU/Linux (32 bit)
WebServer: httpd-2.0.50-i686-pc-linux-gnu.tar.gz
Policy Web Agent: Apache_2.0.54_agent_2.2_RHAS3.0.tar.gz
Could not find the issue/solution for this problem on internet... Please suggest if anyone has some solution to this.
Regards
ManojHi,
Once I had an iAS 1.0.2.2 running without problems. However after installing Patch 7 for Forms (released 27 august 2001) I get exactly the same error messages as Pieter. I have tried starting apache as administrator, comment out mod_ose, set wv_gateway_cfg, but none seem to work. Please help.
Environment:
iAS 1.0.2.2 on Windows NT
Oracle 817 on AIX
null -
System not started after installing grid control
HI,
I have installed grid control 10.2.0.1 on 11g r2 on rhel5.After installing grid control, whenever system get booted, it got hanged and saying
after starting up the listener
sql>ora-01078: failure in processing system parameters
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>Hi,
Thanks for the reply!!!
I have installed 11g grid infra on 2 nodes and then try to install 10g grid control on node 1 but when i am booting my system it got hanged and throw an error:
sql>ora-01078: failure in processing system parameter
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>
then i have to forcefully bring down the system and started the linux in a single user mode and thereover i have to move or rename the dir to some other location,then only system get started.after starting up the system i have to again move or rename the grid control dir to org location.
So my question is which file or dir is forcing system to startup the grid control on boot? -
Hello,
I was using up to now InDesign CS3, but I bought the upgrade to InDesign CS 6.
After installing the new version I tried to start it, but during the start it complains about missing plugins and stops.
So, I can not run CS 6.
The missing modules are: SVG Export.apln and Dynamicdosuments.rpln.
What can I do to make CS 6 running?
Thank you,
GunnarHello Mylenium,
thank you for your answer.
I have to admit, that unfortunately I dont understand the reply. I was uninstalling, running the Adobe CS cleaner tool for CS 6, reinstalling (as suggested in other entryies of the forum). No improvement.
Question A: Do I have to run the cleaner tool for all CS including CS 3? I am a bit afraid of side effects and have nothing running afterwards. Since nobody confirmed in the forum that this will help I dont dare to play around.
Question B: Coming back to your proposal, what do you mean by proper admin privileges? I am the only user on this laptop and never did something to any admin configurations.
Finally, I installed CS 6 on another laptop. This works. However, this one I dont want or can't work with for other reasons.
Gunnar -
Exchange replication service not starting after installing Rollup update 3 v3
Hi,
I have installed rollup update 3 v3 for exchange 2010 sp1 on my mailbox server. This mailbox server is a DAG member. After installing update rollup, Microsoft exchange replication service on this server attempts to start & show status started for couple
of seconds & then gets stopped. This behaviuor continues untill i uninstall this rollup. I have installed the same rollup on other DAG member as well with no problem. The following errors are generated in the application logs,
Event ID 4096: The Microsoft Exchange Replication service failed to start the Tcp Listener. Please review the Event Log for more information. The system will attempt to start the service again in 30 seconds.
Event ID 2121: The Microsoft Exchange Replication service failed to start the TCP listener. Error: System.Net.Sockets.SocketException: Only one usage of each socket address (protocol/network address/port) is normally permitted
at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Bind(EndPoint localEP)
at Microsoft.Exchange.Cluster.Replay.TcpListener.StartListening()
Event ID 4999:
Watson report about to be sent for process id: 6000, with parameters: E12, c-RTL-AMD64, 14.01.0289.001, msexchangerepl, M.E.Cluster.Replay, M.E.C.R.ReplicaInstance.TargetGetCopyStatus, System.MethodAccessException, a379, 14.01.0289.001.
ErrorReportingEnabled: True
Event ID 2060: The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB1\SRV-MBX2. The copy will be set to failed. Error:
The NetworkManager has not yet been initialized. Check the event logs to determine the cause.
Event ID 2060:
The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB2\SRV-MBX2. The copy will be set to failed. Error: The NetworkManager has not yet been initialized.
Check the event logs to determine the cause.
Thanks
in Advance!!I hope you are following the best practice to install rollup on DAG.
Suspend activation for the databases on the server being updated.
Perform a server switchover so that all databases on the server are passive copies. There will be a brief interruption in service for the mailboxes hosted on the active databases during the switchover process.
Install the update rollup.
Resume activation for the databases on the updated server.
Perform database switchovers as needed.
http://blogs.technet.com/b/scottschnoll/archive/2009/12/10/installing-update-rollup-1-for-exchange-2010-on-dag-members.aspx
Thanks Uday Kiran,
Senior Consultant
Cyquent Technology Consultants, Dubai
Please Mark as answer if it helps you -
DistributedCacheService not starting after installing CU5
Hello!
