Xserver troubles after 11/06 upgrade

After 11/06 upgrade, changes in X seem to preclude 1600x1200x24.
System is a K8M based ASUS / AMD64 dual core, with VIA Unichrome S3
I have a Nokia 445Xi monitor.
This has been supported since solaris 9 at least. It now only works in 1024x768 mode.
I suspect this is due to the reorganization in the /usr/X11 tree. Something just got left out, I suppose. Specifically, it seems that the X configuration now thinks the monitor isn't compatible.

Maybe during mogration some settings were incorrect, you should try to configure with kdmconfig.

Similar Messages

  • Trouble after 3.0 upgrade: wifi, bluetooth and temperature

    I have an iPhone 3G.
    Today, after the 3.0 upgrade, the wifi and bluetooth stoped working.
    In preferences appear like a light gray color and don't allow access to adjustments.
    And the temperature of the iPhone body is very hot after the use.
    I reisntalled 3 times, but wiyjout success.
    I'm very sad. Is my iPhone dead?

    kido97 wrote:
    I do had very high confident to Apple products previously, but this update give me tons of trouble, I tried to "R e s t o r e", but do you know what restore means? It means restore my Apps, not my original iPhone with OS2.2.1.
    Frustrated hk user.
    No, restore will restore back to 3.0 as 2.2.1 is no longer available. I had a few problems with 3.0 but i restored it and set it up as a new iphone which made my iphone run SWEET. I would try that before you went to Apple. Going to the Genius battle is really a last resort after the restore. Hope it works.

  • Ipod troubles after 1.3 upgrade

    I connected my 60gb ipod to itunes. I installed the firmware 1.3 update on my ipod. After that, my ipod went into disk mode on its own, and a pop-up said I needed to restore my ipod with itunes. I restored it.
    Now the tracks (encoded at m4a 256 bitrate) only play one minute or so, and move on to the next track. My ipod is not in shuffle mode, but this is very annoying. I have had my ipod for two years (as of next week), so I don't know if the battery indicator could be wrong, and it's really lower than it shows?
    I that other people having the same problem with songs skipping. Is this a bug of the 1.3 update?

    I had the same problem with both 1.2.3 and 1.3 upgrades. Both times I was able to successfully downgrade to 1.2.1, and that fixed the problem. (I don't have the details on the downgrade process, but there have been several messages here about that recently.)

  • Illustrator CS4 trouble after installing Lion upgrade

    "An unknown error has occurred" message when attempting to open Illustrator cs4 file after upgrading to Lion.
    I'm using a Mac Pro early 2008
    Processor  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory  10 GB 800 MHz DDR2 FB-DIMM
    Graphics  NVIDIA GeForce 8800 GT 512 MB
    Software  Mac OS X Lion 10.7.2 (11C74)
    I have the entire CS4 Master Collection on this machine.
    Have not tried the other programs yet.
    Any help on easing this transition will be appreciated.

    Found this link: http://support.apple.com/kb/DL1421
    After downloading the Java for OS X Lion Update 1 Illustrator is now working.

  • Mail is giving me trouble after upgrading to OS X 10.10

    Mail is giving me trouble after upgrading to yosemite. I am unable to enter settings and change email settings. Can someone please help.

    I have had the same issue (and I've seen many posters on here mention this, as well). I have an external FireWire drive that, since upgrading to 10.4.9 is not recognized by my G4 PowerBook. It worked fine before the update. Some have said the issue may have occurred if the drive was connected to the computer at the time of the upgrade but mine was not. I'm patiently waiting Apple to fix this and many other apparent flaws with the latest so-called "upgrade."
    P.S. I have never had any issues with previous OSX updates and have been a Mac user for 3+ years.