I installed AppFabric CU5 (http://support.microsoft.com/kb/2932678) on a VM running SharePoint 2013 (Windows 2012).
After installing (and updating the config file), the AppFabricCachingService no longer starts. The event viewer has the following:
Event ID: 1026
Application: DistributedCacheService.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.TypeInitializationException
Stack:
at Microsoft.ApplicationServer.Caching.VelocityWindowsService.StartServiceCallback(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
Event ID: 1000
Faulting application name: DistributedCacheService.exe, version: 1.0.4632.0, time stamp: 0x4eafeccf
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16384, time stamp: 0x5010ab2d
Exception code: 0xe0434352
Fault offset: 0x00000000000189cc
Faulting process id: 0xa0
Faulting application start time: 0x01cff81d1301034e
Faulting application path: c:\Program Files\AppFabric 1.1 for Windows Server\DistributedCacheService.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 50d61782-6410-11e4-93fe-00155d73c008
Faulting package full name:
Faulting package-relative application ID:
I removed and added the host into the cluster, but it still did not start. I even updated the HOST file to have the fully qualified name.
Any assistance is greatly appreciated.
Thanks,
GregHi,
According to your post, my understanding is that after installing the AppFabric CU5, the AppFabricCachingService could not start.
After installing the update you should do the following in all the servers that are holding the distributed cachec.
After applying the CU, AppFabric uses a nonblocking garbage collection (background server garbage collection).
Nonblocking garbage collection is a new feature in the .NET Framework 4.5.
To apply this fix, follow these steps.
1. Upgrade the servers to the .NET Framework 4.5.
2. Install the cumulative update package.
3. Enable the fix by using the following setting <appSettings><add key="backgroundGC" value="true"/></appSettings> in the DistributedCacheService.exe.config file between
</configSections>
<appSettings><add key="backgroundGC" value="true"/></appSettings>
<dataCacheConfig>
4. Restart the AppFabric Caching service for the update to take effect.
Note :By default, the DistributedCacheService.exe.config file is located under the following directory:
%ProgramFiles%\AppFabric 1.1 for Windows Server
For more information:
http://blogs.msdn.com/b/calvarro/archive/2014/03/20/points-to-consider-with-distributed-cache-on-sharepoint-2013.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
I used Exchange 2013 SP1+CU5 to install Edge role on Windows server 2012 R2 workgroup machine
then after installation the service "Exchange server health Service" was not starting automatically or manually with the following error "Error 1075: The dependency service does not exist or has been marked for deletion"
and in the Event Viewer I have this error:
Event Id: 7003
The Microsoft Exchange Health Manager service depends on the following service: MSExchangeADTopology. This service might not be installed.
please adviceThe Exchange 2013 Edge Role has a reduced set of services compare to a CAS or MBX server role:
Active Directory Web Services
Microsoft Exchange ADAM
Microsoft Exchange Anti-spam Update
Microsoft Exchange Diagnostics
Microsoft Exchange Credential Service
Microsoft Exchange Health Manager
Microsoft Exchange Service Host
Microsoft Exchange Transport
Microsoft Exchange Transport Log Search
The above one was from Exchange 2013 Sp1. Not sure whether Microsoft Exchange Health Manager service has been replaced from CU5.
Just restart the edge server once again and ensure that you are able to see this service again in services console.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
ITunes will not start after installing newest version
After installing the newest version of iTunes, I click on the iTunes icon and the license agreement flashes on the screen and disappears before I can click on the agreement. I am running Windows 2000 professional edition. Quick time will also not start. I have uninstalled and reinstalled several times, with and without firewall software running. Nothing seems to help.
hi Rachel!
No error messages, nothing. The hourglass is next to the mouse for about 3 seconds.
okay, if it's not NIS 2005 related, let's first check up on this:
http://docs.info.apple.com/article.html?artnum=302386
... but by the sound of it, you might need to check on this:
http://docs.info.apple.com/article.html?artnum=302538
if it turns out to be a weird start-up item to blame, would you mind letting us know what it's called? (there's a hint that there's a new kind of malware out there causing "the flash" and possibly some other start-up problems.)
keep us posted.
love, b -
Dreamweaver CS3 not starting after install
My previous Acer computer (Intel dual core, 2gb ram, XP Pro SP3) ran DW just fine, but it died a hardware death. My new computer is an HP 6005 Pro, pre-installed with an XP Pro (SP3) downgrade, AMD dual core 2.8 gb processor, 1.75 gb ram...
The install went fine, but when I click on the icon (either the shortcut or the exe in the root folder) nothing happens. The hourglass starts for a few seconds then disappears and nothing. My other Adobe software includes PS CS2, Audition, PS 6, Bridge and Bridge CS3 (this versionof Bridge is from the DW CS3 insatll...PSCS2 is an upgrade so I had to install PS 6 first then the upgrade. Is PS6 and Bridge interfering and/or can I uninstall PS6 and Bridge?)
Where do I go from here? I'm praying it's not an incompatiblity with the AMD processor!! I built and published my website with this DW and I'm stuck!!!
Thanks,
HG GuyPZ,
I tried a re-install with both firewall and antivirus turned off (ZoneAlarm and Avira). No change, Dreamweaver will not start (but shows up in the Process tab in Task Manager) and will not allow Photoshop CS2 to run (i.e. Ps starts but freezes when opened) until the Dw process is stopped. Bridge CS3 will open and did open a file after a second attempt in Ps (the first resulted in the usual freezing of Ps), but after closing Ps and restarting Ps once again would freeze until stopping in Task Manager. Stopping Bridge in Task Manager would then allow Ps to open normally. Adobe Device Central will open but will not close except through the Task Manager. Extension Manager opens and closes fine and doesn't interfere with Ps
I can click on Dreamweaver (which does not start but is listed in the Process tab) and then open Photoshop 6 and use it with no problems.
Very frustrating! Something in CS3 is interfering with CS2!
I did download and ran the Adobe Support Advisor. It reported:
the module found no solutions to report for the selected log file.
If you continue to have difficulties with the application,
please contact Adobe Support: http://www.adobe.com/support
System Information :
Operating System = Windows XP Professional Service Pack 3
Locale = en
Although when I exit the program I get this:
Creative Suite Product Install Inspector has identified an issue that needs attention.
An issue report has been generated.
Adobe will use this issue report to help address this issue in the future.
Also when I click on the "package for support" to generate a key for support it quites at 30% and says information is too large for this configuration and to go to Adobe Support for more information...
So what should I do next? Call an Adobe tech support person?
Is this maybe a problem with XP SP3? I have read in places that SP3 introduced anomolies, should I roll back to SP2 (if I even can?)
HG Guy -
Apache not starting after installing Lion
After installing Lion, my Apache local service doesn't start anymore.
in System Preferences > Sharing, the Web Sharing is not checked anymore.
If I (try to) check it, it try for half a second, and then is unchecked again.
No error message. I also reinstalled the last Xcode package, rebooted, nothing.
What to do? Thank you!Commenting out that line simply disables mod_fastcgi (which might caus performance problems under a load).
In case you really need the mod_fastcgi to speed up apache2 you can easily compile and install it given you have the xcode development env installed.
(i've chosen the latest version which is a snap but still roughly 2 years old.)
cd /tmp
curl -O -L http://www.fastcgi.com/dist/mod_fastcgi-SNAP-0910052141.tar.gz
tar zxf mod_fastcgi-SNAP-0910052141.tar.gz
cd mod_fastcgi-SNAP-0910052141.tar.gz
cp Makefile.AP2 Makefile
make topdir=/usr/share/httpd
sudo make install
this will install the apache mod_fastcgi.so into apples apache2 install and you should be able to continue with a fastcgi setup.
So far this has worked for me w/o any problem.
cheers
udo
Maybe you are looking for
-
after upgrading my iphone 4 to IOS5, it doesn't appear on "Itunes", and also i cann't transfer photos on "iphoto", .., so i cant load, save or erased anything now!
-
Hi Gurus, After Searching information regarding usage of the T-code Sm58 I got to know much. But still there is a confusion on How to use the same. As when I am executing the t-code sm58 the screen comes with the tabs as 1. DISPLAYED PERIOD 2. USER N
-
Is it possible to embed fiori launch pad into portal?
Hi guys, I'm not familiar with fiori launch pad, how does it work. But I need a quick feasibility check: is fiori launch pad some kind of an application url? Can I embed it into somewhere in my company portal? Regards, Aaron.
-
Compressor on Intel vs. PPC
On my old dual 1GHz G4, using the version of Compressor that came with DVD Studio Pro 2, it takes about five hours to encode one hour of video at the "high quality" setting. I'm contemplating the purchase of a Mac Pro tower and the current version of
-
Division of doubles wrong?
Ok. I just came across this wierd thing and wasn't sure why it was happening. Basically, if I divide the number 33.333 by 11.111 I do not get 3 if either of the numbers is a double. For instance, division of 33.333/11.111, 33.333f/11.111, 33.333/11.1