  • Trouble with wifi after IOS 6 upgrade

    I have an iPhone 4 and successfully installed iOS 6 today.  I am having trouble getting on my home wifi.  When asked to join my network, I click on it and type in my password.  Shortly after typing in my correct password an apple.com login page loads from the bottom of the iPhone but says "hmm, the page you're looking for cant be found".  The only option I have is to push cancel and then it ends my wifi connection with my own home network.  Help please. 

    burhansheikh replied to Trouble with wifi after IOS 6 upgrade
    "guys i have 100% solution copy Wi-FI address from about(general)(setting) & paste to Client ID in your network (Wi-FI) (setting)"
    in Using iPhone • 8 replies
    1

  • Big trouble after upgrade 10.10 and 4.0: No sync Calendar and Contacts between devices and users

    Hello,
    it is a big trouble after upgrade 10.10. an 4.0 (i paid 18 € again!):
    After the update no sync between devices an user for calendar and contacts possible. Asking a password?
    No device manger started. Error code -1!; Open Directory Service no started.
    Help?

    I ended up exporting all the outlook data to CSV, creating a new PST and reimporting the data. Calendar sync now works, but I sure do hope I don't have to redo this every week.

  • AIA 2.0.1 O2B Order synchronization fails after the SOA Upgrade to 10.1.3.4

    Hi,
    I have the AIA 2.0.1 installed on the system with the Order to Bill PIP flow working fine until I upgraded the SOA Suite from 10.1.3.3 to 10.1.3.4.
    After the SOA upgrade the order synchronization from CRM(8.1.1) to BRM(7.3) fails with the error message
    "exception on JaxRpc invoke: HTTP transport error: java.net.MalformedURLException: no protocol: eis/BRM"
    I have checked the Application Server for the availability of BRM Adapter.
    The BRM Adapter is available and properly configured. The JNDI Location for the BRM Adpater is eis/BRM itself.
    Can anyone please help resolve this issue.
    Thanks in Advance

    Don't upgrade your Leopard clients. While running Xsan 1.4.2 on G5 Xserves running 10.4.11 works, it is preferred to keep your server running a newer OS than the clients. Again, Mac OS X 10.5.2 does work with Xsan 1.4.2 and MDCs running 10.4.11 but who knows if an upgrade will break this? Alternatively you could buy a couple seats of Xsan 2 and change your controllers to be newer intel Macs (Mac Pro or Xserve).

  • No status messages for any components after 2012 SP1 upgrade

    Hi, after a recent upgrade to 2012 SP1 two of my sites no longer show any status messages in monitoring. All the services seem fine, I can distribute and deploy packages to clients, run queries etc.
    All other sites are now fine, the difference is the working sites are on 2008 R2 or 2012 and the trouble sites are on 2008 Storage Server SP1. So obviously close at hand to assume the Site Server OS is somehow the culprit.
    SP2 is installed on all sites for SQL Server 2008 R2, servers have been restarted.

    There we go!
    So sender.log had these:
    There is no existing connection, Win32 error = 7054
    and
    Error during connection to \\primaryserver.domain.local\SMS_SITE (7054).
    As mentioned already, I already verified the secondary site computer accounts were in the SMS_SiteToSiteConnection_XX1
    on the primary site server. But I added my main SCCM service account there as well and under Administration\Hierarchy Configuration\File Replication I changed the File Replication Account from the computer account to the service account and the status messages
    are now transfered and appearing in the Status Message Viewer.
    I don't really care why the computer account wouldn't work, I'm just going to leave it like this, the 2008 Storage Servers
    are due to be replaced or upgraded this year anyway.
    Thanks Juke and everyone else!

  • Sony Xepia give me so much trouble after 18 days

    I went to the Vodacom shop @ Cape Town Waterfront on the 31st of August 2013 to get my new upgrade. Then on the 16th of September I phone that store no one answer the phone at about 19h30. The next day the 17th September I took my phone to the Green Point Vodacare shop. What amazing service. http://www.cellucity.co.za/fastaid.htm  They pointed out to me that my Black Berry Service was never cancelled & so was my insurance not cancelled as well.
     Been dealing with [email protected] from the Waterfront he put me on to Herman. Then two days later after about 15 emails & 5 more phone calls. Herman from Vodacom V&A phone me. He was very help full & gave me a Samsung handset that could get emails. In between this I get a call that my new Sony Xepia  has to go to Johannesburg for high-end service, I only had it for 18 days.. Was so happy with my Black Berry for two years & now this Sony Xepia give me so much trouble after 18 days. I am so disappointed, in this whole experience. Wish I never gave up my Black Berry. My Job number 9205308-08262819

    I don't quite understand what is it that you need help with?
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • VPN Stopped working (consitently) after 2.2 Upgrade

    After upgrading to the 2.2 firmware, I started to experience a lot of trouble getting my VPN connection to work. It is attempting to connect to my PPTP server, and worked fine before. I tried changing from a host name to an IP address, and that didn't help. I've also done some restarts, but nothing seems to work. On my PPTP server, I can see an incoming connection, but the iPhone just sits there in the "Connecting ..." state. Eventually it times out and says "Network Not Available". Every once in awhile, it does connect, but it's rare.
    Has anybody else experienced this? Any suggestions other than update the firmware in my firewall (which isn't really an option, or necessary I'd say).
    Thanks.
    Greg

    Steven, yes, that is the case. I am not using an RSA Secure ID. All of the other settings you listed are what I'm using.
    As an additional note, I got the Network Utility (by Codepacity) program from the app store. It allows you to (among other things) ping sites. When I used that to ping my PPTP server, I saw that the ping attempts were failing. I kept running it until the pings started to succeed and was then able to get my VPN connection working; it was a long time before the pings started working. It may be that AT&T's network was having issues, and it was just coincidental that the problems started after my firmware upgrade. That is just speculation though.
    Greg

  • Microphone supersensitive on 3G after 3.0 upgrade

    First day of ownership and the microphone is creating tin-can/ robot/echo effect after 3.0 upgrade when in regular mode whether or not using the headphones mic. I tried to trouble shoot and it seems the microphone is SUPER, SUPER-sensitive. Oddly enough- If I hold my finger over the SPEAKER, the sound is almost perfect.
    I have not tried to re-boot- this is the first day I have owned it.
    Any solutions?

    I have the same problem! I upgraded to 3.0 and now I don't have service. At times, my iPhone3G shows full bars but no '3G' logo and I cant use anything involving the internet. Even worse, it will say 'searching...' and ultimately say 'no service' in places where I had service yesterday!! Why did the 3.0 upgrade take away my service? Help anyone?

  • Cannot send emails from Hotmail on my iPad appears only after iOS 7 upgrade.

    Cannot send emails from Hotmail acc on my iPad, problem occurred after iOS 7 upgrade. Message appears that user name or password is incorrect in settings but they are correct when checked.

    Try deleting and reinstalling your Hotmail email account.

  • Exchange mail after iOS 8 upgrade not working

    exchange mail after iOS 8 upgrade not working.
    I can not get email from my exchange account.
    Any suggestion?

    Just had this issue.  I turned WIFI off and it connected fine.  Then turned WIFI back on and working as always.
    It had something to do with the WIFI conflicting with the exchange server.

  • Ipad locks up after iOS 8 upgrade

    WWhy does ipad lock up in safari after iOS 8 upgrade

    (A) Try reset iPad
    Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
    Note: Data will not be affected.
    (B) Close all apps in the multi-task window
    1.Double-click the Home button.
    2. Swipe the app's preview up to close it.
    3. Preview will fly off the screen.

Maybe you are looking for

  • Replace a file which has a specific ID with another one

    I want to replace a file with another one using JSOM, but preserving all other associated fields (like Author and other custom columns in the document library) How can I select the file I want to replace using the ID field? For example, when I update

  • Oracle Apps Adapter Issue

    Hi All,   when i am trying to create the oracle app adapter in jdeveloper , I am getting the following error. java.lang.nullpointerexception at oracle.tip.tools.ide.adapters.designtime.adapter.apps.iRep.IRepStartPage.buildWSDL(IRepStartPage.java:1508

  • Making the background white

    Can someone help me make the background of my application white ? All it does is display a simple curve in a window. Here's the structure: public class Curve public static void main(String[] args) JFrame window = new JFrame(); CurvePane pane = new Cu

  • Green screen keying not working?

    Hey I am messing around with green screening and on my computer at home it was working fine. Now (with the same footage) at my school campus.  When I apply keying and select a color... nothing happens. I tried moving every slider in the inspector and

  • Adobe Live Cycle 8 grace Period Problem

    I had Adobe Acrobat ver. 5 which I was unable to uninstall due to some corrupt files. Then I tried to install Adobe Acrobat Professional ver 8 . It popped up an error message that You already have a version of adobe which is to be removed. Hence I fo